Other mailboxes with full permission does not appear in Outlook

There are 3 users - A, B and C
User C has full permission on A's and B's mailbox.
When 'C' accesses Outlook on wifi network, all three mailboxes appear in Outlook but when 'C' accesses Outlook on a broadband (different network), only C's mailbox appear.
It sounds like some network related problem but any help will be highly appreciated.
Exchange 2010 SP2 and Outlook 2010

Hi,
Agreed. To narrow down the issue, I recommend you troubleshoot the autodiscover service first.
Here is a related article for your reference, please refer to the "Troubleshooting Mailbox Auto-Mapping : Autodiscover" section to troubleshoot the autodiscover service.
Mailbox Auto-Mapping in Exchange Server 2010 (Part 1)
http://www.msexchange.org/articles-tutorials/exchange-server-2010/management-administration/mailbox-auto-mapping-exchange-server-2010-part1.html
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Similar Messages

  • Events "full day" does not appear in Notification Center

    hello,
    Events " full day " does not appear in Notification Center on my iPhone 6 If I add an event at a specific time today , this event is displayed. Otherwise , the part calendar ( on today's page ) show " no events " even if there is one or more events " full day " .
    iOS bug or wrong setting on my part ?

    With the previous version of Lync if you loaded Lync, powered off, back on, loaded Lync it would appear in notification centre. But this doesn't seem to work now.
    However, as I mention other colleagues with the same phone, IOS version etc do work.

  • Downloaded Acrobat Assistant but the window with language option does not appear and Acrobat Pro II free trial does not download. Why?

    Downloaded Acrobat Assistant but the window with language option does not appear and Acrobat Pro II free trial does not download. I have signed in successfully. Why?

    Hi irenedix,
    After Adobe Download Assistant is installed, you can start it at any time and select a product to download at the bottom of the window. The list updates as new products become available to download with the Adobe Download Assistant.
    Please refer : http://helpx.adobe.com/x-productkb/policy-pricing/download-assistant-faq.html#main_How_do_ I_download_a_trial_version_of_Creative_Suite_or_Elements_software_
    Alternatively you can try downloading it from the direct download links available at: http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html
    Regards,
    Rave

  • When I try to email a picture the space to type a comment with the picture does not appear

    When I try to email a picture with a message, the space to type a message does not appear. Why?

    If you get no response after starting 6 threads on an issue, it's worth looking at question you are asking over and over. Perhaps you need to re-think it. Perhaps you need to give more details - how you're emailing, with what apps, a fuller description of the issue and perhaps even a screenshot, anything that might help other people understand what you're asking.
    Regards
    TD

  • When I long hold a doc open with adobe reader does not appear

    When I long tap on a doc to open ; open with adobe reader does not appear

    Which app did you start with?  Apple Mail, Safari, iBooks or something else?
    Is a PDF document already open in other app?  If so, you can tap the PDF document to display a toolbar in the app.  Do you see the icon like this in the toolbar?
    You can tap the icon to open a popup then tap "Open in..." or "Open in Adobe Reader".  You may need to scroll to the right to find the red icon with "Open in Adobe Reader".
    In Safari, tap "Open in..." (blue text) in the top toolbar, instead.
    If you see something else on the screen, please let us know the name of the app.

  • IBook created with iBooks Author does not appear on iPhone

    Hi,
    My daughter created and published a book using iBooks Author but it only shows up in the iPad and Mac version of iBooks.
    Is there a way to get it to work on the iPhone iBooks store as well?
    Thank you for your courage.

    I found the answer here. I guess I just didn't dig long enough!
    The short answer is that iBooks Author does not output a format that supports iPhone. Use Pages to generate an ePub file that supports iPhone, etc.
    See details in the following link:
    iBooks Author & iPhone

  • Problem with Calendar and drag and drop a name to a Time spot with palm desktop. Full name does not appear only last name.

    Im having a problem with the palm desktop. When in “Contacts” and I list (LastName,First name) and then I move to the Calendar and drag and drop a name to a Time spot Only the LAST name of the Person appears. How can I fix this so that I can see there full name ?
    Also when If list (Company,Last Name) then go to calendar Some of my contacts are out of order but if I drag and drop them into the calendar day the full name appears. Is there any why of fixing this ? Or having it work properly ?
    Im running  XP pro
    Palm Desktop Version 4.1.4
    Post relates to: Treo 680 (Rogers)
    Message Edited by corrado on 07-21-2008 08:55 AM

    Any Idea how to fix the problem that I am getting when using the (Company,Last Name) and the contacts being out of order in the calander ? I have some last names starting with A then it goes to D then a B then a stack more A and none of then have a Company field filled out in them in them...
    Thanks for looking into that for me but it seems really stange to offer the option but not put in the first name in the calander when you drage the name over. I hope this is fixed in the future. Can anyony sugest another desktop platform I can use if I cant fix my problem with the   (Company,Last Name) problem?
    Post relates to: Treo 680 (Rogers)

  • Silent install with WEB_JAVA_SECURITY_LEVEL=H does not appear to work

    Oops - posted this in the wrong category after I landed there as a result of a search...
    I have tried to install the jre-7u10-windows-i586.exe with flags: /s WEB_JAVA=1 WEB_JAVA_SECURITY_LEVEL=H but after it is installed, when opening the control panel, the web security level is set to Medium.
    This can also be changed by a normal user. The setting is saved in the CURRENT_USER part of the registry. There appears to be no similar entry in LOCAL_MACHINE.
    I would have expected when the installer option has been used (as admin), the setting would be HIGH for all users and the user would not be able to change it.
    What is the problem?
    OS is Windows XP with all patches.

    I understand why you asked the question: It doesn't appear to be working as designed. ;)
    I offered up what little I know in hopes of helping you solve the immediate problem of applying that setting. I wasn't trying to dance around the problem. :)
    You are correct: it is a per-user setting. There are still a number of ways of getting per-user settings that out there:
    - Via login script, as you suggested;
    - Via GPO - Push the registry key(s) in this example;
    - Via installs - add the registry key as part of the installation to HKCU; for any new user profiles: load the default user hive, add the key there & unload the hive. New profiles from that point on will be updated. You'll still need to do something for existing profiles. (Use one of the two options above for that.)
    You added a new twist on this by mentioning a new element: the ability to lock the setting(s) so that users cannot change them. You'll likely need to leverage deployment configuration files to accomplish this. I don't think registry keys apply here, but I could be mistaken. Once the 'master' files are configured properly, they can be deployed via GPO, login script and even new installs.
    Take a look at the documentation here, and if you still require some assistance, check back in.
    http://docs.oracle.com/javase/7/docs/technotes/guides/deployment/deployment-guide/properties.html
    The issue hasn't really 'solved itself' since users can still change the security level. The above will address that.

  • Respond with text message does not appear when phone locked.

    Hi,
    I have an iPhone 5S and have a very strange glitch that I am unable to overcome.  Basically, when my phone is locked, I do not get the option to respond with text, I only get the "remind me later" option.  When my phone is unlocked, however, the option is there.  It is very strange and I cannot figure out why.
    For the record, I also had the exact same probelm on the iPhone 5, in both IOS6 and when I upgraded to IOS7.
    Would appreciate any help with this.  Thanks.

    The lack of a "reply with message" at the lock screen in ios7 has been frustrating; I appreciate finally getting pointed in the right direction.
    A minor update for ios7.1.1 with iPhone 5s (perhaps specific to devices with Touch ID): for me setting what shows up in the Lock Screen is in Settings App > Touch ID and Passcode.

  • Adobe Reader does not appear as a choice when I click on a PDF in email

    When I open an email that has a PDF, then I click on the "Open With", Adobe Reader does not appear as a choice. I use an IPhone 4S.

    Is your phone updated to iOS6?
    When I press on the PDF icon at the bottom of an email message on the iPhone, I get a screen which shows "Open in Adobe Reader" along with icons of other readers I have installed which read PDF files.
    Looks like this:

  • Service entry sheet does not appear in PO history

    hello all
    here is a difficult question:
    standard PO (type NB) with one Item line.
    we did several GR on this PO, several entry sheets.
    The last SES, with "final entry", does not appear in the PO history.
    the GR corresponding to it, does appear.
    any idea of what could have happened?
    thanks
    Alisa

    HI,
    whenever we do the SES against the PO,
    two entries trigger in PO history,
    one is SES and other is material document type withmvt 101,
    ur saying that material document is there in ur case and SES is not there,
    after posting the SES entries will update at EKBE ,ESSR and ESLL,
    there is a way to track the SES by by comparing the tables EKBE and ESLL ( service line objects ),
    u can trace through package no of services,
    if the pocket no is 101 at EKBE, immediate pocket no is 102 at update at ESLL,
    check the pockets in both tables,
    may be this will cause through patch level,
    ask the BASIS team about this.
    lakshmi reddy
    Edited by: lakshmi reddy on Apr 27, 2010 5:13 PM

  • Sync calendar entries not appearing in outlook 2010

    Hi there,
    I'd be grateful for any help on this one as I'm just bout pulling my hair out.
    Basically, when I sync calendars on my iPad 3 using iTunes, the entries do not appear anywhere in Outlook 2010 which is my default mail/calendar client.
    My setup is as follows:
    I have iCloud enabled on my iPad, but for some reason I have some of my calendar entries on the iCloud calendar and some on the calendar on the iPad itself.  I thought the easiest way to sort everything out would be to get the entries stored on the iPad onto my PC, then I could easily copy them into iCloud using Outlook.
    Within Outlook I have a number of calendars under the main Calendar folder shown in the navigation pane.  Some of these calendars are also on the iPad.
    As I had multiple calendars with the same name 'Calendar', I thought it would make things easier if I renamed the calendars on the device.  In this case, I renamed the calendar which has the entries I want on my PC to Calendar1.  When I sync with iTunes and select Calendar1 to be synced, this does not appear in Outlook.  Even if I create an empty Calendar1 in Outlook, the entries are still not being copied over.
    I'm running Windows 7 64-Bit, iTunes 11 and iOS 6.12.  I have changed the backup option in iTunes to use my computer instead of iCloud.  This made no difference.
    Any help would be much appreciated.
    Hussein.

    Hi there,
    As a follow up to the previous post I disabled iCloud and opted to keep all items on my iPad thinking that I'd rather have too much data than too litt.e  I then did an iTunes sync which replicated a lot of data in Outlook, but the renamed calendar still isn't being synced over or the entries that have been added to it.  I put in a test entry on the iPad and it's going into the renamed calendar1 but not showing up in Outlook.
    Any further tips.  I've tried installing OpenSSL as advised on another Apple support KB article but this has no effect.
    Thanks for any advice on this.
    All the best for now and take care.
    Hussein.

  • HT201317 Has anybody an idea, why my jpeg-picture uploaded to Photo Stream does not appear on my S4 like all the other pictures before? Ok, it's 4 years old, but JPEG and taken with a digital camera...! I'm despaired after trying since days...! Thank you!

    Has anybody any idea, why my jpeg-picture upoaded to Photo Stream does not appear on my iPhone S4 like all the other pictures before?
    Ok, it's a 4 year old picture, but taken with a digital camera as jpeg...! This cannot be the problem really, but I'm despaired after trying since days...! Thank you all for any hint you've got for me!

    If you asking me, I would suggest to additonally use a second storage service which also allows you to store your pictures over the 30 days period. I personally use Dropbox with automatic upload for that (https://db.tt/cMEgDUFZ), but there are also other storage services like Flickr for example.

  • Sent mail does not appear in sent mailbox after sending

    Sent mail does not appear in sent mailbox after sending

    From reports on this site, Yahoo mail doesn't work reliably with Mail. The following steps may help.
    Quit Mail. Force quit if necessary.
    Back up all data. That means you know you can restore the Mail database, no matter what happens.
    Triple-click the line below on this page to select it:
    ~/Library/Mail/V2/MailData/Envelope Index
    Copy the selected text to the Clipboard (command-C). In the Finder, select
    Go ▹ Go to Folder
    from the menu bar. Paste into the box that opens (command-V), then press return.
    A Finder window will open with a file selected. Move the selected file to the Desktop, leaving the window open. Other files in the folder may have names that begin with "Envelope Index". Move those files, if any, to the Trash.
    Log out and log back in. Relaunch Mail. It should prompt you to re-import your messages. You may get a warning that the index is corrupt and that Mail has to quit. Click OK.
    Test. If Mail now works as expected, you can delete the file you moved to the Desktop. Otherwise, post your results.

  • HT4623 The SIM card inserted in this iPhone does not appear to be supported. Only compatible SIM cards from a supported Carrier may be used to activate iPhone. Please insert the SIM card that came with your iPhone or visit a supported Carrier's store to r

    The SIM card inserted in this iPhone does not appear to be supported.
    Only compatible SIM cards from a supported Carrier may be used to activate iPhone. Please insert the SIM card that came with your iPhone or visit a supported Carrier's store to receive a replacement SIM card.

    I got the same message.
    I bought an iPhone 5 at full retail price from an AT&T store. I requested the phone to be unlocked through their unlock portal. The AT&T unlock system asked for the IMEI number, a copy of my receipt showing that I bougth the phone at "No Commitment" price. A few hours later I received a message from AT&T stating that the unlock request was approved. I then followed the instructions to back up the phone and restore it through Itunes. The phone activates normally with the AT&T SIM card. But when I insert my VODAFONE SIM I get the massage "THE SIM CARD... etc.
    I tried again to back up & restore the phone 3 or 4 times, no success. I have also allowed 24 hours for the unlock process to complete. Still no luck.
    I have checked again on the AT&T Unlock Status portal and it shows "Unlock approved".
    Where is the issue here? Do I have to call Apple or return the phone to AT&T and get the unlocked phone through the Apple Store?
    Thanks for any help on this.

Maybe you are looking for