Outlook in Office 2007 stopped receiving email after April 2014 update installed

After installing the Office 2007 updates for April 2014 yesterday, I stopped receiving email.   Email is still going to our server (where I can read it), but is not being delivered to my Outlook account.
Anyone else with this problem?  Solutions?
Thanks.

Try u-installing Office and re-installing.
Office 2011 Removal
Office 2011 Removal (2)

Similar Messages

  • Exchange server 2007 stop receiving emails

    i have a strange issue with our exchange 2007 server, and i hope any one can help me, each day i have one of our exchange servers can't receive emails, and all emails sent to users in this servers are queued in the sending email server, and i have to manually
    restart the Microsoft exchange transport service in this server so that it's able to receive emails, i found an error in the server that always repeated with different parameters
    the error is
    Error ID: 4999
    Error Source: MSExchange Common
    Watson report about to be sent to dw20.exe for process id: 3508, with parameters: E12, c-RTL-AMD64, 08.02.0254.000, edgetransport, M.E.Transport, M.E.P.S.SmtpInServer.HandleConnection, System.NullReferenceException, 69f8, 08.02.0254.000.  ErrorReportingEnabled:
    False
    i receive the same error each time the server stop responds but the parameters is changed each time (Process ID number always changed) like below
    Watson report about to be sent to dw20.exe for process id: 3644, with parameters: E12, c-RTL-AMD64, 08.02.0254.000, edgetransport, M.E.Transport, M.E.P.S.SmtpInServer.HandleConnection, System.NullReferenceException, 69f8, 08.02.0254.000.  ErrorReportingEnabled:
    False
    i hope any one can help me solving this problem
    the server is windows server 2008
    Exchange 2007 SP2 Server Rollup 5
    McAfee Enterprise Antivirus is in the box
    Backup Exec Agent is in the box Also
    a lot of transport rules applied to our exchange organization
    Mahmoud Sabry IT System Engineer

    Hi
    As per the information and details provided by you, Exchange server 2007 stop receiving emails, then please follow these steps: -
    If you do have a 60 GB partition on the C: drive, one of the first signs of trouble is when the free space on C: drops below 2GB. Exchange 2007 stops receiving external
    emails. This is caused by a condition known as Back Pressure.
    Please check the following: -
    Check the nslook up for correct MX record.
    Run the exbpa and llok for any recent changes.
    Check for the device in perimeter network which accepts connections on port 25 FW or any other anti spam device).
    Try to run a telnet session from the firwall and then out side and drop email on the server.
    I hope this information will be helpful for you.
    Thanks and regards
    Shweta@G 

  • TB stopped receiving emails after one with huge attachment. Updated TB. Can send but not receive. Using Yahoo POP server. Browser access works fine.

    Several days ago, after receiving a 7MB attachment, I stopped receiving email on my Yahoo POP account. Browser access to the Yahoo server works fine. I obviously deleted that message and attachment but curiously, it and only it continued to be downloaded to my inbox!!! I tried downloading a new TB and installing it. Nothing changed except that specific email no longer appeared (another did though, see later). Settings are to leave msgs on server until I delete them. I transferred all my inbox to a local folder and then compacted mail and tried testing reception from another source and nothing appeared on TB, just on browser access. Oddly, one very old message repeatedly appears, I assume as a result of the auto check for new mail but not sure. Though I try to delete this old message, I can't. I haven't removed and recreated account yet because I don't want to lose all the filter history. Scanned for solution and can't find any. Any ideas, please?

    Starting your mac in safe mode will disable the Symantec stuff long enough to download mail. Should the issue arise again
    [http://support.apple.com/kb/ht1564 OSX Safe mode instructions from Apple]

  • Mail won't quite without "force quite" , Mail stops receiving emails after a while, not happy about MAIL's performance!!!! :(

    I have massive problems with Mail.
    I use mail at work and have 3 accounts running
    1. Mac. mail account
    2. Gmail mail account
    3. Exchange Server
    I have quite a few folders in my accounts where I have to archive my emails to.
    Often very often or lets say annoyingly too often mail stops working.
    - stops receiving emails
    - emails I have put away in folders disapear in my inbox again
    - if I try to quite Mail it won't I have to force it and then when I open it again all my emails I was working on open again even so I have sent them already.Also all the emails I have folded away are back in my inbox WHAT A WAIST OF TIME!!
    I AM VERY UNHAPPY ABOUT MAILS PERFORMANCE AT THE MOMENT! IT SIMPLY DOESN'T WORK!
    Does anyone have the same problems and more importantly does anyone has a solution to this problem other then switching to Outlook???
    Thank you!
    Oliver

    I have the "stops receiving mail" problem with Exchange.  Sometimes I can open up the Activty window in Mail and stop  the stuck processes. Other times I have to close then reopen Mail.  I usually do the latter. A fix would be nice.
    I wonder if your other problems are related to this. The actual process of relocating your messages is maybe queued up behind one of the stuck processes. Just guessing. I have not had that problem.

  • TS3276 mail stop receiving emails after os update

    Since I updated my mountain lion, my mail stop receiving emails, I still got them on my iphone so i don;t know what's wrong with my mac. my chrome freezes and youtube videos start freezing as well.. there must be something wrong with the update!!

    What happened when you took the steps suggested in the support article?

  • Apple Mail not receiving emails after OS X update 10.6.7

    Hello,
    I have a strange problem. Apple mail has stopped receiving incoming messages after I did a software update of OS X 10.6.7. Outgoing mail is working fine.
    Funnily enough the same settings are still working on my Iphone where I continue to receive incoming email.
    I performed a rebuild on the mail and have done a combo update as well without any success.
    Please help!!
    Thank you

    My problem was resolved using this..
    http://support.apple.com/kb/TS3103
    Thank you.

  • LG Ally will not receive email after 2.2 update

    Does anyone know if they have the email problem fixed with the LG Ally after the 2.2 update? They told me it was a technical issue with the update and Embarqmail and that they would have to find a fix for it. So in the meantime they have sent me a new phone and told me not to update it to 2.2 until they have a fix for the Embarqmail problem. I would really like to upgrade to 2.2 so that I can start using some of the apps and games that I won't run on 2.1.

    I would be surprised that the v2.3 update has done this. None of my Canon inkjets are showing the same symptom after running the update, although I don't have any machine as old as your i860. Personally I think that your print head could be the cause and the update timing is a coincidence. With a faulty print head, you would get no output even then though your supply levels still show the black ink as full.
    I suggest you try a nozzle test. If you open Print & Fax, select the i860 and then click Options & Supplies, you should see a Utility tab. Select this and click Open Printer Utility. Then select the i860 and press the Maintenance button. Change the menu to Test Print and then select Nozzle Check. This will print a page and show you if all the inks are working. I would expect the black not to appear on this printed sheet. If this is so, you can then change the menu to Cleaning and click the Cleaning button. Do another nozzle test. If the black still does not print, then try doing Deep Cleaning.

  • Email Receiver QPAC - stops receiving emails after a while

    Hello,
    I have a workflow with the first step being an Email Receiver QPAC. Next I extract out some information to set to variables and then use the Chain QPAC to go to my next workflow and loop back to the Email Receiver (thanks Howard!). It works great immediately after invoking the workflow and I even left it running for one hour and tested it again and it works and received my email properly. So, I left everything running overnight, but now none of my emails are being received. I looked in the process manager and everything in running just fine, so the nothing stalled.
    I've been waiting for over 15 minutes now for my Email Receiver to go off and nothing.
    Does anyone have insight into what is going on?
    Thank you,
    Jennifer

    Hi Jennifer
    Try turning debugging on.
    In JBoss, you do this by modifying the log4j.xml in \Adobe\LiveCycle\jboss\server\all\conf
    Change the threshold from INFO to DEBUG for the file appender, as shown below:
    This will cause the EmailReceiver (as well as a whole lot of other classes) to send debug output to the log file:
    \Adobe\LiveCycle\jboss\server\all\log\server.log
    You should see some lines in the log file each time the EmailReceiver fires. These should tell you what it's searching for, and might give some insight into what's going wrong.
    Howard
    http://www.avoka.com

  • Temporarily stopped receiving emails

    I was on leave recently. about 5 days after I left my Microsoft outlook 2007 stopped receiving emails. when I came back, I read and deleted some emails then sent a test email to myself which was delivered without problem.
    Before I left I tried to set up out of office reply but failed.  is it possible that I may have changed a setting somewhere that could have caused this?
    I am on Windows 7 with Office 7.
    Regards
    D.
     

    Hi
    derekwinstone,
    Might be your Outlook setting has been changed and you are not able to receive emails. You should check it first. To Check your email configuration follow this:
    Tool >>Option>>Mail Setup>>Send Receive, Edit
    After clicking on the “Edit” button, a another pop-up window will appear and here you have to choose and enable the
    “Receive Mail Items” option.
    SMTP Server:
    1.) For Non-Encrypted and TLS: 587
    2.) For SSL: 465
    POP3 Server:
    1.) For Non-Encrypted:110
    2.) For SSL: 995
    Thanks
    Clark Kent

  • Stopped receiving emails in Outlook Express.

    Two days ago I suddenly stopped receiving emails in my Outlook Express.
    Outlook Express is configured to receive from my old Orange address which has never been a problem. Thinking it might be a problem with my Orange account, I checked with them and they assure me my account is still active. (I regularly log into my Orange account to keep it active.) Everything's been working fine for the past 2 years.
    None of my settings have been changed. Outgoing mail is mail.btinternet.com, and incoming mail is pop.orangehome.co.uk.
    I have just realised that around the time this happened I got an email in my Hotmail about changing from Hotmail to Outlook. When I opened this it said thank you for switching to Outlook, and then instead of being in Hotmail I was suddenly in Outlook! It didn't even ask me if I wanted to or not. But I noticed there was an option there to switch back to Hotmail which I did immediately.
    Of course, I don't know if it was that that stopped my Outlook Express from receiving mail. (I can still send mail from Outlook Express.) But it's the only thing I can think off and it does seem an odd coincidence.
    I've tried doing a System Restore back to the day before this happened, thinking there might have been a registry change or something which could be undone, but this didn't help.
    I'm now at my wit's end and panicking a bit. I'm a disabled pensioner, living alone, and rely on Outlook Express for all my financial and shopping stuff.
    Does anyone have any ideas where I might go from here?
    Thanks.
    Solved!
    Go to Solution.

    Solved!
    It was Orange's fault. They no longer require the @fs appendage at the end of the account name in Outlook Express account properties.
    Wish they'd told me.
    Phew!

  • Post Moved Stopped-receiving-emails-in-Outlook-Ex...

    Moved http://community.bt.com/t5/Other-BB-Queries/Stopped-receiving-emails-in-Outlook-Express/td-p/709872
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

    Solved!
    It was Orange's fault. They no longer require the @fs appendage at the end of the account name in Outlook Express account properties.
    Wish they'd told me.
    Phew!

  • My Ipad has stopped receiving emails today. It has IOS7 on it. The settings are correct but says "connection to the server failed" help!

    My Ipad has stopped receiving emails today. It has IOS7 on it. The settings are correct but says "connection to the server failed" help!
    It is the same accout that has been working find for years and just after I updated the software this has happened. My Mac is still receiving and sending via Outlook with the same account and settings. My Iphone 5C has also stopped and I tried deleting the account and adding again (via exchange as it's an exchange accout) the same way I always do and it won't even recognise it to add the settings.
    So annoying. Can anyone help?

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    iPad Mail
    http://www.apple.com/support/ipad/mail/
     Cheers, Tom

  • Mail stops receiving messages after a period of time

    Every since installing Mavericks my Mail app stops receiving messages after a period of time. I know because I get the email on my phone, but I try to grab them in Mail and nothing. If I restart Mail then they come through.
    I'm using Gmail as my email provider. Is anyone else suffering with this? Is there a work around?

    Workaround or not, this is an annoyance, and that's a nice way of putting it. Coming from Mountain Lion, when Mail was working flawlessly, having to deal with this issue is just plain ridiculous. What happened to the Mail application? I don't understand how Apple could screw this up to badly.
    Every time I restart or reset the connection to the servers, the Mail app is downloading thousands of messages (I can see the display on the bottom-left). I have no idea what it's doing or why, for that matter. If Apple doesn't fix this soon, I will seriously be forced to look for an alternative, which saddens me greatly. I really like Mail, but if it cannot reliably get my mail simply because I've left it open too long, or hidden it behind another window, I will stop using it.
    What's worse is that I've had similar issues with other applications like iPhoto and iTunes. Whatever is happening to Mail is probably not just application-specific. It's probably OS-specific. I hope Apple is working on it and that we will see a major update to Mavericks soon. All I know is that, right now, I'm seriously regretting upgrading to Mavericks.

  • Thunderbird stops receiving email.

    This only happens to one desktop out of 40+. The user reports that TB gets really slow and or stops receiving email. Evan after rebuilding the database and compressing.

    What is your anti-virus software?

  • 8520 has stopped receiving emails

    I have spent hours on the phone to vodafone to no avail and hours on google - someone please help!!!. My blackberry curve 8520 stopped receiving emails 5 days ago. I have rebooted, deleted email address and set up again. sent service books, enabled SSL. I am using outlook 2010 and I think the problem could be associated. When I send the service book to my blackberry, I get the message that I must tick the option to leave messages on the serve. This is not an option as it is an IMAP account. Does anyone know what I am talking about and can help..................pleeeeeese!

    "When you access an IMAP e-mail account, your messages are copied locally. However, the messages also remain on the e-mail server until you mark them for deletion and use the Purge Deleted Items command." - From Microsoft Support on Outlook 2010.
    Just to be sure, in Outlook you can go to Tools > Account Settings. Select the e-mail in question and click "Change". You'll see an option at the bottom of the new window saying "More Options" choose that and then select the "Advanced Tab". At the bottom of that tab, there should be a checkbox to leave the messages on the server and 2 additional options you can configure to suit your needs. 
    If this doesn't work for you, please do reply back.
    Disclaimer: I'm just a regular user like the rest of you. I have spent a lot of time learning the limitations of the Blackberries to know how to fix most problems. If I have suggested a fix, please give a kudo and mark as a solution!

Maybe you are looking for

  • 1st Gen Time Capsule thrashing modem

    Hi, I've got a 1st Generation Time Capsule with version 7.6 software, which was a replacement for one of the faulty ones a year or so back.  This one work fine for about a week, then appears to start polling (thrashing?) the modem, where the modem se

  • Error Code After Running Apple Hardware Test

    I ran apple hardware test (I'm having problems where my computer freezes for like 10 seconds with the mouse being movable... but it happens very frequently. like once a minute. it's SOOO ANNOYING) this is the error i got after running apple hardware

  • Need to create a product in Service Oder

    Hi Gurus, Standard Contract---> Service Plan ---> Service Order From Standard contract, I am creating a service plan through copy routine. The std contract has 3 products with it. But the service plan is getting copied with only one product. Now I am

  • Simple Mail Configuration in NACE

    Hi Gurus We have a requirement that system should send out an email to the partner carrier whenever a delivery is ready. However plz guide how to configure simple email in NACE for this requirement. I suppose a program is required with a smartform of

  • IPad Air wifi works but Safari returns message cannot connect to Apple server?

    using iPad Air wifi works but Safari returns message cannot connect to Apple server? (Friends iPad otherwise couldn't post!)