Page format for SAP-Script not working in 4.6C
Hi all,
I have a problem regarding check printing.
I am using SAP version 4.6C
The size of paper for check printing is
width = 231 mm
Height = 304 mm
So for this I have created a new page format with these details in SPAD.
Then I assigned this Page format to spool format and assigned that spool format to SAPWIN driver. I have assigned this page format to the SCRIPT that is used for check printing .
But when I am taking the print out for the check with new page format, the printer dont print till the end of page, it prints till the total amount on check and then stops there. So this creates an alignment problem when taking printout for multiple checks.
Please give some solution for this.
Regards,
Bharat.
I guess you are printing on dot matrix printer. If yes, try to do some physical printer settings for the dot matrix printer by following the printer manual. I guess you have to change the page size.. or set default printer settings... it may help you to solve your problem...
if not goto your device types tab in SPAD and select device types.. select your device from the list (for ex, SAPWIN) click format and goto the format that you have inserted for this device types.. double click on your format, you will see printer Indialization.. try to write code like this
set page length to 8.5 inch (=52 lines at 6 LPI)
\e\0x43\0x44
Note the above hexa decimal value can be obtained by going through the printer manual.
Close the thread once your question is answered.
Regards,
SaiRam
Similar Messages
-
Why is the Pages app for iPad Mini not working?
For the last few days I have been having major issues with the word processing application Pages for the iPad. It is taking a very long time to show me my documents, then it takes just as long to open up documents. Then when it finally opens up the document I have selected; the entire functionality is extremely slow and sluggish.
I turned the iPad on and off several times to see if that would help. I deleted the pages app. I even freed up some extra space on the iPad. None of these things have resolved anything.
If it is at all relevant I am using the most recent version of Pages (especially since I re-downloaded it). I am also using the latest version of iOS 8 on the iPad. My iPad is synched to iCloud. I have a maximum storage capacity of 20 gb (to which I have only used 675 kb). I am using the first generation iPad Mini (which is the very first iPad mini)
What could be the problem?
Should I reset the factory settings of the entire iPad? I'm at a loss of how to resolve this.The problem may be due to slow internet access to icloud where the document is being stored and saved.
Try creating a new document which is not on iCloud to see how the performance is. -
How to add a page in the SAP Scripts
Hi All,
I want to know how to add a page in the sap scripts. there is already sap script developed by some other person.
Now I have to add a page in front of that and have to add some more data.I added a page in page windows but thats not at all working.
Please help me out in this.
Thanks,
Praveennew page will create in sap scripts using new page command.
you have to set condition like after some number of records displayed in page new page has to be trigger.
ex:YOU HAVE SO MANY RECORDS FOR PRINTING BUT YOU WANT TO DISPLAY 100 RECORDS IN FIRST PAGE REMAINING IN SECOND PAGE LIKE THAT.
Here you can use NEW PAGE COMMAND .
IT IS OPPOSITE PURPOSE OF PROTECT AND ENDPOTECT.
Reward if useful. -
Need to add a new page in the SAP Script as last page
Hello,
I need to add a new page in the SAP Script as last page.
Currently I have three pages in the form(FIRST,NEXT,LAST). For this I created one more page END.
FIRST page next page is NEXT
NEXT page next page is NEXT
LAST page next page is LAST
END page next page is END.
I used NEW-PAGE END in the main window but it is not working and also I trired with CONTROL_FORM this also not working.
Thanks,
Ravi.Hello,
I need to add a new page in the SAP Script as last page.
Currently I have three pages in the form(FIRST,NEXT,LAST). For this I created one more page END.
FIRST page next page is NEXT
NEXT page next page is NEXT
LAST page next page is LAST
END page next page is END.
Create the text element in the main wondow of your form
/E ENDPAGE
/: NEW-PAGE END
and call the element from your print program by using write_form, where you want the END page in your print.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ENDPAGE'
EXCEPTIONS
element = 1
window = 2.
Thanks,
Ravi. -
I m new for SAP script can anyone tell me step by step
hi
i m new for SAP script can anyone tell me step by step.
how i can work with sap script and how can i call report programe by sap script
thanks .Hi laxman,
Follow these steps
Goto transaction code Se71
then give a name starting with Z r Y to create a new script then
1) create header data and basic settings
2)Pages u have to give ur pages number in character format only
3)window here u have to create windows for different variables such as for logo and etc., there will be a default window named as main mindow in this now u have to add new window for that
4)Page windows to add page windows follow these steps
goto edit option in the toolbar and select CREATE ELEMENT from which u can add already above declared windows
5) paragraph formats Here u have to define allignments and all for u proper display
Ex: A1, AF ....
6)Character formats here u have to declare the character format depending on u requirement such as times ne roman etc.,
After craeting all these press F9 so that u will be directed to coding part where u have declare the coding according to ur requirement
Regards,
Pavan -
Lion - 2004 MS Office for Mac will not work
My 2004 version of Microsoft Office for Mac will not work in Lion. I suspect because this is a PowerPC application. My question is this:
Is there any program out there which will map the PowerPC to an Intel format? Other than trying to seel more products, I am surprised that Apple does not supply a mapping program for products made by Microsoft for the Apple devices.Eric, can you tell me where please? It's not mentioned on the Lion compatibility pages at all. (http://www.apple.com/uk/macosx/what-is/compatibility.html) nor on the 'how to upgrade' page (http://www.apple.com/uk/macosx/how-to-buy/)
-
Where to find Crystal Report Formats for SAP B1 8.8 (India Localization) ?
Hi Experts,
do anybody knows Where to find Crystal Report Formats for SAP B1 8.8 (India Localization) ?
For example
Sales Register
Purchase Register
Journal Register
Sales Analysis - Crystal Report
Purchase Analysis - Crystal Report
Check Register - Crystal Report
Production register
Pending Sales Order
Outstanding Receivable
Outstanding Payable
BankBook
CashBook
General Ledger
BP Ledger (Customer / Supplier)
Trial Balance
Balance Sheet
Profit & Loss Statment
Cash Flow statment
Excise reports
RG 23 A Part I
RG 23 A Part II
RG 23 C Part I
RG 23 C Part II
Daily Stock Account
RG 1
ER 1
etc....
Documets Layout
Incoming Payment
Outgoing Payment
Journal Entry
Transaction Journal Report - Crystal Report
Sales Quotation
Sales Order
Sales Delivery
Sales Return
Sales Invoice (A/R Invoice)
Purchase Order
Goods Receipt PO
Purchase Goods Return
Purchase Invoice (A/P Invoice)
Inventory Transfer
Inventory - Goods Receipt
Inventory - Goods Issue
Best Regards,
Samir GandhiHi Neetu,
Do you wish that at all customer site all concern involved in implemtation do the same work ?
I believe ERP is meant for single entry system, and it should be true for implementation also, why to invest man hours for the same task ?
I expect it standard reports should be released by SAP, so that speed of implementation improve, we have more nos. of satisfied customers.
customised reports is all together different and it is understood that it is needed to be developed after study the exact requirement.
Best Regards,
Samir Gandhi -
How to put Page break in SAP Script
Hi Experts,
Please tell me how to put page break in SAP Script. or give some sample code
looking forward for your reply..
Regards,
Kali PramodHi,
NEW-PAGE is used to insert a page break ,
it can be conditional if used between IF..ENDIF
e.g. /:IF &KNA1-NAME1& = 'XYZname'
/:NEW-PAGE
/:ENDIF
If u want to Page break after displaying certain records or after some condition you use NEW-PAGE
reward if useful. -
Purpose of RSTXTRAN program for SAP-Script ?? ??
Purpose of RSTXTRAN program for SAP-Script ?? ??
when it is required to run that program ?Hi sarit,
Purpose of RSTXTRAN program for SAP-Script Transfer of SAP script Texts to a Correction.
The report RSTXTRAN allows a set of SAP script texts (or the text key) to be transferred to a correction or repair of the transport system. The name of the correction/repair can either be transferred as a report parameter, or the correction/repair can be selected later in a selection window. The text key can be qualified generically using the asterisk character (*).
When the report has been executed, the list of selected texts appears. Individual texts can be deselected in this list. When the function "Continue" is executed, the final list of texts which are to be transferred is displayed. The transfer of texts to the correction/repair can now be activated by the appropriate function, and must be confirmed in a dialog box.The requirements for this as follows.
There is a correction/repair in which the selected text keys can be entered, if it is not being processed. The report can only insert text keys in corrections or repairs, not however in transport requests. However, the objects contained in a correction can be transferred to a transport request with the correction and transport system transaction.
It should also be noted that the report selects texts in the current client, but that the transport system generally exports texts from client 000.
When the report has been executed,the output can be a list of the selected texts. Information about whether transfer to the correction/repair was possible is displayed for each text key.
Reasons for failed transfer include
o the correction/repair is currently being processed
o the correction/repair does not exist
For Example
All German standard texts with the ID ST, whose names begin with SAPSCRIPT, are to be entered in the correction B20K009999. The report parameters are then assigned values as follows:
o Correction: B20K009999
o Text object: TEXT
o Text name: SAPSCRIPT*
Thanks,
Usha -
I purchased PSE 13 but have a Vista OS. It was suggested in this chat room that I download PSE 12. I did that & installed 12.
The serial # for 13 does not work. Any thoughts on how I can get a serial number for PSE 12?Hi
There is a newer version of Resolution+ Plug-in released for an Qosmio X series
[Resolution+ Plug-in v 1.1.2004|http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory =2&selFamily=381&selSeries=231&selProduct=7506&sel ShortMod=null&language=13&selOS=all&selType=400&ye arupload=&monthupload=&dayupload=&useDate=null&mod e=allMachines&search=&action=search&macId=&country =all&selectedLanguage=13&type=400&page=1&ID=82406& OSID=30&driverLanguage=42]
try it out...
If it has not been installed properly, try rebooting your computer and reverify. -
Book For SAP SYCLO Agentry Work Manager 6.0
Hi Expert's,
Can any one suggest me the book for SAP SYCLO Agentry Work Manager 6.0 , Which covers End-To-End Implementation methodology?
Answer appreciates.
Thanks
Rag
Tags edited by: Michael ApplebyMoved to SAP for Mobile. Application related, not SMP.
Regards, Mike (Moderator)
SAP Customer Experience Group - CEG -
Early Adopter release : Extract DDL for tables does not work
Hi,
just had a look at Raptor - really nice tool - easy install - could be a replacement for SQLnavigator for us. One or two things I noticed though ...
1)
Export->DDL for tables does not work throws following error
java.lang.ClassNotFoundException: oracle.dbtools.raptor.dialogs.actions.TableDMLExport
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at oracle.ideimpl.IdeClassLoader.loadClass(IdeClassLoader.java:140)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:164)
at oracle.dbtools.raptor.dialogs.BasicObjectModifier.launch(BasicObjectModifier.java:142)
at oracle.dbtools.raptor.dialogs.BasicObjectModifier.handleEvent(BasicObjectModifier.java:210)
at oracle.dbtools.raptor.dialogs.actions.XMLBasedObjectAction$DefaultController.handleEvent(XMLBasedObjectAction.java:265)
at oracle.ide.controller.IdeAction.performAction(IdeAction.java:530)
at oracle.ide.controller.IdeAction$1.run(IdeAction.java:785)
at oracle.ide.controller.IdeAction.actionPerformedImpl(IdeAction.java:804)
at oracle.ide.controller.IdeAction.actionPerformed(IdeAction.java:499)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1849)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2169)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
at javax.swing.AbstractButton.doClick(AbstractButton.java:302)
at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1000)
at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:1041)
at java.awt.Component.processMouseEvent(Component.java:5488)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3126)
at java.awt.Component.processEvent(Component.java:5253)
at java.awt.Container.processEvent(Container.java:1966)
at java.awt.Component.dispatchEventImpl(Component.java:3955)
at java.awt.Container.dispatchEventImpl(Container.java:2024)
at java.awt.Component.dispatchEvent(Component.java:3803)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
at java.awt.Container.dispatchEventImpl(Container.java:2010)
at java.awt.Window.dispatchEventImpl(Window.java:1774)
at java.awt.Component.dispatchEvent(Component.java:3803)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
and 2)
when I click on a package body - I get "loading ..." below it but it never puts the
procedure names in and the "loading ..."message stays in the tree view - however you do get to see the packages in the source window.
Realise this is very much a work in progress and am grateful to see an early release such as this. Looking forward to the production release.
Best regards,
David.OK thanks for looking ....you've obviously got the fixes on your to do lists
Noticed that the SQL tab when you select an object works fine - displays the
DDL for the object
Do you think you'll have functionality so you can select many objects (shift left click) and
then create a DDL script for them? It looks like you can do this for all objects in a schema but
the ability to select a subset of objects in a schema would be very useful for our DBA's.
Couldn't see any good reason for keeping using SQLNavigator
Many congratulations on producing such a useful tool.
Kind regards,
David. -
Translating for SAP Script in ECC 6.0
Hi All ,
How we can do the transalations for SAP Script in ECC6.0? . I was not able to do as we do in 4.7 version where we follow the following path
Translations -> Long texts -> forms .
Can any ody help me inthis regard ?
Thanks ,
Dharma .Hi Anirban,
I tried that way . When I entered Scripti name in the filed " Object Name" , it is giving warning message "Object not found"( actaully it is existing ) . Even i tried to select by F4, No thing I Could find .Transactional area defaultred to 999999( tried wiht blank also) .
Can any body help for any alternative ?
Thanks ,
Dharma . -
Printing problem for SAP Script
Dear Friends,
I am facing strange problem for SAP Script. In the billing document output the sold to party and ship to party address are displaying. When user print the billing document on laser printer it print the Country for Sold to and Ship to. But when it print the same billing document on normal printer (other than laser) the Sold to country not printing.
The print preview of billing document in SAP correctly display country for Sold-to and Ship-to.
I have recently make changes in the SAP Script form (Address window) to display country for Ship-to which was never displayed before. I have added FROMCOUNTRY option after COUNTRY in address window. COUNTRY will be Ship-to and FROMCOUNTRY will be VBDKR-SLAND.
Can any one help me to solve this problem.
Regards
Nilesh SheteUsed custom address print option instead of using ADDRESS
-
The Help Tab (OSX ML) where you search for something does not work
If I click "Help" and then search "expand" it will show me where expand is. But in CS6 when I clicked it the command would go through and pull up the page to expand pixels. Instead, I have to go find it. It works in every other Adobe app I use except Photoshop CC.
I am on the latest version and on CCHi Peter
Thanks a lot for your help (and sorry for not having answered quicker, but my boss gave me a more urgent task last week...).
Anyway, I did what you suggested (re-importing into a brand new project), and then the search for synonyms really worked! But, being a sceptical person, I did the same with another project, and with that one, it did not work. So, what I did next was compare all the settings of these two projects, and I found a difference.
RH8 now contains a function that's called 'Teilzeichenfolgensuche' (I don't know the English expression, but have a look at the attached picture: this is a screen shot from the second page when I generate WebHelp). After having done several tests, I came to the following conclusions:
Search for synonyms does not work in HTML-Help, but it does work in WebHelp (and maybe others, but they are not relevant for me, so I did not test them);
Search for synonyms does only work, when the function 'Teilzeichenfolgensuche' is NOT activated.
Could maybe somebody test this, too, and post here whether my conclusions are really correct?
Btw: This fact is not mentioned in the RH-Manual; actually, this function 'Teilzeichenfolgensuche' is not even mentioned there (at least not in the German edition)!!!
Can hardly wait to see your feedback; thanks again for everybody's support!
Kurt
Maybe you are looking for
-
How do I copy an iTunes playlist to another apple ID on the same computer?
My daughter has created a playlist in my iTunes and I'm trying to copy that into her iTunes via Home Sharing. Is that possible?
-
How can I have multiple WINDOWS (NOT tabs) with INDEPENDENT content?
How can I have multiple '''windows''' (''not ''tabs) with '''independent''' content? I used to be able to open separate windows with Firefox, and the content could be completely different in each window. No matter what I did in any window, no OTHER w
-
i have a mac book pro and a i-pad 2. both of the devices have the same apple id and same mailing adress. if i want to make a face-time call from my mac book to i-pad 2. how can i do that?
-
Differences between standard and pro versions
I was reading the comparision of these two Acrobat versions and for Pro it says: Edit and enhance photos to add to your PDF communications with Adobe Photoshop® CS5. Quickly transform static PowerPoint slides into compelling, interactive PDF presenta
-
Hi! I have a JSlider and a JTextField. I would like them to "update" eachother... When the user is changing the JSlider, I need the String in the JTextField automatically to update the recieveing data from the JSlider, and vice versa. I dont know how