OracleDataReader.Read() throws Exception! How can I skip a row?

Hello,
I am trying to do a simple dump of a huge table (~25 million rows) from
an Oracle database using Oracle Data Provider.Net.
I am calling ExecuteReader() on the Command object and then
OracleDataReader.Read() in a loop.
Some where halfway through, an exception is thrown because of corrupt data
(ORA-29275: partial multibyte character)
Oracle.DataAccess.dll version:: *2.111.6.20*
I want to know if it is possible to skip this particular row and continue
with the rest of rows.
When using a try/catch block and trying to read again in the catch block, naturally the
cursor is not valid (i get a "ORA-01002: fetch out of sequence" error).
Is there some sort of "peek" or "skip" in OracleDataReader so that I can
ignore the problematic row(s)?
And there's nothing I can do to fix the actual data :-(
I have only read permission on the target DB. So I cannot change anything.
Thanks in advance!
-Regards,
Venkat.

Try, yourField.access="protected" instead of "readOnly"
Kyle

Similar Messages

I try to authorize my computer and when i login i was told to review my account but i also dont have a visa or a credit card so how can i skip it ?

i try to authorize my computer and when i login i was told to review my account but i also dont have a vice or a credit card so how can i skip it ?

Not it. Thanks. I tried it, so thanks for the tip, but I get the same error message. That I need to authorize this computer to get the purchases. I guess it's not really an error message. But It will not let me proceed any further. Once again I have deauthorized and this is the only computer that is authorized for this account.
Then
Then and last
Pretty annoying. Any ideas?

HT2534 im 14 and i dont have no credit card how can i skip that step?

im 14 and i dont have no credit card how can i skip that step?

None Payment
Did you create a NEW account using the instructions in Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card using an email address you had not previously used with Apple?
You have to.
You may have to create a new account following the instructions using a new email address.

How can I skip message, and just leave a message?

How can I skip message, and just leave a message? I don't want to have to listen to the whole message....

Press * while the message is playing.

Formatting issues: when I open a msg, the font is sooo small you need a magnifier to read it. How can I set the font size to one I can easily read?

== Issue
==
I have another kind of problem with Firefox
== Description
==
I have various formatting issues:
a. When I open a msg from my web browser (Cablevision), the font is sooo small I need a magnifier to read it. How can I set the font to a size I can easily read?
b. When I forward msgs, the text gets all distorted and I need to clean it up (some symbols, lots of spaces between words). How can this be fixed?
c. When I want to tell someone about a website, I cannot type the URL in so that all they have to do is click on it. How can this be fixed?
d. When I open messages, the text opens in a small window and covers the "Show Images" button. Why?
== This happened
==
Every time Firefox opened
== Ever since I started using Firefox (a few months ago)
==
'''Troubleshooting information'''
I didn't find any results
== Firefox version
==
3.6.3
== Operating system
==
Windows 7
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3
== Plugins installed
==
*-nphpclipbook
*Office Plugin for Netscape Navigator
*The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
*Default Plug-in
*Adobe PDF Plug-In For Firefox and Netscape "9.3.2"
*NPRuntime Script Plug-in Library for Java(TM) Deploy
*The Hulu Desktop Plugin allows Hulu.com to integrate with the Hulu Desktop application.
*Shockwave Flash 10.0 r45
*Adobe Shockwave for Director Netscape plug-in, version 11.5
*iTunes Detector Plug-in
*3.0.40624.0
*NPWLPG
*Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers

The text editor is the text area that you use on the webmail (Yahoo, Hotmail) website to create a new mail.
You can compare that with the ''Post new message'' text area that you use to create a new post on this forum.
Just above the text area that you use to enter the message text there is usually a button bar with buttons that allows some text formatting like Bold and Italic and can also include a button to make a clickable hyperlink.
Check the tooltip of each button by hovering with the mouse over each button.
Make Link - https://addons.mozilla.org/firefox/addon/142

I am connecting an external USB HDD and I can see it on my Apple Macbook Air. BUT this drive is READ only. How can I write to it?

I am connecting an external USB HDD and I can see it on my Apple Macbook Air. BUT this drive is READ only. How can I write to it?

Drive Partition and Format
1.Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.

I adobe acrobat 7.0 professional. When I open or save a PDF it reverts to Adobe Reader XI. How can I change that to the pro as it has far more editing options.

I adobe acrobat 7.0 professional. When I open or save a PDF it reverts to Adobe Reader XI. How can I change that to the pro as it has far more editing options.

You may want to keep Reader. You may want to select Acrobat as your default, but be able to click on a PDF (or PDF link) to open in Reader when needed. There are likely some PDFs that will not open correctly in AA 7 because of new features folks add. Just because it opens in Reader XI does not mean it is in the new format, but just that is the default opening you have. To tell the type of file, you have to open the PDF and check the properties (ctrl-D) and check Description>PDF version.

My iTunes is not showing my iPhone but my computer is reading it. How can I get iTunes to realize my phone is there to sync music onto it?

My iTunes is not showing my iPhone but my computer is reading it. How can I get iTunes to realize my phone is there to sync music onto it?

Device not detected in iTunes for Windows

I NEED MULTIPLE SYSTEM LICENSE FOR ACROBAT READER PRO. HOW CAN I BUY. HOW MUCH FOR THAT

I NEED A MULTIPLE PC LICENSE FOR ACROBAT READER PRO. HOW CAN BUY. HOW MUCH FOR THAT.

Reader is free. If you want multiple licenses for Acrobat, you have to discuss this with Acrobat. The Adobe Store gives pricing for up to 9 licenses. Volume license require talking to Adobe, not other users.

Iphoto 8.1.2 My source list has disappeared or is so diminished that I can not read it. How can I make it the normal size, please? l

iphoto 8.1.2 My source list has disappeared or is so diminished that I cannot read it. How can I make it a normal size, please?

Move your cursor to the extreme left of the iPhoto Window until it becomes a '+', then click and drag right.
Regards
TD

I have loaded and reloaded Reader 9. I cannot open a pfd document.      I can save it to desk top then open it via a drop down box that has a "open with Adobe Reader 9". How can I avoid having to do this?

I have loaded and reloaded Reader 9. I cannot open a pfd document.      I can save it to desk top then open it via a drop down box that has a "open with Adobe Reader 9". How can I avoid having to do this?

Hello Michael,
Thank you for your response. My operating system is XP. When I try to open a pfd document I just get a series of letters and symbols in a dialog box. The top of the box says "select the encoding that makes your document readable". I can choose Windows, MS-Dos, or other (there is a long list to choose from). None seem to make a difference. If I save the document to my desk top I can right click on it and choose an option "Open with AdobeReader 9" and it opens fine.
Thank you,
Rick
New Edge Technologies
6525 Peninsula Dr.
Traverse City, MI 49686
231.620.2521
231.941.1284 (fax)
[email protected]
Date: Wed, 8 Jul 2009 06:22:51 -0600
From: [email protected]
To: [email protected]
Subject: I have loaded and reloaded Reader 9. I cannot open a pfd document.      I can save it to desk top then open it via a drop down box that has a "open with Adobe Reader 9". How can I avoid having to do this?
Hello:
What operating system does your computer use? What happens when you attempt to open a PDF document rather than saving it first? Please include any/all error messages. Also, have you tried opening documents from other locations or just one in particular?
Thanks,
     Michael
>

HT2589 how can i skip the viewing on my account when i has not use my apple id in i tunes stores?

How can i skip the viewing on my account when i has not use my apple id? The main problem is i do not have a credit card... so what should i do?

You can't, you will need to enter a credit card number before you can use that account in the store.
There are instructions on this page for how to create a new account without giving credit card details : http://support.apple.com/kb/HT2534

How can I use multiple row insert or update into DB in JSP?

Hi all,
pls help for my question.
"How can I use multiple rows insert or update into DB in JSP?"
I mean I will insert or update the multiple records like grid component. All the data I enter will go into the DB.
With thanks,

That isn't true. Different SQL databases have
different capabilities and use different syntax, That's true - every database has its own quirks and extensions. No disagreement there. But they all follow ANSI SQL for CRUD operations. Since the OP said they wanted to do INSERTs and UPDATEs in batches, I assumed that ANSI SQL was sufficient.
I'd argue that it's best to use ANSI SQL as much as possible, especially if you want your JDBC code to be portable between databases.
and there are also a lot of different ways of talking to
SQL databases that are possible in JSP, from using
plain old java.sql.* in scriptlets to using the
jstlsql taglib. I've done maintenance on both, and
they are as different as night and day.Right, because you don't maintain JSP and Java classes the same way. No news there. Both java.sql and JSTL sql taglib are both based on SQL and JDBC. Same difference, except that one uses tags and the other doesn't. Both are Java JDBC code in the end.
Well, sure. As long as you only want to update rows
with the same value in column 2. I had the impression
he wanted to update a whole table. If he only meant
update all rows with the same value in a given column
with the same value, that's trivial. All updates do
that. But as far as I know there's know way to update
more than one row where the values are different.I used this as an example to demonstrate that it's possible to UPDATE more than one row at a time. If I have 1,000 rows, and each one is a separate UPDATE statement that's unique from all the others, I guess I'd have to write 1,000 UPDATE statements. It's possible to have them all either succeed or fail as a single unit of work. I'm pointing out transaction, because they weren't coming up in the discussion.
Unless you're using MySQL, for instance. I only have
experience with MySQL and M$ SQL Server, so I don't
know what PostgreSQL, Oracle, Sybase, DB2 and all the
rest are capable of, but I know for sure that MySQL
can insert multiple rows while SQL Server can't (or at
least I've never seen the syntax for doing it if it
does).Right, but this syntax seems to be specific to MySQL The moment you use it, you're locked into MySQL. There are other ways to accomplish the same thing with ANSI SQL.
Don't assume that all SQL databases are the same.
They're not, and it can really screw you up badly if
you assume you can deploy a project you've developed
with one database in an environment where you have to
use a different one. Even different versions of the
same database can have huge differences. I recommend
you get a copy of the O'Reilly book, SQL in a
Nutshell. It covers the most common DBMSes and does a
good job of pointing out the differences.Yes, I understand that.
It's funny that you're telling me not to assume that all SQL databases are the same. You're the one who's proposing that the OP use a MySQL-specific extension.
I haven't looked at the MySQL docs to find out how the syntax you're suggesting works. What if one value set INSERT succeeds and the next one fails? Does MySQL roll back the successful INSERT? Is the unit of work under the JDBC driver's control with autoCommit?
The OP is free to follow your suggestion. I'm pointing out that there are transactions for units of work and ANSI SQL ways to accomplish the same thing.

How can i find Duplicate Rows in forms6i

Hi,
How can i find duplicate rows in multiple record in forms6i.
Thanks
Raghu.K

Oops, sorry for misreading your question. (However the SQL I gave you above is also very handy, and worth saving.)
Okay, this is off the top of my head and untested, but might just work. Assuming that your data block name is MYBLOCK, and that the item that you want to check for dups on is named MYNUM, create an item-level WHEN-VALIDATE-ITEM trigger with the following code.
declare
l_newest_record number(10) := :system.cursor_record;
l_newest_mynum number(10) := :myblock.mynum;
l_dup_found boolean := false;
begin
-- In this loop, we skip backwards through all new records to look for dups.
while :system.cursor_record > 1 loop
previous_record;
if :system.record_status = 'NEW' then
if :myblock.mynum := l_newest_mynum then
l_dup_found := true;
exit; -- Dup found!
end if;
else
exit; -- We've gone backwards past the first new record.
end if;
end loop;
-- In this loop, we return to the current record.
while :system.cursor_record < l_newest_record loop
next_record;
end loop;
if l_dup_found then
raise duplicate_row_found; -- user-defined exception
end if;
end;
The above code only checks for dups in the new form records. It assumes that a unique constraint in the database will deal with records actually committed.
Armand

How can I add a row into a JTable with JButton

Hi all. I have the following code:
package gui;
import db.*;
import javax.swing.table.AbstractTableModel;
import java.util.ArrayList;
public class FoundersTable extends AbstractTableModel{
    private static final int COLUMNS = 8;
    private String columnNames[] = {"�� ", "��", "��", "��", "��", "��",
            "�� ", "�� , ��"};
    private ArrayList data;
    public FoundersTable(){
        data = new ArrayList();
    public int getRowCount() {
        return data.size();
    public int getColumnCount() {
        return columnNames.length;
    public String getColumnName(int colIndex) {
        return columnNames[colIndex];
    public Object getValueAt(int rowIndex, int columnIndex) {
        return ((ArrayList)data.get(rowIndex)).get(columnIndex);
    public void setValueAt(Object value, int rowIndex, int columnIndex) {
        ((ArrayList)data.get(rowIndex)).set(columnIndex, value);
        fireTableCellUpdated(rowIndex, columnIndex);
    public void addRow(ArrayList neueZeile) {
        data.add(neueZeile);
        int index = data.size() - 1;
        fireTableRowsInserted(index, index);
    public void removeRow(int index) {
        data.remove(index);
        fireTableRowsDeleted(index, index);
    public void removeAllRows() {
        data.clear();
        fireTableRowsDeleted(0, 0);
    public boolean isCellEditable(int rowIndex, int columnIndex) {
        return true;
}Now in my MainJFrame class I have one button for additing and one button for removing a selected row. How can I add/remove rows with this two buttons.
Thanks

No my question is how can I add and remove rows WITH buttons My point was the code is the same. You use the addRow(...) method. Why did you write an addRow(...) method if you aren't going to use it?
I don't understand your problem. Do you not know how to write an ActionListener?

OracleDataReader.Read() throws Exception! How can I skip a row?

Similar Messages

Maybe you are looking for