Output to tape not recording

i'm trying to output a sequence to a mini dv tape.
My Sony DSR-11 is connecting to my g5 via "dv in/out" (on the sony) into a firewire port (on the g5)
i press the play and record buttons properly on the sony...run the sequence in the timeline, can hear the sony moving along (subtle, but it's there)...but nothing gets recorded
any ideas on what i'm missing here???
thanks
david

#8 External Monitor Viewing.
Shane's Stock Answer #8:
A simple path is mac > firewire > camera or deck > rca cables > tv
Then start up your camera and tv, then open fcp.
Then go View > External video > all frames
Video playback should be Apple firewire NTSC (If you are using an NTSC set)
Audio playback should be Audio follows Video
Techinially, this should send synched video to your TV
If for some reason you can't view your timeline on your external monitor, there are a few things to try:
1) Make sure that the camera/deck is connected and powered on BEFORE you open FCP.
2) In the Final Cut Pro menu select AUDIO/VIDEO Preferences and make sure your signal is being sent out thru Firewire DV.
3) Go to the menu and select VIEW>EXTERNAL>ALL FRAMES.
4) Click in the % box above the image and select FIT TO WINDOW.
5) Go to VIEW->refresh A/V devices
6) Make sure the Log & Capture window is closed
If you want it to play in both the canvas and the external monitor you need to go to the FINAL CUT PRO menu and select AUDIO/VIDIO settings and make sure MIRROR ON DESKTOP is selected under the PLAYBACK OUTPUT section
Shane

Similar Messages

  • Outputting to tape - NOT WORKING!?

    Hi,
    I'm trying to output to a mini-dv tape, and it's not working. I know I'm supposed to be using "Print to Tape" but it's not showing up on my camera screen. I went into Audio-settings and the audio playback is set to "FireWire DV" and the Video Playback is set to "Apple FireWire NTSC (720 x 480), also I chose "All Frames" through View and that didn't work either.
    What am I missing?

    hook up camera to 'puter, switch camera on into VCR mode (possibly 'play') - i.e not 'camera' or rec mode.
    Launch FCP > open project > select view > all frames > go file > print to video > click OK >
    Wait until writing video/audio finishes (if applicable) you should then be prompted to set your deck/camera to record which you should do, then press OK.
    Sometimes, depending upon what camera you use to record to, you may need to use the supplied remote control to go into 'record pause mode' prior to hitting the 'pause' button which will set the camera to record.
    What camera/deck are you using? The tape isn't set to 'record protect' is it?

  • Having trouble outputing to tape via firewire

    I'm trying to output to tape via firewire. However I'm only recording audio and not video. Device control preset is Firewire NTSC. Video playback preset is Apple Firewire NTSC (720 x 480)
    Any suggestion?

    Make sure the your Video out is set to ALL FRAMES along with the firewire.
    I've no experience with the deck so can't offer any help with it's settings.
    As a trouble shooting measure, does the video show up if you use another DV/Analog converter (then on to a TV monitor to visually verify)?
    x

  • Outputting to tape - setting the right audio level on the camera?

    Hey there,
    I'm using FCP 4.5 on OS 10.4 on a 1.8gHZ Powermac.
    I'm recording a mini-DV tape to be played in a theatre. I think I'm setting the reference tone to around 18dbs. However, I'm outputting the tape through a consumer camera.
    My question is, do I have to worry about setting the audio levels on the camera to reflect the reference tone of the sequence (ie the basic sound level of the sequence)? I'm not sure the camera even has that function - is it more something that needs attention on a pro deck?
    Any advice here would be much appreciated!
    Best
    Richard O'Sullivan
    UK

    In your scenario, the only thing you have to worry about during recording is that your audio level is below 0 dB (-12 dB is always a good level). Anything above 0 dB is pretty much unusable.
    If in doubt, its always better to record softer than louder.
    -Alexi

  • Output message can not be created in a PO

    Hi to you all,
    Output message can not be created in a PO for a customer. During my tests, the yellow output message was created automatically after I have saved the PO.
    I checked ME9F and the table NAST, there is no entry for the PO of the customer. This happens arbitrarily.
    Do you know how and why this can happen? Is it a program error or something else?
    Thanks.
    Esra

    Hi Esra,
    if I do understand you correctly, when creating the PO the system always finds a message to be created ("yellow" message). But arbitrarily the message cannot be generated in ME9F, correct?
    In my view, if the message is always determined correctly in the PO there cannot be any trouble concerning condition records, the error has to occur later in the process.
    Are there any error messages in the processing protocol of a message that cannot be created? What happens if you set the transmission time-spot to 4 (immediatelly)?
    Just my 2 cents
    Alicia

  • Output type is not appearing in ME22N

    Hi,
    I have created some POs through sales order.i.e created a sales order and taken the PR from that.
    Using ME59N, I have converted the PR to PO. The PO will have some output types attached (in the unprocesssed status).
    The Output types (in the MESSAGES) are visible in ME23N. When I look into the PO in change mode ME22N, the output  types are not appearing....  this is not the case with all the POs. Happening only for few POs.
    Could you please suggest.
    Ramana Malladi.

    Hello,
    Review your condition record values against the PO's that don't have an output type.
    Could be something like purchasing group, material group, etc.
    Regards
    Waza

  • Output type neu not coming automaticaly my document type zcpo contract po

    Hi
    I need output type neu automaticaly for create  purchase order  document type zcpo,nb,fo, this two condition type  coming automaticaly my output type neu,
    Following configurations i have completed for nb,fo,zcpo document type in Nace t.code
    In nace EF purchase order i click condition records NEU I click my key combination purchasing output determination document type
    purchasing document type is zcpo execute i give document type zcpo,fuction vn,medium i give 5.date time 3,lang EN,then
    i click communication comm strategy cs01,output device is HP,i tick print immidiately,request status is all statuses,status by mail is
    all statuses save it.
    in spro- messages- output control-fined tune message control-i give operation 1 for new my ouput type neu.still my condition type
    zcpo in po my output type neu not coming automaticaly plz suggest
    Regards
    Sam

    Hi,
    Go to MN05 Maintain Doc. Type, Function (VN), Medium (1), Date & Time (3) indicators select the row click on communication maintain out put device tick print immediately.
    Hope this will help you.
    Regards,
    Manish Jain

  • Output determination does not happen during Sales Document creation

    Hello All,
    I am facing an issue where the automatic output determination does not happen when the Sales Order is created. Let me explain a bit on the background.
    Output type ZDL2 has been defined as a special function (TNAPR-NACHA = 8) attached to a custom program and Form routine to create Outbound delivery after successful posting of the sales order.
    Condition records are maintained to trigger this output for the Key Combination of Sales Org/Distrib Channel/Division/Route. Access sequence has also been correctly maintained for the above fields.
    When the Sales order is saved, the output is supposed to be triggered but out of several sales orders created, it triggered for just one document. We have no clues on what could be the issue.
    One question here is, can we have the access sequence maintained for the fields from both header and item level (ie KOMKBV1 and KOMPBV1). Please be reminded that, in our case, the field ROUTE comes from the field catalog KOMPBV1.
    Another point which we noticed is that, the Function Module COMMUNICATION_AREA_KOMPBV1 which is supposed to fill the Item data Communication structure for output determination was never called.
    Has anyone came across such situations. Comments or suggestions are really appreciated.
    Kind Regards
    Sabu Kuriakose

    Sabu Kuriakose,
    Since you are using ROUTE as one parameter for the condition table, and it is at the item level.
    the output is triggered at the header level.
    So a sales order can contain multiple items with different routes. so at header level how will u identify the route ?
    the fields might be available for creatign the condition table but the problem is the fields should get the value during order processing.
    in the analsysis screen you will know that the field is getting the value of the ROUTE  or not ?
    also for creating a delivery you need a shipping point. same as above you can hae multiple items with different shipping points. how will u consider that scenario.
    If you can explain that, then that will be helpful to answer your problem.

  • Cant output to tape

    I finished my project now I want to output to tape. Im using a sony min dv handycam. I print to video the bars and countdown are recorded on to tape then the tape stops. Is this a special feature in FCP Xpress? anyone have this problem????????? where is my ouput setting on the menu I cant find it.

    yes I have an in and out set, it plays on the recorder when I just run the timeline but I cant record on the fly because when I hit record on the camera does nothing. where are my settings?

  • SHIPMENT OUTPUT TYPE AUTOMATICALLY NOT DETERMINED

    DEAR SAP Gurus,
    I got one issue i.e in shipment document the output type is not determined automatically.I checked the config settings , everything is ok and condition records are already maintained. Pl resolve this ASAP . I need to close this issue in 2 days..
    Thanks in Advance...
    Regards,
    Rafiq

    hi,
    You will resolve it following this:
    o  Start Transaction VL10CUC ("Parameter per Profile in Delivery
       Process") in the change mode.
    o  Goto the detail screen of profile '2000'.
    o  Check the status of parameter 'No OutputDet.' and correct the
       setting of the parameter:
       -  If parameter 'No OutputDet.' is active, the output
          determination is not executed for the process.
       -  If parameter 'No OutputDet.' is not set, the output
          determination is executed for the process.
    Regards,
    david

  • No table line started. Output to cell not possible

    Hi Everybody:
    I have developed a smartform where in if i give single record as input, it comes fine, but if more than one record is given thru selection scr, the error comes  No table line started. Output to cell not possible when page break is issued.
    Pls help as to why is it coming,
    I also tried SF TRACE, but when i display the error, it says Cannot read from the database.
    Best Regards, Neetu

    To print the internal table's data in the smartform you should use the TABLE.
    LIke define a TABLE, inside the table define required table types.
    Put your data inside your main ... under the Table by using one of the line type.
    Regards,
    Naimesh Patel

  • Output message type not triggered for few POs

    ---PRs got created manually. then PRs converted into POs through background job (me59n).
    ( 25 PRs got created manually with same vendor and pur.org combination then all PRs converted into POs through ME59N. In that 20 PRs had message type automatically but remaining POs haven't got the message type )
    Condition record exists with vendor/pur.org combination.
    and all IMG settings are correct.
    medium is 8 (special function).
    and not able to replicate the issue in quality systems.
    Please Advise.
    Thanks in advance.

    PRs will not get any message type, POs will get a message record.
    How is the situation now?
    Did  you get 20 POs only, or do you have 25 POs where just 20 have a message record?
    In the first case  convert the PR manually to a PO manually and see if you get a message record. You should not enter anything manually, it is supposed to work without entering anything manually because it was meant for auto PO. In case you have to enter anything manually, then this might be an indicator why auto PO could not work.
    if the latter case, then compare a PO with and without message record on the fields that should match with your condition record.
    Do you expect the same message type for all POs, are they all in the same purchasing organisation?
    Read and check what is mentioned in KBA 1829682 - Output type is not determined in Purchase order

  • Automatic PO output Determination do not get trigger for SRM Classic impl

    Hello,
    We have implemented SRM 7.0 classic scenarios. We have set up system in such a way that whatever user put in Preferred Supplier at Shopping cart while saving the shopping cart we convert it to Supplier partner type and once approved create PO in ERP system.
    Things are working perfectly fine but the problem we are facing is Output determination. We have Vendor email address maintained in vendor master and placed Condition type in MN04 for vendor with Immediate output of email.
    But whenever PO is being created that automatic output determination is not being triggered...
    Could anyone please help what thing i am missing.
    Thanks
    Ritesh

    Hi,
    Please check the created condition record in MN06 in all aspects i.e. partner fucntion name, Medium (5), Language, etc.
    I believe  you have created the condition record with the combination of vendor/pur.org/document type.
    Also check the Actual processing tab and general data is there any check box against Locked field.
    Thanks
    Rajesh K

  • Can videos not recorded on the new ipad be edited with imovie?

    can videos not recorded on the new ipad be edited with imovie?

    Hi
    Please rephrase Your Question - I'm not clever enough to get it
    There are lot's of Cameras that record in lot's of different ways that can be edited in iMovie.
    No iMovie can not use all Video-Codec's in the World - they are zillions and many needs to be converted to something iMovie can open and work with.
    • Still digital Cameras as Nikons - Import into iPhoto and then in iMovie Event's window import from iPhoto-videos title
    • miniDV tape Cameras - connects only via FireWire - then just Import from Camera into Event's
    • SD-Card or Hard Disk Cameras Connects most ofthen via USB and Import from "File or other"
    • from Internet - (out of my range - Guessing) - most will need to be converted into something iMovie likes - I would try
    - StreamingDV .dv - or -
    - AIC (Apple Intermediate Codec)
    So as You see - I don't get it !
    Yours Bengt W

  • Soundbooth CS4 will not record files

    I am having an issue with Soundbooth CS4 not recording a file. I can open the record box and select my audio source (Alesis USB mixer in this case) but when I hit record nothing records. The record button does highlight however no audio is record or wave form shows.... Ive tested the setup (Alesis USB mixer into my MacBook Pro) with Audacity and it works fine, all settings are correct with the Soundcard and with OS X.. Ive been recording into Audacity, saving, then opening in Soundbooth to do processing. While this works, I would like to get my moneys worth out of Soundbooth and do all my recording, processing, and editing in the same app. I've attached a photo of the screen for you to review...
    Thanks in advance for any help you can offer.

    Hmm.  So when playback is fine but record just hangs, it's often a clocking issue.  Is this device one of the MultiMix systems?  If so, what version of OS X are you running and have you updated the drivers for the device?  I know there were some problems with Alesis support on OS X 10.5.5 or 10.5.6 and they released some updated drivers on their website to address the problems.  That would be my next recommendation.
    If that fails, we may want to create a custom Aggregate Device with limited inputs to troubleshoot this.  You can do this by launching "Audio MIDI Setup" (located at /Applications/Utilities/) and chooseing "Aggregate Device Editor" from the menu.  Here you can create a new device and specify only a specific set of inputs and outputs from your Alesis, choosing which one you'd like to act as the Master Clock.  After this is created, select the new device in Soundbooth's Audio Preferences and see if you get different behavior.
    We do have an Alesis MultiMix 8 around here, but it's currently locked in a coworker's office who's on vacation until Monday.
    Durin

Maybe you are looking for