OWB x64 bit client installed with RDBMS does not work?

Has anyone tried the OWB 11gR1 (11.1.0.7) client installed with Oracle database x64? I found out that I could not perform the following tasks:
1. could not create a new table
2. could not import MDL file the first time for a project (only project name is added; I had to run the second time to get all the profile and maps imported)
It throw out an OWB internal error and hangs after having the above two problems. Is there any configuration need to be done to get it to work correctly?
Thanks,
htu

The OWB x64 bit client is broken:
https://metalink2.oracle.com/metalink/plsql/f?p=130:15:1377335913212499434::::p15_database_id,p15_docid,p15_show_header,p15_show_help,p15_black_frame,p15_font:BUG,8871963,1,1,1,helvetica
This is what is this document:
"Only server side functionality (repo creation, ControlCenter, OMB) is supported on server platforms. Design client needs to run on Linux-32 or
Windows-32. This is not a bug in OWB. "
Has anyone tried the OWB client installed with x32 Oracle database? Does the OWB client with 32 database work?
Thanks,
HT

Similar Messages

HT4235 iPod nano 6th generation, syncing with audiobooks does not work now, had been working. Sync test says: No iPod touch, iPhone, or iPad found. Connectivity test OK, no physical problems, iTunes shows the iPod. Any clues what to do?

iPod nano 6th generation, syncing with audiobooks does not work now, had been working. Sync test says: No iPod touch, iPhone, or iPad found. Connectivity test OK, no physical problems, iTunes shows the iPod. Any clues what to do?

Hmm.. Thank you for the response.
Have you tried using the iPod with another user account or computer, to help narrow down whether the problem lies with the computer, account, or the iPod itself?
Maybe try reformatting it, using the tools provided by Windows. Instructions on how to reformat your iPod can be found in this article.
http://www.methodshop.com/gadgets/ipodsupport/erase/index.shtml
B-rock

Brand new Mac user help please! How do you connect a 17" monitor to the MacBook? I have the monitor plugged into the Mac, but the F8 that I am used to with PC does not work. Please help. Thanks.

Brand new Mac user help please! How do you connect a 17" monitor to the MacBook? I have the monitor plugged into the Mac, but the F8 that I am used to with PC does not work. Please help. I am getting lots of spelling errors as the MacBook laptop screen is too small. Thank you so much! .

Contentmom6 wrote:
Brand new Mac user help please! How do you connect a 17" monitor to the MacBook? I have the monitor plugged into the Mac, but the F8 that I am used to with PC does not work.
Normally, you just connect the monitor to the MacBook using a VGA adaptor that you can buy from an Apple Store. Now try System Preferences > Displays > Detect Displays. You should now be able to select a display mode for the monitor. If it still doesn't work, then I'd check that everything is properly connected. I've had problems with colours disappearing due to a faulty connection in the VGA adaptor.
Bob

Serial number provided with download does not work, now what?

serial number provided with download does not work, now what?

Chrish29593217 you are welcome to contact our directly at Contact Customer Care. What Adobe software title are you facing difficulties with?

Hello, all of a sudden I fell down my system and completely erased all bookmarks. Your progress with restoration does not work, send me ansver,please

Hello, all of a sudden I fell down my system and completely erased all bookmarks. Your progress with restoration does not work, write me of bookmarks could not be loaded. Please advice on everything because I came and they seriously need it.

Did your computer crash or did Firefox crash causing the loss of the bookmarks?
You can check for problems with the places.sqlite database file in the Firefox Profile Folder.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
See also:
*http://kb.mozillazine.org/Lost_bookmarks
*http://kb.mozillazine.org/Firefox_crashes
*https://support.mozilla.org/kb/Firefox+crashes

Sync with Itunes does not work

Hi,
I reinstalled latest Itunes completly but still sync with outlook 2007 does not work.
Itunes says Sync finished, but nothing is synced.
Here is the log:
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] ===================
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] iTunes.exe begins
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] ===================
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] "C:\Programme\iTunes\iTunes.exe"
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] ALLUSERSPROFILE=C:\Dokumente und Einstellungen\All Users
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] APPDATA=C:\Dokumente und Einstellungen\mispde\Anwendungsdaten
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] asl.log=Destination=file;OnFirstLog=command,environment
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] CIHOLOSCLI=C:\Programme\Seagate Software\Open Olap\
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] CLASSPATH=.;C:\Programme\Java\jre6\lib\ext\QTJava.zip
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] CommonProgramFiles=C:\Programme\Gemeinsame Dateien
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] COMPUTERNAME=MISPDE0
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] ComSpec=C:\WINDOWS\system32\cmd.exe
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] FPNO_HOSTCHECK=NO
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] HARVESTHOME=C:\Programme\CA\AllFusion Harvest Change Manager
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] HOME=C:\Programme\Computer Associates International, inc.\CCC Harvest
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] HOMEDRIVE=C:
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] HOMEPATH=\Dokumente und Einstellungen\mispde
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] LOCALHARVESTHOME=C:\Programme\CA\AllFusion Harvest Change Manager
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] LOGONSERVER=\\ERLCNDC1
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] NewEnvironment1=C:\Programme\Vodafone\Vodafone Mobile Connect\"Optimization Client"
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] NUMBEROFPROCESSORS=2
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] OS=Windows_NT
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] Path=C:\Programme\Gemeinsame Dateien\Apple\Apple Application Support\;C:\Programme\Gemeinsame Dateien\Microsoft Shared\Windows Live;C:\Programme\CA\SharedComponents\PEC\bin;C:\WINDOWS\system32;C:\WINDOWS;C: \WINDOWS\System32\Wbem;C:\Programme\Microsoft SQL Server\80\Tools\Binn\;C:\oracle\ora102\bin;L:\deployment files\runtime;L:\development\client;D:\FOUNDA~1\fnd301\deployment files\runtime;D:\FOUNDA~1\fnd301\development\client;C:\Programme\Samsung\Samsun g PC Studio 3\;C:\WINDOWS\system32\WindowsPowerShell\v1.0;C:\Programme\CA\AllFusion Harvest Change Manager;C:\Programme\QuickTime\QTSystem\;C:\Programme\Gemeinsame Dateien\Microsoft Shared\Windows Live
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.PSC1
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] PERL5LIB=C:\oracle\ora102\perl\lib\5.8.3\MSWin32-x86;C:\oracle\ora102\perl\lib\ 5.8.3;C:\oracle\ora102\perl\5.8.3\lib\MSWin32-x86-multi-thread;C:\oracle\ora102\ perl\site\5.8.3;C:\oracle\ora102\perl\site\5.8.3\lib;C:\oracle\ora102\sysman\adm in\scripts
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] PROCESSOR_ARCHITECTURE=x86
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] PROCESSOR_IDENTIFIER=x86 Family 6 Model 15 Stepping 11, GenuineIntel
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] PROCESSOR_LEVEL=6
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] PROCESSOR_REVISION=0f0b
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] ProgramFiles=C:\Programme
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] QTJAVA=C:\Programme\Java\jre6\lib\ext\QTJava.zip
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] RTARCH=i86_w32
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] RTHOME=C:\Programme\CA\SharedComponents\PEC
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] SESSIONNAME=Console
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] SQLBASE=C:\Oracle\ora102\NETWORK\ADMIN
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] SystemDrive=C:
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] SystemRoot=C:\WINDOWS
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] TEMP=C:\DOKUME~1\mispde\LOKALE~1\Temp
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] TMP=C:\DOKUME~1\mispde\LOKALE~1\Temp
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] TNS_ADMIN=C:\Oracle\ora102\NETWORK\ADMIN
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] USERDNSDOMAIN=CORPNET.IFSWORLD.COM
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] USERDOMAIN=CORPNET
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] USERNAME=mispde
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] USERPROFILE=C:\Dokumente und Einstellungen\mispde
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] VS90COMNTOOLS=C:\Programme\Microsoft Visual Studio 9.0\Common7\Tools\
[3068 @ Wed Jun 09 10:45:52 2010] [ASL ASL] windir=C:\WINDOWS
[3068 @ Wed Jun 09 10:45:52 2010] [(unknown facility) iTunes.exe] receive_message: Could not receive secure message: -1
[3068 @ Wed Jun 09 10:45:52 2010] [(unknown facility) iTunes.exe] readthread: Could not receive message
[7028 @ Wed Jun 09 10:47:00 2010] [_ISDVLog SyncServer.exe] Cancelling all sync plans.
[7028 @ Wed Jun 09 10:47:00 2010] [_ISDVLog SyncServer.exe] Goodnight, Gracie.
Please help me!

*I just spoke with two different senior advisors from Apple one whose name was Matt and the other whose name was Zachary. They both were extremely rude and were not helpful at all. I explained the same exact scenario to them about how I just updated to iTunes 9.1.1 and that now my iPhone will not sync.*
The ONLY help they could give me was to purchase a plan for either 29.99 or 69.99
The reason no one from Apple will help us is because this company is based on greed. I am sure they knew about this bug that prevents thousands of users from syncing but I am also sure they assumed that we would pay the 29.99 or 69.99 for them to fix the problem. I honestly feel as though this is a scam to make more profit off of us.
There is absolutely NOTHING they can do to help they said except for me to purchase one of those two plans they offer. My question is WHY THE **** SHOULD I PAY FOR SOMETHING THAT I AM NOT AT FAULT FOR? It should be there moral duty and responsibility to fix this bug yet because they know they will profit from it they have no intentions on doing so. The only thing I can really suggest is calling Apple and telling them how you feel. The more people who voice there opinions the better (just be prepared for them to tell you the ONLY thing they can do to fix the problem THEY created is by making YOU pay more money to fix it).
I am extremely disappointed as a loyal Apple customer and this has seriously made me reconsider ever buying another Apple product.
This company is morally and ethically wrong.

Sending by mail an Invoice with VF02 does not work

Hi guys,
When using VF02 to send by mail an invoce form, the functional consultant is in trouble since it does not work. I am ABAP consultant, and before starting to debug the huge amount of lines of code behind this transaction, I think there might be a more straight solution. When setting the invoice number and entering this transaction, we accessed Goto->Header->Output. The output table to enter our fields appears. Here we set ZXXX as output type and External send like the Medium. When I press enter, the line is automatically filled with the rest of fields. Then we go to Further Data and choose the Send Immediatelly (when saving the application) option. Get back and press Save button. After it, a message "Please enter a communication strategy" is shown and the SD consultant told me that the correct option is MAIL (in fact, this option is part of the F4 help, with "email" as descriptive text) in the Communication strategy field. She told me it should be all to send a mail with the invoice. We did not fill the Logical destination nor checked "Print immediatelly" or "Release after output" checkboxes since they are not useful in this case. So when finally Save button is pressed, a message appears: " ", and then a dialog box appears with the following message: " Express document "Update was terminated" received from author "GILBERTO PARGA"". The mail received in my inbox is only a error message with title "Update was terminated" and the content is the following:
Update was terminated
System ID....   XXX
Client.......   999
User.....   SOMEBODY
Transaction..   VF02
Update key...   XXXXXXXXXXXXXXXXXXXXXX
Generated....   12.05.2011, 20:37:27
Completed....   12.05.2011, 20:37:27
Error Info...   Output device not defined.
The system is SAP ECC 6.0. Note that the message indicates no output device was defined, but since we are using email instead of print output, it does not matter. I have filled the field with the same result. I have read from Internet it could be a configuration trouble (the SD consultant checked it before, according herself) or even a Basis issue. Anyway, do you know the possible causes and possible solutions (like OSS Notes) for this trouble? The print output works fine, by the way. Thank you all for your help.

Hi,
If you maintain method EXTERNAL SEND then in communication method you have to specify Communication strategy as CS01(Internet/letter)
If you maintain method simple mail then in communication method you have to maintain RECIPIENT and RECIPIENT TYPE
Also check the number range assignment for billing type for error "Update was terminated"
you might be assigned numbers which are already consumed.
kapil

Lync 2013 - Silent install via .msp does not work

The thread listed below is marked as "answered" and indeed the answer given is correct and should work. . . but recently it seems to have stopped working for many.
(EDIT: Site will not allow me to post the link I was planning to post, "until it verifies my account." So, I can only refer you to the thread named "Lync 2013 Client - Silent Installation")
Specifically, it should be possible to do a silent install of Lync 2013 by following the instructions given in the link above to use setup.exe /admin and create an .msp to put in the "updates" folder for the silent install.
The problem is, recently (September 2014-ish) this appears to have stopped working. The thread quoted above has several people replying, all during September 2014, that this method does not work. I am among them. Lync 2013 runs through
the setup, but only Office Tools ever appears as installed in the Start menu. However, if you go to Control Panel, Uninstall Programs, and look for Lync 2013, it is listed there. You can then tell it to "repair" the Lync installation,
and it reinstalls properly. This, of course, defeats the whole purpose of trying to do a silent install, however.
Since it appears that the .msp silent install method used to work, but now does not -- what changed? And what kind of workaround can be used?

Hi,
Did the Lync Package to be the latest version from Microsoft Website?
As the issue have been met by several users, you can feedback the issue on the link below:
http://blogs.technet.com/b/lync/archive/2012/11/01/lync-app-feedback-you-asked-and-here-it-is.aspx
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Title in combination with videoclip does not work.

I did pre-order the dutch version Premiere Elements 9. (Del. mid okt.) Until that time I installed the english trialversion PE 9.
I tried to place a title at the same place as my videoclip.(videotracks 1 and 2). This results in a black screen. Changing tracks does not work.
When I place a title over a still image(photo-jpeg) then I see both title and image at the same time. Is this a problem with the trialversion?
or can't this be done in Elements. I know that in Premiere Pro this was possible.
What am I doing wrong?

I'm sorry, but I don't know enough about what you've done to tell you what you've done wrong.
But first, make sure you are in Timeline, not Sceneline mode.
Your video should be on the Video 1 track.
Position the CTI playhead on this clip and click on the "T" in the lower right of the Monitor panel to open the Titles workspace. Create your title.
The title will appear on the Video 2 track, at the position of the CTI, over your background video. You can also move it around and change its placement on the timeline if you'd like.

Install acrobatx mavericks does not work

after a clean install of mavericks, the installation of acrobat x from cs6 does not work. Indesign, photoshop and Illustrater where installed.
The error Code:
Exit Code: 6 Please see specific errors below for troubleshooting. For example, ERROR: DW006 ... - 0 fatal error(s), 4 error(s) Payload: Acrobat Professional 10.0.0.0 {AC76BA86-1033-F400-7760-000000000005}ERROR: DW006: Apple Package failed to install successfully. ERROR: Third party payload installer Adobe Acrobat X Pro Installer.pkg failed with exit code: 1 Payload: Acrobat X Pro 10.0.0.0 {E1C48031-9366-427F-AC04-535CEDAAD995} ERROR: DW006: Apple Package failed to install successfully. ERROR: Third party payload installer AcrobatUpd1011.pkg failed with exit code: 1
can someone help my?

I was tryin the things on this Lnk, they did not help.
I did an deinstalation of the creative suit cs6.
When reinstalling again, it did not install acrobat x.
The Log file was pointing to a P7 file, which could not be created.
The last lines of the log file:
1/31/2014 17:00:00.298 [INFO] Deployment.ProgressCommand Received Exit message from DE
1/31/2014 17:00:00.309 [INFO] ProvisioningNativeAppletBase Setting EULA for locale - de_DE
1/31/2014 17:00:00.314 [INFO] Deployment.DeploymentFinishCommand Sidecar file /Users/werner/Library/Application Support/Adobe/TrialSettings-Creative_Suite_6_Design_Standard.xml does not exist
1/31/2014 17:00:00.315 [WARN] Deployment.DeploymentFinishCommand Could not process sidecar file
1/31/2014 17:00:00.315 [INFO] Deployment.DeploymentFinishCommand Activation call was not made. DEExitCode:6 ModeIsTrial:false SIFAvailable:true RegisterLater:true UserProfile:true SupressActivation:false
It seems to be a problem of activation, but for the rest of the creative suite (ps, id, il) everything was ok.
any Idea, which can help me? Thanks

ORDS Template with parameter does not work

Hello everybody,
I can not get working a RESTful Service using the ORDS_SERVICES -API (ORDS version 3.0.0.343.07.58), same Query without parameter (hardcoded product_id) works fine.
declare
l_module_id number;
l_template_id number;
l_handler_id number;
l_parameter_id number;
begin
ORDS_SERVICES.delete_module(p_name => 'test_parameter');
l_module_id := ORDS_SERVICES.create_module(p_name => 'test_parameter',
                            p_uri_prefix => '/test_parameter',
                            p_items_per_page => 10,
                            p_status => 'PUBLISHED',
                            p_comments => null);
l_template_id := ORDS_SERVICES.add_template(p_module_id => l_module_id,
                           p_uri_template => '/demo_product_info_10/',
                           p_priority => 0,
                           p_etag_type => 'HASH',
                           p_etag_query => null,
                           p_comments => null);
l_handler_id := ORDS_SERVICES.add_handler(p_template_id => l_template_id,
                           p_source_type => 'MEDIA', -- source_type IN ('COLLECTION_FEED', 'COLLECTION_ITEM', 'FEED', 'MEDIA', 'PLSQL', 'QUERY', 'QUERY_1_ROW')
         p_source => 'select mimetype, product_image from demo_product_info where product_id = 2',
         p_format => 'DEFAULT',
         p_method => 'GET',
         p_items_per_page => null,
         p_mimes_allowed => null,
         p_comments => null);
/* now same result but with parameter */
l_template_id := ORDS_SERVICES.add_template(p_module_id => l_module_id,
                           p_uri_template => '/demo_product_info/{product_id}',
                           p_priority => 0,
                           p_etag_type => 'HASH',
                           p_etag_query => null,
                           p_comments => null);
l_handler_id := ORDS_SERVICES.add_handler(p_template_id => l_template_id,
                           p_source_type => 'MEDIA', -- source_type IN ('COLLECTION_FEED', 'COLLECTION_ITEM', 'FEED', 'MEDIA', 'PLSQL', 'QUERY', 'QUERY_1_ROW')
         p_source => 'select mimetype, product_image from demo_product_info where product_id = :product_id',
         p_format => 'DEFAULT',
         p_method => 'GET',
         p_items_per_page => null,
         p_mimes_allowed => null,
         p_comments => null);
l_parameter_id := ORDS_SERVICES.add_parameter(p_handler_id => l_handler_id,
                           p_name => 'product_id',
         p_bind_variable_name => 'product_id',
         p_source_type => 'URI',
         p_param_type => 'INT',
         p_access_method => 'IN',
         p_comments => null);
commit;
end;
The first template works fine:
http://localhost:8080/ords/xxx/test_parameter/demo_product_info_10/
shows a jpeg image of a wallet.
The second template does not work:
http://localhost:8080/ords/xxx/test_parameter/demo_product_info/10/
fails with error:
mapped request using: BasePathMapper [basePath=/xxx/] to: SCHEMA:apex|XXX
Choosing: oracle.dbtools.http.dispatch.DispatchMetaData as current candidate with score: MetaDataScore [score=0, matchedMethod= GET: {10299, false}
common: CommonMetaData [accepts=[], cors=null, documentation=null, frameOptions=null, pageSize=10, pagination=NONE, requiresPrivilege=null, transport=null]
, matchedPattern= /test_parameter/demo_product_info/{product_id}
common: CommonMetaData [accepts=[], cors=null, documentation=null, frameOptions=null, pageSize=null, pagination=null, requiresPrivilege=null, transport=null]
methods:
GET: {10299, false}
common: CommonMetaData [accepts=[], cors=null, documentation=null, frameOptions=null, pageSize=10, pagination=NONE, requiresPrivilege=null, transport=null]
stack trace:
oracle.dbtools.http.errors.InternalServerException: java.lang.IllegalArgumentException: INT
at oracle.dbtools.http.errors.ErrorPageFilter.internalError(ErrorPageFilter.java:165)
at oracle.dbtools.http.errors.ErrorPageFilter.doFilter(ErrorPageFilter.java:113)
at oracle.dbtools.http.filters.HttpFilter.doFilter(HttpFilter.java:44)
at oracle.dbtools.http.filters.FilterChainImpl.doFilter(FilterChainImpl.java:51)
at oracle.dbtools.http.cors.CORSFilter.doFilter(CORSFilter.java:35)
at oracle.dbtools.http.filters.HttpFilter.doFilter(HttpFilter.java:44)
I changed the add_parameter-call p_param_type => 'INT' to be p_param_type => 'STRING'
then error remains the same and strack trace says
oracle.dbtools.http.errors.InternalServerException: java.lang.IllegalArgumentException: STRING
at oracle.dbtools.http.errors.ErrorPageFilter.internalError(ErrorPageFilter.java:165)
at oracle.dbtools.http.errors.ErrorPageFilter.doFilter(ErrorPageFilter.java:113)
Could you please confirm and fix,
kind regards,
Tom

This is a guess, but I suspect that ords_services.add_parameter() is not required at all.
Also, your URL /demo_product_info/10/ should not have the trailing slash (according to your template URI).
For more information, I suggest you look here:
ords.3.0.0.343.07.58.zip\ords.war\scripts\migrate\core\ords_migrate.plb
The migration package will show what is usually done for templates that already exist within APEX 4.2. I checked my templates and the ones with URI variables {in-curly-brackets} contain no records in apex_040200.wwv_flow_rt$parameters.
-Kris

Synching contacts with Outlook does not work

I have a Mac (with the contacts application), an iPhone and an iPad as well as an iCloud account. Synching contacts between all 4 of them works perfectly. However, synching contacts with Outlook 2011 does not work anymore. It used to, then I had some trouble with the synching with the iCloud (due to the fact that I had to change the Apple ID from the one I use for iTunes to the one I use for the Cloud), and since then contacts do not replicate with Outlook anymore. I can deactivate and reactivate the synching in Outlook as much as I want, no change.
Any ideas? Thanks!

So it sounds like you have contacts from multiple mail accounts syncing to/from your iPhone. They will all appear there as long as their respective accounts are checked under contacts/groups(upper left of contact screen).
As far as contacts created on the iPhone, if you select Outlook as your default account for contacts, all contacts created on the iPhone will sync with Outlook. I'm assuming your Outlook syncs with an Exchange Server.
You could connect the iPhone to iTunes and sync all of your contacts to say, a desktop version of Outlook. You could then import that set of contacts into the Exchange version of Outlook.

Save a published Access services database site as a template with contents does not work

Hi
I have a Access site on the SharePoint. I wanted the site to be duplicated to another subsite, I then did the usual - save site as a template with contents and made a copy of it, however it does not work. I have been getting the error as stated below
error has occurred during report processing. (rsProcessingAborted)
Query execution failed for dataset 'Default'. (rsErrorExecutingCommand)
For more information about this error navigate to the report server on the local server machine, or enable remote errors
However, it works if I make a local copy and publish it to the subsite? How does access services work on SharePoint and why the template option can't be chosen.

Hi cally, check the following links for possible solutions:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/1e2b77ba-4cfa-4aa3-97e4-b7b39fbd46fd/error-with-ssrs-report-that-has-a-sharepoint-list-data-connection-ssrs-r2-and-sharepoint-2010?forum=sqlreportingservices
http://blog.mikehacker.net/2012/05/16/sharepoint-2010-access-services-reporting-with-sql-2012/
cameron rautmann

IPad with Verizon does not work in Alaska.

If you live in Alaska and considering an iPad with Verizon don't do it. It does not work anywhere in Alaska. I recently purchased an iPad while travelling in the lower 48. The Apple sales people displayed the Verizon coverage map which displays wireless coverage for the populated parts of Alaska but what they missed is that you have to change the map to the Verizon Pre-Paid coverage and look for purple colored areas. There are none for Alaska. The map defaults to Extended 3G coverage in Alaska but that does not apply to the iPad.
I was on the phone with one of their Pre-Paid support people and they confirmed no coverage for Alaska. By the way, the Pre-Paid phone support is at 888-294-6830 but that number is not accessible from Alaska. From Alaska you have to first call 800-922-0204, Option 6, ask to be transferred to the Pre-Paid support number. Verizon - Alaska is a state of the USA!!!!
So all I can do is use the thing via my home wireless network. I cancelled the data plan and will need to turn it back on when I again travel south. Looks like I should have stuck with AT&T. At this point I have to return the iPad and get one specific to AT&T.
DG

So I finally figured out how to access my Verizon account on their web site. There is actually a phone number associated with the account. My iPhone is with AT&T so the Verizon iPad is my first experience with Verizon. I looked for the plan you mentioned but don't see it. Can you provide more detail? What I currently have is what Verizon calls the "Prepaid Cellular Data" plan. That gets me 1GB of data per month and it automatially renews each month billed to my credit card. Is that the same? If so then the Extended 3G network does ot work here in Alaska.

Show/hide Menue with Alt does not work @ Ubuntu

The shortcut does not work with Ubuntu, nothing happens when I press Alt

The doubling is weird. I cannot produce that. Forgive the repetition, but stated a little differently, in normal mode start with the cursor on the desired center point, depress the left mouse button, drag out to any starting shape and position, then depress and hold down the ALT key. The shape should then reposition itself so that its center is the initial point you chose. Without letting up on either the mouse button or the ALT key, drag the mouse to get the shape and size you want. Now release the mouse button FIRST, and then the ALT key. If that doesn't hack it, you've got a more interesting problem and we'll do some more head scratching,

OWB x64 bit client installed with RDBMS does not work?

Similar Messages

Maybe you are looking for