Override the attribute value for EO based VO

I have a VO attribute which is based on EO. This VO attribute value is dislayed as messageStyledText on the seeded page. This value is updated via the Seeded AM.
I want to make this messageStyledText as free form TextInput so i can enter the value for it. I dont want the AM calculating the value and displaying it.
How do i override this VO attribute value?
Thanks

we do not want to calculate the value as user can enter any value as long as it is greater than the number of values in the VO's.
So the user can just enter 20 in the Textinput which means 20 people attended some class but they can enter only 10 people actually. So users dont have to enter all the information as sometimes it could be in hundreds like in conference. it is just for information purpose.
I want to use the value but not calculate it.
so am i doing right like mentioned in the previous thread?

Similar Messages

How to restrict the attribute values for the user in query designer

Hi All,
I have a requirment where certain user would see certain vailes in the query desiner of the attribute.
The requirment is we have planing material which is attribute of material
When X user want to restrict the values for planning material ,where he is able to see all the planning material.But who is not authorized for all the value.
Ex: X user has authorization for see planning material 100,101,102. of material But when he try to restrict the planning material in query designer where is getting all values of planing material.
Or
is there way to blank the restriction help.so that he can't able to see values while restricting
Please some one can advise me on it..

Hi,
Let me sum up:
you have an object ZPLNMAT for the planning material
you have the object 0MATERIAL for material and this object has ZPLNMAT as attribute.
If you can restrict in the query designer, I suppose this attribute is then as navigationnal and also added in the multi-provider.
The object ZPLNMAT is checked as relevant for authorization, and you set up a role with the attached values of ZPLNMAT this user should have access to.
Are you sure the users are restricting on the ZPLNMAT object and not 0MATERIAL, because you should have everything now
PY

How to use SQL import to set the attribute value based on another?

Hello all,
I want to set an attribute of a dimension based on another attribute (if matches). Let's say I have a dimension PRODUCT. And I have defined two user defined attributes MANAGER and ISVISIBLE.
Now within a PERMIT_READ program I want to set the ISIVISIBLE to true where the MANAGER Value is selected from a table.
Something like
<define a cursor c1 to select all the Manager values>
sql import c1 into -
:MATCHSKIPERR PRODUCT_MANAGER then <PRODUCT_ISVISIBLE (PRODUCT MANAGER) = true>
<etc>
Obviously the above is not correct. But I am stuck as to how this can be done? Can some one on this forum please help me with correct syntax/ approach please?
Thanks a lot.
Pxsheth
This statement assigns true to the isvisible attribute for every gc_dim_bu dimension (selected as part of cursor c1).
SO FAR SO GOOD.. NOW -
If I want to change the above so that the attribute value gets assigned based on another attribute for the dimension (say a flag). i.e.
Set the isvisible to true where attribute flag has a certain value. How do I code this in OLAP DML?

There are a number of ways to do this. If you want to use an attribute that has been defined within AWM as an attribute of Product then simply using the mapping tool to populate the attribute as part of the normal dimension load procedure.
Alternatively you could create an attribute at the DML level, and assuming you are not using surrogate keys, you can then define a cursor to read the relational table to populate your attribute. Something like this:
sql declare MKT_BASKET cursor for -
select PRODUCT_ID, PROD_MGR , PROD_VISIBLE -
from PRODUCT_DIM
if SQLCODE ne 0
then goto ERROR
sql open MY_CURSOR
sql fetch MY-CURSOR loop into :append PRODUCT, :PRODUCT_MANAGER, :PRODUCT_ISVISIBLE
sql close MY_CURSOR
sql cleanup
update
commit
If you want to create a complex PERMIT function using OLAP DML then personally I would create a formula and assign a program of type BOOLEAN and have the program return a YES or NO depending on the outcome of your test. Then your PERMIT_READ still references a dimension object. For example:
DEFINE PROD.ISVISIBLE BOOLEAN FORMULA <PRODUCT>
EQ PRG.ISVISIBLE(PRODUCT)
DEFINE PRG.ISVISBLE PROGRAM BOOLEAN
The program will then return Yes or No depending on the processing you need to do.
Hope this helps
Keith Laker
Data Warehouse Solution Architect
Oracle EMEA Consulting
BI Blog: http://oraclebi.blogspot.com/
DM Blog: http://oracledmt.blogspot.com/
BI on Oracle: http://www.oracle.com/bi/
BI on OTN: http://www.oracle.com/technology/products/bi/
BI Samples: http://www.oracle.com/technology/products/bi/samples/

Protecting the attribute value from getting reset!

Hello all,
I have attached a custom drop down search help to the attribute "SERVICE_UNIT_NAME" in the "BTPARTNERSET" context node. The drop down list contains a blank entry as well as a couple of other entries, I have placed a create object statement for my search help class in the Getter method "GET_V_SERVICE_UNIT_NAME" while written the following code in the setter method "GET_P_SERVICE_UNIT_NAME" as suggested by one of the esteemed experts here on the forum.
case iv_property.
when if_bsp_wd_model_setter_getter=>fp_fieldtype.
rv_value = cl_bsp_dlc_view_descriptor=>field_type_picklist.
endcase.
This drop down list is showing correctly, however my problem is that if the user selects any value from the drop down list, the selected value gets copied to the attribute but when ever the user press an "ENTER KEY" or any other action, the value in the attribute gets initialized to the first value in the drop down list which is a "BLANK" value. I want to preserve the value originally selected by the user from the drop down list, without it being reset by any other user actions on the screen. Do I need to redefine any other method for this attribute? I'll appreciate any help.
Regards,

Naresh and Sumit, many thanks for your valuable inputs however, I have tried your code but I am still facing the same issue, as the attribute value for "SERVICE_UNIT_NAME" is getting refresh every time an "ENTER" is pressed on the page. Let me specify some other detail that may help in understanding this behaviour for the attribute value, actually when on the initial page, user has to enter his phone no / network ID, so that the standard functionality bring about the city, postal code, country etc. so once these values are set in the related attributes, the user will click on the incident button, which brings about a search help (web dialogue) for partner selection, so any value selected, is displayed afterwards in the "SERVICE_UNIT_NAME" attribute on the next page. However, after putting the custom drop down list at the said attribute, the value selected on the previous page is not populating in the attribute and the user can select the value from the custom drop down list now, but once he press "ENTER" or pushes any other button the page, the selected value in the attribute gets initialized. Is there a way to check for the user input?

Not getting all the attributes value from Trusted Recon in eventhandler

Hi,
I am not getting the values of all the attributes in hashmap from Trusted recon in eventhandler.
Following is the hashmap value I am getting :
Parameter Hashmap value is {re_key=1869, Email=[email protected], Role=Full-Time, act_key=22, User Login=TUser43, Xellerate Type=End-User, Last Name=User43, First Name=Test}
Please let me know how to get all the attributes value in eventhandler. I need to take some decisions based on these attributes.
Thanks

You should be getting all the values in the recon event.
To get the current user states for all the records in the bulk event use this:
Identity[] currentUserStates = (Identity[]) eventDataHashMap.get("CURRENT_USER");
Now when you are looping through your bulkParametersp[], you can use the same get from the currentUserStates:
Identity currentUser = null;
currentUser = currentUserStates[counter];
Now if the attribute is not in your hashmap, you can use:
currentUserState.getAttributes().get(attribute)
-Kevini

How can I access the Attribute Values from the Search Region

Hi all,
I have a table which contains Company id, department id, and PositonId. For a particular Company and Department there may be multiple records.
I have to pupulate a table which contains the position and other details that comes under a particular Department and Position based on the selection in the Three comboBoxes.
Also I have to populate a select many Shuttle to add new postions and records under a particular Department.
I created a query panel *(Search Region)* for the serch and a table to display the data. That is working fine.
Now the issue is I am using a view criteria to populate the shuttle with two bind variables ie, DepartmentId and CompanyId.
If the serach will return a resuktant set in the table it will also pupulate the correct records, otherwise ie, if the if the serch result is empty the corresponding iterator and the attribute is setting as null.
SO I want to access the attribute values from the Search Region itsef to populate the shuttle.
I don't know how can I access the data from the Search Region.
Please Help.
Regards,
Ranjith

you could access the parameters entered in search region by the user as follows:
You can get handle to the value entered by the user using queryListener method in af:query.
You can intercept the values entered as described
public void onQueryList(QueryEvent queryEvent) {
// The generated QueryListener replaced by this method
//#{bindings.ImplicitViewCriteriaQuery.processQuery}
QueryDescriptor qdes = queryEvent.getDescriptor();
//get the name of the QueryCriteria
System.out.println("NAME "+qdes.getName());
List<Criterion> searchList = qdes.getConjunctionCriterion().getCriterionList();
for ( Criterion c : searchList) {
if (c instanceof AttributeCriterion ) {
AttributeCriterion a = (AttributeCriterion) c;
a.getValues();
for ( Object o : a.getValues()){
System.out.println(o.toString());
//call default Query Event
invokeQueryEventMethodExpression("#{bindings.ImplicitViewCriteriaQuery.processQuery}",queryEvent);
public void onQueryTable(QueryEvent queryEvent) {
// The generated QueryListener replaced by this method
//#{bindings.ImplicitViewCriteriaQuery.processQuery}
QueryDescriptor qdes = queryEvent.getDescriptor();
//get the name of the QueryCriteria
System.out.println("NAME "+qdes.getName());
invokeQueryEventMethodExpression("#{bindings.ImplicitViewCriteriaQuery.processQuery}",queryEvent);
private void invokeQueryEventMethodExpression(String expression, QueryEvent queryEvent){
FacesContext fctx = FacesContext.getCurrentInstance();
ELContext elctx = fctx.getELContext();
ExpressionFactory efactory = fctx.getApplication().getExpressionFactory();
MethodExpression me = efactory.createMethodExpression(elctx,expression, Object.class, new Class[]{QueryEvent.class});
me.invoke(elctx, new Object[]{queryEvent});
Thanks,
Navaneeth

MDSModelDeploy Operation Failed, clone cannot be deployed, The Attribute Value is not valid

I've created a model containing a customer entity with various domain based attributes. I've populated the entities via a combination of manual entry and the staging tables. In the source system I have approx 950 customer records, all of which
fail validation on the source system as some of the attributes will be maintained only in MDS and are not in the source systems I'm pulling the initial data from.
I ran the MDSModelDeploy.exe to create a package containing data on the source system. I then ran the package to apply the package using the -deployclone option on my target system. I piped the output into a flat file for review.
Here is the error I'm receiving.
MDSModelDeploy operation failed. Elapsed time: 00:01:00.2314612
Error:
A clone of the "Subzero_1" model cannot be deployed.
An error occurred while processing message request type 'EntityMembersMergeRequest'. See exception details for more information.
Package deployment failed with 344 errors
The attribute value is not valid.
The attribute value is not valid.   (repeated 344 times)
Any ideas what the issue might be? I have tried verbose logging as well and did not find anything that would point me in the direction of the problem. The end result was that the model was not deployed to the target.
I have also created a package without data, deployed that, then applied the data. This gets the model to the target and the data also appears to be there but I did receive this error on the deployupdate.
This is on SQL Server 2012.

I am seeing the same error. Created a model, Cloned the model. Made changes to the clone (Schema and Data), and used MDSModelDeploy UpdateModel to update the primary (not cloned) model. In looking at the log, I see the error shown below, but I do not
see anything that points to what was happening at the time.
I tried running a SQL trace to see if one of the SQL commands received an error, but none of the commands did.
In looking at the model that was updated, I can see all of the schema changes were made, and most of the data was updated. There is one table that did not update completely. The attributes in the table consist of Domain Specific and text attributes only.
I also verified that everything on both models was validated before starting.
In the weblog I see the error listed below, but there is nothing in the data that would match that value
Not sure were to go from here....
Chad
--- MDSMODELDEPLOY ERROR RECEIVED ---
MDS Error: 0 : Microsoft.MasterDataServices.WebUI.ServiceAdapterObjectInvalidException: An error occurred while processing message request type 'EntityMembersMergeRequest'. See exception details for more information.
   at Microsoft.MasterDataServices.WebUI.ServiceAdapter.InspectResponseForErrors(MessageRequest request, MessageResponse response)
   at Microsoft.MasterDataServices.WebUI.ServiceAdapter.ExecuteRequest[TRequestType,TResponseType](MdmServiceOperation`2 operation, TRequestType request)
   at Microsoft.MasterDataServices.WebUI.ServiceAdapter.DoEntityMembersMerge(EntityMembers entityMembers)
   at Microsoft.MasterDataServices.Deployment.ModelDeployer.BatchEntityMembersMerge(Collection`1 masterData, Boolean membersOnly, Int32 batchSize, Int32 totalBatches, Collection`1 errors)
   at Microsoft.MasterDataServices.Deployment.ModelDeployer.UpdateData(Collection`1 masterData, Warnings errorsAsWarnings)
   at Microsoft.MasterDataServices.Deployment.ModelDeployer.DeployUpdate(Package package, Boolean includeData, Identifier targetVersionId)
   at Microsoft.MasterDataServices.Deployment.Utility.ModelDeploy.DeployUpdate(String serviceName, String packageFile, String versionName)
   at Microsoft.MasterDataServices.Deployment.Utility.ModelDeploy.Main(String[] args)
    DateTime=2014-02-06T16:03:17.8405277Z
-- WEB ERROR RECEIVED --
MDS Verbose: 0 : Unable to convert value of query string parameter Id = VID to an integer
    DateTime=2014-02-06T17:18:00.7367274Z

Attributes and attribute values for a Product

Hi all
Is there any table or FM from where I can get a list of all the attributes and the attribute values linked to a particular product?
I got tables which link product with Prod Category, Prod Category with Set types and so on.
Could anyoe please provide me an FM which will give the attribute and its values for a particular product?
Please help!!
Regards
Debolina

Attributes created under s settype will be under the table with the name of that particular settype itself i.e Table name and the settype name are the same.
The other part of your question of where to find the list of all settypes and their corresposing attributes, you can make use of COMM_PR_FRG_REL.
Regards,
Harshit

How to find out the ASCII Values for Spanish character

Hi,
I had an requirement to store Spanish character and also need to fileter the records based on the Spanish character.
Kindly guide me for below.
To filter the Records which contains spanish characters?
To get the ASCII Values for the particular column?
E.g. we can find out the ASCII value of 'a' by using the syntax select ASCII('a') from dual.
But I want to find the ASCII Values for the particular column value. Ie. name.
E.g., Client name is "Suresh", I want to the ASCII Values for entire name of "Suresh".
Kindly do the needful help / Guidance on this.
Thanks,
Orahar

To expand on what I said in my first post, you want to do something along these lines:
with t (thename) as
select 'Suresh' from dual
select thename
     , substr(TheName, level, 1)
     , ascii(substr(thename, level))
from t
connect by level <= length(thename);The output of the above query is:
THENAM S ASCII(SUBSTR(THENAME,LEVEL))
Suresh S                           83
Suresh u                          117
Suresh r                          114
Suresh e                          101
Suresh s                          115
Suresh h                          104
6 rows selected.Note that the WITH statement is only there to simulate a table for this example. With a table, all you do is get rid of the with and substitute the name "t" for the name of your table (also the name of the column to whatever name the column has in your table).
Lastly, I suggest you post your question along with, an example table and the output you'd like to get in the PL/SQL forum. There are people there that will give you all kinds of great ways of solving that problem.
HTH,
John.

How to get the attribute value of an XML file??

How to get the attribute value of an XML file??
For example, how to get name and age attributes?
<student name="Joe" age="20" />

What are you using to read the XML file??
On the assumption of JDOM - www.jdom.org. Something along the lines of:SAXBuilder builder = new SAXBuilder(true);
Document doc = builder.build(filename);
Element root = doc.getRootElement();
List children = root.getChildren();
Element thisElement = (Element)children.get(n);
String name = thisElement.getAttributeValue("name")
try
int age = Integer.parseInt(thisElement.getAttributeValue("age"));
catch (Exception ex)
throw new InvalidElementException("Expected an int.....");
}Ben

Which table the characteristic values of accounting based COPA are stored?

Hi Guru,
we are using Accounting based COPA. we need to generate a report based on the characteristic values updated while posting to revenue accounts.
i searched the CE4XXXX and COSP tables but i am unable to get the results. COSP is not havinf the the revenue GL accounts PA characteristics.
CE4XXXX is not having the the PAOBJNR(profitability object no) updated in BSEG for the revenue accounts.
from which table can i capture the characteristic values for a line item posted in BSEG.
regards
Jaya

HI
refer CE4XXXX_ACCT for account based COPA
The function module to read chars from PSG is RKE_GET_CHARS_FOR_PAOBJNR
Regards
Ajay M

How to make default value for region based on city?

Dear Experts,
When city is selected in TRIP or PR05, how to make the default value of city based on region?
The standard search help givenfot citydoesnt contain any enhancement point?
Pls suggest how to resolve this!!!
Thanks In Advance
Rgrds,
Sravan

Hello Sahil
Account and CC/PC are 2 different entity types. For PC and CC there is dependency. First you have to load Cost centers and then load PC.
For CC - load CC master data first. Then load hierarchy file then group file and finally assignment file.
Follow same process for PC.
GL you can load independently but you have first load group GL then operational GL and then GL at company code level,
Kiran

Runtime error to get the attribute value of an element

mydoc.xml
=========
<?xml version = "1.0"?>
<persons>
     <person name="Joe" age="22" />
</persons>
In mydox.xml, I want to get the attribute values of element person. Of course,
in the actual XML file, it is more complicated.
However, I get the following run-time error,
Exception in thread "main" java.lang.NullPointerException
at ParserTest.main(ParserTest2.java:18) on line element.hasAttribute("name")
import java.io.*;
import javax.xml.transform.*;
import javax.xml.transform.dom.*;
import javax.xml.transform.stream.*;
import org.w3c.dom.*;
import javax.xml.parsers.*;
import org.xml.sax.*;
public class ParserTest2
     public static void main(String[] args) throws ParserConfigurationException, SAXException
          String xmlFile = "mydoc.xml";
          doc = getDocumentFromFile(xmlFile);
          Element element = doc.getElementById("person");
          //Exception in thread "main" java.lang.NullPointerException
          if (element.hasAttribute("name"))
          {     System.out.println("attribute = " + element.getAttribute("name"));
     public static Document getDocumentFromFile(String xmlFile)
               try
                    DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
                    DocumentBuilder builder = factory.newDocumentBuilder();
                    Document doc = builder.parse(new File(xmlFile));
                    return doc;
               catch(IOException e)
               {     e.printStackTrace();
                    return null;
               catch(SAXException e)
               {     e.printStackTrace();
                    return null;
               catch(ParserConfigurationException e)
               {     e.printStackTrace();
                    return null;
     private static Document doc;
any ideas? Thanks!!

[url http://java.sun.com/j2se/1.4.2/docs/api/java/lang/NullPointerException.html]java.lang.NullPointerException
Thrown when an application attempts to use null in a case where an object is required. These include:
Calling the instance method of a null object.
Accessing or modifying the field of a null object.
Taking the length of null as if it were an array.
Accessing or modifying the slots of null as if it were an array.
Throwing null as if it were a Throwable value.
You know what line it happens on, so you know which of these cases applies. So you know that variable "element" is null at that point. How could it come to be null? You assign to it only once, two lines above. How could that assignment be null? Check the documentation for [url http://java.sun.com/j2se/1.4.2/docs/api/org/w3c/dom/Document.html#getElementById(java.lang.String)]org.w3c.dom.Document.getElementById().
Repeat every time you get one of those exceptions.

How to get the attribute values out?

Hi everyone,
<root>
<category name="Mens Clothing" id="0">
<subcategory>Active/Baselayer Tops</subcategory>
<subcategory>Active/Baselayer
Bottoms</subcategory>
</category>
<category name="Womens Clothing" id="1">
<subcategory>aaa</subcategory>
<subcategory>bbb</subcategory>
</category>
</root>
How to get the attribute values out? For example "Mens
Clothing" and "Womens Clothing".
// the line below returns "Active/Baselayer Tops" and
"Active/Baselayer Bottoms"
var myXml:XML = new XML(event.result);
Thanks,
May

Here is attribute identifier operator from FB Help:
@ attribute identifier Operator
Usage myXML.@attributeName
Identifies attributes of an XML or XMLList object. For
example, myXML.@id identifies attributes named id for the myXML XML
object. You can also use the following syntax to access attributes:
myXML.attribute("id"), myXML["@id"], and myXML.@["id"]. The syntax
myXML.@id is recommended. To return an XMLList object of all
attribute names, use @*. To return an attribute with a name that
matches an ActionScript reserved word, use the attribute() method
instead of the @ operator.
Operands attributeName:* — The name of the attribute.
Example
How to use examples
The first example shows how to use the @ (at sign) operator
to identify an attribute of an element:
var myXML:XML =
<item id = "42">
<catalogName>Presta tube</catalogName>
<price>3.99</price>
</item>;
trace(myXML.@id); // 42The next example returns all attribute
names:
var xml:XML =<example id='123' color='blue'/>
var xml2:XMLList = xml.@*;
trace(xml2 is XMLList); // true
trace(xml2.length()); // 2
for (var i:int = 0; i < xml2.length(); i++)
trace(typeof(xml2
)); // xml
trace(xml2.nodeKind()); // attribute
trace(xml2
.name()); // id and color
} The next example returns an attribute with a name that
matches a reserved word in ActionScript. You cannot use the syntax
xml.@class (since class is a reserved word in ActionScript). You
need to use the syntax xml.attribute("class"):
var xml:XML = <example class='123'/>
trace(xml.attribute("class"));

ADS MA : the XML exported file (export to log file) doesn't export Distinguished Name in the attribute member for a group

Hello,
I am facing a weird issue during the export of a group to a log file (xml).
I have configured my ADLDS management agent such as the export run profile exports data into a XML Ffile:
Everything is fine in the XML, I see my new accounts, the attributes updated for accounts but for an unknown reason the group which should contains accounts does
not contain the DN values.
It contains the tags <dn-value> and <dn> but <dn> is empty
e.g:
<delta operation="update" dn="CN=GroupX,OU=Users,DC=ZZZZ">
<anchor encoding="base64">XDSQDQDQ</anchor>
<dn-attr name="member" operation="add" multivalued="true">
<dn-value>
<dn/>
</dn-value>
<dn-value>
<dn/>
</dn-value>
</dn-attr>
During the export, FIM updates the attribute "member" of the group:
Member attribute seems to be caught by FIM during synchro profile and export profil bt not translates correctly in the final xml file.
Any ideas?
Thanks for your reply.

Thinking the same thing as David - sounds like a bug - but that's curious because I've never had a problem with the AD MA doing exactly the same thing, albeit with FIM R1 most recently. What version of FIM are you using, and have you checked the
release notes of any subsequent versions to see if any such issue is mentioned?
Bob Bradley (FIMBob @
TheFIMTeam.com) ... now using FIM Event Broker for just-in-time delivery of FIM 2010 policy via the sync engine, and continuous compliance for FIM

Override the attribute value for EO based VO

Similar Messages

Maybe you are looking for