Original iPad, all music has stopped playing, no "Music", pandora or iheart radio. How do I hear the music once again?
Help! Original iPad, all music has stopped playing, no preloaded "music" app, pandora or iheart radio. How do I hear the music once again?
Never Mind - found help on another thread. Rebooted the ipad, and all items now will play.
Similar Messages
-
Help needed foa a zen vision 30 GB( how can I hear the music in a amplifi
Hi,I would like to connect my zen to an amplifier or a music case as to hear the music in a large hall. I am wondering if there are cables available to make this connection?Thanks in advance/Fabio
If your sound system has what is called a "music port" or an auxiliary audio plug, you can get a two-end 3,5mm cable that you plug in the port and in your device's earphone jack. Then you select on your sound system auxiliary audio or music port, and press play from your device. That's how my sound system works. If you have a relati'vely new sound system, you probably have that music port. If not, check the user's manual of your sound system to see how you can play music from auxiliary sources.Your best bet would be to go to an electronic boutique and ask an expert. I went to future shop and simply asked for what sort of cable I was looking for, and the guy found it for me.Hope this helped,Good luck
-
i have a PC and i had itunes on it with lots of songs. A technician fixed my computer and deleted my itunes on the way. Iv'e reinstalled an itunes programm, how can i transfer the songs from my ipod touch onto the itunes? I'm afraid that if i'll sync the two, the songs from my ipod touch will be deleted since the itunes on my computer is empty
Transfer iTunes purchases by:
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
- Transfer othre music by using a third-party program like one of those discussed here:
Copy music
- Retain app data and other information, connect the iPod to yur computer and make a backup by right clciking on the iPod under Devices in iTunes and select Back Up
- Restore the iPod from that backup
Note that the Backup that iTunes makes does not include synced media like apps and music. -
I'm using a XM skydock system and trying to figure out why I cant hear my phone calls through ny radio. I can hear it ring, i can also hear my music play...
What is selected under the Photos tab for your iPhone sync preferences with iTunes?
If the videos are in an iPhone compatible format and are in a folder of photos selected to be transferred to your iPhone under the Photos tab for your iPhone sync preferences with iTunes, do you also have Include Videos selected under the Photos tab?
Or if the videos are in an iPhone compatible format, they need to be in your iTunes library and can be selected under the Movies tab for your iPhone sync preferences with iTunes to be transferred to your iPhone. -
i am in ny and i get my favorite radio station in fl on my ipod touch, but when i plug it into my aux on my radio so that i can hear it, theres no sound at all
Do headphones work in your iPod touch? If they do that indicates there is a problem with the cable or the car's AUX input.
-
help my computer crashed and i want my music back from my phone
One choice is to use the computer backup of the old laptop and sync it to the new laptop. The other is to find some program on the web that reads data from the phone and copies to the computer. Try googling to find something.
-
IPod touch has stopped playing through docking station, please help
Please help, my ipod touch has stopped playing through my docking station, what should I do?
Undock the Touch, get a flashlight and inspect the docking connector. Clear any dust/debris you find. Do the same on your docking station.
-
How do I load the music to my Nano?
I have downloaded music from a CD to Itunes on my computer. How do I load the music to my Nano? I have tried, but all I get is static or load roar when I try to play it back on Nano. What am I doing wrong?
Does this music play okay in iTunes? If so, have you tried restoring your Nano to factory settings in iTunes and then reloading this music back over to it?
Have you also tried a different set of head phones to rule out that possibility as well? If might be hardware issue and in that case, I would schedule an appointment at your local Apple Store/Genius Bar and have them take a look at it for you.
B-rock -
How do I take the music from my iphone and put it on Itunes - PC
My daughter erased all my music off my itunes on my pc by mistake.
How do I transfer the music from my phone to my itunes....If you were using a Mac you could use a program but AFAIK there is nothing similar yet for the PC.
However, you should have a backup of your music, correct? Just restore from that backup to your computer (and, if not, at least this will teach you the importance of always backing up your music purchases onto writable media like DVD). -
The volume on my iPad 3 has gone. I've checked the mute button, tried restarting, resetting etc and nothing has changed. I can't hear the music, hear any sound from videos. Most times the video stops playing after a seconds. My iPad 3 is only 2 months ol.
If you have lost all sound and video is freezing on you, that ain't good. Your iPad is two months old so I would not hesitate to contact Apple at all. You are entitled to 90 days of phone support.
http://www.apple.com/support/ipad/contact/.
If you want to try a couple of things on your own, try quitting all apps and then reboot the iPad - not so much for the sound issue itself - but more as a general "start all over again" sort of approach. It might help with the video freezes.
Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Reboot the iPad.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
If you use headphones on occasion, you can try plugging and unplugging those as well and see if the sound comes back.
You could even try restoring the iPad to factory settings and then restore from a backup, but unless there is something totally hosed on the iPad, that should not be necessary with a two month old device - of course assuming that you didn't drop the iPad or do something accidental that could be causing the problems. -
My itunes has stopped playing music. I recently downloaded more music and now it has stopped playing, it says it is playing but there is no sound and the time bar does not move from 0. I have uninstalled all apple apps on my laptop and reinstalled and then updated the software. I have tried 'repair' aswell but nothing has worked.
Songs in the itunes store are also not working
-
My ipod has stopped playing music and my audio books? is this a fault or can it be restored?
My ipod touch has stopped playing both music and audio books, is this a fault or is there something that can be done?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all media and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
My iPhone 5s has stopped playing music out of the speakers. It works when I plug in my headphones but other than that there's no sound. It just randomly happened so I'm not sure if I can fix it or if I need to bring my phone in. Help?
Hi Cassilecompte,
If you are not getting any sound from your iPhone’s speaker, you may want to troubleshoot using the steps in this article -
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Thanks for using Apple Support Communities.
Best,
Brett L -
For some reason my QuickTime player has stopped playing all my .avi movies, I can't seem to upgrade and it doesn't offer any solutions except that it may need additional software but not what or where to obtain it from? Help most of my movie are in .avi!!
Google 'Perian' and 'Flip4Mac' — these are the extensions that will make QT play other file formats.
However, a simpler solution is just to abandon QT in favour of the free, open-source player VLC, which plays just about everything natively without further downloads.
Download the free VLC Player from here:
http://www.videolan.org
Plays just about everything, including avi & mpg, without add ons. -
TS1717 my music videos stop playing after 3 minutes
my music videos stop playing after 3 mins it happens to them all they worked fine before I upgraded to the new software
No there is no particular limit, especially one as short as 4 minutes in the Flash player or a Web page in general.
The video file may have been corrupted before or during upload to server.
Test the original video file on your local machine, does it play the entire length? is so, notice the file size.
Compare that size to the file size of the video on the server... if they are the same, you might want to re-upload anyway.
Your video file will also have a web address that specifies exactly where it is located on your server. Do a direct download and test the file to see if it is courrupt.
It will have an address something like this:
http://www.cidigitalmedia.com/chris_test/tombstone/video1.flv
So download your file directly from the server and play on your local machine to see if it's longer than 4 min.
Could it be that your Web host only allows certain size files (no videos over 4 min for example)?
Best wishes,
Adninjastrator
Maybe you are looking for
-
Dynamically creating components on the page gives problems
Hello, we are creating a number of custom UI components dynamically on the page, depending on informations we only know at runtime (for some reasons, we could not just create them statically and hide and show them dynamically- please don't suggest do
-
How to capture error message log for Tcode MIR7
Hi , I have a problem to capture the error message outside the tcode which are created by MIR7/MIR0 . Are they stored in any database table? Is there any other way to access them? Anybody knows how to solve this that will be very helpful. Thanks, Anu
-
Clicking at the end of a burnt CD
When I've been burning CDs recently, I've been hearing a sort of clicking sound toward the end of any album that I burn. A friend of mine listened to the problem and described as potentially a "buffer underrun" problem. Has anyone else had this probl
-
User input prompt in CASE statement
I would like to obtain user input via a prompt and use what the user selects in my OBIEE Report case statement. For example &START_DATE AND &END_DATE are user inputs: CASE when SHIP_DATE BETWEEN &START_DATE AND &END_DATE THEN 1 Thanks
-
How to make a high resolution screen capture?
Hye, I'm trying to make high resolution screen captures in Maverics. On earlier systems, one could use Quartz Debug which had a slider that could alter resolution of the capture app. Now on Mavericks this option is gone, it only allows Retina-like sc