OS X Yosemite 10.10.1 slow internet via wifi

I'm posting this in the hopes that Apple will fix soon. I have a 27inch iMac late 2012. All was fine with Mavericks. After upgrading to Yosemite my internet is slow via my wifi. Yosemite 10.10.1 did not improve anything. iPad and iPhone 6 maintain normal internet speeds with same wifi. I've tried various solutions that have been posted by others and recommended by Apple support. No improvement. When accessing a page on internet, Safari browser blue line in address field goes about 1/4 of the way across and then pauses...sometimes up to 10 seconds...before continuing and rendering the page. I do not lose wifi connection, as some people report, it's just much slower than it was with Mavericks. Apple, please fix ASAP!!

I have a new MacPro which was purchased with Mavericks and all ran very well. Shortly after "upgrade" to Yosemite my attempts to connect to the internet are as you described but with an ethernet connection. This is not just Safari but also Mail too.
All my other devices ( iPhone 4; iPad 2; old MacPro 1.1 and old macbook ,both with 10.7.5,) will connect to the internet as they should whilst the New MacPro just hangs. However my Macbook Pro which was also purchased with Mavericks and subsequently "upgraded" to Yosemite connects to the internet with no real problems via wifi. Both the New MacPro and Macbook Pro are running through the same network arrangement as are all the other devices mentioned.
I find that when the New MacPro is hanging that if I use my iPhone or iPad to connect to mail for example it seems to kick start the New MacPro and it soon after makes connection.
MacPro (late 2013) OSX10.10.1

Similar Messages

  • Slow internet via wifi

    i'm posting again about the slow airport where the webpages start to load and pause for 10 seconds then continue to load VERY slowly.
    i called apple, they said it's my card or the router. i brought it to the store and it worked fine, so i'm assuming it's my router.. but what is wrong with my router?
    it works well with everyother computer in the house, even a powerbook.
    why is it JUST my MBP that has insanely slow internet via wifi?
    i have a netgear wgr614v3..
    should i buy a new router just because my MBP doesn't work good with it?
    thanks!

    That is what I ended up doing. Though in my case it was not just my computer but my wifes Toshiba as well. They both have the Atheros based cards. I have seen reports regarding issues with the Atheros cards and certain D-Link, Linksys and Netgear routers though the one I had as a Belkin Pre-N.
    The issue I had was in using the WPA security. It worked fine with WEP but had the symptoms you describe with WPA.
    I recent replaced it with a Netgear RangeMax WPN824 v2 and they both appear to be working fine so far. My Dell notebook which is not Atheros based had no problems with either router.

  • Extremely slow internet via wifi

    Hi there!
    I bought some days ago a MacBook Air (the low end model, 1,6GHz) in the USA. Now, in Italy, I can connect it to my wifi, ADSL belkin modem+ wireless router 802.11.g, but the speed is prohibitively slow! Indeed, I measured it with a simple speedtest (Internetfrog) and it consistently gives me 16 kbps . At the same time, my other computer (Windows PC), measured with the same tool, has a speed of 1,14Mbps, as it used to have...
    There must be something wrong with the Mac or the connection!
    Since I am new in the family, can somebody out there help me get a smooth landing in the Mac world?
    Many thanks in advance
    AK

    I have had the same problem with my wireless lan connection of my brand new macbook.
    The connection was terrrible slow.
    For me it works, so perhaps this will work for you, too???
    disconnect from your network by turning off AirPort or unplugging your ethernet cable.
    trash the following folder (from the global /Library, not your own ~/Library in your home directory): /Library/Preferences/SystemConfiguration
    if required: enter your admin password
    restart your pc
    turn on your Airport card and enter your network settings
    I've found the solution in discussion for macbooks, so here is the original post:
    http://discussions.apple.com/thread.jspa?threadID=1431668&tstart=0
    So let me know, if it works for you....

  • Imac will not connect to Internet via wifi or Ethernet since upgrade.

    since the upgrade to Yosemite I am unable to connect to the Internet via wifi or Ethernet. All my other devices ipad/IPhone 6 work fine so issue is not with ISP.
    Any help would be greatly appreciated.

    I Have tried starting in safe mode and my internet works fine. But I lose all connectivity after reboot into normal mode.

  • My macbook pro cannot connect to internet via wifi

    I have a Macbook Pro 2010 OS X 10.8.3.  I cannot connect to internet via wifi (Air por).  My Macbook Pro does not recognize my network and when I select it from the list of network it asks for my network password.  when I type in my password a dialog box gives me timeout error.  Please could anyone help me.  I am using ethernet for my connection at the moment.  Do I need to reset my macbookpro?  if yes, what will happen to my applications and operating system (mountain lion)?
    Monireh

    When you use the Airport utility what happens?
    What is in the System Preferences control panel for Network settings?
    http://www.apple.com/support/airport - there is a forum just for Airport Community
    Airport Express FAQ
    http://support.apple.com/kb/HT1515
    Wi-Fi Setup Considerations
    Things to consider before you begin
    Start with a plan for the physical layout. Depending on whether you have an existing Wi-Fi network, or if you are using your AirPort Express as a standalone Wi-Fi device, there are several options available for you to choose from.
    When using Ethernet, Cat6 cable is recommended.
    The layout you choose should take into account environmental factors such as physical access, location, range, radio frequency interference, etc.
    You will need to consider what AirPort Utility settings to adopt.
    You will need to know whether you are using an AirPort Express (802.11b/g) or an AirPort Express (802.11a/b/g/n).
    If you will be using more than one Wi-Fi base station, it may be helpful to read the article Extending the range of your wireless network by adding additional Wi-Fi base stations.
    AirPort Discussions
    Discuss your AirPort Base Station, Time Capsule and Wi-Fi questions with fellow community members.
    More
    Direct you to the proper forum for MacBook :
    MacBook Series Forumshttps://discussions.apple.com/community/notebooks?view=discussions
    Mac OS X Forums
    https://discussions.apple.com/community/mac_os?view=discussions 
    http://www.apple.com/support/macbookpro

  • My MacBook Pro won't connect to the Internet via wifi but it worked fine on ethernet cord...I tried running diagnostic but it didn't work:((((  it happen every time if I restart the modem and/or router

    My MacBook Pro won't connect to the Internet via wifi but it worked fine on ethernet cord...I tried running diagnostic but it didn't work:((((  it happen every time if I restart the modem and/or router.. Any idea how to fix this?

    Hello Rattisate,
    Sorry to hear you are not able to connect to Wi-Fi on your MacBook Pro.  I would be concerned about this too.  You can find information on how to troubleshoot this in the following article:
    Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
    http://support.apple.com/kb/HT4628
    Follow the steps in the section labeled, "Symptom: My Mac does not connect to the Internet."
    Thank you for posting in the Apple Support Communities.
    Best,
    Sheila M.

  • I am unable to connect my ipad to the internet via wifi, when asked for my password I get message "unable toI ge join network" however my laptop is able to access the internet using similar procedures and in the same physical location.?

    I am unable to connect my IPad to the internet via WiFi, when asked for a password then attempt to join I get the messag "unable to join the network" however  if I use my laptop in  the same physical locationand using similar procedures I am able to conect.?

    What router are you using? make/model/version
    What security type are you using? If it is WEP then symbolic (non hex) keys may be converted to hex in different ways by different operating systems. Is your laptop a Windows PC?
    If you are using WEP then drop it and move to WPA2. WEP has been deprecated by the WiFi alliance since 2004 as insecure (it can be hacked in seconds).

  • Unable to connect to internet via wifi

    I have had this problem ever since I received my preordered Dinc.  I can successfully connect to the internet via wifi anywhere but at my place of employment (very frustrating).  The Dinc sees and connects to the wifi but when I open the browser the following pop up window appears:
    “Security warning
    There are problems with the security certificate for this site.
    This certificate is not from a trusted authority”
    I then have a choice to continue, view certificate, or cancel.  When I view the certificate it states the organization, The Go Daddy Group Inc, unit, Go Daddy Class 2 Certification Authority and validity:
    VZ tech support stated that they never heard of it and recommended that I call HTC. 
    HTC said that this is a common problem and that Go Daddy uses a variable wild card for their SSL.  The conversation ended when they said that there is nothing that can be done.
    I finally contacted Go Daddy who said that they need the account number without that there is nothing that they can do.
    Laptops, Iphones, and other cell phones can get on the internet.
    My questions to this board are:
    Has anyone else had this issue?
    Does anyone know of a fix?
    Who is responsible for the fix VZ or HTC?
    Do you think that when (ever) the OTA update to Froyo will fix this?
    Thanks to all

    I'd talk to your IT dept at work.

  • Problems accessing the internet via wifi

    I'm not able to access internet via wifi but am connected to my wifi network.
    No problems when using 3G
    I guess it is a dns problem?
    when i check the wifi settings IP address and subnet mask
    have details but is blank for router, dns and search domains.
    What details should I input there?
    Would it mess anything up if I used the same settings that my iphone uses?
    I know wifi is ok because I can download books to my ipad with stanza using wifi.
    Sorry don't know too much about this sort of thing
    dianne

    diannef wrote:
    yes IP address begins with 169
    HTTP proxy is set to off
    I am using a Time Capsule.
    Have a macbook pro
    and two iphones connected with no problems
    Is their a limit to no. of devices that can connect?
    Yes, this would be determined by the size of the IP pool allocated on your time capsule router. Ordinarily this should be large enough by default to accommodate the number of devices you have.
    Not sure where to check
    "If DHCP is not working for you then you should check to see if your router is set to do DHCP and that MAC address filtering is not turned on"
    *First, please note that if you aren't really familiar with network setup you should probably give Apple support a call and they can walk you through this.* See: http://www.apple.com/support/expert/
    You can access your Time Capsule router using the Airport Utility which is found in the Applications/Utilities folder on your Macbook Pro. If you use this utility you can see how your router is setup. Post what you see here, i.e., Network name, radio mode, channel, Security password protection (WPA2 personal is best), etc. Of course, don't post any passwords.
    Don't forget to check that the IP Address selector in your iPad WiFi setting for your network (which can be DHCP, BootP or Static) is set to DHCP.
    I will turn Time capsule off for a while to try.
    At this point it might also be a good idea to also go to Settings > General > Reset on your iPad and select "Reset Network Settings".

  • I have a problem in connecting to internet via WiFi.

    I have a problem in connecting to internet via WiFi. This week I received my new "iPhone 6 and 6 plus". Problem is the new phones doesn't connect to internet via my home WiFi  while I don't have any problem on my other devices. The phones connect to WiFi but most of Apps can't connect to internet.

    Hi vpouya,
    If you are having an issue with connecting to the Internet from your iPhones via Wi-Fi, I would suggest that you troubleshoot using the steps in this article - 
    iOS: Troubleshooting Wi-Fi networks and connections - Apple Support
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • I keep getting error message " server stopped responding" when trying to connect to internet via wifi

    My iphone works fine using cellar network, but will not connect to internet via wifi. Ive reset network setting with no diffrence.
    Any ideas?

    And you can turn the WiFi button on and off?
    If yes, then you next need to try to Restore your iPhone from your backup.

  • I am trying to set up internet sharing from my macbook air but there does not seem to be an option for this because the air is connected to the internet via wifi connection. Is it possible to still share this?

    I am trying to set up internet sharing from my macbook air but there does not seem to be an option for this because the air is connected to the internet via wifi connection. Is it possible to still share this?

    It depends upon how the other machines are connecting to your MBA:
    If the the other machines are also using wi-fi, they can connect directly to the wireless access point (router) without going through your MBA
    If the other machines are connecting to the MBA using ethernet you can share your wi-fi connection to them

  • I have a first gen IPad 1..have been very happy until two weeks ago...everytime I try to access the internet via WIFI...it blows me off.  I have tried 5-6 different WIFI spots...to be sure it was not mine at home...does the same thing everywhere...

    Recently I have lost the ability to access the internet via WIFI with my I Pad one first generation.  It blows me off every time I try.  I have
    tried 6 different WIFI spots to be sure it was not the WIFI at home.  Just doesn't work?????

    I spoke to several other Ipad 1 users who have identical problems...worked well since the original purchase then
    recently....no WIFI.?????? 

  • TS1398 my iphone 5s will not connect to the internet via wifi  since the latest update was performed this morning need help

    unable to connect to the internet via wifi since the latest update

    Hello,
    Try Reseting your decive, check your settings or manually restore your iphone bu putting it in DFU mode and connecting it to iTunes there are many youtube videos on how to do this I hope it works and wish you good luck with it. If It doest call apple care.

  • Thinkpad Laptop X4F -Will not connect to internet via wifi

    I'm not computer savvy so please keep replies dummied down if at all possible. I used this laptop last on Friday and booted it today and cannot connect to the internet via wifi. No problems whatsoever before this. Checked with other computers and devices in the house and the wireless network and internet are working fine.
    Checked this laptop and wifi is on (airplane mode off), says its connected to the router (in connections) but icon in tray just scrolls and says "identifying". Using the LAN works fine. Looked at wireless card and it says device is working properly and is fully updated.
    This computer is running windows 8 which I'm still having trouble navigating through.
    Solved!
    Go to Solution.

    Have you tried turning off the Wifi and then back on? Windows 8 should have that if you press the start key and typing in Wi-Fi. Click on Settings when you search and something for connections should appear. Turn off WiFi then back on to see if that helps.
    Owner of: ThinkPad SL510, X131e, X230 (not fond of)
    Other systems: MSI GT640, Sony Vaio PCG 709K, Dell Latitude D430,

Maybe you are looking for

  • EAP-TLS authentication with ACS 5.2

    Hi all, I have question on EAP-TLS with ACS 5.2. If I would like to implement the EAP-TLS with Microsoft CA, how will the machine and user authentication take place? Understand that the cert are required on both client and server end, but is this cer

  • How to import .MOD files using log and trasfer

    I am trying to get some footage taken on my Cannon FS20 into final cut pro When i mount the camera and go into the SD_VIDEO directory, each clip has 2 files, a .MOD and a .MOI When I drag these clips into the log and transfer window i get the error "

  • How to check the generated work schedules

    Hi Friends, We have more than 30 Work schedule rules,  in which some of them have been generated some of not. So now I want to check which work schedules have not been generated. Kindly advice the how can I check the non generated Work schedules or g

  • SQLException: Connection has already been created in this tx context for...

    I get this Exception when i try to do persistance in one Oracle database after i received data from another Oracle database 2010-08-24 10:41:44,185 2497 [[ACTIVE] ExecuteThread: '8' for queue: 'weblogic.kernel.Default (self-tuning)'] ERROR com.btick.

  • Steps to change Logon URL in R12 Oracle EBS

    Hello there- Can anyone send me the steps or Doc ID to change the external URL in R12. We have 2 instances on a single Box. I need to differentiate the instance by their URL. Hostname being: development.abc.com example: Instance 1 should be : dev.abc