OSB to RestFul with Custom Header and Authentication

I am trying to add to OSB a RestFul service which requires authentication and custom http headers.
I am able to register the RestFul service as Business Service with following parameter
- Service Type: Messaging Service
- Request Message Type: None
- Response Message Type: Text
- Http Request Method: Get
- Authentication: Basic (Service Account)
When I test the Business Service in the Test Console, I passed in the custom http header and the content type and it did return back the JSON object I was expected.
However when I then try to create a Proxy against it with the following parameter, I had problem running it in the Test Console. Although I did pass in the http header it still complained that I didn't pass in the header. And as for Authentication, I was not even able to specify a service account like how I did in Business Service.
- Service Type: Messaging Service
- Request Message Type: None
- Response Message Type: Text
- Http Request Method: Get
Any ideas?
Thanks

What type of service account are you using ? If it is static you need specify the username/password in the PS. Also you do not specify service account for a proxy service. What is the error in the logs.
If you have to pass the HTTP header use transport headers in your request, select request type as http and then set the content type and custom http header.
http://docs.oracle.com/cd/E21764_01/doc.1111/e15867/modelingmessageflow.htm#i1125373

Similar Messages

How to print jTable with custom header and footer....

Hello all,
I'm trying to print a jTable with custom header and footer.But
jTable1.print(PrintMode,headerFormat,footerFormat,showPrintDialog,attr,interactive)
does not allow multi line header and footer. I read in a chat that we can make custom header and footer and wrap the printable with that of the jTable. How can we do that..
Here's the instruction on the chat...
Shannon Hickey: While the default Header and Footer support in the JTable printing won't do exactly what you're looking for, there is a straight-forward approach. You can turn off the default header/footer and then wrap JTable's printable inside another Printable. This wrapper printable would then render your custom data, and then adjust the size given to the wrapped printable
But how can i wrap the jTable's Printable with the custom header and footer.
Thanks in advance,

I also once hoped for an easy way to modify a table's header and footer, but found no way.
Yet it is possible.

Download internal table data into excel sheet with column heading and data

Hi,
I am having one internal table with column headings and other table with data.
i want to download the data with these tables into an excel sheet.
It should ask the user for file name to save it on their own name. They should give the file name in runtime and it should be downloaded into an excel sheet.
Can anyone tell what is the right function module for downloading these two internal table data with column heading and data.
what we have to do for storing the file name in runtime.
Can anyone help me on this.
Thanks,
Rose.

Hi Camila,
    Try this
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
    FILENAME                        = PATH2
   FILETYPE                        = 'XLS'
TABLES
    DATA_TAB                        = IT_DATA
   FIELDNAMES                      = IT_HEADINGS
EXCEPTIONS
   FILE_WRITE_ERROR                = 1
   NO_BATCH                        = 2
   GUI_REFUSE_FILETRANSFER         = 3
   INVALID_TYPE                    = 4
   NO_AUTHORITY                    = 5
   UNKNOWN_ERROR                   = 6
   HEADER_NOT_ALLOWED              = 7
   SEPARATOR_NOT_ALLOWED           = 8
   FILESIZE_NOT_ALLOWED            = 9
   HEADER_TOO_LONG                 = 10
   DP_ERROR_CREATE                 = 11
   DP_ERROR_SEND                   = 12
   DP_ERROR_WRITE                  = 13
   UNKNOWN_DP_ERROR                = 14
   ACCESS_DENIED                   = 15
   DP_OUT_OF_MEMORY                = 16
   DISK_FULL                       = 17
   DP_TIMEOUT                      = 18
   FILE_NOT_FOUND                  = 19
   DATAPROVIDER_EXCEPTION          = 20
   CONTROL_FLUSH_ERROR             = 21
   OTHERS                          = 22

Advanced Button creator with custom gradient and corners

Advanced Button creator with custom gradient and corners, check it here -
http://talkxe.com/?p=56

Advanced Button creator with custom gradient and corners, check it here -
http://talkxe.com/?p=56

Hi there i have ipod touch 2nd gen and i am tryna restore it but i get error 21 with orginal fireware and 1601 with custom fireware and when it connected to itunes and i try to boot it up by restoring it white screen with lines thorugh it

hi there i ahve ipod touch 2nd gen and i am tryna restore it but get error 21 with orginal fireware and 1601 with custom firewarw and when connected it to itunes and i try to boot it by resotring it white screen with lines through it

Those errors are covered here:
http://support.apple.com/kb/TS3694

Creating a custom report with detailed header and then associated detail

I am very new to CRMOD, so this question may be basic, but I have not found any good material yet to help me out, so here goes.
We are trying to create a Quote report that will be sent to our customers. The report needs to have both a header and detail section basically as follows:
<Header>
Quote Form
Date:
Expiration Date:
Sales Person Name:
Customer Name and address
Terms
... some other text data ...
<Detail>
Standard fields that define the quote, these are easy.
What I cannot determine how to do is create the header section. In the report designer, it only allows for a Title, logo, and another text line. Can anyone suggest another method?

I do not have the narrative option.
Options available are:
Title
Table
Chart
Pivot Table
Gauge
Active Filters
legend
Advanced
--> Column Selector
--> View Selector
--> Funnel Chart
--> Ticker
According to the documentation, the narrative view should be available from the advanced menu. Am I on a different package by chance?

Free Goods Import Process with Customs, Freight, and Other Taxes.

hi,
I have to import free goods but have to pay for Customs, Freight, and other Taxes.
1. If I tick Free Goods Indicator in PO Line Item, Condition Tab at line item disappears. It will not to calculate other conditions at Header level also. - So I cant execute this option.
2. If i take price of material and insert Condition Type: R001:Discount/Quantity with material price/qty, then it gives Error Message - "Price Must be greater than 0".
So, Is there any way through which I can procure Free Goods and can maintain conditions for Customs, Freight, and other Taxes in Purchase Order.
Please help me in this regard.
- Jignesh

Hi,
1) Create an import PO in ME21N with material price and all custom duty conditions (as you normally create). no need to put free tick indicator.
2) Process MIRO for goods and delivery costs simultaneously.
3) Maintain zero amount for goods item and actual values for the duties (Ensure selection of goods item including delivery cost items)
4) Save the LIV document
5) Check PO item history got updated with IR-L and DCIn. (IR-L will updated with zero amount)
6) Do MIGO w.r.t. IR document number.
7) GR FI document will get updated with the non-set off duty values only.
Regards
Rajesh

Need to output data to TXT with static header and footer but multiple rows

Using APEX 4.0 and 11g - The only way I could find to get data out of APEX in TXT format was to use htp.prn. I load a cursor with the data and this works fine, the problem is that I need to have the file start with a string (*:P9_HEADER_STRING*) but it can only appear once in the output.
Is there a way to add the *:P9_HEADER_STRING* to the output in a single TXT file? or is there another way I should be doing this?
This is what I have now: The *:P9_HEADER_STRING* is in the loop which I know it can't be, but I can't figure out how to concatenate this string to the output from the loop. The rank() is being used because I can only send the selected number of records, ranked from highest. (I will have to do the same thing with a footer too, but that variable isn't in here yet)
begin
-- Set the MIME type
owa_util.mime_header( 'application/octet', FALSE );
-- Set the name of the file
htp.p('Content-Disposition: attachment; filename="cra_outgoing.txt"');
-- Close the HTTP Header
owa_util.http_header_close;
-- Loop through all rows in CLIENT_TABLE
for x in (select * from (select XREF_NBR
, TOT_AMT
, '' SPOUSE_INFO
, '' PHONES
, NAME
, SURNAME
, '' MARITAL_STATUS
, '' EMPLOYER_INFO
, GENDER
, '' CO_ADDRESS
, '' PREV_ADDRESS
, POSTAL_CODE
, ADDRESS1
, '' FILLER
, rank() over (order by tot_amt desc, rownum asc) rn
from client_table c where c.File_Seq_Nbr is NULL and c.xref_nbr in (select xref_nbr from ticket_table where to_char(ticket_issue_date, 'YYYY-MM-DD') between :P7_START_DATE and :P7_END_DATE))
where rn <= :P7_NUMBER_RECORDS)
loop
-- Print out a portion of a row,
-- separated by commas and ended by a CR
htp.prn( *:P9_HEADER_STRING* || '03' || lpad(X.XREF_NBR, 12) || lpad(x.TOT_FINE_AMT, 11, '0') || '0201'|| lpad(x.NAME, 30) || lpad(x.SPOUSE_INFO, 60) || '00000000000000000000'|| x.DATE_OF_BIRTH || '0000000000000000' || x.GENDER || x.MARITAL_STATUS || lpad(x.EMPLOYER_INFO, 60) || lpad(x.CO_ADDRESS, 102) || lpad(x.ADDRESS1, 30) || lpad(x.POSTAL_CODE, 9) || lpad(x.FILLER, 21) );
end loop;
-- Send an error code so that the
-- rest of the HTML does not render
htmldb_application.g_unrecoverable_error := true;
end;

Yes, I've already done that, hence this part of the code I pasted above:
begin
-- Set the MIME type
owa_util.mime_header( 'application/octet', FALSE );
-- Set the name of the file
htp.p('Content-Disposition: attachment; filename="cra_outgoing.txt"');
-- Close the HTTP Header
owa_util.http_header_close;
-- Loop through all rows in CLIENT_TABLE
-- Send an error code so that the
-- rest of the HTML does not render
htmldb_application.g_unrecoverable_error := true;
end;
I've solved my problem by loading the cursor data into a variable (inside the loop) and concatenating the header info to it (outside the loop). This works when there are only a few records but as soon as I get to 32767 bytes it's throwing an error because of the size. So that's a different issue altogether.

Print jTable with a header and footer panel

Hi Folks,
I'm currently at a sticking point in a project I'm playing around with. I have a data set of around 300 objects that i'd like printed out in a table. Now, I've gotten the display part down without a hitch but printing the data as well as a header panel and footer panel has been eluding me. I'd basically like something like this...
Name: some name Order date: some date
Address: some address Shipped To: some address
somewhere Some city, some state, etc
in some city
Date | Title | Etc | Etc | Etc
date1 title1 5 $3.00 $15.00
date1 title1 5 $3.00 $15.00
date2 title1 5 $3.00 $15.00
date2 title1 5 $3.00 $15.00
Total purchases: $60.00
Total Items: 20
# of Orders: 2
Am I barking up the wrong tree by making the first and third sections panels and the second section a table? If not, how the heck do I accomplish this? Most of the time the table has been multiple pages as well - I only need section one on the first page and section three on the last page, but whatever is easiest really.
My current approach has been basically to make a custom printables, print the first section, figure out how high it was, print the second section and hope for the best, but the third would never show up because it'd never go over two pages.
Any help would be very much appreciated.
Thanks,
Stephen
Edited by: stephenliberty on May 7, 2009 9:11 AM - more specific subject

I suppose as a quick update, this is as far as I've gotten and will likely get-
public class PrintForm extends JFrame implements Printable{
    JComponent headerPanelForPrint;
    JComponent footerPanelForPrint;
    JTable dataTableForPrint;
    public void setPieces(JComponent header, JTable table, JComponent footer){
        this.headerPanelForPrint = header;
        this.footerPanelForPrint = footer;
        this.dataTableForPrint = table;
    public int print(Graphics graphics, PageFormat pageFormat, int pageIndex) throws PrinterException {
        graphics.translate((int)pageFormat.getImageableX(), (int)pageFormat.getImageableY());
        TableFormat tableFormat;
        if(pageIndex>0){
            tableFormat = new TableFormat(0, footerPanelForPrint.getHeight());
        } else {
            headerPanelForPrint.printAll(graphics);
            tableFormat = new TableFormat(headerPanelForPrint.getHeight(), footerPanelForPrint.getHeight());
        MessageFormat footer = new MessageFormat("Page - {0}");
        Printable table = dataTableForPrint.getPrintable(PrintMode.FIT_WIDTH, null, footer);
        int printme = table.print(graphics, tableFormat, pageIndex);
        if(printme == table.NO_SUCH_PAGE){ return table.NO_SUCH_PAGE; }
        return Printable.PAGE_EXISTS;
class TableFormat extends PageFormat {
    double footerHeight;
    double headerHeight;
    public TableFormat(double headerHeight, double footerHeight){
        this.headerHeight = headerHeight;
        this.footerHeight = footerHeight;
    @Override
    public double getImageableHeight() {
        return super.getImageableHeight() - ( this.footerHeight + this.headerHeight );
    @Override
    public double getHeight() {
        return super.getImageableHeight() - ( this.footerHeight + this.headerHeight);
    @Override
    public double getImageableX() {
        return 0;
    @Override
    public double getImageableY() {
        return this.headerHeight;
}It works very well with just a header and the table, but I still have not been able to get a footer to show up in the appropriate spot or (preferably) on the last page.
Edited by: stephenliberty on May 8, 2009 12:29 PM

Java code to connect to WSDL file with custom header

Hi all,
I am an absolute noob when it comes to Java. I need to write a Java app that can connect to a WSDL file with a custom header. Basically, all I need to do is connect to the web service and pass a username and password.
Any help would be appreciated.
Thanks,
A

Better you use tools which can generate code(interface,proxy and stub classes) which can take care of calling all the WSDL defined methods..i generally use RAD not an open source as per OP use eclipse open source or netbeans which can do the trick

Calling AdvancedDataGridSortItemRenderer with custom header

HI,
I have searched for a few hours now no luck...
I have an advanced datagrid, with a lot of columns showing
small check mark icon for boolean value.
To make the columns smaller, I made a simple headerRenderer
that rotates the labels 90 degrees, so they run vertical.
but I lose the sort arrow these columns.. Looking the docs
http://livedocs.adobe.com/flex/3/langref/mx/controls/advancedDataGridClasses/AdvancedDataG ridHeaderRenderer.html
under
sortItemRenderer
Note that the sort item renderer controls the display of the
sort icon and sort sequence number. A custom header renderer must
include code to display the sort item renderer, regardless of
whether it is the default or custom sort item renderer.
How do I call that from my code

Hi Juan,
Here I have written the form and program name.
And here is the 185F definition.

Content Conversion: One row with one header and multiple item structures. Possible?

Dear all,
I have a input that looks like this:
HeaderKeySomeHeaderInformationItemKeySomeItemInformationItemKeySomeItemInformation...
Here's the actual input
TEHGMESS0026000000288S0001TEI2____026200006112410400000000           18010000000000                                                      00126000000000126000120600000000002000000000                                    000WESTMONOBERTBE2014052309422408120003 000000000000000000000000000000JTEI2____026200006112410400000000           19010000000000                                                      00126000000000126000120600000000002000000000                                    000WESTMONOBERTBE2014052309422408120003 000000000000000000000000000000J
HeaderKey = TEHGMESS
ItemKey = TEI2____
Is it possible to process this via MessageTransformBean (my actual scenario is JMS to IDoc)? I already tried but I only succeeded when having new lines in my input to separate between Header and (multiple) Items.
So when the input and my configuration looks like below it works, but when I only have a single row input it doesn't work, even when specifying xml.recordHeader.endSeparator = '0' / xml.recordItem.endSeparator = '0'. I even tried xml.endSeparator = '0' but no luck.
Input that works
TEHGMESS0026000000288S0001
TEI2____026200006112410400000000           18010000000000                                                      00126000000000126000120600000000002000000000                                    000WESTMONOBERTBE2014052309422408120003 000000000000000000000000000000J
TEI2____026200006112410400000000           19010000000000                                                      00126000000000126000120600000000002000000000                                    000WESTMONOBERTBE2014052309422408120003 000000000000000000000000000000J
Matching configuration that works for input which structures are delimited by new line.
Paramentername
Parametervalue
Transform.Class
com.sap.aii.messaging.adapter.Conversion
Transform.ContentType
text/xml;charset=utf-8
xml.conversionType
StructPlain2XML
xml.documentName
MT_TEI2Split
xml.documentNamespace
http://hansgrohe.com/pi/MQ/TEI2/10
xml.keyFieldName
SATZARTKey
xml.keyFieldType
CaseSensitiveString
xml.processFieldNames
fromConfiguration
xml.recordHeader.fieldFixedLengths
8,4,9,1,4
xml.recordHeader.fieldNames
SATZARTKey,SATZLENHG,NUTZLEN,MESSAE,MESSNR
xml.recordHeader.keyFieldValue
TEHGMESS
xml.recordItem.fieldFixedLengths
8,4,2,10,8,19,3,3,2,10,6,2,10,6,2,10,6,6,6,6,6,11,9,2,10,6,2,10,6,3,4,3,7,14,8,1,31
xml.recordItem.fieldNames
SATZARTKey,SATZLEN,BUCHART,TRNR,ANDGNR,MITEM,TEIVARI,BSTSTATU,REFTYP,ORNO,POS,REFTYP1,ORNO1,POS1,CHATYP,CHARGE,CHAPOS,ABBVONL,ABBNACH,ZUBVONL,ZUBNACH,I2MENG,I2BUNR,REFTYPN,ORNON,POSN,REFTYP1N,ORNO1N,POS1N,BSTSTATN,ABUSERAB,ABUSERFN,ABUSERNA,I2TIME,I2LIDNR,I2FMCODE,FILLER
xml.recordItem.keyFieldValue
TEI2____
xml.recordsetName
records
xml.recordsetStructure
recordHeader,1,recordItem,*
Any clues on this? Is it even possible to have multiple structures in one row? Many thanks in advance
Jens

SAP came back to me with this answer:
First, I would like to point the documentation for Message Transform
Bean (MTB) in 7.4:
http://help.sap.com/saphelp_nw74/helpdata/en/57/0b2c4142aef623e10000000a155106/content.htm?frameset=/en/57/0b2c4142aef623e10000000a155106/frameset.htm&current_toc=/en/45/0ea2de423c2d6be10000000a11466f/plain.htm&node_id=18
As it is written at the beginning of this document, MTB is used to
call classes written for the Plain Adapter Engine. So you may find
additional documentation about the parameters for convertion in the
documentation of the Plain Adapter Engine
(http://help.sap.com/saphelp_nw74/helpdata/en/0d/00453c91f37151e10000000a11402f/content.htm?frameset=/en/1b/d5ef3b1ad56d4fe10000000a114084/frameset.htm&current_toc=/en/75/246b3de666930fe10000000a114084/plain.htm&node_id=11).There it is written that the structures by default are
arranged line-by-line. The endSeparator just adds additional character
string as a separator after the last column in a row.
I hope that this answers your question. MTB expects the data to be
structured line by line.
You may add a custom module, which transforms the message in the
expected format.
If you have a look at the second link there's even a more precise wording that multiple structures within one line are not supported:
xml.NameA.endSeparator
Even if no specification is made here, a line break must follow since substructures are always expected as a line of the document.
Bottom line is that it's not supported by now and verfied by me with PI 7.4 SP5
Many thanks to Ambrish, Amit and Hareesh for the valuable input. Will probably try to work things out for now following Ambrish's / Hareesh's suggestion as this seems easier to implement. Amit's proposal with a dedicated module however would probably be the more polished solution.
Cheers
Jens

Custom Header and Custom policy

In one of my BPEL service I need to create Custom security policy which generated custom SOAP header.
To be clear when we use Usernametoken client security policy, Soap header with username and password elements gets generated for a request payload. In the same way I need to create a client policy which generates custom soap header while request is sent.
Can anyone suggest, how to do this.
Sowmya

Thanks Anuj all these says how to customize the existing policy
But my requirement is to create a custom header in SOA 11g
Example if we use WSSE UsernameToken Header, in SOAP request header we get as
<soap:Header>
<wsse:Security xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
<wsse:UsernameToken>
<wsse:Username>username</wsse:Username>
<wsse:Password>password</wsse:Password>
</wsse:UsernameToken>
</wsse:Security>
</soap:Header>
In the same way I want to create a custom header
<soap envelope ch="namespace">
<soap:Header>
<ch::CustomHeader>
<ch:customelement1>Value1</ch:customelement1>
<ch:customelement2>Value1</ch:customelement2>
<ch:customelement3>Value1</ch:customelement3>
</ch:CustomHeader>
</soap:Header>
One of the options for this is to give an input header variable in the BPEL service invocation, but I do not want this way
Is there any other way to create it in em console since multiple services use this header
Thanks,
Sowmya
Edited by: 1004017 on May 10, 2013 8:20 AM

Changing colors/style sheets with custom header portlets?

We would like write a completely custom header portlet (a standard portlet that is designated as a header, notusing the branding server), but I can't seem to find a way to change the style sheets in subportals when I do this.
Am I missing something? Do you have to use the branding engine to control style sheets in subportals, or is there another way?
Chris StoffelPortal DeveloperHalliburton KBR

------- developersupport wrote on 12/11/03 4:24 PM -------
The way Branding accomplishes what you're looking for is by setting a portlet setting called "Portal-Style" on the header portlet using the EDK. This setting can be set either as an Admin level or CommunityPortlet level setting. When the portal loads a page with a header, it will check to see if the header has this preference set (first on the CommunityPortlet level, if the header is on a community, and then on the Admin level). If so, the portal will cause everything to use the stylesheet specified in the setting value.
The setting value is the name of the stylesheet. For example, if you wished every page displaying the header to be orange, you could set the "Portal-Style" Admin setting on the portlet to a value of "mainstyle17", the orange-themed stylesheet.
Perhaps I'm not setting the preference properly. Sniffing the HTTP headers between the gadget and portal servers, I do see:
[HTTP_CSP_GLOBAL_GADGET_PREF] => Portal-Style=mainstyle17
(I also tried it with Portal%u002DStyle, but neither works)
The remote server header portlet doesn't seem to be picking up the fact that there is an admin pref to override the main page's stylesheet. Did I create the portlet wrong, or am I setting the preference incorrectly, or what? Thanks

Problems with Customer Service AND unexplained charges!

I've been with Verizon for I-don't-know-how-many years, and through the years you are bound to have a few problems here and there but some of the problems are just ridiculous! It's also the same reocurring problem!!!!!!!!!!!!!!!! I was with Alltel first, before it was bought out by Verizon. The years I was with Alltel, I didn't have near as many problems. It seems EVERY time I do the smallest change or something to my phone or bill, I get a ridiculous amount of charges that I was NOT aware of, nor told about... EVEN IF I ask "So this isn't going to change my bill, or there will not be any unexpected/unexplained charges that I don't know about?"... BUT not matter how many times I ask... and NO matter how many times I am told "no"... there always is. For example.... last year, I updated and signed a new 2 year contract and purchased the first Driod. Before, my 30 day warranty was up, I was having problems with my Driod, and decided to send it in and get a new one. Before I did this.. I called customer service to make sure there would be no interuption in my bill, and there wouldn't be any unexpect charges, and there would be no difference in anything. I was told there was not, and once I recieved my new phone, just send it in and nothing would be changed. Of course, when I get my bill.. I see I was charged $500 for the new phone. It was explained to me that my credit card was reimbursed (which I never check that card, because I never used it expect to purchase the phone) and that I was recharged for the new phone, since it was a new phone. So I had to fork out the $500 (on top of my bill) and then wait months to get the $100 rebate card. Months after that, I "assumed liablity of my line" because I was on a plan with my family. I decided to have my own line, so I "assumed liability." I was not told that when I did that, I "renewed" my contract date. So I just added 6 more months to my 2 year contract. Was NOT told about that! Then again...... I was recently having problems with my Driod (the screen went black and would not come back on.) I had to turn on an OLD motorola razor, so I would not be without a phone for two days while I was waiting on my phone to come in. As soon as my phone came in, I had my Droid turned back on. I recieved my bill recently, and my bill was $200 over what it normally should be.... so I called in... apparently, when I had my phone replaced, they dropped off my data package and when I recieved my replacement driod, they never put it back on. So I was being charged for alllll my data usage... again I was NOT told about this. I wasn't even aware that they had dropped off my data package, and when/where did they get the authority to do that??? These are just a FEW of the problems that I have had.................................
Does anyone have these reoccuring problems!?

I understand that my bill can be viewed online, and I do view it fairly regularly, so if there are any unexplained charges, I can call Verizon asap. The problem does not come from me not understanding my bill, but from customer service. I have been with Verizon for a very long time, and it is a continuing problem. Where did Verizon get the 'OK' to drop my data package off my plan? Who authorized that?
After calling Verizon and trying to find out the problem, the gentleman told me that when I activated on old phone while I was waiting on my new Droid to arrive, my data package was dropped off and I "should" have been told about that. When I reactiviated my new Droid, I "should" have called and had them restart my data package. I was not aware that when you activate an old phone that data plan is taken off your plan. In all my years of having cell phones, I never make two years with one phone. I have always, at one point, had to turn on an old phone, and my data package has NEVER changed. Why would I have my data package dropped and why would I have to call Verizon to have it restarted. I would never know to do that unless I was TOLD that my data packaged HAD to be re-added when I recieved my new phone, but I was never told of that.
All of that is beside the point, the point is, Verizon was never given the authorization to change my plan. Never. My bill was taken care of and readjusted, and I am thankful for that. It does not change the fact it is always a hassle with Verizon Customer Service and I am always the one having to PROVE that I am not at fault, or that I was NEVER told of certian things. EVERY TIME I HAVE CALLED CUSTOMER SERVICE, I AM TOLD "I'M SORRY, THEY SHOULD HAVE TOLD YOU THAT."
"they should" does not help my bill with the extra armount of charges.

OSB to RestFul with Custom Header and Authentication

Similar Messages

Maybe you are looking for