Pacman always upgrading database
[root@drunken ~]# pacman -Syu
:: Synchronizing package databases...
core 33.4K 33.9K/s 00:00:01 [############################################################] 100%
extra 412.6K 27.6K/s 00:00:15 [############################################################] 100%
community 371.1K 28.8K/s 00:00:13 [##########################################################] 100%
pacman always syncronizes data base. Even after 1 min of pacman -Syu it still upgrades the data base. It worsk fine on the installation side, never downloads/upgrades the same package again, I mean it never upgrades the packages more than once system is updated, it is fine. Only the pacman's database of packages (core, community and extra) keeps on upgrading all the time. Earlier it used to say something like core datbase is up to date but now, from last 1 month I can upgrade data base 60 times an hour, anytime of day. Any solutions ?
Crows wrote:Is the mirror you're using http? I seem to recall that pacman needs ftp mirrors to be able to tell if the list needs updating. Http mirrors must be re-downloaded every time.
You got it right. Its last month I chanegd the mirrors to http. I made that change as rankmirrors shows the time for syncing as ftp = 3 x http , means it says http sync is in 1.8 sec but same ftp mirror syncs in around 3.8 or 5.76 sec. I don't know why pacman says so, but it is consistent in claiming so.
Similar Messages
-
Trying to open old iPhoto library on osx 10.9.5 with iPhoto 9.5.1. iPhoto says I must upgrade but upgrade eventually hangs. Tried to rebuild/repair database but it always says you have to upgrade database first and eventually hangs
What version was the old library made with?
What is the exact message? when it hangs does it crash or do you have to force quit?
LN -
Facing Parse Errors after upgrading database from 10g to 11g
Hi,
We are facing parse errors in the SQL's after upgrading database from 10g to 11g.
Kindly look into below parse errors.
********************************** Parse Error *****************************************************
Tue Aug 13 14:13:08 2013
kksSetBindType 16173533-2: parse err=1446 hd=3c73061fb8 flg=100476 cisid=173 sid=173 ciuid=173 uid=173
PARSE ERROR: ospid=15598, error=1446 for statement:
SELECT ROWID,ORGANIZATION_CODE,PADDED_CONCATENATED_SEGMENTS,PRIMARY_UOM_CODE,REVISION,SUBINVENTORY_CODE,TOTAL_QOH,NET,RSV,ATP,ORGANIZATION_NAME,ITEM_DESCRIPTION,INVENTORY_ITEM_ID,ORGANIZATION_ID,LOCATOR_ID,LOCATOR_TYPE,ITEM_LOCATOR_CONTROL,ITEM_LOT_CONTROL,ITEM_SERIAL_CONTROL FROM MTL_ONHAND_LOCATOR_V WHERE (INVENTORY_ITEM_ID=:1) and (ORGANIZATION_ID=:2) order by ORGANIZATION_CODE,SUBINVENTORY_CODE,REVISION, organization_code, padded_concatenated_segments
Tue Aug 13 14:13:10 2013
kksfbc 16173533: parse err=942 hd=3c387c4028 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
PARSE ERROR: ospid=29813, error=942 for statement:
Select feature from toad.toad_restrictions where user_name=USER or user_name in ( select ROLE from sys.session_roles)
kksfbc 16173533: parse err=942 hd=3c97d83648 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
PARSE ERROR: ospid=29813, error=942 for statement:
SELECT password
FROM SYS.USER$
WHERE 0=1
kksfbc 16173533: parse err=6550 hd=35185e4278 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
----- PL/SQL Stack -----
----- PL/SQL Call Stack -----
object line object
handle number name
319e277050 30 anonymous block
319e277050 57 anonymous block
PARSE ERROR: ospid=29813, error=6550 for statement:
BEGIN sys.dbms_profiler."146775420110782746251362632012"; END;
kksfbc 16173533: parse err=942 hd=3c142d8600 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
----- PL/SQL Stack -----
----- PL/SQL Call Stack -----
object line object
handle number name
319e277050 67 anonymous block
PARSE ERROR: ospid=29813, error=942 for statement:
SELECT 1 FROM plsql_profiler_data WHERE 0 = 1
Please help.
Regards
SureshHi Suresh,
Apologies for misunderstanding..
Tue Aug 13 14:13:08 2013
kksSetBindType 16173533-2: parse err=1446 hd=3c73061fb8 flg=100476 cisid=173 sid=173 ciuid=173 uid=173
PARSE ERROR: ospid=15598, error=1446 for statement:
SELECT ROWID,ORGANIZATION_CODE,PADDED_CONCATENATED_SEGMENTS,PRIMARY_UOM_CODE,REVISION,SUBINVENTORY_CODE,TOTAL_QOH,NET,RSV,ATP,ORGANIZATION_NAME,ITEM_DESCRIPTION,INVENTORY_ITEM_ID,ORGANIZATION_ID,LOCATOR_ID,LOCATOR_TYPE,ITEM_LOCATOR_CONTROL,ITEM_LOT_CONTROL,ITEM_SERIAL_CONTROL FROM MTL_ONHAND_LOCATOR_V WHERE (INVENTORY_ITEM_ID=:1) and (ORGANIZATION_ID=:2) order by ORGANIZATION_CODE,SUBINVENTORY_CODE,REVISION, organization_code, padded_concatenated_segments
Assuming you see the above error message in the alert log file, which was your original post, follow the below steps:
1 Get the 'ospid' value from the error
2. Issue the below command:
SQL> select request_id,ORACLE_PROCESS_ID
2 from fnd_concurrent_requests
3 where request_id = 15598;
3. After obtaining the request_id
4, Query it from the front-end using SYSADMIN responsibility
Hopefully this should get you the respective concurrent report/program.
Thanks &
Best Regards, -
Few questions about upgrading database
Hi everyone,
greetings of the day
I have few questions about the upgrading database,
In export and import mode
1.can we have new name for the target database,
2.I think we need to create tablespaces ,do we need to create users as well
3.If we are upgrading from 9i to 10g database ,any activity to be perfromed other than creating a new sysaux tablespace
4.How come we get consistent export
In DBUA mode ( in the same machine only)
1.Do we need shutdown / startup restrict the database
2.How can we move the files to the new location
3.Can we change db_name of the database
4.Can we use the old database as well
In manual upgration using catupgrd scripts
1.Can we rename the db_name
2.can we use old database as well
3.how to move the database files to the new location
4.can we perform this kind of upgrade on a different server
5.when we startup upgrade in the new home ,how it identifies the old database in-order to upgrade the old one
Thanksudayjampani wrote:
Hi everyone,
greetings of the day
Pl post details of source and target database versions, along with your OS details.
I have few questions about the upgrading database,
In export and import mode
1.can we have new name for the target database,Yes.
2.I think we need to create tablespaces ,do we need to create users as wellYou can create users, but it is not necessary. You need to pre-create tablespaces only if their characteristics/locations on the target are different than on the source.
3.If we are upgrading from 9i to 10g database ,any activity to be perfromed other than thisNot that I am aware of - see the steps in the Upgrade Guide - http://docs.oracle.com/cd/B19306_01/server.102/b14238/expimp.htm
4.How come we get consistent export wetherEnsure the database is started in restricted mode, so users will not be able to access the database during the export.
>
In DBUA mode ( in the same machine only)
1.Do we need shutdown / startup restrict the databaseNo - DBUA will do this automatically for you.
2.How can we move the files to the new locationYou can after the upgrade move the datafiles to wherever you want - use the ALTER DATABASE RENAME DATAFILE (http://docs.oracle.com/cd/B19306_01/server.102/b14200/statements_1004.htm#i2082829) command.
3.Can we change db_name of the databaseI do not believe this is possible with DBUA.
4.Can we use the old database as wellNo - the database will be upgraded by DBUA - there is no "old" database.
>
>
In manual upgration using catupgrd scripts
1.Can we rename the db_nameYes.
2.can we use old database as wellNo - the scripts will upgrade the database - there is no "old" database.
3.how to move the database files to the new locationSee above.
4.can we perform this kind of upgrade on a different serverPl elaborate on what you mean by this. You can copy the existing database to a different server (assuming compatible OS) and upgrade it there.
>
>
ThanksHTH
Srini -
I have the following:
Oracle 8 (8.0.5.2.6) Database running on a machine with Windows NT
And I want to accomplish the following:
Upgrade database to Oracle 9i (9.2.0.5) on a new machine running Windows Server 2003.
I am looking for advice on the best method to accomplish this considering that I am changing three variables: 1)the database version, 2)the operating system, and 3)the physical location of the database.
Thanks in advance for any advice anyone can provide.
JasonIt depends upon how you want to do the export and import. Whether a full database export or just the schema containing the data, etc. based on that you will have to create the 10g database and perform the import. Below are some relevant documents:
Oracle® Database Upgrade Guide
http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14238/toc.htm
Oracle® Database Upgrade Guide - Export/Import
http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14238/preup.htm#sthref67 -
How do you configure a WCF-SQL adapter to write data from a SQL2012 "always on" database?
Hi All,
I have a BizTalk environment. I have to write the data from BizTalk to the database which is configured using ALWAYS ON availability group.
I use WCF-SQL adapter to write the data. My question is this setup a supported?The answer is NO.
Refer: Can
I use a BizTalk WCF-SQL send adapter with a SQL 2012 Always on Database?
A snippet quoted below.
In summary (in order of preference):
Disable AlwaysOn Availability Groups / Mirroring on SQL server if you need to connect to this SQL server which has this enabled
Disable transactions and implement logic to be able to handle duplicates .
Disable transactions and handle the duplicates or lost messages with custom logic (e.g. Send twice and compare and implement error handling). You need to write your own DTC handling this which
is probably very complicated.
Disable transactions and live with risk of duplicates or lost messages without handling duplicates.
Refer: SQL Server AlwaysOn feature does not support MSDTC transactions.
Rachit
Please mark as answer or vote as helpful if my reply does -
Upgrade database from 10.0.2 to 11.2.0.2 .
I want to upgrade database from 10.0.2 to 11.2.0.2 . Can i go for direct upgrade?
Or i need to apply the patch bring the database to 10.2.0.2 and then upgrade to 11.2.0.2.
Please suggest me on this ...Are you sure about that minor release number? Possibly 10.1? Release 10.2.0.2 is the minimum R2 version that can be upgraded directly to 11gR2, if its 10.1, that requires 10.1.0.5 or higher.
The upgrade forum may offer better help, see Database Upgrade -
Hello there,
Previously, I had posted a thread on how to upgrade database from 10.2.0.5.0 to 11.2.0.3.0 through the wizards provided (GUI-based) and had successfully upgraded the database. Now, I am attempting to upgrade the database from 10.2.0.5.0 to 11.2.0.3.0 once more but this time, in silent mode (console-based). Unfortunately, I am lack of knowledge regarding the installation of the software and upgrading the database in silent mode.
I managed to figure out this much so far:
1 . Traverse through the installation directory to the directory shown below:
11.2.0.3 > Extracted > database > response
2 . Fill up the blanks of db_install.rsp file:
oracle.install.option=INSTALL_DB_SWONLY
SELECTED_LANGUAGES=en
ORACLE_HOME=C:\Oracle\11g\DBSwLoc
ORACLE_BASE=C:\Oracle\11g
oracle.install.db.InstallEdition=EE
oracle.install.db.EEOptionsSelection=false
oracle.install.db.isRACOneInstall=false
oracle.install.db.config.starterdb.memoryOption=true
oracle.install.db.config.starterdb.installExampleSchemas=false
oracle.install.db.config.starterdb.enableSecuritySettings=true
oracle.install.db.config.starterdb.control=DB_CONTROL
oracle.install.db.config.starterdb.automatedBackup.enable=false
oracle.installer.autoupdates.option=SKIP_UPDATES
3 . Save new db_install.rsp file to a new location (shorter path name without spacing will be best recommended)
4 . Traverse through the installation directory to where the setup file is located.
5 . Execute the following command:
setup.exe -silent -waitforcompletion -responseFile C:\db_install_updated.rspThe result I received is as shown below:
Starting Oracle Universal Installer...
Preparing to launch Oracle Universal Installer from C:\Users\...\Temp\OraInstall2012-12-13_03-16-43PM. Please wait ... [WARNING] - My Oracle Support Username/Email Address Not Specified
[SEVERE] - Provide the My Oracle Support password.
Please press Enter to exit...
Previously in the db_install_updated.rsp response file, I had set autoupdate option to SKIP_UPDATES but why does it still prompt me for the Oracle Support account?
Edited by: Maxwell T on Dec 13, 2012 4:05 PMAfter running the command below to upgrade the current database (Oracle 10.2.0.5.0):
dbua -silent -sid DB01 -oracleHome C:\Oracle\10g\DBSwLoc -oracleBase C:\Oracle\10g -diagnosticDest C:\Oracle\11g -sysDBAUserName sys -sysDBAPassword password -autoextendFiles -upgradeTimezone -commonFileLocation C:\Oracle\11g\DBSwLoc\oradata\database -recompile_invalid_objects true -degree_of_parallelism 7 -dbsnmpPassword DefaultPassword1 -sysmanPassword DefaultPassword1 This is the result:
Oracle recommends gathering dictionary statistics prior to upgrading the database. Refer to the Upgrade Guide for Performing Pre Upgrade
UPGRADE_PROGRESS : 0%
UPGRADE_PROGRESS : 4%
Upgrading Oracle Server
UPGRADE_PROGRESS : 5%
UPGRADE_PROGRESS : 6%
UPGRADE_PROGRESS : 7%
UPGRADE_PROGRESS : 8%
UPGRADE_PROGRESS : 9%
UPGRADE_PROGRESS : 10%
UPGRADE_PROGRESS : 11%
UPGRADE_PROGRESS : 12%
UPGRADE_PROGRESS : 13%
UPGRADE_PROGRESS : 14%
UPGRADE_PROGRESS : 15%
UPGRADE_PROGRESS : 16%
UPGRADE_PROGRESS : 17%
UPGRADE_PROGRESS : 18%
UPGRADE_PROGRESS : 19%
UPGRADE_PROGRESS : 20%
UPGRADE_PROGRESS : 20%
UPGRADE_PROGRESS : 21%
UPGRADE_PROGRESS : 22%
UPGRADE_PROGRESS : 23%
UPGRADE_PROGRESS : 24%
UPGRADE_PROGRESS : 25%
UPGRADE_PROGRESS : 26%
UPGRADE_PROGRESS : 27%
UPGRADE_PROGRESS : 28%
UPGRADE_PROGRESS : 29%
UPGRADE_PROGRESS : 30%
Collecting information from database
UPGRADE_PROGRESS : 31%
UPGRADE_PROGRESS : 32%
UPGRADE_PROGRESS : 53%
Modifying and starting Oracle instance
UPGRADE_PROGRESS : 58%
Copying database files
UPGRADE_PROGRESS : 60%
Switching database files
UPGRADE_PROGRESS : 62%
UPGRADE_PROGRESS : 63%
ORA-01167: two files are the same file/group number or the same fileORA-00202: control file: 'C:\ORACLE\11G\FULLCLIENT\ORADATA\DATABASE\LV01\CTRLLV01.ORA'Any suggestions for this error?
Thank you in advance. -
Utlrp.sql takes very long (8 hours) while upgrade database from 9i to 10g
1) Follow the note of 369693.1 ; and 362203.1 to upgrade database from 9.2.0.6 to 10.2.0.4 for e-business suite 11i (11.5.10.2)
2) utlrp.sql takes very long (8 hours), even the job_queue_processes > 20.
This is not acceptable for the upgrade in production environment which will take a long down time.
Appreciate that any one can share tips on this, our database is about 400 GB, 4 CPU on production.in which our database has about 40,000 packages and 28,000 Virews. With this number of invalid objects, it is ok that utlrp.sql takes this time.
using parallel worker of 4 for 2 CPUMake this 8 (4 * No. of CPUs). -
Pacman seg fault(Solved but with comments on pacman-db-upgrade)
Performed an install from FTP and booted into root login.
Performed pacman -Syu and received report system up to date.
Performed downloads via pacman of twelve packages including xorg and xfce4.
Performed download of abs package.
Downloaded abs repos.
Modified abs extra vlc package and performed pacman -U install of modified package.
Pacman working well at this point.
Rebooted.
After reaching xfce4 Desktop, attemptd to install firefox.
Pacman -S firefox produced..... /usr/bin/pacman/ report(forget the exact error)
Subsequent trials with ...pacman -U .... produces seg fault.
Cannot use pacman. All other programs seem to perform correctly. Perhaps have lost DNS.
Cannot perform ...pacman -Syu --debug.....segfaults.
Last edited by lilsirecho (2011-07-19 18:19:49)Solved the difficulty but have no idea what can be done to prevent it from occuring for another user.
It seems that the db did not get upgraded when the ...pacman-db-upgrade ...command was executed. There was no statement for ..."pre 3.5 db" upgrade....while executing the command.
After re-install, the upgrade command performed correctly and pacman now performs correctly after reboots.
The question comes up as to what to do if the upgrade command does not work correctly and whether some indicator of correct response should appear in the beginners guide. Additionally, what can be done in the event that the upgrade command fails to meet the correct response.
These questions will in time be resolved by a new .iso but the present exposure is amazing in its consequences!
Perhaps the upgrade command is also a function of properly synced mirrors but the command requesting the upgrade was ...pacman -Syy... the mirror sync function!
What do we have...catch22?
The resultant segfaults make sense if the pacman sync db is not upgraded.
How is a user to know the upgrade failed? What to do about such a condition?
Marking this thread as solved ...with comments... -
OS: OEL5x86
DB :11.2.0.3
Good Day,
I am trying to create the environment for my new upgraded database but I am getting an error..
/ora/oracle/proddb/11.2.0/appsutil/install/PROD_mobay/adcrobj.sh and /ora/oracle/proddb/11.2.0/appsutil/install/PROD_mobay/txkcreateACL.sh
subsequently failed stating the same error ORA-12705: Cannot access NLS data files or invalid environment specified.
---extract from autoconfig log-------
AutoConfig Profile Phase
Running Profile Process 1 of 1 for AppsUtil
Executing script in InstantiateFile:
/ora/oracle/proddb/11.2.0/appsutil/install/PROD_mobay/afdbprf.sh
script returned:
afdbprf.sh started at Thu Jan 23 12:14:45 EST 2014
The environment settings are as follows ...
ORACLE_HOME : /ora/oracle/proddb/11.2.0
ORACLE_SID : PROD
PATH : /ora/oracle/proddb/11.2.0/perl/bin:/ora/oracle/proddb/11.2.0/bin:/ora/oracle/proddb/11.2.0/perl/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/root/bin:.
Library Path : /ora/oracle/proddb/11.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/ora/oracle/proddb/11.2.0/ctx/lib
Executable : /ora/oracle/proddb/11.2.0/bin/sqlplus
SQL*Plus: Release 11.2.0.3.0 Production on Thu Jan 23 12:14:45 2014
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Enter value for 1: Enter value for 2: Enter value for 3: ERROR:
ORA-12705: Cannot access NLS data files or invalid environment specified
ERRORCODE = 1 ERRORCODE_END
.end std out.
.end err out.
Any Suggestions?
Regards,
Shridath.Please see:
AutoConfig is Failing with status 4 for a New Database with NLS Environment Error ORA-12705 (Doc ID 1612017.1)
DatabaseTier Autoconfig Errors ORA-12705: Cannot Access NLS Data Files Or Invalid Environment Specified (Doc ID 548916.1)
AutoConfig is Failing with status 4 for a New Database with NLS Environment Error ORA-12705 (Doc ID 1612017.1)
Thanks,
Hussein -
How to configuare database in oem after upgrading database.
Hi,
I upgraded database from 9i 10g. after upgrading database i removed database configuaration from oem. how to reconfiguarse databaseHi,
I am getting following error when configuare
oracle.sysman.emSDK.emd.comm.CommException: Received unexpected response text : <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD><TITLE>Error Message</TITLE> <META http-equiv=Content-Type content="text/html; charset=UTF-8"> <STYLE id=L_default_1>A { FONT-WEIGHT: bold; FONT-SIZE: 10pt; COLOR: #005a80; FONT-FAMILY: tahoma } A:hover { FONT-WEIGHT: bold; FONT-SIZE: 10pt; COLOR: #0d3372; FONT-FAMILY: tahoma } TD { FONT-SIZE: 8pt; FONT-FAMILY: tahoma } TD.titleBorder { BORDER-RIGHT: #955319 1px solid; BORDER-TOP: #955319 1px solid; PADDING-LEFT: 8px; FONT-WEIGHT: bold; FONT-SIZE: 12pt; VERTICAL-ALIGN: middle; BORDER-LEFT: #955319 0px solid; COLOR: #955319; BORDER-BOTTOM: #955319 1px solid; FONT-FAMILY: tahoma; HEIGHT: 35px; BACKGROUND-COLOR: #d2b87a; TEXT-ALIGN: left } TD.titleBorder_x { BORDER-RIGHT: #955319 0px solid; BORDER-TOP: #955319 1px solid; PADDING-LEFT: 8px; FONT-WEIGHT: bold; FONT-SIZE: 12pt; VERTICAL-ALIGN: middle; BORDER-LEFT: #955319 1px solid; COLOR: #978c79; BORDER-BOTTOM: #955319 1px solid; FONT-FAMILY: tahoma; HEIGHT: 35px; BACK
Thanks, -
User/Admin guide after upgrade database for recover db provided by Oracle?
Does anyone has a user/admin guide which is provided by oracle about using RMAN and how to use RMAN to RECOVER database tailor make for after upgrade database? I have been searching for a long time and don't find this document.
Anyone has this, please share.
FANLook in the Backup & Recovery section:
http://www.oracle.com/pls/db102/portal.portal_db?selected=4 -
How to configuare upgraded database in OEM?
Hi,
I upgraded my database from 9i to 10g. after upgrading database i removed 9i database configuaration from OEM. then i couldn't configuare upgraded database.only oracle 9i HOME is displaying in OEM when confiuaring database.
please help for this issue
Thanks,RAC on a single machine? Can't think of any other method than virtual machines.
Tim Hall has a good article for RAC using virtual machines on Linux here...
http://www.oracle-base.com/articles/10g/OracleDB10gR2RACInstallationOnCentos4UsingVMware.php -
Hi ,
Am getting ORA-01092 error while upgrading database to 10.2.0.1 from 9.2.0.6
I executed the catupgrd.sql successfully and recompiled invaild objects.
After that i tried to startup the database,but am getting the error:
sql>startup
oracle instance started
database mounted
ORA-01092 : Oracle instance terminated. Disconnection forced
I checked alert log file.
I am getting the following errors
Errors in file /u01/......./udump/VIS_ora/7179.trc
ORA-00604: error occurred at recursive SQL level 1
ORA-00607: internal error occurred while making change to a datablock
ORA-00600: internal error code, arguments [4194],[70] ,[39] [ ] []
Error 604 happened during database open . Shutting down database
instance terminated by USER pid =7179
ORA-01092 error Signaled during alter database open
Is there any block corruption? could u please share the solution for these errors?Hi;
You are hitting ORA-00600: error which mean you may need to work oracle support for your issue.Pelase check below note if its not help i suggest rise sr
Troubleshoot an ORA-600 or ORA-7445 Error Using the Error Lookup Tool [ID 153788.1]
Regard
Helios
Maybe you are looking for
-
Has anyone tried to use Elements 9 on their Mac and had problems?
Trying to use Elements 9 on my mac, but find that the create and effects editing part of the package are not working. Does anyone else have this problem?
-
64 bit or 32 bit - Boot Camp Windows
Hello, I am going to download the release candidate of windows 7 to run in boot camp and I am wondering if i should download the 32-bit version or the 64-bit version
-
Lose display when making a call...
I installed the IOS4 onto my 3GS phone and now when I make call I lose the display and can't get it back in order to see the number pad to dial an extension or even end the call. I have to press the power button twice in order to get the screen back
-
Is a power adaptor legitimate without a serial #
Purchased a USB Power Adaptor (5W for my iphone) from a seller on eBay. Looking on the back the model number was A1385 (all my others say A1265) and there was no serial number (all others I own have a serial number on them). There is also no green do
-
How can I get my Redemption Code and activate apps?
How can I get my Redemption Code and activate apps?