Output type and program for ARE1 & ARE3

Dear Friends,
Kindly explain somebody what are the standard output types & Program for printing   ARE1 & ARE3?
What is the process for getting print of these document?
Thanks in advance

Dear Friend,
Thanks for your useful inputs, however I am sorry that even after changing processing routine we are getting same error and system is showing dump message.
Runtime Errors         LOAD_PROGRAM_NOT_FOUND
Except.                CX_SY_PROGRAM_NOT_FOUND
IF i_trntyp = 'ARE1' OR i_trntyp = 'ARE3'.
  SELECT SINGLE *
      INTO ls_areattrb
      FROM j_1iare_attrb
      WHERE sergrp = ls_exchdr-srgrp
        AND trntyp = i_trntyp.
  IF sy-subrc = 0.
    l_output_typ = ls_areattrb-outtyp.
  ELSE.
    MESSAGE s000(8i) WITH 'Output Determination not possible'.
                                                           "#EC NOTEXT
  ENDIF.
ENDIF.
SELECT SINGLE * FROM tnapr INTO wa_tnapr
      WHERE kschl = l_output_typ.
IF sy-subrc NE 0.
  MESSAGE i621(8i) WITH l_output_typ.
ENDIF.
IF i_trntyp = 'ARE1'.
  l_form  = wa_tnapr-fonam.
ELSEIF i_trntyp = 'ARE3'.
  l_form  = wa_tnapr-fonam2.
ENDIF.
PERFORM (wa_tnapr-ronam) IN PROGRAM (wa_tnapr-pgnam)
          TABLES it_excdtl
          USING i_trntyp l_form i_copies ls_exchdr.

Similar Messages

  • Finding output type and form for the transaction

    hi all,
       i have a problem finding output type and form for the transaction j1iv .actually i need to find the standard output type and form name for the transaction j1iv. how can we do it.

    Hi Abinash,
         Go through the following steps.
                     1 . Go to the transaction <b>NACE.</b>
                     2. You will be able to see the <b>Application and description</b> tab over  
                         there. Select the Application for which you need the output type.
                     3. After selecting the Application..on the top you can see the tab--
                        output types...click in that..here you will be able to see all the <b>output
                        types for that application.</b>
                    4. Now select a output type ..and on the left side u will be able to see
                       the tab for processing routines...double click on it...
                    5. Here you will be able to see the standard SAP program...the form
                       routine...the form..attached to it..
                Please Reward..if helpful..
    Regards,
    Himanshu.

  • Output type and application for order cancellation

    What is the output type and application for the cancellation of a sales order

    Hi,
    Try This
    cancellation of sales order:
    go to va02 enter the sales order and click enter
    then sales document->delete
    Reward if usefull

  • Output Type and Determination for Cash Sale

    Hi Experts
    what is output type for cash sale invoice , and how we can do output determination for cash sale process ?
    thanks in advance

    Hi Hanumant,
    Use output type RD03  for cash sale, For output determination go to SPRO 
    IMG>Sales and Distribution>Basic Functions>Output Control>Output determination>Output determination using condition technique>Maintain Output Determination for Sales Documents.
    Regards
    M.Mohanavel

  • Standard driver programs,output type ,scripts,smartforms for SD reports

    hi experts,
                  Can any one list all the standard driver programs,output types ,scripts,smartforms for SD reports.
    mani

    Hi,
    Check this out
    NACE
    You can track the form and the print program used for that form
    The Tcode NACE is used to link the Standard SAP forms (SCRIPTFORM or SMARTFORM) or the customized form or the new form to its respective print programs. Also the output types, Form entry are linked with their forms and print programs. In short term, i can tell u that configuration or customization of forms to print programs, assigning output types, form entry to the forms are done using this Tcode.
    NACE is used to create output type while creating the output type you will mention forms, and driver program.
    that will be maintained in the table TNAPR.if you create the output type using NACE then it will be automatically visible in table NAST and TNAPR.
    so check in NAST, TNAPR table
    http://help.sap.com/saphelp_erp2005/helpdata/en/c8/1989fe43b111d1896f0000e8322d00/frameset.htm
    Condition records in NACE?
    and
    NACE is used for message control customizing.
    Take a look at the following link
    http://help.sap.com/saphelp_nw04/helpdata/en/c8/198a1843b111d1896f0000e8322d00/frameset.htm
    and also
    NACE is used for message control customizing.
    Take a look at the following link
    http://help.sap.com/saphelp_nw04/helpdata/en/c8/198a1843b111d1896f0000e8322d00/frameset.htm
    If it helps reward with points..

  • How to assign output type and trigger printing in ABAP

    hi all,
    i have create invoice by using BAPI_BILLINGDOC_CREATEMULTIPLE and create header/item text with CREATE_TEXT.
    please advise how to assign the output type and trigger immediate printing after this.
    thanks.

    Hi Reetha ,
    This is a functional setting  , and should be done by some functional guy. The setting can be done by NACE.
    Just follow the path : NACE - > Select V3 for Billing - > Press Output type Button Just above - > Assign Output Type and
    then Assign Output program and form in PROCESSING ROUTINE comes into left. Set this output type for immediate print.
    Whenever You create a billing document by BAPI with this document type , the print out will be fired immediately.
    Hope it will solve your problem.
    Thanks.

  • Output type is generating for each spilt batch in the delivery

    Hi All,
    We are using Z output type for COA - EDI processing which uses standard program RSNASTED. I observed that  output type is triggered for each individual batch in the delivery . I want to know how can I restrict to trigger output type only for item instead of each barches. Can I get some solution in the output type configuration (NACE) to trigger output type for item level.
    Regards,
    Uday

    Udaya,
    I got the fix. There was wrong output procedure maintained to the output type.
    What was the reason for different output behavior for output type ZXYZ?
    1.Output type-ZABC- Triggering for both item and batch
    10 - Main Material - 30 EA - ZTAN- contains output determination in V/73
    90001 - Batch-001 - 10 EA - ZBAT
    90002 - Batch-002 - 20 EA - ZBAT
    2.Output type-ZXYZ- Triggering only for Item
    10 - Main Material - 30 EA - ZTAN
    90001 - Batch-001 - 10 EA - ZBAT
    90002 - Batch-002 - 20 EA - ZBAT
    Thanks!

  • What are the output type and Tcodes?+

    What are the output type and Tcodes?

    hi,
    ex-how to config output type.
    You will assign output types using Transaction NACE.
    Do the follow steps to assign output type
    1)Select Application Type V2 which will have description Shipping.
    2)Click on Output types button.
    3)Go to change mode by pressing Ctrl+F4.
    4)Select one output type which already exists
    5)Do Copy As(F6)
    6)Give your output type against Output Type field.
    7)Under General data Tab, Give Program and Form routine and Save the data.
    i think it a work of functional guy but at senior level i think it is not a big deal for abaper.
    Check the following documentation
    In NACE t-codewe have the application for each one. based on the application output type can be defined, based on output type script and print progrma can be defined.
    If suppose data can be read from EDI then we should go for condition records.
    So whenever we execute the script first composer checks the output type and then execute the program. in program whenever opn form FM will be populate then script will open first. After that again program till another FM will populate if it then script will populate........like it is cycle proces. Composer does all these things and at last it will submit that output to spool.
    Go to the Transaction NACE.
    choose the related sub module.. like billing or shipping
    doubel click on Output Types
    Choose the Output Type for which whcih you wanted your script to trigger
    Then select the Output Type and double click on Processing Routine
    Then go to create new entries--> Select the Medium (1- print output), then enter your Script and Print Program detls --> Save and come out
    Now go to the Transaction (for which you have created the output type)... Issue output--> Select the output type --> Print....
    Device Types for SAP Output Devices (Detail Information)
    Definition
    The device type indicates the type of printer to be addressed. When you define an output device, choose the name of the device type that was defined in the SAP System for your printer model, such as Post2 for a PostScript printer. In the case of frontend printing under Microsoft Windows, you can also use the generic (device-independent) device type SWIN.
    The system uses the information in the device type to convert a document from the internal SAP character representation (spool request in OTF or in text format) to a device-specific, print-ready data stream (output request). Since a device type specifies attributes that apply to all devices of a certain model, it can be shared among device definitions. For example, all devices in the SAP spool system that are compatible with Hewlett-Packard LaserJet IIID printers would use the HPLJIIID device type.
    You should not confuse the device type with the printer driver. The device type is the total of all attributes of an output device that the SAP System must know to control the output device correctly, such as control commands for font selection, page size, character set selection, and so on. These attributes also include the printer driver that SAPscript/Smart Forms (the SAP form processor) should use for this printer. The SAPscript printer driver that is to be used for devices of this type for output formatting is therefore only an attribute that the device type specifies.
    How do I choose the correct device type?
    • In most cases, the SAP System already provides the appropriate device type for the printer type for the printer model that you want to use.
    These standard device types are completely defined and need no modification or extension before you use them in device definitions.
    • You can also download missing device types from the sapserv server. For a current list of the supported device types, see SAP Note 8928 in the SAP Service Marketplace.
    • Most printers can be controlled using a generic format, such as PostScript. They can be switched to a mode that is compatible with one of the standard printers for which an SAP device type is available. In this case, a supported model is emulated.
    • Almost all printers are delivered with Microsoft Windows printer drivers. The system can control these printers with the generic (device-independent) device type SWIN. The Microsoft Windows spool system then performs the processing of the print data.
    • If the specified device types are not available, and generic device types cannot be used, you must create your own device type or edit a copy of an existing device type. We recommend that only those with specialist knowledge of the SAP Spool System and printer driver code do this. For more information, see Defining a New Device Type .
    Attributes of a Device Type
    A device type is distinguished by the attributes listed below. If you change an existing device type or create a new device type, you must change at least some of these attributes.
    • Character set: A character set specifies the codes with which characters must be represented in the print-ready output stream (output request). This code replaces the generic SAP characters set that is used internally by the SAP spool system (spool request).
    • Printer driver: You can specify different printer drivers for printing SAPscript documents and ABAP lists.
    • Print controls: Print controls represent printer operations, such as boldface or changing the font size. These print control are replaced by printer-specific commands during the creation of the output request from a spool request.
    • Formats: Formats specify the format supported by the SAP system. The system differentiates between SAPScript formats (DINA4 and LETTER) and ABAP list formats (X_65_132 = 65 rows/132 columns).
    • Page format: A page format is the interface between a format and SAPscript. It specifies the paper dimensions with which SAPScript can calculate the row and column lengths.
    • Actions: Actions are output device-specific commands that are required for the implementation of a format. The action printer initialization, for example, can contain a printer command with which the number of rows on a page is defined. There is a set of actions for every format supported by a device type.
    regards
    siva

  • Define Output type and Local destination per user

    Hi Gurus,
    Nowadays us have defined Output type by Sales Organiztion/Order Type (S_TCODE = VV11).
    Is possible define Output type and Local destination per user?. How to do?.
    thanks and best regards,
    Wilson

    Hi Wilson
    As per my understanding of requirement: you want output type and Local destination for each SAP End user (i.e. who is processing sales order) not the customer. If this is the requirement, we have two solution for it:
    1) If for a particular region/sales district customer are contacting to one particular destination, then create access sequence with output type/order type/sales district. Means for one sales district one Local destination. If sales district is big area and you have many local destination with in that, then you can divide it into regions.
    2) Ask your ABAPer to create a Z table and maintain Local destination for all Users. And amend the print program such that before saving the output entry into NAST table, based on SY-UNAME(user's id), fetch the printer (local destination) from Z table and update the NAST table accordingly.
    As per my observations, option 2 is simpler and more effective.
    try and revert.

  • Difference between "output type" and "output medium" in interface

    Can comebody kindly tell me the difference between "output type" and "output medium" with respect to interface?
    Thanks,
    Max

    Hi,
    Output medium means , how you wants to see the output like
    Printout, Fax, Mail, or EDI output etc
    Output type/Condition Type means for every Application document an Output type is create for the Output Message determination, this is linked with the Condition records, Medium, Program and the Output Script or smartform.
    reward points if useful
    regards,
    ANJI

  • Output type not created for outbound delivery while using SHMNT05 idoc type

    Hi Experts,
    Please help me to solve the below issue.
    Problem:- I want to to generate an IDOC(using type SHPMNT06) once the PGI is done for an outbound delivery.
    Already it is working fine when used DESADV.DESADV01 or DESADV.DELVRY07. But now the output type is not getting created when used SHMNT.SHPMNT06. I have created a separate output type ZPJ7 just as a mirror copy of the earlier output type(ZPJ6) used for DESADV.DELVRY07.
    Question:- Is it possible to use idoc SHPMNT06 instead for DESADV01 or DELVRY07? If yes then what are steps to be followed?
    The reason why SHPMNT06 idoc is planned:- We have a scenario to send outbound delivery to 3rd party system via XI. If the outbound delivery is for National(Not for Export) and PGI is completed then send the idoc straight forward to XI otherwise DO NOT generate the idoc, but just create the delivery. Collect all the deliveries in a transport and send it in a shipment. The shipment details can be sent using SHPMNT idoc. Now from XI perspective, if we can utlitze the same SHPMNT idoc for the National delivery(1st case) then perhaps this will require less effort. Hence shipment idoc is required to be generated when the delivery is created and PGI is done.
    Also it would be great if you can advice some better way to solve above mentioned scenario.
    Many Thanks,
    Sanjay

    There could be several reasons. Go to the document and in the extras-output check output determination analysis in the processing log.
    If the output has been created successfully then you need to see your printer determination. Ask basis to check it up. If the problem is that even the print preview is not coming. Check your communication in the output analysis and ensure LOCL is selected. Any other printer will need to be configured.
    If thats done already then check whether you have maintianed the condition record.
    If that too is done then check whether your output type has been assigned to the output procedure and that the output type is listed in the procedure.
    regds
    Jude

  • Output Types and output determination procedure

    Hi All,
       What is the output type and output determination procedure for the following:
    1) Credit Memo Request
    2) Credit Memo
    3) Debit Memo Request
    4) Debit Memo
    Regards
    Ashis

    Hi Ashis,
    As per the standard
    1) Credit Memo Request-
    Procedure-V10000
    Output type-BA00
    2) Credit Memo
    Procedure-V10000
    Output type-RD00
    3) Debit Memo Request
    Procedure-V10000
    Output type-RD00
    4) Debit Memo
    Procedure-V10000
    Output type-BA00
    I hope it will help you,
    Regards,
    Murali.

  • Output type and Routine

    Hi All,
    I have created one Z* output type and attached it with Z* program. and it is having routine called ENTRY_N. Now when i execute a transaction which will trigger my output type, is giving me error saying "Processing routine ENTRY_N in program Z* does not exist".
    Can anyone help.
    Regards,
    Dharmesh

    > Hi,
    >
    > in the Driver Program have a routine with name ENTRY.
    > just paste it.
    >
    >
    FORM ENTRY USING RETURN_CODE US_SCREEN.
    >
    >   CLEAR RETCODE.
    >   XSCREEN = US_SCREEN.
    <i>>   PERFORM PROCESSING.</i>
    >   IF RETCODE NE 0.
    >     RETURN_CODE = 1.
    >    ELSE.
    >     RETURN_CODE = 0.
    >   ENDIF.
    >
    > ENDFORM.
    >
    > and put the aboce code in it.
    >
    in the above code Perform processing you need include all your open_forms and write_forms, close_form. the data you are trying to pass it to script. i hope it is clear.you need to put that logic in the <b>form ENTRY</b>.
    regards
    vijay

  • Regarding output type and idoc trigger issue

    Hi
    i need to copy pgi quantity into sales order quantity for that i write a code into user exit MV50AFZ1. code is working fine but
    output type and idoc is not trigger due to this. In this exit to update sales order quantity i used bapi *BAPI_SALESORDER_CHANGE . can anyone tell me why o/p type and idoc not trigger ,what is the reason and what is the solution for this?
    Thanks
    Dinesh

    Hi Dinesh,
    Did you activate the enhancement for user exit ?
    Did you check if the output type is configured correctly ?
    Put a debugging point and see if control is coming there.
    Regards,
    Nisha Vengal.

  • Need Billing doc. number based on header Output type and also billing docum

    Hi
    I have header Output type and also billing document type.
    will you please help me to get the billing document no. based on above combination, any SAP table, i was aware about the same. but i forgot the table name.
    Thanks
    Vanraj

    Hi,
    Check the Table NAST for the Billing documents associated with the OUTPUT type.
    regards,
    santosh

Maybe you are looking for

  • Trouble with the device after iOS 5.0.1 update

    After upgrding my iPod Touch 4G to iOS 5.0.1, the device seems to have slowed down a little bit. For instance when im listening to music and i unlock my iPoad it takes a long tme to unlock (5-6 secs).Even during multi-tasking i experience a serious l

  • Java Card 2.2.2 draft is out for public review

    A draft for the upcoming release of the Java Card Specification is available for public review. The Java Card 2.2.2 Specification will provide numerous enhancements to the award-winning Java Card platform. In particular it will include specific suppo

  • Subscreen ALV reload

    Hi, I got a dynpro which contains a subscreen. The dynpro is called after a selection screen. In the dynpro, I add a couple of lines to the alv-table and refresh it - works fine. Problem is if i leave the dynpro with the back button (leave to screen

  • Linking to local video on iPad

    Hello, I'm trying to link to a local file on the iPad from a pdf or ePub and have no idea what the file directory is for QuickTime movies in the Videos application. Does anybody know how to link to a local file on the iPad? Thanks very much.

  • 10.4.6 update on imac g5

    Update via software update on monday, install and double reboot all ok, only bug i've noticed is that on the progress bar when using "connect to server". Once you have seleced the server you want to connect to, it shows a progress bar that usually th