OSB write windows & keep volume set(Retention duration)
Hello, all
When I make a Media Family on secure backup, can configure time managed keep volume set and write windows.
As I know other vendor's backup software also has retension configurations.
ex) Symantec Veritas case
If I make a policy with 1 weeks retenstion, same policy's backup image can be writable to media and appendable.
And, If one media has a full capcity, backup software looking for other media.
Retention Poliy check the media backup image and decide expired(recycle) date according to last backup image.
2014/04/01 Full Backup(retention 1weeks) using new media(TEST01)
2014/04/02 Full Backup(retention 1weeks) using existing media(TEST01) append
2014/04/03 Full Backup(retention 1weeks) using existing media(TEST01) append and media Full.
The Expried date for TES01 media is 2014/04/10 because of last backup image.
ex) Secure Backup case
If I make a media family with 7days write windows and 10days time managed keep volume set,
2014/04/01 Full Backup using new media failmily(TEST01)
2014/04/02 Full Backup using existing media(TEST01) append
2014/04/03 Full Backup using existing media(TEST01) append and media Full.
when can I use this media again and when is the exactly media expired date?
I want to know write windows(is it meaning of not appendable?) and keep volume set(is it real retenstion?) meaning..
Thank you advanced.
The retention period starts as soon as the write window closes, it doesn't matter if the tape becomes full, the write window remains the same so the tape will close on that date. You can do an "obtool lsvol -l" on a tape and see when it will close and when it will expire :
obtool lsvol -l -b ADC00003
Volume OID: 29091
Volume ID: FullBackups-002467
Barcode: ADC00003
Volume sequence: 2
Media family: FullBackups
Created: 2014/02/18.04:01
Closes: 2014/03/18.04:01 (closed)
Expires: 2014/06/18.04:01
Space remaining: none
Original OID: 29091
If you want a backup to be kept for exactly 14 days then your write window+retention needs to equal 14, so it could be 7+7. 13+1 is also fine, assuming you are not looking to send the tapes out of the library, and that will also ensure your tapes are used to their capacity.
Thanks
Rich
Similar Messages
-
I am trying to setup my Time capsule via a ethernet cable as a back up for a new iMac. The on button on the time capsule set up window keeps failing to stay on. Any ideas what to do?
A PC can have more issues connecting than a Mac.
But it really should not matter.. so just try it in situ.. press and hold the reset.. once it starts up, it will return to default IP, 10.0.1.1 the PC should then be able to find it via the airport utility.
If not drag it over to the Mac and plug in there by ethernet.. or since it is a laptop, really should not be that difficult to drag the Laptop and plug it into the TC.
Important thing is to get access to the TC.
The Mac if it is running lion, then you MUST download and install 5.6 airport utility to do anything useful.
http://support.apple.com/kb/DL1482 -
ITunes 11.0.4 for Windows keeps restarting and removing my set-up and preferences
iTunes 11.0.4 for Windows keeps restarting and removing my set-up and preferences every time its shut down and re-opened, how can I stop this?
All of the music (etc) is still there but I need to agree to the terms and condition of the 'Software License Agreement for iTunes for Windows' every time I open iTunes.
Once opened there is no personal set-up, such as side menus and how the lists are set-up (e.g showing album images, music listed in ‘most played’ order,etc etc) I know how to re-do all of my settings, Its just getting very annoying now.
Anyone know how to stop this or at least why It is doing it?I found why it defaults back to the wizard. I noticed in C:/users/(User)/AppData/Roaming/Apple Computer/iTunes/iTunesPerfs.xml file is deleted from this directory upon exiting iTunes. When I manully restore this file itunes starts with my correct settings. Why the .xml file being deleted I don't know. iTunes is deleting the file when you exit so I guess there is just a bug.
-
Have Mac OS 10.7.4 installed on an iMac-3.1 GHz Intel Core i5...the Finder will not find files on Windows mounted volumes...what setting should we be using...tried the same/working settings as our iMac 10.6.8...did not work for 10.7.4!
Added note: We are tring to find files on Windows 2008 Server Standard...
-
Volume setting used to be displayed on window that has disapeared and can not see volume setting or
on pavilian dv8 the volume setting is touch and slide and used to show up on window as a slide bar but that window no longer appears up so i can not see volume setting how do i get it back
Hi,
Use Recovery Manager to reinstall HP MediaSmart SmartMenu - using recovery manager to reinstall drivers and software is described further in the document on the link below.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01868333&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US...
After the reinstallation has completed, restart the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
In Windows 8.1, the Thunderbird window keeps resizing
I have a new Transformer T100A laptop, running Windows 8.1 Pro. I run Thunderbird in desktop mode. The height of the Thunderbird window keeps getting small, while the width remains the same. I usually have my folder mails in the top pane, and the open message in the bottom pane. When I open Thunderbird, it often, but not always, comes up with such a short window that I can't see any of the open message at all, and only a few lines of the messages in the folder. This happens often even when I haven't closed Thunderbird, but the computer has gone into battery saving mode. This is not a huge problem, but it's annoying to have to resize the window almost every time I use Thunderbird.
Hi,
You can try the steps in following article:
Using Pictures from Active Directory
http://msitpros.com/?p=1036
This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites; therefore,
Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. There are inherent dangers in the use of any software found on the Internet, and Microsoft cautions you to make sure that you
completely understand the risk before retrieving any software from the Internet.
For your reference, here is the similar thread with different method:
http://social.technet.microsoft.com/Forums/en-US/d6e7b2c3-c343-4900-a01d-24bfb30357b6/is-there-a-solution-to-set-user-account-picture-from-active-directory-thumbnailphoto-attribute-in?forum=w8itproinstall
Hope these would be helpful.
Kate Li
TechNet Community Support -
Hi all.
I need some help. I have recently installed a new Hard Drive in my Macbook and have re-installed Snow Leopard. Since doing so there have been a few things that haven't been quite the same.
1) Certain buttons decided they didnt want to work anymore. These being the Space Bar, the Tab key, all four arrow keys, Caps lock, Volume up, Eject, and a few others.
After putting up with this for a couple of weeks and looking at numerous forums, they all of a sudden came back to life (Hence why I'm actually able to type this message) THEN, they packed up again. Then started again, then packed again, and so on. They seem to have a mind of their own.
Please... does anyone know whats going on? Is it a hardware prob? Is it something to do with the way Ive installed the Hard Drive? Have I forgotten to do something?
2) Ever since my buttons initially came back to life, the "Do you want to restart you computer?" window keeps popping up every couple of minutes.
It's the window that says "Restart, Sleep, Cancel, Shut Down"
It's driving me insane and I can't help but think that the two probs are related.
If anyone out there has any ideas at all, they would be most welcome.
Many thanks in advance
MadDogSnapsHave you tried reinstalling the original drive? Same symptoms with it?
-
Advice on RAID Sets, Volume Sets, and RAID Levels of the Volume Sets using an Areca Controller
I have read through a lot of information on disk usage, storage rules for an editing rig, users inquiries/member responses in this forum and I thank each and every one of you – especially Harm.
In building my new workstation, I purchased five (5) WD 1T, 7k, 64M SATAIII hard drives and an Areca RAID card, ARC-1880ix-16-4G, which I plan to use primarily as my media/data disk array. The workstation will use a 128GB SATAIII SSD as the OS/program drive and I will transfer two (2) WD Raptor/10k SATA 70GB drives from my current system for pagefile/scratch/render use. I tentatively plan on using a mobo SATAIII port for the SSD and mobo SATA ports with a software RAID (level 0) for the 10k Raptors.
In reading the Areca Instruction manual, I am now considering exactly how I should configure the 5 physical 1TB drives in terms of RAID Level(s), Volume Sets, and RAID Sets. I must admit that I like the opportunity of allowing for a Dedicated Hot Spare as I am generally distrustful of the MTBF data that drive vendors tout and have the bad experience in the past of losing data from a mal-configured RAID array and a single drive hardware failure (admittedly, my fault!).
In line with the logic that one doesn’t want to perform disk reading while trying to write at the same time (or vice-versa), I am thinking the approach above should work OK in using the mobo disk interface and both software and external hardware RAID controllers without having to create separate RAID level configurations within a Volume Set or further dividing up the physical drives into separate RAID sets. I know in forum messages that Harm noted that he had 17 drives and I could envision a benefit to having separate RAID sets in that situation, but I am not at that point yet.
To some degree I think it might be best to just create one RAID Level on one Volume Set on one RAID Set, but want to solicit thoughts from veteran controller users on their workflows/thoughts in these regards.
Anyone care to share thoughts/perspectives? Thanks
BillThanks for the speedy feedback Harm - I appreciate it.
I was thinking RAID level 3 as well.
Of course, it's always something! I purchased the Caviar Blacks by mistake - which are non-TLER. I will work with EggHead to return the ones I purchased and replace them with RE4 versions as I'm not thrilled about the possibility of the controller declaring the volume/disks degraded unnecessarily and although I have the DOS utility WDTLER where one is supposed to be able to enable/disable TLER on WD drives - I suspect WD is way beyond that now anyway with current builds.
I agree with you about just testing the performance of the options for the raptors - on the mobo and then on the controller. When I benchmark them I'll post the results in case others are curious.
Thanks again....off to EggHead! -
Windows keeps corrupting WU stores
I'm not sure if somebody else had this problem before, but for me this keeps happening every couple of weeks. It happened for the third time recently.
Out of the blue on shutdown Windows says that it's installing updates with the typical counter of percent complete going up. This is weird for a couple of reasons. First, no new updates were available. Second, the updates are configured to be confirmed, so
they cannot be applied automatically. I have confirmed in the update history that indeed no update was installed at that time.
So, on the next startup Windows finishes installing fictional updates again with the typical counter going up until it reaches 100% and then the message is displayed that Windows Update Cleanup is taking place (or something to that tune - I don't remember the
exact message). This step takes considerable time, I'd say at least 15 minutes with heavy disk I/O. Then when I'm finally able to login the CPU spikes with TrustedInstaller hogging one CPU core. When TrustedInstaller finally is done with its thing (a long
time, 2 hours or so) I get a pop up balloon saying that new updates are available. The problem is the "new" updates are quite old and I'm positive that they were installed before. Previously it was .NET framework fixpak or something like that, and
this time they are some security updates, one of them even dating back to 2012. If I let the updates to be applied the same set of updates will be displayed again and again. There is no way of getting out of this vicious cycle.
Obviously, Windows Update stores keep getting corrupt, but my question is why Windows keeps doing this to itself?
The Windows application error log has lots of informational events 1001 WindowsWcpOtherFailure3 pointing to Windows::Rtl::SystemImplementation:: DirectRegistryProvider::SysOpenKey API call (I assume). There are more details in those events, but I don't think
those details are very relevant here.
Is there a way to restore just the WU stores from backup? What I've been doing so far was to restore the whole partition from the latest image (taken monthly) and then restore all the user data from backups, but this is extremely tedious and time consuming
process, and it seems to be only a temporary fix, as like I said this keeps happening every couple of weeks and there is no reason to believe that it won't happen again.
I'd appreciate all the suggestions as to why is this happening and how to fix the issue without resorting to complete partition restore and then restoring the user data.Hi Andy,
Thanks for suggestions. I've already the latest update agent installed on my system. I've reset the WU components, but that didn't help. I'm getting error 80070002 (most of the time) and occasionally errors 80080005 and 80244010. When I checked the WindowsUpdateClient
log that you pointed me to I noticed the same error 80070002 first appearing on 1/25. That's about the time the corruption happened. Before that date there were only informational entries, no errors.
I ran System Update Readiness Tool and this is the log file:
Checking System Update Readiness.
Binary Version 6.1.7601.22471
Package Version 22.0
2014-02-01 14:23
Checking Windows Servicing Packages
Checking Package Manifests and Catalogs
Checking Package Watchlist
(f) CBS Watchlist Package Missing 0x80070002 Microsoft-Windows-Foundation-Package~31bf3856ad364e35~amd64~~0.0.0.0 Package_2_for_KB980232~31bf3856ad364e35~amd64~~6.1.1.0 Package
registry presence failed, possibly an orphaned package on package watchlist
(f) CBS Watchlist Package Missing 0x80070002 Microsoft-Windows-ServerCore-Package~31bf3856ad364e35~amd64~~0.0.0.0 Package_2_for_KB980232~31bf3856ad364e35~amd64~~6.1.1.0 Package
registry presence failed, possibly an orphaned package on package watchlist
Checking Component Watchlist
(f) CBS Watchlist Component Missing 0x80070002 amd64_microsoft-windows-smb10-minirdr_31bf3856ad364e35_0.0.0.0_none_089d1cba4bf65af1 Package_2_for_KB980232~31bf3856ad364e35~amd64~~6.1.1.0
Package registry presence failed, possibly an orphaned package on package watchlist
(f) CBS Watchlist Component Missing 0x80070002 amd64_microsoft-windows-smb10-minirdr_31bf3856ad364e35_0.0.0.0_none_089d1cba4bf65af1 Package_2_for_KB980232~31bf3856ad364e35~amd64~~6.1.1.0
Package registry presence failed, possibly an orphaned package on package watchlist
(f) CBS Watchlist Component Missing 0x80070002 amd64_microsoft-windows-smb20-minirdr_31bf3856ad364e35_0.0.0.0_none_0ad386cc8a4d8e62 Package_2_for_KB980232~31bf3856ad364e35~amd64~~6.1.1.0
Package registry presence failed, possibly an orphaned package on package watchlist
(f) CBS Watchlist Component Missing 0x80070002 amd64_microsoft-windows-smb20-minirdr_31bf3856ad364e35_0.0.0.0_none_0ad386cc8a4d8e62 Package_2_for_KB980232~31bf3856ad364e35~amd64~~6.1.1.0
Package registry presence failed, possibly an orphaned package on package watchlist
(f) CBS Watchlist Component Missing 0x80070002 amd64_microsoft-windows-smbminirdr_31bf3856ad364e35_0.0.0.0_none_ff89fe6651a51c8f Package_2_for_KB980232~31bf3856ad364e35~amd64~~6.1.1.0
Package registry presence failed, possibly an orphaned package on package watchlist
(f) CBS Watchlist Component Missing 0x80070002 amd64_microsoft-windows-smbminirdr_31bf3856ad364e35_0.0.0.0_none_ff89fe6651a51c8f Package_2_for_KB980232~31bf3856ad364e35~amd64~~6.1.1.0
Package registry presence failed, possibly an orphaned package on package watchlist
Checking Packages
Checking Component Store
Summary:
Seconds executed: 2877
Found 8 errors
CBS Watchlist Package Missing Total count: 2
CBS Watchlist Component Missing Total count: 6
I also found DeepClean.log, which is I believe what Windows did to itself to break WU. It's way too big to paste the content here.
I believe that error 80070002 has nothing to do with temporary update files, because deleting them (part of the WU component reset) doesn't help. I did this several times. I need to somehow restore the missing packages/components listed in the log file.
Where are they normally stored?
Thanks. -
How do you set the duration for multiple stills in iMovie 2013?
How do you set the duration for multiple stills in iMovie 2013?
Before upgrading to the latest version of iMovie last month, I was able to set the duation of all of the stills included in an iMovie project at one time by clicking the apply to all still box in the adjustment pop up. That option is no longer apparent. If it is available I cannot find it, and I have tried several different ways to accomplish it. I have tried the iMovie help section and can find nothing to help.
Apple, do I really have to adjust close to 500 pictures to a 5 second duration individually???
REALLY??!!...why wouldnt people want that level of accuracy when animating, especially when working to music at a specific duration?
Because often people are animating to words or beats in the music. Music is rarely performed with a computer-precise beat and tempo. Musicians aren't robots: they swing the beat sometimes. They use rubato. They change tempo. They change time signatures. As a result, you have to FIND those words and beats. It's not a situation where you can say, "There! I've found the duration of one beat! Now it's easy to find the rest of them!"
If you try it, you will be very disappointed.
Try finding the precise end of a piece of music that fades or ends on a big chord with a ring-out. You'll see that it's trial-and-error: what's the point where it becomes inaudible? It depends on how high your speakers are turned up. You might have them way up, you set an end point for the layer, and then you do a RAM Preview at a more reasonable volume. You might say, "Hey! The music ends before the layer ends!"... but you KNOW you set the layer's out point when the audio file goes silent.
AE has layer markers that can be used on an audio layer to mark beats, words, etc. They come in very handy.
I guess it comes down to this: because AE can do so much different stuff, there are very few automated procedures. Oh, Adobe tries with effects that convert audio levels to keyframes, but they're not 100% reliable... especially on something like a capella choral works. For true accuracy, you need find the timings yourself.
If you want something simpler, try a different application. But be prepared for lower level of accuracy. -
All Network Volumes set as Login Items open in Finder on EVERY startup
...after updating to 10.5.8
I have a Mac running on an otherwise all PC network. Before updating to 10.5.8 I had 5 network volumes set to "connect" on startup automatically (System Prefs / Accounts / Login Items). This worked perfectly and connected to these volumes silently without me having to ever worry about it. I didn't even have to check the "Hide" boxes.
After updating to 10.5.8 however, it became completely annoying. Now it still connects to these volumes, but opens up every single one in Finder upon every startup. That's 5 windows I have to close every time I startup my computer. It may not sound like the worst thing in the world, but mind you I have to log out and back in every day for work. Even checking the "Hide" checkboxes don't do anything.
Anybody experiencing the same problem? Anybody know a workaround or fix? My company has a rather large and complex network so staying connected to certain folders that I use is a must. Thanks.
Screenshots:
Login Items - http://img.photobucket.com/albums/v326/Magick0ne/Other/Login_Items.jpg
Every Startup - http://img.photobucket.com/albums/v326/Magick0ne/Other/Finder_Windows.jpg
Message was edited by: PifmanPifman wrote:
Thanks to both of you. I guess the search I ran wasn't good enough as I didn't find the discussion that you posted.
One of the possible workarounds posted there was to use a third-party program that I found difficult to understand and use. Instead I took V.K.'s advice and made an AppleScript and then made that script launch at login. Works like a charm.
Only difference is that my AppleScript isn't located in the Utilities folder (10.5.8), instead I got to it by going to Applications / AppleScript / Script Editor.
sorry, my mistake on the location.
Then I made a script and saved it as an application. I then put that application in my Login Items (System Prefs / Accounts / Login Items).
If you're having trouble finding the mount volume (or server) address, here's how you can find it: If you are currently connected to the volume(s) that you want to use, left-click it and hit Cmd+I (or right-click, Get Info). Use the address next to "Server:" - That's it!
Hopefully Apple will fix this bug soon so people don't have to make AppleScripts just to make the OS work correctly.
I wouldn't bet on it for leopard. leopard development has stopped now after snow leopard has been released. historically, Apple only releases security patches for old OS versions once a new one comes out. Interestingly, this bug is present in snow leopard too! or maybe they don't consider it a bug and this is how it should work. one can make a case for this, I guess. -
Hello,
My volume settings are not saved when I power-cycle or reset my iMac. I have tried resetting the PRAM, with no effect. In another thread, someone asked me whether my PRAM battery might be getting old; the answer is, probably not, this computer was new as of this January.
One thing that's a little different from my other/previous Macs is that I have a Solid-State Disk (SSD) as startup disk and a standard Hard Drive (HD) for data storage. As recommended by various threads on the subject, to optimize performance while minimizing wear on the SSD, the /Users/xxx directory is on the SSD, but various sub-directories (Desktop, Documents, Downloads, ...) are on the HD. I've noticed that this leads to various odd perturbations (e.g. icons in the Finder sidebar only update when I click on them, can't launch a Parallels virtual machine by double-clicking its icon, ...), but I really don't see how it would be related to my volume settings.
Here's the machine configuration:
iMac (iMac11,3) 27" / 2.93 GHz Intel Core i7 / 16 GB RAM / 251 GB SSD / 2 TB HD
Mac OS X 10.6.8 (10K540)
Boot ROM version: IM112.0057.B00
Any help would be much appreciated!Thanks for the suggestion. The Library folder is on the SSD, and I don't think the Public folder really has anything to do with this. But I did try moving the Desktop folder back to the SSD; the only thing that changed is that the Desktop icon in the Finder window sidebar is drawn correctly. The volume setting behavior is not changed.
I noticed something else, though: when I increase the volume and restart, the reboot chime is louder. This implies that my volume setting is correctly saved to PRAM, but then something else - during the start-up - cranks it back down. Does anyone have any suggestions on how to track this sort of thing? -
BB device deleting calendar entries dispite "Keep Forever" setting on
OK, here's my plight. I am using the latest o/s on my phones (Storm 9530 and a World Edition loaner, each of which exhibit the same problem) and Desktop Manager 5.0.1. I only perform "wired" syncs using the USB cord (I am NOT syncing wirelessly and I am not on an Enterprise Server). When trying to sync with Outlook 2007, my phone wants to delete hundreds of calendar items that I want to keep. When I cancel out of the sync, and check my phone, the items tagged for deletion are indeed already gone on the phone. All the posts that I have seen on this issue claim that "older" calendar items are being deleted by the user's phone, but mine seem to be indescriminate, in that some are old and some are quite recent. There doesn't seem to be any logic regarding which are chosen for deletion and which aren't. I've checked, and this doesn't seem to be a Memory Manager issue, as I have lots of room in my memory. I have my Keep Appointments setting set to "Keep Forever." My provider (Bell Mobility) is of little help on the issue, and conveniently claim that it is a data corruption problem. If that is true, wouldn't the problem occur consistently, on every sync? My problem seems to go away for days or weeks at a time, then pops up whenever, for whatever reason. Is anybody else experiencing this, and if so, any advice? Help!!!
Yep.. just happened for the several'th time to me also. I also am requesting BB support to identify the issue and rectify it please.. been around for a very long time from what I can see in the various forums.
BB support... please respond so we all can get this working.. Very frustrating to have to keep restoring my calendar.. very time consuming..
Just went through the process once again. It drops repeats though.. bit of a nuisance..
I ensure I regularly back up OUTLOOK calendar to comma DOS csv so I have it just in case.TIP.. ** Watch your Dates To Backup settings on the way through the wizard. Remember that what you put in the backup will be what BB will restore.. I went from 94 deleted to 243 added.. a tad excessive, but BB should clear 60 day stuff I think...
** make sure you haven't stored any calendar items on BB without duping to Outlook .. If there are, make sure you have written them down or something.. maybe write them up in OUTLOOK BEFORE you do the backup.. I ensure I have as few as possible entries only in for just this sort of situation**
Then clear the calendar on the BB..
Then restore your OUTLOOK calendar.
Then sync BB and it will pick up the entries you just restored.
I'm probably just sprouting info I have picked up from several forums, but it works for me. -
The "save as" window keeps popping up randomingly while browsing, WHY?
Literally every few minutes the pop-up asking to "save as" and it just keeps popping up to save the web page. There is nothing wrong with my ctrl and S button on my key board and I cannot figure out why the save as window keeps popping up. I've done a virus scan and there is no negative results. What's the next logic troubleshooting step?
Does it affect some sites more than others?
If you use the Foxit PDF viewer and have PDFs configured to save to disk, maybe it's related to this problem: [https://support.mozilla.org/en-US/questions/927458 Foxit Reader spews a lot "not a PDF" on some pages].
One standard diagnostic step is to try Firefox's Safe Mode to see whether the misbehavior is caused by a custom setting or add-on.
First, I recommend backing up your Firefox settings in case something goes wrong. See [https://support.mozilla.org/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
Next, restart Firefox in [http://support.mozilla.org/kb/Safe+Mode Safe Mode] using
Help > Restart with Add-ons Disabled
In the Safe Mode dialog, do not check any boxes, just click "Continue in Safe Mode."
If the annoying messages go away, this points to an add-on or custom setting as the problem. Now the challenge is to track it down! -
where did this backup window come from on my desktop. It specifies personal data & settings and tells me when the next backup is scheduled [which I never set up]. I have always used time machine to backup to an external disc and within the last 2 weeks, this backup window keeps appearing. Where did it come from? Thanks for any help
To check your S.M.A.R.T status open disk utility and click on your drive and then click on the info icon.
Maybe you are looking for
-
I would like to know how i can create a bell graph with out using sub VIs, the data that i created consists in 500 readings with values of 0 to 100, i calculated the mean value and standard diviation. I hope some one can help me
-
When going to youtube.com in it's own tab, every video comes on to play for a few seconds and is halted with no way to play the entire video again. I can watch a youtube video in facebook but it too is kept from streaming smoothly. When editing my ph
-
Excused I I am one of that he has installed and bought Seen Windows in order to improve my PC, but unfortunately instead improving are found again to me with my Micro unusable Zen that is x do not succeed to find i driver to make to work it. I would
-
Adobe Support cannot update my credit card
I have a 6 person team on a CC account. We moved our shop to a new location and had to update our billing information. Your support team in India cannot update my Credit Card information. I called as soon as I got the message through CC that there wa
-
Hi I am facing some pecular problem at my client side.I have a servlet which is making redirecting to other servlet(named download servlet).This redirect occurs when you are downloading any file from server .