Output device - printing in unix file - where do I define the UNIX path?

Hi,
We use an special Output Device to print spool requests directly in Unix. These Output Devices are defined as Local Unix File. When those spool requests are printed, a file is created in certain path in UNIX.
The question is where this link is defined?, I dont see where in the Output Device (trn SPAD) is defined the path in UNIX.
Thanks!
Aaron

Hi,
Might be the unix path would have been defined in the SPAD only under the Access method of the output device, in the field Destination host.
Regards,
Aditya

Similar Messages

Cannot find PDL type for output device '(Printer name)'

Hi,
After seeing the statutory reports (PF, ESI etc) in standard format, we try to print form. We get the below error:
Cannot find PDL type for output device '(Printer name)'
Message no. FPRUNX113
Diagnosis
No PDL type has been found for the specified output device.
System Response
Error message
Procedure
Contact your system administrator.
Procedure for System Administration
For more information, see SAP Note 685571.
Any input will be off great help...
Regards
Pooja

Hello
It looks like that you had not installed the ADS(Adobe Document server) for the PDF type reports. Please check with your basis team if you want to configure ADS.
If you need the output as a sapscript then please do the sollowing steps:
(1) Execute transaction SM30
(2) Enter 'Table/View' as V_T5F99OCFT
(3) Select 'Maintain' option.
(4) Select 'New Entries' option from the Application Too
(5) Enter following entries:
     Logical Form Name    = HR_IN_EPF12A_99M
     Form Variant         = (Leave this field blank)
     End Date             = 31.12.9999
     Start Date           = 01.01.1990
     Form Type            = SAP Script (SSC)
     Def. Type            = (This field should be checke
     PDF Form Name        = HR_IN_EPF12A_99M
     SAP Script Form Name = HR_IN_EPF12A_99M
     Smart Form Name      = (Leave this field blank)
(6) Save the entries
The above example I have given you is only for the form 12A.
You have to make entries for all the reports sapscript in this table.
Please goto SE71 -> F4 -> Payroll -> Payroll India here you will find
all the sapscripts you require.
Regards
Ramana

Where do I define the automatic posting of goods issue to Cost Center?

Dear Experts,
I found out that all the raw material consumed each time I do the confirmation of process order via CORK did not post to Cost Center.
Where do I define the automatic posting to Cost Center for Goods issue for consumption?
regards,
Abraham

Hi,
I found out the default movement type has been predefined to 261 (GI for Order, in which it doesn't post to Cost Center). I guess the standard system has a valid reason to set it as 261 instead of 201 (GI for cost center).
As far as I understand, the Process order will accumulate all the costs (direct cost - material, labour and machine hour and also indirect cost) during the confirmation (material is backflushed and fnished goods is auto-GR). And at the end of the period, this process order will be settled its variance if there is (between the total cost credited - based on standard cost of the finished goods and actual total accumulated costs debited).
So, my question is, by right should there be any CO posting being made to Cost Center for material consumption in the above process flow as I checked in the standard system, the material movement for raw material and finished goods have no Cost Center posting at all?
regards,
Abraham

Where can i define the EPS-Inbox Directory???

Hi,
Where can i define the EPS-Inbox Directory???
Regards
Christian

Hi!
Also at AL11, you can display and configure current SAP directories.
Hope this help!
Juan

Output Device prints 3 copies of each print out

Hi Frnds,
We are facing a problem with the output device.
When we try to print anything from SAP to an out put device, it gives us 3 copies of same printout.
We tried with smartforms, sap scripts and even a normal print request from the anywhere in SAP. For the particular output device it gives 3 printouts.
That output device is configured to a particular printer here in the user location.
We have also tried couple of other things,
Made that particulrt printer as the default one in our operating system (Windows) and printed using LOCL output device. It printed only one copy.
Made other printer as the default in Windows and then print using LOCL output device, now again it printed only one copy, to another printer.
Since it prints 3 copies of the same thing from anywhere in SAP with this op device, We think that there is no problem in Print programs or in Output condition configurations.
The spool that gets generated out of this request says "No. of copies" 1.
Not really sure where its going wrong. We think the problem is somewhere in Basis settings.
If any one has faced this kind of issue can u please let me know how we can rectify this?
Regards,
Karthick C

Hello,
Are you using Access Method G for the output?
If so you can check if the following setting was set:
set use_copies = N (where N = number of copies) in
HKEY_CURRENT_USER\Software\SAP\SAPlpd\SAPLPD
Check the SAP note: 1149136 also.
Regards,
David

Output to Printer or PDF File Comes Out Small, Like Zoomed Out

I'm trying to print a 60 page family cookbook with text and pictures (17 mb, using the blank template). Everything looks fine on the screen as measured by the rulers, except for a large suspicious grey strip outside of the horizontally ruled area, along the left side of each page, inbetween the page and the left ruler (in 2-up view, there is a grey strip on the right side of the right hand page as well). In any files with these strips, the output to Print Preview, or the printer, or to PDF files is zoomed out so that the print area is about 70% of the original. I have some early versions of the files that look normal on the screen and which Pages outputs fine. In other words, there appears to be something wrong with these particular files. What?
I thought that since I had originally placed some objects that stuck outside of the margins that may have caused this change, but everything now seems to be within the page margins. The scale is set to 100%. I can't duplicate the problem, and I can't fix it.
Will the recipes get out on time?
iMac G4 Mac OS X (10.3.9) 256 mg ram

Welcome to the forums ShawnM. This problem is fortunately very easy to solve -- somehow Show Comments got turned on for your document. Go to the View menu and select Hide Comments, and that should do the trick.

LR3 - "A file is not located at the specified path...." AAAHHHHHHHH!!!!

Please help. I was edited a bunch of photos in LR3 last night and when I tried to export them they could not be exported. Then when I right-click and ask to go to image in finder. The dialogue comes up that says "file is not located at path..." Images are avail in preview with all my edits, etc, but WHERE is the image in the library????????????????
Please help guys!
Thanks very much in advance.

Beta issues should be posted to the Beta forum.
If you have moved the image file to a new location outside of LR (using the OS rather than LR itself), you will need to tell LR where it is now. Right click on the image or the folder and select update location, then point to where you have moved the file to. This problem is often a result of using external disks on windows systems where the disk hasn't been allocated a specific drive letter...for some reason windows allocates different letters every time the disk is conected. You need to allocate a drive letter permanently to the disk in windows if this is the case on your system.

"File Dialog" Express VI returns the wrong path when the user selects the desktop

In labview 8.0.1 with Windows
XP, the File Dialog Express VI seems to return something other than the path
selected by the user when configured to browse for folders (or files and
folders) and the user selects the desktop.
I can't determine exactly when it works and when it fails, but it always seems
to fail if the user selects the desktop from the places bar (the shortcuts on
the left side of the dialog) or from the drop-down menu at the top of the
dialog and then clicks the "Current Folder" button to dismiss the
dialog. In this case it always returns whatever path is wired to the
"Start Path" terminal.
If the user navigates to the desktop with the "Up One Level" button
or by selecting the actual desktop directory under Documents and Settings, the
correct path is returned.
If the user selects a file before clicking the desktop icon, then clicks
"Current Folder" the correct path is returned.
If the user clicks the desktop icon, clicks open, then clicks "Current
Folder" the correct path is returned.
It's possible to work around this bug in most cases by setting the start path
to the desktop.
Has anyone seen this behavior before?
Can anybody verify this behavior by running the attached VI?
In the past, when I've reported issues like this I've received responses from
NI engineers that basically said "Thanks, but we already knew
that". Is there anywhere that users can search the list of known
bugs and avoid wasting time tracking down issues that are already understood by
NI?
Thanks,
Adam Brewster
Attachments:
File Dialog Test.vi ‏39 KB

I'm on 8.2 and I can't get it to fail no matter how I select the desktop. I haven't tried it in 8.0, but I imagine that if this really is a bug, they did know about it and fixed it with 8.2. If this causes a real problem for you, I would suggest upgrading if you can.

Plz can someone tell me where can I define the material type?

Hi All,
I want to create a new group of material, there is a material type should be specified. I want to use my own. plz can someone tell me where can i define it?
thanks and regards,
samson

Hi Samson,
U can create a new material type using the tcode OMS2 and then copy the material type which u need to modify and then define the name of the new material type and make the required changes which u want for that material type and save it.
Hope it wud have answered ur question
reward if useful
Shawn

Oracle Files - where do i get the usage information ?

Hi ,
I am with OracleDirect , India. I am working to generate reports on usage of files in Oracle Files like who has created and modified ,locked a file and when (history of usage) ? what all files a person has accessed,modified , create (user history) ? etc... Is this information stored any where ? if so , where it is and how is it stored ? Is it stored in database or is it logged to some log ? If it is database please let me know , what tables have it ? or else if they are logs , what logs are to be looked at and do the logs have a specified format? and How can i go about to get the information from them and use it ?
Thanks in advance ,
Prakash.

Bernhard (guest) wrote:
: thanx for the advice. I think the links you posted will be
: helpful in the future.
: I found the source of my troubles on the SUSE homepage (ver 6.1
: does not use glibc 2.1).
: So now I needto find out how to upgrade to glibc 2.1
Upgrading to SuSe 6.2 would probably do the trick. Upgrade is
really smooth, and will take approximately 1h. I was able
to run oracle 8i client install on my PC and it works (32M,
160MHZ pentium) quite satisfactory. On my server machine
(450MHZ, 128MB) I'm running RH 6.0 and it also works fine.
On SuSe, I removed the "Kaffee" JVM installed by default and
downloaded JRE 1.1.7 from www.blackdown.org. I haven't tried
the "kaffe" engine but Oracle documentation requires blackdown.
Michael, if you read this, have you tried installing with the
default JVM engine delivered with SuSe 6.2?
As long as your operating system name doesn't start with "MS"
you should be OK.
: But first I will buy me a book about LINUX administration and
: hope to find the time reading it.
: Colin. (guest) wrote:
: : Bernhard (guest) wrote
: : : But anyway: This is my first try to install anything on
: LINUX.
: : : If anybody has some good advise for a rookie re.
: installation
: : : of ORACLE SERVER 8.15 on Linux I would be very thankful.
: : Try these links, there's lots of good tips to be found (and
: : thanks to the authors of these sites).
: : => A SuSE developers home page for Oracle.
: : www.suse.de/~mha/oracle/
: : => Install Guide for Redhat.
: : jordan.fortwayne.com/oracle/
: : => Oracle tips & scripts
: : www.akadia.com/html/dod-frame.html
: : amoeba.sagemediagroup.com/oracle_linux_howto/
: : www.orafaq.org/
: : www.oracle-dba.com/
: : www.kevinloney.com/
: : www.bf.rmit.edu.au/~orafaq/contents.html
: : www.lazydba.com/
: : www.dbasupport.com/
: : www.dbspecialists.com/
: : altern.org/place4oracle/oracle_contents.html
: : www.dbdomain.com
null

File Open/Save dialog Restrict the user path selection Is there any way?

Hello,
Is there any way by which we can restrict the user from selecting the path from the Folder Browser/ File Open/ File Save dialog boxes?
For example, I have a list of paths & want to allow the users to select from those paths or their sub folders. Is there any way to achieve this?
Thanks!
-Vinay Pugalia
If a post answers your question, please click "Mark As Answer" on that post or
"Vote as Helpful".
Web : Inkey Solutions
Blog : My Blog
Email : Vinay Pugalia

Hello Vinay Pugalia,
>>For example, I have a list of paths & want to allow the users to select from those paths or their sub folders. Is there any way to achieve this?
As far as I know, starting with Windows Vista, the Open and Save As common dialog boxes have been superseded by the
Common Item Dialog:
https://msdn.microsoft.com/en-us/library/windows/desktop/ms646960%28v=vs.85%29.aspx?f=255&MSPPError=-2147217396
You could have a try to restrict the value of “look in”(shown in the opne dialog) and “Save in”(shpwn in the save dialog). If you want an example about the usage of this API, you could post a code sample request to:
https://code.msdn.microsoft.com/site/requests
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Where could i define the FI document related configuation after GR.

Hi,
As we know that after GR, 2 documents would be created...
one is Material document, another is FI document...
I want to know from where in SPRO could i configue this FI document???
for example..FI document type..etc..
Thanks!!!!!!!

Hi
Path for OBA7:
SPro--> Financial Accounting --> Financial Accounting Global settings --> Document --> Document Header -> Define document types.
It seems to be OBF4 and OBA7 are same.OBF4 will call OBA7 from Inventory Management path.
Regards
Ramakrishna

Where do I define the author for a topic?

Need to know how to set or define who the "author" is for the
project and or topics. Anyone? I'm fairly new to Robohelp and have
not been find the place to do this. Thanks in advance for any help
you can provide!

Hi again Tracy at Cheval
In your situation, I might suggest you would benefit from
what I refer to as "poor man's version control". I'll outline
below:
Using careful coordination, two or three help authors can
easily achieve sharing a single RoboHelp project without resorting
to any type of a third party Source Control system. The key to this
approach is strict adherence to communication policies!
Source Control works like a combined traffic cop/librarian.
It is an automated way to allow collaboration between two or more
help authors. Here is a hypothetical situation. Three different
help authors have a need to "share" authoring responsibilities.
I'll refer to them as Mary, Bob and Mike. All three wish to update
and maintain a single RoboHelp project. There are a few different
ways that this can be done.
1. A Source Control system may be acquired and implemented.
This could be cost prohibitive and require setup, configuration and
ongoing maintenance that is undesired.
2. Mary, Bob and Mike may carefully communicate and
essentially "share" a single project.
3. The project may be carefully split into three different
projects and each of the authors becomes "captain of their own
ship" so to speak. Each author is totally responsible for
maintaining their own project.
In case number 1, a version control system is purchased and
implemented. In this case, once it has been installed, each user is
configured with a login name and password so that each is uniquely
identified. Then one or more projects are added to the version
control system. So let's say Mary checks out Topic1.htm to make an
edit. Then Mike comes along and wants access to the same topic. The
source control system says nope! Sorry, but Mary has it checked
out. You can't make changes until she checks it back in! In this
case, the source control system is preventing undesired changes
from being made to the files. The traffic cop part stopped Mike.
The librarian part kept track of the fact that Mary had the topic
checked out.
In case number 2, careful communication is mandatory. So
let's say Mike wants to make some changes. Here is what would need
to happen:
1. Mike sends a message to advise Mary and Bob that he will
be working on the project.
2. Mike copies the project from its central location to his
hard drive.
3. Mike opens the project, makes the changes, generates or
compiles, then saves the project.
4. Mike copies the modified version of the project from his
hard drive back to the central location. This replaces the original
with Mike's modified copy.
5. Mike then sends an "all clear" message to Mary and Bob,
advising that either of them are now free to make any changes.
6. Perhaps at this point, Bob needs to make changes. In this
case, the cycle repeats.
7. Bob sends a message to Mary and Mike advising he will be
working on the project.
8. Bob copies the project from its central location to his
hard drive.
9. Bob opens the project, makes the changes, generates or
compiles, then saves the project.
10. Bob copies the modified version of the project from his
hard drive back to the central location. This replaces Mike's
modified copy with Bob's modified copy. At this point, because
things were carefully applied, the central location now reflects
modifications made by both Mike as well as Bob.
In case number 3, each author has his/her own project. Each
is captian of his/her own ship! Essentially, each author has their
own copy on their own hard drive. When changes are required, they
simply open the project at any time they like, make changes and
copile or generate as needed. In this case, one person is normally
nominated as the "Master" or head person. This person's project
contains special information that tells it to "look" for the other
projects. This type of setup is known as either the "Parent/Child"
or the "Master/Slave". The end result is that the person viewing
your help system is actually viewing content provided by two or
more separate help systems. But from their perspective, they see
only one. So they are none the wiser.
Hopefully this helps... Rick

How i can define the installation path of the setup.msi installation file ?

Hi everybody,
The msi package generated during AIR app install is in a temporary folder ..../User/Username/Local/Temp/fla%.tmp/setup.msi.
My problem is the installation folder is always changing.
how can i define this folder in order to grant elevated access for users to install this package ?

up

Where I can define the order by for a dynamic SelectOneChoice list

Hi
I am using JDeveloper 10.1.3.1-Toplink/POJO for the DataModel and ADF JSF for disigned the web pages.
My problem is that I can not find the way to order the element of a dynamic SelectOneChoice.
Can anyone help me please?
Thanasi

Hi,
Not tested yet, but the order should be define in the method that retrieves the list values. You can specify an argument on this method and pass it in e.g. via a EL reference
Frank

Output device - printing in unix file - where do I define the UNIX path?

Similar Messages

Maybe you are looking for