Ошибка аутентификации PDP

Не могу войти в мобильный интернет, всё подключено, но пишет: "ОШИБКА АУТЕНТИФИКАЦИИ PDP". Что делать?

hello, you could try resetting the file in your firefox profile that holds the certificate information, maybe it has become corrupted.
therefore go to ''firefox > help > troubleshooting information'', click on ''profile folder/show folder'' and close all firefox windows afterwards. a windows explorer window should open up - in there rename or delete the file named '''cert8.db''' (& '''cert_override.txt''' in case it is present) - it will be regenerated again the next time you launch the browser.

Similar Messages

  • How to connect apple tv 2 to pioneer pdp s35

    How do I connect apple tv 2 to pioneer pdp.s35 tv? I connected to one of my pioneer receiver's hdmi ports but when I cycle through the inputs I can't find apple tv.  Thanks.

    Welcome to the Apple Community.
    I don't have or indeed know anything about your receiver, but unless the Apple TV can see an active device and connect via HDMI it won't turn on. You will need to set your receiver to use the correct input and then turn on the Apple TV.

  • How to Resolve a PDP authentication error on iPad mini

    What do I do if I get a PDP authentication failed error when I try to access data?

    Same issue.  Sitting here in Europe (Germany) trying to do some work.  From the Support technical discussions, there are numerous complaints like this.  Went by T-Mobile twiice already; they point the finger at Apple.   (I'm sure I could call back to the USA and sit on hold for an hour, with most likely Apple blaming the telco's.)  Not very impressed to say the least.  Wonder how Android is doing in this regard ...........?

  • DE PDP-1 binary file from Java

    Can someone here help me, please!?
    Anyone know how to convert a Java class file into a binary file that will run natively on my Digital PDP-1 computer? I just spent over $120,000 for it! Thanks.
    This resurrected thread was first posted November 25, 1960 at 8:25AM
    -------------------------------------------------------------------------

    This resurrected thread was first posted November 25,
    1960 at 8:25AMIn what time zone?

  • HI, Im using Iphone 4 and i recently got my IOS updated to IOS7 and  now im getting the error message as "PDP authentication failure" Im using Aircel carrier.

    HI, Im using Iphone 4 and i recently got my IOS updated to IOS7 and  now im getting the error message as "PDP authentication failure" Im using Aircel carrier.
    Please let me know how to fix this issue

    update...
    I am not one to give up. So I called AT&T today. Now they are telling me they canceled my order because they were unable to fulfill my order. Basically, AT&T told me they sold out so they canceled my order so I can proceed to reorder again. It took them 4 days to realize this. I will be lucky if I get a new phone by Christmas. I am sure they will find a way to cancel my order again.
    Again, I argued, how is this my fault. I placed my order at the store around 11 a.m. Pacific time. My friend ordered his phone online sometime after me. He got his but my order was canceled. AT&T tried to explain to me that they sold over 600,000 phones, almost 500 per minute during there peak. Again, I asked, how this was my fault.
    I can understand over selling the phone. It is a great product. There is no reason to cancel my order. You adjust my order and tell me you will let me know when my phone will be in. I would have been mad that my phone was going to be late but I would have survived. At least I would be getting one.
    At this point, I have no order and AT&T or Apple website will allow me to order one. I just want to get in the QUEUE for one.
    Frustrated.

  • PDP connection error when not on wi-fi

    This has probably been asked elsewhere so sorry in advance if it has!! Since leaving the house this morning (I use wifi at home) I've had "no network connection" even though I have full 3G signal! I've tried the hard reset & reset from the settings, I've turned my
    mobile data off & back on again but nothing's changed, checked with my network provider (EE) who said its not my network and
    to go to the apple store which I have but they can't see me until tomorrow. I have seen other people post about this on here but in there case the hard reset seems
    to have resolved it but this isn't working for me! It's also coming up with the pdp connection error message when using safari.
    Thank you in advance! Nikki.

    Hi Fordyy88,
    I'm sorry you are having issues connecting to the internet through your 3G network.
    It appears from the error message that the issue is with your Carrier. See below:
    iOS: Error message when trying to use a custom Access Point Name (APN)
    Symptoms
    When activating 3G service on an iOS device using a custom Access Point Name (APN), the error message "Could not activate cellular data network: PDP authentication failure" may appear.
    Below are troubleshooting steps you can try on your own before seeing the Genius tomorrow:
    iPhone: Troubleshooting a cellular data connection
    Symptoms
    This article will help you troubleshoot the following cellular data issues on your iPhone:
    No connection over cellular network, but works over Wi-Fi
    Resolution
    Follow the instructions below for assistance with troubleshooting cellular data issues on your iPhone. After performing each step, please test to see if the issue is resolved.
    Toggle airplane mode: Tap Settings, turn airplane mode on, wait three seconds, and then turn off again.
    Restart your iPhone.
    Ensure that your software is up to date:
    Check for a Carrier Settings Update. Tap Settings > General > About.
    Check for an iOS Software Update. Tap Settings > General > Software Update.
    Note: Some updates may require a Wi-Fi connection.
    Remove the SIM Card and reinsert it. Allow the iPhone to acquire the network again.
    If your SIM card has SIM PIN enabled, try toggling it off: Tap Settings > Phone > SIM PIN.
    Try another location. If a different location works, but the original location still does not, contact your carrier to report the issue.
    Reset network settings: Tap Settings > General > Reset > Reset Network Settings.
    Restore the iPhone as new.
    Contact your carrier to:
    Verify that the iPhone is properly set up on the account with the appropriate, current data plan.
    Verify that there are no account-related blocks.
    Find out if there are specific error messages in the carrier logs that could help determine why the issue is occurring.
    If none of the above steps resolves the issue, contact your carrier, make an appointment at an Apple Retail Store, o rcontact AppleCare to troubleshoot further.
    I hope you are back on track soon!
    - Judy

  • How to solve the error message "Could not activate cellular data network: PDP authentication failure"when using 3g or gPRS on safari with an iphone 4 and latest software updates

    Please can someone help me to solve the error message "Could not activate cellular data network: PDP authentication failure"when using 3G or GPRS on safari with an iphone 4GS and latest software updates. I have tried resetting the network and phone settings. I have restored the factory settings on itunes and still the problem persists.

    All iPhones sold in Japan are sold carrier locked and cannot be officially unlocked by the carrier. If you unlocked it, it was by unauthorized means (hacked), and support cannot be given to you in this forum.
    Hacked iPhones are subject to countermeasures by Apple, particularly when updating the firmware. It is likely permanently re-locked or permanently disabled.
    Message was edited by: modular747

  • PDP Error for only for Service Item

    Hi Guys,
    We are on SRM 5.5 with ECC6.0 in Classic Mode and trying to create a PO in ECC.
    We are facing a unique issue. We have maintained all the required settings for material as well as
    services. When a material is transferred to SoCo and assigned a vendor it creats a PO in ECC. But when we are transferring service, the PO does not get created.
    The error in RZ20 (backend error) shows error "Enter Material Group" although material group is present in the SC and replicated from ECC to SRM and can be seen in Comm_hierarchy
    Issue is unique coz of following results.
    1. ECC PR - Free Text Item -> acc *** cat - k -> P grp 200 -> Material Grp X ->
        Item Cat D -
        PR sent to SRM to SOCO and create PO FAILS
    2. ECC PR - Free Text Item -> acc *** cat - k -> P grp 200 -> Material Grp X ->
        Item Cat "Blank" -
        PR sent to SRM to SOCO and create PO SUCCESS
    3. SRM SHC - Free Text Item -> acc *** cat - k -> P grp 200 -> Material Grp X ->
        Item Cat D -
        PR sent to SRM to SOCO and create PO SUCCESS
    Hence for the same set of data the Material PR creates a PO but Not Service. Also for the same service data the SRM SHC also creates a PO.
    Only the PDP service PR fails. Any views why? is there any specific settings for Service in PDP?
    We have replicated the masters and groups properly.
    Thanks & Regards

    Hi Experts,
    I have noticed the following difference when the ext req for Material (which creates PO) and Service (which fails) are compared in BBP PD
    1. The field EXT_DEM_POSID (External Requirement Tracking Number) in Table BBP_PDIGP for service shows the value as 000100000000010 whereas for material it shows value  00010. That means the details in SOCO under follow on documents tab shows external requirement number for service as xxxxxxxxx/1000000 (probably last 5 digits truncated) wheras for material it shows xxxxxxxxx/10.
    Is this standard or this is an error. Can this be linked to my original issue.
    2. The field BE_OBJ_ITEM in table BBP_PDBEI for the failed service PO is blank whaereas for material it takes the value 00010.
    What is the importance of this field?
    Apart from this I have also found a note in which corrections are delivered for SRM 550 patch level 11 which is our current patch level. That means these corrections are already present in our system. The program code says.
    reference to BE purchase requistion
      IF is_item-ext_demid IS NOT INITIAL AND
        is_item-ext_dem_posid IS NOT INITIAL.
        mc_assign_x ls_be_item preq_no    is_item-ext_demid.
        mc_assign_x ls_be_item preq_item  is_item-ext_dem_posid(5).
      when service item, remove mat_grp in extreq scenario
        because it can differ from original purch. req. item
        IF is_item-product_type = c_ptype_service.
          CLEAR ls_be_item-matl_group.
        ENDIF.
    This clearly says when service item, remove mat_grp in extreq scenario and that is what our problem is. The error is basically for "Enter material Group".
    Kindly let me know whats your opinion or resolution.
    Thanks
    Hussain

  • How to solve this problem? '' can not activate cellular data network failure'' authenticating PDP  from already thank you

    how to solve this problem? '' can not activate cellular data network failure'' authenticating PDP  from already thank you

    What does this have to do with using an iPhone in an enterprise environment?
    What carrier are you using and where did you get the phone?

  • Best Practice for Using Static Data in PDPs or Project Plan

    Hi There,
    I want to make custom reports using PDPs & Project Plan data.
    What is the Best Practice for using "Static/Random Data" (which is not available in MS Project 2013 columns) in PDPs & MS Project 2013?
    Should I add that data in Custom Field (in MS Project 2013) or make PDPs?
    Thanks,
    EPM Consultant
    Noman Sohail

    Hi Dale,
    I have a Project Level custom field "Supervisor Name" that is used for Project Information.
    For the purpose of viewing that "Project Level custom field Data" in
    Project views , I have made Task Level custom field
    "SupName" and used Formula:
    [SupName] = [Supervisor Name]
    That shows Supervisor Name in Schedule.aspx
    ============
    Question: I want that Project Level custom field "Supervisor Name" in
    My Work views (Tasks.aspx).
    The field is enabled in Task.aspx BUT Data is not present / blank column.
    How can I get the data in "My Work views" ?
    Noman Sohail

  • PR to SC -PDP

    Hi
    sometimes queues failed while transfering PR to SC in PDP scenario,
    how we can find out what item in the PR has a defect . I do have LUW information.
    can any one guide how to read the failed item in the queue.
    Objective:- I wanted to know which item PR has bad data . I can see the PR in the failed queue.
    i am findiling difficulty if the item has more than 100 PR . which item has bad data ..
    any DOCUEMNTS TO GUIDE HOW TO READ THE FAILED QUEUES.
    will i get any clue on SLG1 about the PR line item for quick action. as you aware all following queues will be held . i want to take fast action.
    Pedro /tim:- any thoughts?
    Justin:- you might have good idea. i
    muthu

    Hi Pedro
    Indeed will i get line item of PR in the SLG1?
    i may get material number only or specific error like enter name or enter contract number.
    so it is diffilcult for me trace line item number .
    Mathew/ all:- can you try this question please?
    Muthu

  • How to decide the Purchasing ORG in SC in the standard SRM PDP scenairo

    Dear ,Experts :
      I work in SRM 7.0 and PDP scenairo .
      I create one PR in MM and run the report to send the PR to SRM system , In SRM system ,the SC will automatic generate .In the BBP_PD ,I can find the  Proc_Org and Proc_Group in the Organizations. In my opinion ,when create the Sc ,the system will find the responsible purchasing group and the purchasing group .If  there are many Purchasing groups found  ,the system will assign it to the first purchasing group and its PORG.
       on the other way ,you should maintan the CHANNEL unit in the purchasing group responsbility .
      Right ?
      BESTREGARDS
    Alex

    Hi Alex,
    You are right. You need to assign the responsibility of entry channel to the local purchasing group. Also coming to your first question, usually for PDP scenario, we create one local purch org and purch grp as these local structures will be responsible for all external procurement.
    PS: Make sure your RFC user is created under the entry channel. System will create SC through this RFC user.
    Regards,
    Nikhil

  • In PDP cycle is it possible to pull back transfered PR (from SRM to ECC)?

    Dear Friends,
    We are working on PDP cycle where backend ECC Purchase Requisition is transferred to SRM client via program BBP_EXTREQ_TRANSFER so that the procurement activity is carried out in SRM.
    Now business decides to discontinue the procurement activity from SRM and continue in R/3 only. Which mean business would like to create Purchase Order in R/3 with reference to PR.
    So we delete the shopping cart created in SRM and tried to change the Purchasing group so that system removed the procurement profile tag from PR. But system does not allow.
    My question is, is it possible to pull back the PR from SRM to ECC after it has been transferred to SRM? 
    Or in standard process there is no provision to reverse the situation after a PR is transferred from ECC to SRM.
    Can anyone through some light on this?
    Regards,
    Sandeep Parab

    Hi Sandeep,
    by standard there is no option to send Reqs back to ECC. A moved Req is
    blocked in ECC with a flag in EBAN, that sourcing is carried out externally. This
    block is removed, when the PO is created. I implemented a push back mechanism
    with an extra button in the sourcing cockpit within a classic environment. The
    button first takes the SC information and identifies the Req in ECC, sets the
    status on blank and releases the Req for sourcing. Finally the SC is deleted from
    the sourcing cockpit. With a good programmer the story can be quickly done.
    Cheers,
    Claudia
    Please reward points for useful answers.

  • PDP transferred PR not able to see in the sourcing cockpit

    Hi SRM gurus,
    We have created a PDP requirement from the backend and our prog BBP_EXTREQ_TRANSFER  manually it shows that one PR is transferred.
    But our "Carryout Sourcing" is not showing any PR's thru. find list.
    Can anyone help where else we could search for the PR's in EBP.
    We are working in SRM 4.0 Component version.
    Reg.,
    Ravi

    Hi Ravi,
    1.Check your RFC User Authorization role to whom you have assigned to Channel in the Org structure in SRM.
    2. In the Sourcing for product categories in IMG Customizing what you have defined for the specific product category.
    3.Have you defined all the respective customizing in SRM for bringing the PR in to SRM From ERP?
    4.Check note 656597 for further reference.
    5.Check SMQ1 and SMQ2 transactions.
    with regards,
    mahesh

  • Schedule pdp page blank with no Security Alert

    Hi,
    in all projects, in the Schedule Page i have only a blank pdp page (i didn't edit the page) and i had the test with a User in the group Administrator (also there aren't permission alert).
    Can you suggest me something to fix this issue?

    This is the log about the issue i think:
    Daniele, ClaimsCount=26 264c689c-436f-e0c5-e41f-37818f1dbe71
    01/08/2014 17:00:40.70  w3wp.exe (0x1544)                        0x0300 SharePoint Foundation         
    Files                          00000 High     UserAgent not available, file operations may not be optimized.   
    at Microsoft.SharePoint.SPFileStreamManager.CreateCobaltStreamContainer(SPFileStreamStore spfs, ILockBytes ilb, Boolean copyOnFirstWrite, Boolean disposeIlb)     at Microsoft.SharePoint.SPFileStreamManager.SetInputLockBytes(SPFileInfo&
    fileInfo, SqlSession session, PrefetchResult prefetchResult)     at Microsoft.SharePoint.CoordinatedStreamBuffer.SPCoordinatedStreamBufferFactory.CreateFromDocumentRowset(Guid databaseId, SqlSession session, SPFileStreamManager spfstm,
    Object[] metadataRow, SPRowset contentRowset, SPDocumentBindRequest& dbreq, SPDocumentBindResults& dbres)     at Microsoft.SharePoint.SPSqlClient.GetDocumentContentRow(Int32 rowOrd, Object ospFileStmMgr, SPDocumentBindRequest&
    dbreq, SPDocumentBindResults& dbres... 264c689c-436f-e0c5-e41f-37818f1dbe71
    01/08/2014 17:00:40.70* w3wp.exe (0x1544)                        0x0300 SharePoint Foundation         
    Files                          00000 High     ...)     at Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String
    bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean&
    pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object&
    pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel,
    UInt64& ppermMask, ... 264c689c-436f-e0c5-e41f-37818f1dbe71
    01/08/2014 17:00:40.70* w3wp.exe (0x1544)                        0x0300 SharePoint Foundation         
    Files                          00000 High     ...Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies,
    Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId)     at Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte
    bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument,
    Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object& pvarMetaData, Object&
    pvarMultipleMeetingDoclibRootFolders, String& pbst... 264c689c-436f-e0c5-e41f-37818f1dbe71
    01/08/2014 17:00:40.70* w3wp.exe (0x1544)                        0x0300 SharePoint Foundation         
    Files                          00000 High     ...rRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId,
    UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String&
    pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId)     at Microsoft.SharePoint.Library.SPRequest.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl,
    Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String&
    pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion,... 264c689c-436f-e0c5-e41f-37818f1dbe71
    01/08/2014 17:00:40.70* w3wp.exe (0x1544)                        0x0300 SharePoint Foundation         
    Files                          00000 High     ... String& pbstrTimeLastModified, String& pbstrContent,
    UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied,
    Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId)    
    at Microsoft.SharePoint.SPWeb.GetWebPartPageContent(Uri pageUrl, Int32 pageVersion, PageView requestedView, HttpContext context, Boolean forRender, Boolean includeHidden, Boolean mainFileRequest, Boolean fetchDependencyInformation, Boolean& ghostedPage,
    String& siteRoot, Guid& siteId, Int64& bytes, ... 264c689c-436f-e0c5-e41f-37818f1dbe71
    01/08/2014 17:00:40.70* w3wp.exe (0x1544)                        0x0300 SharePoint Foundation         
    Files                          00000 High     ...Guid& docId, UInt32& docVersion, String& timeLastModified,
    Byte& level, Object& buildDependencySetData, UInt32& dependencyCount, Object& buildDependencies, SPWebPartCollectionInitialState& initialState, Object& oMultipleMeetingDoclibRootFolders, String& redirectUrl, Boolean& ObjectIsList,
    Guid& listId)     at Microsoft.SharePoint.ApplicationRuntime.SPRequestModuleData.FetchWebPartPageInformationForInit(HttpContext context, SPWeb spweb, Boolean mainFileRequest, String path, Boolean impersonate, Boolean& isAppWeb,
    Boolean& fGhostedPage, Guid& docId, UInt32& docVersion, String& timeLastModified, SPFileLevel& spLevel, String& masterPageUrl, String& customMasterPageUrl, String& webUrl, String& siteUrl, Guid& siteId, Object& buildDependencySetData,
    SPWebPartCollectionInitialState& initialState, ... 264c689c-436f-e0c5-e41f-37818f1dbe71
    01/08/2014 17:00:40.70* w3wp.exe (0x1544)                        0x0300 SharePoint Foundation         
    Files                          00000 High     ...String& siteRoot, String& redirectUrl, Object& oMultipleMeetingDoclibRootFolders,
    Boolean& objectIsList, Guid& listId, Int64& bytes)     at Microsoft.SharePoint.ApplicationRuntime.SPRequestModuleData.GetFileForRequest(HttpContext context, SPWeb web, Boolean exclusion, String virtualPath)    
    at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.InitContextWeb(HttpContext context, SPWeb web)     at Microsoft.SharePoint.WebControls.SPControl.SPWebEnsureSPControl(HttpContext context)     at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.GetContextWeb(HttpContext
    context)     at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.PostResolveRequestCacheHandler(Object oSender, EventArgs ea)     at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IEx...
    264c689c-436f-e0c5-e41f-37818f1dbe71
    01/08/2014 17:00:40.70* w3wp.exe (0x1544)                        0x0300 SharePoint Foundation         
    Files                          00000 High     ...ecutionStep.Execute()     at System.Web.HttpApplication.ExecuteStep(IExecutionStep
    step, Boolean& completedSynchronously)     at System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error)     at System.Web..
    Can this help?

Maybe you are looking for