PA30 - field "Bank Control Key" hidden for Brazil company code

Dear friends,
We are facing problem when we use PA30 to create a Personnel nr. for contry Brazil. We need to have the field Bank Control Key visible in the screen but only for other countries this is opened.
Does anyone knows the way to setup PA30 to have the field Bank Control Key opened in the infotype Bank Data where we can enter a specific content to Brazil ?
BR,
Alessandro

Hi,
In this table T588M you can make change to the fields in your infotype.
Hope it helps.
Regards,
Edoardo

Similar Messages

  • Different Bank charges GL account for two company codes with same COA

    Hi,
    While configuring OBXK ( Automatic GL account for bank charges)  , I see there is provision to enter only one GL account per chart of accounts.
    We have two company codes using same chart of accounts but different bank charges GL account. Please tell me how to configure this.
    Thanks,
    suresh

    Hi,
    Thanks Krishnan and Chandra.
    I agree with you it could be the same GL account for bank charges, but the business requirement is such that in one of the two company codes, bank charges are required to be tracked separately to be subsequently transferred to the other company code. This means two separate GL accounts are required for two company codes which needs to be configured in OBXK.
    Hope this clarifies my query further.
    thanks,
    suresh

  • Bank Control Key for Spain

    Does anybody know how the Bank Control Key works for Spain.
    The help on the field LFBK-BKONT is not that helpful.

    Hi,
    This is a key for checking the combination of bank number and bank account number. Permitted length, characters and other country information for Spain are :
    The bank key has eight digits (4 positions stand for the bank number + 4 positions for the branch), is numerical, and without gaps.
    The bank account number has 10 digits, is numerical, and without gaps.
    The control key has 2 digits and is numerical.
    The bank key, the bank account number and the control key are checked simultaneously.
    If an error message is displayed when entering bank data, you should check whether data has been entered correctly. Here's a sample.
    Country           Bank key         Bank account       Control key
    Spain              00120345            0000067890            03
    Hope this helps. I had copied this from a note long back and can look for the actual note if required.
    Cheers !

  • Common internal order for multiple company codes.

    Hi All
    Can I have one statistical internal order which can be used at more than on Company code where controlling is common for all company codes.
    Thanks in advance
    reg
    S. Habib Pasha.

    Hi Sasi
    Thank you.
    I understand that Internal orders are Company code depended.  but,  at out client business, they need same internal order at difference comapany codes which are under one controlling area.
    Just looking, whether is there any possibility for same.
    reg
    S. Habib Pasha.

  • Activation of Bank Control Key field (P0009-BKONT) in IT 0009

    Hi,
    We got a requirement to activate Bank Control Key field (P0009-BKONT) in IT 0009 for the Countries Barbados, Dominican Republic and Trinidad & Tobago.
    For activating this field, we copied a new screen for each country for IT 0009 and made the field P0009-BKONT as Standard in T588M (Screen Modifications). Updated the feature P0009 also.
    When checked IT 0009, Bank Control Key is not found. Again, we have added the entries for these countries in table V_T521A (Bank details: Relevance of special fields) by selecting Control Key as Relevant.
    Still no luck. Bank Control Key is not seen in IT 0009.
    Can someone help me by providing solution how to activate field P0009-BKONT for the above countries. Thanks !!

    Hi Sai,
    You mean system uses this new screen but you don't see the field on it?
    If this is npt the case and system does not select the right screen check the feature P0009 in PE03.
    Regards,
    Omid

  • Vendor Bank Details - Bank control Key for Spain

    Greetings,
    Can anyone tell me how to maintain the bank control key for Spain in the vendor master data? I can see that Spain uses the key to check the combination of bank number and bank account number, and it looks like the validation points to table BNKAIN. However, where do I get the two digit bank control key (from the vendor?), and how do I maintain it in the table (this table is buffered)?
    Any advice you have would be greatly appreciated, and I will gladly assign points for helpful responses.
    Thanks!

    Hi Eric,
    Thank you for your quick response. My problem is not location of the field itself, but rather on what data to use to populate the field. There is no input help for this field, and the system issues an error message every time I try to populate the field. We ran a trace and discovered that the system appears to be running a check against table BNKAIN. I think perhaps I need to maintain that table, but cannot figure out how to access the table to maintain the entries. Do you know how to maintain this table, or is there a specific bank control key that should be used for Spain?

  • Mass change for field Confirmation control Key in PO / SA

    Dear All,
    There is a need to do mass change in value for field Confirmation control Key in PO / SA. Some of them have PO history. If we have PO history system wont allow to change conf. ctrl key. Also since it is a production system we can not cancel previous po histories. This is in SAP 4.7 where we dont have mass change tcode for Scheduling agreements.
    Can we maintain the values thru table entries. like using se16n maintain entries check box. This option is greyed out. can we activate that & do this requirement.
    please suggest.

    hi Greetings!
    The confirmation control key can not be changed in the scheduling agreement if GR for item had already been posted. If the GRs can be canceled , it is possible to change the confirmation control in the SA item.
    Version 4.7 do not support Mass change of scheduling agreements, hence you have to either create a SCAT or BDC to perform the task.
    Gobinathan G

  • Bank Control Key

    Hi Experts - How does the Bank Control key(BKONT) entered in the vendor master affect the Direct Deposit output file. Can we specify '01' and send it to the checking account or '02' and send it to the savings account. Doesn't work in our case.
    Any input will be appreciated.
    Thanks
    Sam.

    Hi Sam,
    We had the problem whereby when we leave the field blank, the system defaults 01 even though the account may be an 02 for savings. When the bank receives the file, the item will reject and force someone at the bank to manually process the reject by pointing it to the correct account type. However the bank should be sending feedback in the form of NOCs (notifications of change) to let you know that the wrong acount type is being included on the item.
    We resolved the problem by making an entry in the field manditory using a user exit so that if someone accidently leaves it blank, that a hard error is received forcing them to make the correct entry.
    The user exit we used is SAPMF02K_001

  • Deactivate mandatory check bank account,bank control key

    For certain Italian customers we use payment method 'R' where it is only necessary to have a bank key and no bank account or bank control key. Unfortunatly SAP always asks for those 2 when you enter a bank key. In other words, you cannot only enter a bank key.
    We don't like to enter dummy bank data in order to get the data in without errors. Is there a way to deactivate the mandatory check on bank account and bank control key when you use payment method 'R'?
    Thanks in advance.

    Hi Tom,
    You can try to change the Field checks of the countries, but it will work for all applications of these data for the bank data for this country. See SAP Note 31203 ' Entry of bank data w/o bank number (bank code)' as a sample.
    I hope this helps you
    Regards
    Eduardo

  • Create new Bank Control Key !

    Hello ,
    I did not find how to create a new Bank Control Key . Can you help me .
    Thank you .

    Hi
    This field contains a key for checking the combination of bank number and bank account number.
    Use USA
    In the USA, this field determines whether you are dealing with a savings or checking account (if you do not enter a value, then 01 is taken as the default):
    01 Checking Account
    02 Savings Account
    03 Loan
    04 General Ledger
    In India this field specifies the bank account category of the employee. The account categories are defined as follows:
    10 Savings account
    11 Checking account
    Hope the information will be helpful for you

  • Vendor bank control key

    Hi,
    does anybody know the bank control key for italian banks.
    when I upload vendors containing italian banks information, it asks for a bank control key...and it is mandatory. I am thinking there will be a specific value for italy.
    Regards,
    Vijay

    okay i assumed it as already existing vendor with u ..
    BNKA -- FOR THE MASTER BANK
    T005-COUNTRY
    then look for control key in
    may be check this in table TIBAN for a particular entry .
    hope this helps ..
    regards,
    vijay

  • Can we assign 1 credit control for multiple company codes

    hi,
    sap gurus,
    good afternoon to all
    can we assign 1 credit control area for multiple company codes.
    if yes can any body explain the pro's and cons of the assignment.
    if no can any body explain the why?
    its urgent plz.......
    regards,
    balaji.t
    09990019711

    Yes Balaji,
    We can assign.
    Here the risk categiry and terms of one credit control area will be applicable to all company code.
    Credit Control Area
    Definition
    An organizational unit that represents the area where customer credit is awarded and monitored.
    This organizational unit can either be a single or several company codes, if credit control is
    performed across several company codes. One credit control area contains credit control
    information for each customer.
    Use
    Credit and risk management takes place in the credit control area. According to your corporate
    requirements, you can implement credit management that is centralized, decentralized, or
    somewhere in between.
    For example, if your credit management is centralized, you can define one credit control
    area for all of your company codes.
    If, on the other hand, your credit policy requires decentralized credit management, you
    can define credit control areas for each company code or each group of company codes.
    Credit limits and credit exposure are managed at both credit control area and customer level.
    You set up credit control areas and other data related to credit management in Customizing for
    Financial Accounting. For more information, see the Implementation Guide under Enterprise
    Structure   Definition or   Assignment   Financial Accounting and then Maintain credit control
    area. You assign customers to specific credit control areas and specify the appropriate credit
    limits in the customer master record.
    Thanks,
    Raja

  • Multiple credit control areas for 1 company code

    Hi experts,
    My client is using ECC6 version and they activated credit control area, as I know that 1 company code can have 1 credit control area and 1 credit control can be assigned with multiple company codes,. but in one of my client company code is assigned to 4 credit control area through
    u201CFinancial Accounting (New)- Accounts Receivable and Accounts Payable-Credit Management-Credit Control Account-Assign Permitted Credit Control Areas to Company Codeu201D-
    Can anyone let me know how this functionality will work? Any additional impact will be there when compare to 1:1 scenario? And what are the details we need to update in FD32 when we assign multiple credit controls for 1 company code.
    Regards
    babu

    Hi,
    The multiple assignemnet of credit control allows you to use multiple credit control for customers. Thus in FD32 you can use these assigned different credit control area and maintain the credit limit for each area.
    Regards
    Milind Sonalkar

  • F.01 - Trial balance for multiple company codes

    Hello SAP gurus,
    I am trying to use transaction F.01 to generate trial balance for multiple company codes. My ideal output is as follow:
    Company Code     GL account     Amount
    AAAA                  10000             200,000
    AAAA                  10001             100,000
    BBBB                  10000             500,000
    BBBB                  10001             300,000
    However, when I tried to run the report in ALV format, the report aggregate the total by GL accounts which is not what I want (see below).
    Company Code     GL account     Amount
    '****                      10000             700,000
    '****                      10001             400,000
    Do you know if it is possible to generate a trial balance broken down by company code and GL accounts in ALV format? If yes, how do I do that?
    Thanks,
    Cassandra Wong

    In the initial screen of F.01, if you select radio button 'ALV grid control' and select the layout as '1SAP' and execute, you will see the button Expand (Ctrl+F2) in the report - it is adjacent to the blue information button - you will see a + sign and the words 'Company Code' on that button.  Even if you are not able to locate the button, just press CtrlF2 on your keyboard, the list will expand.  You may not have company code in the layout - you can change it using the 'Change Layout (CtrlF8)' button and then by bringing 'Company Code' field from the Hidden Columns on the right to the Displayed Columns on the left.

  • SEPA file – how to create one file for multiple company codes

    Dear experts,
    My company has multiple company codes and they process automatic payments (F110) for multiple company codes in the same run.
    The company wants to generate one SEPA file for all company codes.
    In OBPM1  for SEPA format in the section ``Payment medium output devided by level of detail`` I unchecked everything (attached).
    OBPM4 for SEPA format is showing `` No separation of payment medium output``.
    Unfortunately, when I run automatic payments (F110) for multiple codes, multiple files for each company code are created.
    Can anyone let me know how it is possible to create one SEPA file that will contain payments for multiple company codes?
    Thank you

    Hi Zara,
    Please check in transaction DMEE your format tree (eg. SEPA_CT), 'DMEE tree: properties' - tab 'Sort/key field'. Is the Sort/key field 'ZBUKR' defined there with Level 1?
    Please follow the recommendation of note http://service.sap.com/sap/support/notes/1742584
    Regards,
    Emöke

Maybe you are looking for