OSB - CVS Source code check-out to Eclipse (INDIGO OEPE11.1.1.8)

Hi ,
I am facing issue with CVS check-out. I have checkout the source code to eclipse from CVS and created one configuration project in the eclipse and drag and drop the OSB project into the configuration project but eclipse is showing so many errors and not displaying the code in designer mode. Could you please tell me the correct process to set up the OSB project in eclipse with the existing CVS source code, if I am wrong.
sometimes when i do drag and drop to configuration project , getting below error in eclipse :
Problems occurred moving the selected resources.
  Path for project must have only one segment.
  Path for project must have only one segment.

Hi,
You should be able to follow the document for the new version, check this link, may there is some difference...
http://docs.oracle.com/cd/E23943_01/dev.1111/e15866/developingeclipse.htm#OSBDV1385
Cheers,
Vlad
It is considered good etiquette to reward answerers with points (as "helpful" - 5 pts - or "correct" - 10pts)
https://forums.oracle.com/forums/ann.jspa?annID=893

Similar Messages

  • ESS source code check in error in CMS

    Hi Guys,
    Am getting the following error when trying to check in the ESS source code in the CMS NWDI .
    com.sap.cms.util.exception.CMSUnexpectedException: cannot load file: /usr/sap/trans/CMS/inbox/SAPESS06_0-20000512.SCA Error: Could not extract file SOURCEARCHIVES/DTRSAP_ESS.sc from archive /usr/sap/trans/CMS/inbox/SAPESS06_0-20000512.SCAAdditional error message is:No space left on device (errno:28)
    Though it said no space left, I was able to check in MSS PCUI_GP after this message was thrown when checking in ESS source code.
    I was also able to successfully check in and import all other .SCA files except for ESS.
    Appreciate any inputs.
    regards
    Sam

    Hi Sameer,
    The ESS component is the largest component to be imported and can be problematic in terms of space and memory available to the server. It is more than double the size of the mss package.
    This error is clear, you have ran out of space on you disk. Clear up the disk and ensure that you have around 5gb of space free.
    Regards
    Daniel

  • View source without checking out?

    Is there any way to view the source of a page on my site,
    without
    checking it out? Quite often I just want to check and/or copy
    a section
    of code to another file, and I'd rather not have to check the
    file out
    and then check it back in again each time.
    Thanks in advance
    Kevin

    Browse to it, and use View | Source in the browser?
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "Kevin Blount" <[email protected]> wrote in
    message
    news:ed47k5$qn9$[email protected]..
    > Is there any way to view the source of a page on my
    site, without checking
    > it out? Quite often I just want to check and/or copy a
    section of code to
    > another file, and I'd rather not have to check the file
    out and then check
    > it back in again each time.
    >
    > Thanks in advance
    >
    > Kevin

  • Download java.nio package source code

    Where can I find NIO source code? Any Java 5 version would be great.
    This code is open source.
    thanks!

    Sun's NIO source can be downloaded from the JDK d/l page.
    This IS NOT open source code, you have to agree to the license terms.
    If you want open source code, check out the OpenJDK project at java.net

  • Can't check out files from JDEV 9.02.798

    Hi,
    We are making a project prototype with JDEV (previously we use another IDE). We have put our files in CVS 1.2. We are able to log in, update and add files to CVS. Unfortunately, we are unable to find a way to check out the files. The only option to do this is via FILE>Source Control>Check out project, but we failed..cant find module name. We also try to right click the files > Source Control>...there is no check out option there. Can you guys help us? There is one option we havent done yet, that is FILE>SOURCE CONTROL>IMPORT PROJECT. What happen if we click this? will it add the project file to CVS? Will it overwrite existing project (assuming we have similar project name with previous..)...Thanks

    Hi,
    The first thing I'd recommend is upgrading your JDeveloper installation. 9.0.2.798 is not a production version of JDeveloper (in fact, it's Release Candidate 2 of 9.0.2). There have been two full production releases since then.
    To add files to CVS as a module, you should use the Import Project command. This will prompt you to enter a module name. After importing your module, you can check it back out (to a different directory) using the Check Out menu, and specifying the same module name you used in Import Project.
    There were some specific issues with JDev 9.0.2 and module recognition in CVS - if you're still having problems, upgrading to JDeveloper 9.0.3 is definitely worthwhile to pick up the latest features and bug fixes.
    Thanks,
    Brian
    JDev Team

  • BAM Portal Source Code

    Hi,
    Can I get complete source code of out of the box BizTalk BAM Portal?
    Thanks and Regards, Sagar.

    Hi sagar,
    <<BIZTALK INSTALLTION DIRECTORY>>\Microsoft BizTalk Server 2010\BAMPortal
    contains the image and stylesheet for your BAM portal. If you want to add your company’s image in the BAM portal, you can do so along with the Microsoft logo or play with these files, but the soruce
    code is not available. I don’t think the soruce code is avilable from BizTalk 2006 onwards.
    If you want to develop a custom BAM like porta lyou have some options:
    Use BAM Web Services,  Management and Query to create custom BAM portal.
    accessing data from BAMPrimaryImport  database’s
    bam_<Activity      Name>_AllInstances views
    Or useBAMManagementService
    API
    If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful.

  • Check out ESS source code

    Hi Experts,
    EP7.0 SP11 ESS1.0 ERP2005, NW2004s.
    NWDI is installed successfully and two tracks are created according to the NWDI cookbook for ESS. Development configuration is imported into NWDS. Here our NWDI DEV  system is used as local J2EE engine in NWDS for local test purposes.
    I also created a project under <b>InActive DCs</b> views in NWDS. In the web dynpro perspective I could see the source of the applications (ex. DC ess~ben). I have read in the forums to check out the source code. Here I do not see any option to check out!! where will I see the option?
    when a new project is created in Inactive Dcs view, it should ask for creating an activity, but this did not happen!! should i create a activity in DTR perspective?
    it seems to me i can make the changes in the inactive dcs and then activate them later and deploy into local j2ee engine (here NWDI DEV) for test purposes. Is it ok?
    Regards!

    Hi,
    WebDynpro should automatically check-out source files if you want to modify something.
    If you are not asked for an activity: Or you logged on? You didn't accitdentally check the checkbox "keep local for now" when creating a new DC? Or do you have an activity that is marked as default activity so the NWDS automatically added the files to that activity without an explicit dialog?
    Making changes, activating them later and deploying locally built (inactive) deployables into a local/test J2EE engine does make perfect sense to me. You are testing before you commit your changes and publish them to you colleagues (to switch language a bit). Sounds OK to me.
    Regards,
    Marc

  • Source Code Control - Check in problems

    Some of my vi's have been marked as "Server copy has changed" and some have even been marked with "both local and server copies have changed". When this is the case I cannot find any way to check in my VI without getting an error. Looking for a work around - help.

    kh,
    Which version of LabVIEW are you using? Built-in SCC have been rewritten from 6.0 to 6.1 and there are different issues related to each version.
    With 6.0 I have encoutered a bug that wrongly checked most of my VIs as "local copy has changed" as soon as they are in memory with panel closed. I worked with NI Support and we found no workaround. Unfortunately, this behavior stayed even when the VIs were upgraded in 6.1 so that my problem was a dead end. I switched with great success to CVS, another source code control software.
    I do not use 6.1 but if you do, make a search on NI's site and you'll find hits that address a SCC bug. If I remember correctly, checking out a VI, making a small change and checking it in again often solved the problem.
    G
    ood luck.
    LabVIEW, C'est LabVIEW

  • Source code doesn't seem to line up with the compiled classes in ECLIPSE

    I am trying to write a Tomcat servlet to parse an incoming message, however when I parse the message to get the parts out of it I get a a parse error that doesn't really tell me a lot.
    I have downloaded the source code for the Java Mail API 1.3.2 and attached it to the jar file in Eclipse.
    However when I debug the code and step through it I get two problems. 1) I get a warning that I can't see the local variables (not really a great problem). 2) The lines in the source code do not line up with where the stack says I am.
    I have checked the dates on the various classes and the source of the API and they seem to line up.
    I did try to recompile the classes just as an experiment but I am runing JDK_1.4.2_06 and the source seems to be set up for 1.5 and I have some missing classes. I can't switch to 1.5 because there are some other servlets running on this server that won't work on 1.5.
    Can anyone give me a clue how I can at least get the the correct line number.
    Thanks
    Brynn

    Has anyone any ideas on this please?

  • Unable to switch to trunk from branch checked out with CVS

    Help!
    We've run into a can't get there from here issue of not being able to switch back to the trunk when we've checked out a branch from CVS.
    Using JDeveloper Studio Edition Version 11.1.1.1.0
    Scenario:
    Working on maintained in CVS.
    Create Branch on code B1. (Versioning -> Branch, Branch Name = "B1", Source = "Trunk")
    Now we can't get back to the trunk. When you select switch branch it only shows HEAD. Select that and you end up on some IDE generated tag called "HEAD", where you can't add files or check in changes.
    How can you get back to the trunk?
    rodger...

    Are you aware that "always view this page in IE" isn't a standard feature in Firefox? It's a feature of a Firefox extension, which is why you can't find it on a Firefox help page.
    Check the download page for that particular extension to find out how to change that preference, or tell us which extension that is and we'll look for a FAQ page for that extension.

  • How to get Source Code out of SCA File

    I have a SCA file comprising SAP Ecommerce 5 solution. What I want to achieve is to get all the source code out of it including the original directory structure. Unzipping it doesn't give me the required results and requires a lot of manual work creating directories and more unzipping.
    I tried importing it into a Local SC in NWDS but it complains that " Import (into source SC) not possible: SCA doesn't contain DC sources".
    I don't have access to NWDI at this point.

    Hi,
    For getting the source code of the Business Package Content, follow the steps below:
    1. Make sure Source Archive is available for the Business Package.
    2. Create a NWDI Track, and include all dependencies (check SAP Note : 1080927 - Creating CMS Tracks for common Application Types )
    3. Once you have track in place, you can import the Track into NWDS
    4. In Development Configurations perspective of the NWDS you can see the track.
    5. Now create Project from Inactive Workspace to start modifying the code.
    Check the link for general links
    http://wiki.sdn.sap.com/wiki/display/JDI/NWDIRelatedNotesandLinks
    Hope this helps.
    Cheers-
    Pramod

  • JDeveloper 10g CVS package hierarchy gone after check out?

    Hello!
    We are using JDeveloper 9.0.5.2 (Build 1618) together with WinCvs 1.3.17.2.
    We successfully imported with JDev a project structure as
    client/moduleA/ui;
    client/moduleA/db;
    client/moduleA/ctr;
    client/moduleB/ui;
    client/moduleB/db;
    client/moduleB/ctr;
    into my repository - connecting with a pserver.
    If an other pserver-User tries to check out the module CVSRoot, the package hierarchy - as described above - is gone.
    All files are mixed up in flat packages ,,Miscellaneous Packages'' and ,,Miscellaneous Files''.
    The created file structure is ok (the package hierarchy remained). But as mentioned, the Application Navigator just shows the flat Miscellaneous file structure.
    For check out with the ,,Check Out from CVS Wizard'', in step 4 of 4, the options
    ,,prune empty folders'' ,
    ,,checkout into Target Folder'' ,
    ,,Do Not Shorten Pathnames'',
    were checked.
    What do we have to do, to see in the Application navigator - after a check-out - the imported tree of packages, instead of a flat structure?
    Thank you in advance for your answer!

    Hi,
    Was the project imported to CVS at the same time as the package structure?
    Do the project source paths match the filesystem? For example, does the java source path match the root of the java source? Jdev normally puts files in a flat structure if the files are not in the right file system folder for their java package.
    If changing the project path does not fix this can you tell me what technologies your using, such as BC4J, struts, Tag libs, etc.. Then I can try and reproduce this here.
    Many thanks,
    Geoff
    JDev SCM Team
    -------------

  • Check-Out by ABAP-Code

    Hi all,
    I need to check-out objects of the solution directory to the maintenance project  by ABAP code.
    What classes or function modules can I use?
    And can I use the same classes or function modules to check-in these objects later?
    Thank's for your help,
    Urs

    Hi,
    WebDynpro should automatically check-out source files if you want to modify something.
    If you are not asked for an activity: Or you logged on? You didn't accitdentally check the checkbox "keep local for now" when creating a new DC? Or do you have an activity that is marked as default activity so the NWDS automatically added the files to that activity without an explicit dialog?
    Making changes, activating them later and deploying locally built (inactive) deployables into a local/test J2EE engine does make perfect sense to me. You are testing before you commit your changes and publish them to you colleagues (to switch language a bit). Sounds OK to me.
    Regards,
    Marc

  • Eclipse - debug step is not synchronise with source code.

    Hi,
    I have an web application witch run on tomcat, when Idebug the application, the debug steps are not synchronize with the source code. Same thing when I change the code , after making the jar file and putting it in the WEB-INF/lib of the web application, the modifications didn't take place. It seem that the old code always remains. I looked at the compile class in the jar file and the modifications have been taken in to account.
    what can cause this kind of behavior ? I relaunch tomcat many times without succes ?
    any help ? thanks a lot.

    Can it be the case that you compile your JAR optimized, i.e. without debug information? Then your classes are also without debug information.
    This sounds very likely as a refresh problem. Be sure that both source files in Eclipse and class files in Tomcat have the same version (e.g. with simple system.out).

  • Check the source code in absence of physical Hardware

    For one of my applications, i have to work with 4 counters.So i increased counter input channels from 2 to 4 in the source code. But we are yet to get the hardware as we have a PCI card which can read 2 counters. But before we go for the hardware purchase, i want to make sure my source code which has 4 counters work.
    I want to know whether there is any provision to check increased counter channels functioning.
    Pls give me suggestion & procedure if you have any for this type of issues.
    thank you in advance
    -KIRIT

    Do you not know what the typical measurement is supposed to be? By failing data, I mean a measurement that is outside what you would expect. You need this if the count is supposed to be some value and you have code that takes some sort of action when it is outside a limit. If you don't really care, then just set it up to return a range of nominal values.
    Below is some simple code to generate a random number between a min and max range. You can replace the min and max with constants or just have the random count be a constant.
    I hope you are aware that the simulated count function would be used in place of the DAQmx Read/DAQ Assistant. For counters, you cannot use a simulate DAQmx device to return anything but a 0. You could have a case statement with one case having the DAQmx function and the other case having the simulated data function.
    Message Edited by Dennis Knutson on 07-24-2008 01:05 PM
    Attachments:
    Random Number Between a Range.PNG ‏3 KB

Maybe you are looking for