Oracle Retail J2EE version

Hi All,
Can any one advise me Java version used in RIB 13.1 & RPM 13.1. (Java version and J2EE version). Is Annotations been used in the same?
Regards,
SK

check e.g. document 1081376.1 on oracle support:
RIB 13.1.1 - Oracle Application Server 10g 10.1.3.4
RPM 13.1.2 - Oracle Application Server 10g 10.1.3.4
The Oracle Application Server (this is not BEA Weblogic) provides the containers to run the J2EE applications in.
Please see relevant OAS version's documentation for the applicable J2EE version.
Best regards, Erik Ykema

Similar Messages

BPM standalone and J2EE versions

What is the diffrence between BPM standalone and J2EE versions
and
What are the advantages of Using J2EE Version over standlone?
In configuration document it is mentioned that we need to deploy wlj2eedeployer.ear on weblogic server.
Why this deployment?
Thanks

Depending on your needs, the Engine can be deployed using two different implementation styles.
Standalone Oracle BPM Enterprise Engine
Oracle BPM can be deployed in a standalone environment running on a JVM. This is the original version of the Engine and has been around for 10 years.
The benefits of deploying processes to Enterprise Standalone are:
<li> It does not require an application server J2EE container to run. This means a lower cost of entry if you do not already own WebLogic or WebSphere J2EE application servers.
<li> It is simple to install and administer.
Enterprise Standalone uses a simple active/standby failover mechanism. When the active engine starts, it immediately registers in the Oracle BPM Directory that it is the primary engine. When the standby engine starts on another machine, it sees that another engine has already registered as the active server in the Oracle BPM Directory. Since the active engine is already up, the standby knows that it needs to ping the primary engine periodically to ensure it is still up. If the standby engine fails to get a response from the active engine, the standby notifies the Directory that it is now the active engine. When what was previously the active primary engine restarts, it notifies the Directory that it has restarted, sees that another server is now the primary and then starts as the secondary.
J2EE Application Server Oracle BPM Enterprise Engine
Oracle BPM Enterprise engines can also run on a J2EE application server within WebLogic and WebSphere containers.
Oracle BPM Engines running on a J2EE Application Server support active clustering. This means that as loads increase over time, new nodes can be added making the environment more scalable over time.
With the J2EE Application Server environment automatic failover is automatically provided across nodes.
Finally, in answer to your last question - the deployed wlj2eedeployer.ear is useful because this lets you stop and start the Engine and deploy projects from the simple (ok - somewhat simple) Oracle BPM Process Administrator tool.
Hope this helps,
Dan

Oracle Retail Allocation(14.0) is not opening after installation.

Hi All,
I have installed Oracle Retail Allocation(14.0) successfully. When I am trying to access the home url:
http://192.168.0.225:18010/alloc14/faces/pages_home
getting following error:
=====================================================================================================================================================================
####<Sep 30, 2014 8:08:06 PM IST> <Error> <HTTP> <192.168.0.225> <aloc-server> <[ACTIVE] ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000KZ6zn47FGBWFLzyGOA1KAfYz00001f> <1412087886161> <BEA-101017> <[ServletContext@1724426511[app:alloc14 module:alloc14 path:/alloc14 spec-version:2.5 version:V2.0], request: Workmanager: default, Version: 0, Scheduled=true, Started=true, Started time: 75 ms
GET /alloc14/faces/pages_home?_afrLoop=112769119548580&_afrWindowMode=0&_afrWindowId=null HTTP/1.1
User-Agent: Mozilla/5.0 (Windows NT 6.1; rv:31.0) Gecko/20100101 Firefox/31.0
Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8
Accept-Language: en-US,en;q=0.5
Accept-Encoding: gzip, deflate
Referer: http://192.168.0.225:18010/alloc14/faces/pages_home?_afrLoop=111228698269807&_afrWindowMode=0&_afrWindowId=null
Cookie: JSESSIONID=hM11Jq6JsR70LXtHQpcpnw7zBDNslZkDnh7RKvgpTzyGZC0QrSQ2!2047385718
Connection: keep-alive
]] Root cause of ServletException.
java.lang.NoSuchMethodError: oracle.adf.view.rich.context.AdfFacesContext.getOutputModeEnum()Loracle/adf/view/rich/context/AdfFacesContext$OutputMode;
        at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._isPostback(LifecycleImpl.java:715)
        at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._restoreView(LifecycleImpl.java:789)
        at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:422)
        at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:207)
        at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
        at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
        at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
        at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
        at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.portlet.client.adapter.adf.ADFPortletFilter.doFilter(ADFPortletFilter.java:32)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.webcenter.framework.events.dispatcher.EventDispatcherFilter.doFilter(EventDispatcherFilter.java:44)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.retail.apps.rpf.framework.wc.filters.RpfGeneralSettingsLocaleFilter.doFilter(RpfGeneralSettingsLocaleFilter.java:48)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.adf.view.page.editor.webapp.WebCenterComposerFilter.doFilter(WebCenterComposerFilter.java:117)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:128)
        at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
        at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
        at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
        at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)
        at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
        at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.wcps.client.PersonalizationFilter.doFilter(PersonalizationFilter.java:75)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.webcenter.content.integration.servlets.ContentServletFilter.doFilter(ContentServletFilter.java:168)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.webcenter.lifecycle.filter.LifecycleLockFilter.doFilter(LifecycleLockFilter.java:151)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:180)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
        at java.security.AccessController.doPrivileged(Native Method)
        at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)
        at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)
        at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
        at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
        at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
        at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
        at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
        at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
        at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
        at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
        at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
        at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
        at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
==========================================================================================================================================
Please find the application details below:
Operating System : Red Hat Enterprise Linux Server release 6.0 (Santiago)
Database Version : 11.2.0.3.0
RMS : 14.0
ReA : 14.0
Oracle ADF : 11.1.1.7.0
Any help would be appreciated.
Thanks & Regards
Prabhakar

Hi,
I have successfully installed Allocation 14.1 with following component. Is it necessary to install it in RMS database 14.1 coz i m getting an error after login into ALLOCATION application like
ORA-06550: line 1, column 7: PLS-00201: identifier 'ALLOC14DEV.RETAIL_CTX_PKG' must be declared ORA-06550: line 1, column 7: PL/SQL: Statement ignored
Installed component:
weblogic server(WLS) : 10.3.6
oracle IDM : 11.1.1.6
ADF libraries installed on WLS : JDEVADF_11.1.1.7.0_GENERIC_130226.1400.6493
RMS database : 14.0
RCU : 11.1.1.7
webcenter : 11.1.1.7
Thanks

Oracle Retail R13 silently released April 17

Hi,
At OAUG Collaborate08 conference in Denver it was announced that Oracle Retail would be released April 17 in a "silent release" - not too much media covering.
Indeed one can now find several R13 media packs at edelivery.oracle.com (licensing requirements of course apply there.)
I believe that a later release will receive more media coverage, I forgot whether that was about extended Fusion integration or about new features, or....
Four (patch) releases on R13 are announced to be released in 2008.
The list of applications for R13 currently includes
- RMS
- RSL
- RETL
- RDW
- Allocations
- SIM
- ReIM
- Oracle Retail Workspace (WebCenter)
- RIB (SeeBeyond replaced with Oracle JMS/AQ, TopLink, Stateless Session Beans and Message Driven Beans, OAS).
- RWMS
and several others.
All GUIs have been remodelled to the uniform SWAN UI standard.
It was said on Collaborate08 that this would be the Linux release, subsequent AIX, Solaris, HP-UX to follow this summer. I believe that not every software component in the stack differs significantly per OS.
The media sets that I downloaded include a full documentation set.
Please also see on MetaLink:
Overview Of Features And Enhancements Included In Release Version 12 And Assess Benefits Of Upgrading To Version 13
Doc ID: Note:465089.1 Type: REFERENCE
Last Revision Date: 30-OCT-2007
The documentation on http://www.oracle.com/technology/documentation/oracle_retail.html has yet not been extended with the R13 sets.
Nor have any patches been publicly published on MetaLink, though the release guide(s) do mention some known issues in the release(s). Some are being worked on, some patches are available on request.
Regards,
Erik Ykema

Hi,
Just want to bring to your attention
http://download.oracle.com/docs/cd/E12462_01/merchandising/docset.html
in there is a pointer to "Data Conversion Operations Guide".
Highlevel this defines a series of more or less general staging tables for some entities, with corresponding batch programs that read the staging tables into the target RMS tables.
Entities like POs, Shipments, transfers etc. all are considered to be closed before migration, if I recall correctly.
Some entities are not in this DCOG and need custom treatment.
Also the following Metalink Notes may be of interest:
Note:563313.1
Note:725888.1
Also our System Integrator, Wipro Retail, has another approach, where they have a more or less reusable toolkit that is customized to the customer requirements and handles the whole lot.
I believe that on the Oracle Retail roadmap is a concept called 'scripted upgrades' which, according to the Oracle Retail Lifetime Support Policy (see PDF at oracle.com), should be available from R12 or R13 onwards, however I haven't seen it yet.
Regards, Erik Ykema

Weblogic 12c - J2EE version

Hello,
I am migrating our J2EE 1.4 apps from Websphere to Weblogic as part of an evaluation.
I am trying to deploy a J2EE 1.4 application into Weblogic 12c. I see strange classloader exceptions. Is this because Oracle 12 c does not support J2EE 1.4?
If yes, can you please help me on the following :
1. Where can I find the Weblogic servers vs supported J2EE versions?
2. What are the version of Weblogic app servers are suitable for J2EE 1.4?
3. I noticed Weblogic 12c has a feature called 'SmartUpgrade'. I am exploring if this will help me anyway.
Thanks in advance,
Rajesh

Hi Lawrence,
I believed backward compatiblity will be present. We don't use weblogic APIs, as this is the first time we are moving to Weblogic. The Error in the sever_0.log file is as follows:
When processing WebService module 'XXX-stp-web.war'. Failed to load servlet Class: com.XXXsolutions.stp.manager.web.ABCManagerServlet
Ignoring: unable to load class:java.lang.ClassNotFoundException: com.XXXsolutions.stp.manager.web.ABCManagerServlet at: weblogic.xml.schema.binding.util.ClassUtil.loadClass(ClassUtil.java:76)
When processing WebService module 'XXX-stp-web.war'. Failed to load servlet Class: com.XXXsolutions.stp.manager.web.ABCManagerServlet
Ignoring: unable to load class:java.lang.ClassNotFoundException: com.XXXsolutions.stp.manager.web.ABCManagerServlet at: weblogic.xml.schema.binding.util.ClassUtil.loadClass(ClassUtil.java:76)
<03-Jan-2013 15:40:58 o'clock GMT> <Error> <javax.enterprise.resource.webcontainer.jsf.config> <BEA-000000> <Critical error during deployment:
com.sun.faces.config.ConfigurationException:
Source Document: file:/C:/Projects/wlsdomain/servers/Server-0/tmp/_WL_user/XXX-stp/isz0wh/war/WEB-INF/faces-config.xml
Cause: Unable to find class 'com.sun.facelets.FaceletViewHandler'
     at com.sun.faces.config.processor.AbstractConfigProcessor.createInstance(AbstractConfigProcessor.java:273)
     at com.sun.faces.config.processor.ApplicationConfigProcessor.setViewHandler(ApplicationConfigProcessor.java:541)
     at com.sun.faces.config.processor.ApplicationConfigProcessor.processViewHandlers(ApplicationConfigProcessor.java:861)
     at com.sun.faces.config.processor.ApplicationConfigProcessor.process(ApplicationConfigProcessor.java:334)
     at com.sun.faces.config.processor.AbstractConfigProcessor.invokeNext(AbstractConfigProcessor.java:114)
     Truncated. see log file for complete stacktrace
Caused By: java.lang.ClassNotFoundException: com.sun.facelets.FaceletViewHandler
     at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:297)
     at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:270)
     at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:64)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:423)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:356)
     Truncated. see log file for complete stacktrace
Thanks,
Rajesh

Oracle Retail Standard Edition

Can anyone give any info about Oracle retail Standard Edition or Oracle Retail Mid Market.

Hi,
Metalink has the following notes that may be of interest:
- Note:455477.1 15-NOV-2007 - Oracle Retail Business Process Documents for use while implementing the Oracle Merchandising Products (sounds like standard edition, though the phrase isn't used here)
- Note:465089.1 30-OCT-2007 - Appendix B - Further detail on Standard Edition (version 12.0.3)
Regards,
Erik

Need to connect to upgraded Oracle EBS R12 version from R11. The current ODI set up is pointing to R11, Can i use the same connection to point to R12? Please hele experts..

Need to connect to upgraded Oracle EBS R12 version from R11. The current ODI set up is pointing to R11, Can i use the same connection to point to R12? Please hele experts...
Rp

1. in physical connections part can i use the same work schema
2. Can i use same contexts created or do i need to create everything as new and then try?
Thanks,
Rp.
Hi,
As you mentioned that you just upgraded the database, so the data is same and schema is same you can connect with the same work schema.
Yes, you can use the same contexts , but need to do Reverse Engineering for your new database.
And about data server, i think you also have no need to create new data server, if hostname,sid and port etc are same as these were with R11(consult with your DBAs regarding it)

How can I generate SSL Keys from a Oracle 9iAS server version 1.0.2.2.0

How can I generate SSL Keys for use on Oracle 9iAS server
version 1.0.2.2.0. I have tried using the open_ssl method but
was unsuccessful.

<?xml version="1.0" encoding="UTF-8" ?>
<nodes>
<node>
<category_id>3</category_id>
<parent_id>2</parent_id>
<name>Mobile</name>
<is_active>1</is_active>
<position>1</position>
<level>2</level>
<children>
<node name="Nokia" category_id="6" parent_id="3" is_active="1" position="1" level="3">
<node name="Nokia N79" category_id="7" parent_id="3" is_active="1" position="2" level="3" />
<node name="Nokia N95" category_id="7" parent_id="3" is_active="1" position="2" level="3" />
<node name="Nokia N97" category_id="7" parent_id="3" is_active="1" position="2" level="3" />
</node>
<node name="Samsung" category_id="7" parent_id="3" is_active="1" position="2" level="3">
</node>
</children>
</node>
<node>
<category_id>4</category_id>
<parent_id>2</parent_id>
<name>Laptop</name>
<is_active>1</is_active>
<position>2</position>
<level>2</level>
<children></children>
</node>
<node>
<category_id>5</category_id>
<parent_id>2</parent_id>
<name>Monitor</name>
<is_active>1</is_active>
<position>3</position>
<level>2</level>
<children></children>
</node>
<node>
<category_id>8</category_id>
<parent_id>2</parent_id>
<name>Camera</name>
<is_active>1</is_active>
<position>4</position>
<level>2</level>
<children></children>
</node>
</nodes>
Is this correct format to create dynamic menu?

Oracle forms 10G -Version 10.1.2.0.2 will it support timestamp data type ?

Hi all,
We are having database server - oracle 10g enterprise edition R2,
forms - Oracle forms 10G -Version 10.1.2.0.2 on windows 2000 professional.
We have created a table which has a column of type "timestamp",the following is the structure.
CREATE TABLE "STOCK_AREA_MASTER"
        (     "STOCK_AREA_CODE"     NCHAR(5)       NOT NULL    ENABLE,
              "STOCK_AREA_DESC"     NVARCHAR2(40) NOT NULL    ENABLE,
              "RECORD_STATUS"       CHAR(1)        DEFAULT 'A',
              "USER_ID"             NVARCHAR2(20) DEFAULT USER,
              "TIMESTAMP"           TIMESTAMP (6) DEFAULT CURRENT_TIMESTAMP)
[\code]
We tried to invoke this table(stock_area_master) using database block wizard in forms 10g,we were expecting to see the columns in this table,but we got the following error
FRM -10095 - Assertion failed
on seeing the forms help for the error FRM-10095,We are getting the following message
FRM-10095: Assertion failed in %s, at %s:%d. Cause:  An internal inconsistency was detected. Action:  Contact an Oracle support representative, and proceed with caution
We have the following concerns.
1.) is it possible to have datatype "timestamp" in forms 10g,our researches show that we can manipulate using datatime datatype in forms,our requirement is have to precision of 6 digits(millisecond - format - dd/mm/rr hh24:mi:ss:ssss),we are able query and view precision to the tune dd/mm/rr hh24:mi:ss:ssss,but we are unable to insert/update to this precision.
We would appreciate if some one could throw some light on the above.
Thanks in advance
Regards
Mohan

Hi Mohan,
Hm. Strange.
I have reproduced the problem in my environment.
I have also found, that building the block manually, seems to work, as long as you define the item with datatype Char in Form Builder. Inserts and updates using a value like "22-AUG-06 11:10:11,647354 AM" worked fine for the timestamp item.
You may want to enforce some dateformat. I don't know whether that will work.
Good Luck!
Remco

Oracle RDB driver Version 3.01.00.01 Connectivity Issue

I have a SQL Server 2000 extended stored procedure connecting to an Oracle RDB data server via an ODBC connection (using Oracle RDB driver Version 3.01.00.01). The SQL Server 2000 runs on a Windows 2000 Server.
This extended stored procedure opens up multiple database connections and maintains them for processing. Usually, everything runs fine.
However, every so often, we have connectivity issues. What happens is as follows:
When we bring a station down and then try to reconnnect, our connection is denied, and we get the error: "recv() unexpected close Ret 0 Err#0 UNKNOWN Unknown WINSOCK Error 0". (This error is logged by the .dll running in the SQL Server processing space.) From the first time we receive a connectivity error like this until the Oracle RDB box is rebooted, we cannot establish another new ODBC connection to that Oracle RDB box --- whether we are trying to establish it programmatically or just via a "test connection" in the ODBC dialogue on the SQL Server box.
We can, however, establish an ODBC connection to another, identically configured, Oracle RDB box from the SQL Server box (without restarting the SQL Server box).
Has anyone had experience with instable connections from Windows system using the Oracle RDB driver to connect to the Oracle RDB? If not, can anyone point me in a direction that would help me research this? I am more familiar with SQL Server than Oracle, and the Oracle DBA on the other end isn't very accessible.
I'd really appreciate any help anyone can give me.
Thanks!

I got same error.. Are you already solve that problem? how? please help me. Thanks

Oracle XE Western version not working on Windows XP pro

I have noticed that production version of the Oracle XE Western version does not work properly. The beta version created the database properly, the production version does not. I tried to install it on a Windows XP Pro version.
Below is the alert_xe.log
Dump file c:\oracle\xeprod\app\oracle\admin\xe\bdump\alert_xe.log
Thu Mar 30 11:38:32 2006
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows XP Version V5.1 Service Pack 2
CPU : 1 - type 586
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:533M/1023M, Ph+PgF:2253M/2461M, VA:1945M/2047M
Thu Mar 30 11:38:32 2006
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Shared memory segment for instance monitoring created
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 285212672
control_files = C:\ORACLE\XEPROD\ORADATA\XE\CONTROL.DBF
compatible = 10.2.0.1.0
db_recovery_file_dest = C:\oracle\xeprod\app\oracle\flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
audit_file_dest = C:\ORACLE\XEPROD\APP\ORACLE\ADMIN\XE\ADUMP
background_dump_dest = C:\ORACLE\XEPROD\APP\ORACLE\ADMIN\XE\BDUMP
user_dump_dest = C:\ORACLE\XEPROD\APP\ORACLE\ADMIN\XE\UDUMP
core_dump_dest = C:\ORACLE\XEPROD\APP\ORACLE\ADMIN\XE\CDUMP
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 94371840
MMAN started with pid=4, OS id=4092
PSP0 started with pid=3, OS id=4088
PMON started with pid=2, OS id=4084
DBW0 started with pid=5, OS id=2044
LGWR started with pid=6, OS id=1248
CKPT started with pid=7, OS id=200
SMON started with pid=8, OS id=2036
RECO started with pid=9, OS id=2012
CJQ0 started with pid=10, OS id=212
MMON started with pid=11, OS id=1924
Thu Mar 30 11:38:38 2006
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=12, OS id=380
Thu Mar 30 11:38:38 2006
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Thu Mar 30 11:38:42 2006
The input backup piece C:\ORACLE\XEPROD\APP\ORACLE\PRODUCT\10.2.0\SERVER\CONFIG\SEEDDB\EXPRESS.DFB is in compressed format.
Thu Mar 30 11:39:10 2006
Full restore complete of datafile 4 to datafile copy C:\ORACLE\XEPROD\ORADATA\XE\USERS.DBF. Elapsed time: 0:00:26
checkpoint is 193065
Full restore complete of datafile 2 to datafile copy C:\ORACLE\XEPROD\ORADATA\XE\UNDO.DBF. Elapsed time: 0:00:27
checkpoint is 193065
Thu Mar 30 11:39:27 2006
Full restore complete of datafile 3 to datafile copy C:\ORACLE\XEPROD\ORADATA\XE\SYSAUX.DBF. Elapsed time: 0:00:45
checkpoint is 193065
Thu Mar 30 11:39:27 2006
Errors in file c:\oracle\xeprod\app\oracle\admin\xe\udump\xe_ora_488.trc:
ORA-00600: internal error code, arguments: [krbrckhr_fail], [C:\ORACLE\XEPROD\APP\ORACLE\PRODUCT\10.2.0\SERVER\CONFIG\SEEDDB\EXPRESS.DFB], [83], [128], [3], [9427], [], []
Thu Mar 30 11:39:29 2006
Create controlfile reuse set database "XE"
MAXINSTANCES 8
MAXLOGHISTORY 1
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
Datafile
'C:\oracle\xeprod\oradata\XE\system.dbf',
'C:\oracle\xeprod\oradata\XE\undo.dbf',
'C:\oracle\xeprod\oradata\XE\sysaux.dbf',
'C:\oracle\xeprod\oradata\XE\users.dbf'
LOGFILE
GROUP 1 SIZE 51200K,
GROUP 2 SIZE 51200K,
RESETLOGS
Thu Mar 30 11:39:29 2006
WARNING: Default Temporary Tablespace not specified in CREATE DATABASE command
Default Temporary Tablespace will be necessary for a locally managed database in future release
Thu Mar 30 11:39:29 2006
Errors in file c:\oracle\xeprod\app\oracle\admin\xe\udump\xe_ora_744.trc:
ORA-01565: error in identifying file 'C:\oracle\xeprod\oradata\XE\system.dbf'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
ORA-1503 signalled during: Create controlfile reuse set database "XE"
MAXINSTANCES 8
MAXLOGHISTORY 1
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
Datafile
'C:\oracle\xeprod\oradata\XE\system.dbf',
'C:\oracle\xeprod\oradata\XE\undo.dbf',
'C:\oracle\xeprod\oradata\XE\sysaux.dbf',
'C:\oracle\xeprod\oradata\XE\users.dbf'
LOGFILE
GROUP 1 SIZE 51200K,
GROUP 2 SIZE 51200K,
RESETLOGS...
Shutting down instance: further logons disabled
Thu Mar 30 11:39:29 2006
Stopping background process CJQ0
Thu Mar 30 11:39:29 2006
Stopping background process MMNL
Thu Mar 30 11:39:29 2006
Stopping background process MMON
Thu Mar 30 11:39:30 2006
Shutting down instance (immediate)
License high water mark = 1
Thu Mar 30 11:39:30 2006
Stopping Job queue slave processes
Thu Mar 30 11:39:30 2006
Job queue slave processes stopped
Waiting for dispatcher 'D000' to shutdown
All dispatchers and shared servers shutdown
Thu Mar 30 11:39:32 2006
ALTER DATABASE CLOSE NORMAL
ORA-1507 signalled during: ALTER DATABASE CLOSE NORMAL...
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Thu Mar 30 11:39:34 2006
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 285212672
control_files = C:\ORACLE\XEPROD\ORADATA\XE\CONTROL.DBF
compatible = 10.2.0.1.0
db_recovery_file_dest = C:\oracle\xeprod\app\oracle\flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
audit_file_dest = C:\ORACLE\XEPROD\APP\ORACLE\ADMIN\XE\ADUMP
background_dump_dest = C:\ORACLE\XEPROD\APP\ORACLE\ADMIN\XE\BDUMP
user_dump_dest = C:\ORACLE\XEPROD\APP\ORACLE\ADMIN\XE\UDUMP
core_dump_dest = C:\ORACLE\XEPROD\APP\ORACLE\ADMIN\XE\CDUMP
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 94371840
PMON started with pid=2, OS id=756
PSP0 started with pid=3, OS id=796
MMAN started with pid=4, OS id=836
DBW0 started with pid=5, OS id=928
LGWR started with pid=6, OS id=152
CKPT started with pid=7, OS id=924
SMON started with pid=8, OS id=932
RECO started with pid=9, OS id=1212
MMON started with pid=10, OS id=1272
MMNL started with pid=11, OS id=1296
Thu Mar 30 11:39:35 2006
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Thu Mar 30 11:39:35 2006
Create controlfile reuse set database "XE"
MAXINSTANCES 8
MAXLOGHISTORY 1
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
Datafile
'C:\oracle\xeprod\oradata\XE\system.dbf',
'C:\oracle\xeprod\oradata\XE\undo.dbf',
'C:\oracle\xeprod\oradata\XE\sysaux.dbf',
'C:\oracle\xeprod\oradata\XE\users.dbf'
LOGFILE
GROUP 1 SIZE 51200K,
GROUP 2 SIZE 51200K,
RESETLOGS
Thu Mar 30 11:39:35 2006
WARNING: Default Temporary Tablespace not specified in CREATE DATABASE command
Default Temporary Tablespace will be necessary for a locally managed database in future release
Thu Mar 30 11:39:35 2006
Errors in file c:\oracle\xeprod\app\oracle\admin\xe\udump\xe_ora_1144.trc:
ORA-01565: error in identifying file 'C:\oracle\xeprod\oradata\XE\system.dbf'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
ORA-1503 signalled during: Create controlfile reuse set database "XE"
MAXINSTANCES 8
MAXLOGHISTORY 1
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
Datafile
'C:\oracle\xeprod\oradata\XE\system.dbf',
'C:\oracle\xeprod\oradata\XE\undo.dbf',
'C:\oracle\xeprod\oradata\XE\sysaux.dbf',
'C:\oracle\xeprod\oradata\XE\users.dbf'
LOGFILE
GROUP 1 SIZE 51200K,
GROUP 2 SIZE 51200K,
RESETLOGS...
Thu Mar 30 11:39:35 2006
Stopping background process MMNL
Thu Mar 30 11:39:36 2006
Stopping background process MMON
Starting background process MMON
Starting background process MMNL
MMON started with pid=10, OS id=580
MMNL started with pid=11, OS id=1288
Thu Mar 30 11:39:36 2006
ALTER SYSTEM enable restricted session;
Thu Mar 30 11:39:36 2006
alter database "XE" open resetlogs
ORA-1507 signalled during: alter database "XE" open resetlogs...
Thu Mar 30 11:39:36 2006
alter database drop logfile group 3
ORA-1507 signalled during: alter database drop logfile group 3...
Thu Mar 30 11:39:36 2006
ALTER TABLESPACE TEMP ADD TEMPFILE 'C:\oracle\xeprod\oradata\XE\temp.dbf' SIZE 20480K REUSE AUTOEXTEND ON NEXT 640K MAXSIZE UNLIMITED
ORA-1109 signalled during: ALTER TABLESPACE TEMP ADD TEMPFILE 'C:\oracle\xeprod\oradata\XE\temp.dbf' SIZE 20480K REUSE AUTOEXTEND ON NEXT 640K MAXSIZE UNLIMITED...
Thu Mar 30 11:39:36 2006
ALTER SYSTEM disable restricted session;
Shutting down instance: further logons disabled
Thu Mar 30 11:39:37 2006
Stopping background process MMNL
Thu Mar 30 11:39:38 2006
Stopping background process MMON
Thu Mar 30 11:39:38 2006
Shutting down instance (immediate)
License high water mark = 1
Waiting for dispatcher 'D000' to shutdown
Waiting for shared server 'S000' to die
Waiting for shared server 'S002' to die
Waiting for shared server 'S003' to die
All dispatchers and shared servers shutdown
Thu Mar 30 11:39:39 2006
ALTER DATABASE CLOSE NORMAL
ORA-1507 signalled during: ALTER DATABASE CLOSE NORMAL...
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Thu Mar 30 11:39:42 2006
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
spfile = C:\ORACLE\XEPROD\APP\ORACLE\PRODUCT\10.2.0\SERVER\DBS\SPFILEXE.ORA
sga_target = 285212672
control_files = C:\ORACLE\XEPROD\ORADATA\XE\CONTROL.DBF
compatible = 10.2.0.1.0
db_recovery_file_dest = C:\oracle\xeprod\app\oracle\flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
audit_file_dest = C:\ORACLE\XEPROD\APP\ORACLE\ADMIN\XE\ADUMP
background_dump_dest = C:\ORACLE\XEPROD\APP\ORACLE\ADMIN\XE\BDUMP
user_dump_dest = C:\ORACLE\XEPROD\APP\ORACLE\ADMIN\XE\UDUMP
core_dump_dest = C:\ORACLE\XEPROD\APP\ORACLE\ADMIN\XE\CDUMP
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 94371840
PMON started with pid=2, OS id=1480
PSP0 started with pid=3, OS id=1484
MMAN started with pid=4, OS id=1488
DBW0 started with pid=5, OS id=576
LGWR started with pid=6, OS id=1492
CKPT started with pid=7, OS id=1496
SMON started with pid=8, OS id=1260
RECO started with pid=9, OS id=376
CJQ0 started with pid=10, OS id=824
MMON started with pid=11, OS id=244
MMNL started with pid=12, OS id=1636
Thu Mar 30 11:39:42 2006
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Thu Mar 30 11:39:42 2006
ALTER DATABASE MOUNT
Thu Mar 30 11:39:42 2006
ORA-00202: control file: 'C:\ORACLE\XEPROD\ORADATA\XE\CONTROL.DBF'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Thu Mar 30 11:39:42 2006
ORA-205 signalled during: ALTER DATABASE MOUNT...
Thu Mar 30 11:41:54 2006
alter database mount
Thu Mar 30 11:41:54 2006
ORA-00202: control file: 'C:\ORACLE\XEPROD\ORADATA\XE\CONTROL.DBF'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
ORA-205 signalled during: alter database mount
Thanks,
Lucian

I think the relevant error from the log file is as follows
ORA-01565: error in identifying file 'C:\oracle\xeprod\oradata\XE\system.dbf'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
ORA-1503 signalled during: Create controlfile reuse set database "XE
There are a couple of things to consider here
Why is this install going into c:\oracle\xeprod ? If should be going into C:\oraclexe. Did you do something to change the default install infrastructure ?
Secondly - sometimes we see this unable to open file error message if some other process is reading the file at the same time as the installer is trying to install it. Anti virus software and Google desktop have been culprits to date.

Does the oracle golden gate version 11.1.1.1.2 support oracle 12C database ?

Hi experts,
Currently in our environment we are having Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bit DB which is replicated via oracle golden gate version 11.1.1.1.2. As per the application team requirement we need to migrate this database to 12C.
Can any one help me on the below queries
Does the oracle golden gate version 11.1.1.1.2 support oracle 12c database ?
Are there any syntax changes in oracle goldengate versions which needs to be taken care in extract or replicat parameter files ?
Thanks,
Mushraff Shaik

Hi,
>>Does the oracle golden gate version 11.1.1.1.2 support oracle 12c database ?
Why do you think it will not support 12c database ?
From a Golden Gate perspective you need to create schema and use that. As you are moving to 12c database, ideally you should think of upgrading Golden Gate 11.1 to 12c so you can use new feature such as Multi Threaded replicate etc..
HTH,
Pradeep

Staging area needs Oracle universal Installer version 10.2.0.0.0 or later

Hi,
I am trying to install OEM agents thru run installer. but it says "staging area needs Oracle universal Installer version 10.2.0.0.0 or later", we are on we are on 10.1.0.5.0. How to download 10.2.0.0.0 or later.
Regards

# From Metalink click on "Patches & Updates” tab
# Select "Advanced Search”
# Enter "Universal Installer” under Product or Product Family
# Select "Oracle 10.2.0.0.0” release (Or higher)
# Select your Platform
# Change "Patch Type” to Any
# Change Classification to Any
# Click on Go

Where I can get the oracle 11i trial version

Hi,
I have seen the oracle 11i trial version.
So anybody know where I can download the trial version ?
Thanks

You can order a copy from technet.oracle.com - go to istore and then select OS and 11.5.9

Error -During the Intallation of Oracle Retail Merchandising System

During the installation of Oracle Retail Merchandising System(RMS), getting the following error,
BUILD FAILED
/home/oretail/stgbatch/rms/batch/build.xml:408: ERROR: Batch library compilation failed. View /home/oretail/rmsbatch/log/libcomp.log for more information.
Total time: 1 minute 37 seconds
org.tp23.antinstaller.InstallException: Error running the install, Ant run failed - examine the error logs for details
at org.tp23.antinstaller.runtime.exe.AntLauncherFilter.exec(AntLauncherFilter.java:88)
at org.tp23.antinstaller.runtime.ExecInstall.exec(ExecInstall.java:85)
at org.tp23.antinstaller.runtime.ExecInstall.main(ExecInstall.java:157)
Caused by: org.tp23.antinstaller.InstallException: Ant run failed - examine the error logs for details
at org.tp23.antinstaller.runtime.exe.AntLauncherFilter.exec(AntLauncherFilter.java:78)
... 2 more
--- Nested Exception ---
org.tp23.antinstaller.InstallException: Ant run failed - examine the error logs for details
at org.tp23.antinstaller.runtime.exe.AntLauncherFilter.exec(AntLauncherFilter.java:78)
at org.tp23.antinstaller.runtime.ExecInstall.exec(ExecInstall.java:85)
at org.tp23.antinstaller.runtime.ExecInstall.main(ExecInstall.java:157)
Install failed
Error running the install, Ant run failed - examine the error logs for details
Failed
Need help in resolving this!

Hi Elmar,
I have checked the packages and the XFree86-libs-4.3.99 is not installed. I guess I will have to install it.
Now your question about oracle user. I am not sure if you have performed any SAP MDM installation with ORACLE RDBMS but the installation guide is totally different than the normal SAP inst guides. Indeed someone needs to install separately SAP MDM and ORACLE and in my installation I do not install NetWeaver since it is not mandatory for the testing phase of the project. You can have a look at the guide (it is very poor -no reference to ORACLE details):
https://websmp105.sap-ag.de/~sapidb/011000358700000271882007E
So the official ORACLE inst gudie says to install the ORACLE software with the oracle user.
Rgds,
Louka

Oracle Retail J2EE version

Similar Messages

Maybe you are looking for