Pages to EPUB: Table of Contents displaying FIRST?

I saw this question posed earlier, and no solution was raised.
Does anyone know why my TOC is displaying FIRST when I export to EPUB, instead of behind the Title and Copyright pages, as I have it set on the pages document?
Thank you!

Same here. Very annoing, and I cannot find any way to fix this.

Similar Messages

How do I get to the second page of a table of contents?

I have purchased several books that are long enough that their interactive tables of contents require more than one page. I have not been able to figure out how to get to the second or subsequent pages of the table of contents. Tapping or swiping the right side of the page does not advance the page as it does within the book itself, and it does not scroll down as though it were a long one-page list. Tapping on the table of contents icon again does not advance to the next page either. How do I change pages of a table of contents to select a chapter or book beyond the first page of the contents list? This is not addressed in the User's Manual.

No, sorry.

How can we print the page numbers for TABLE OF CONTENTS form When its excluded from the form page count ?

Hi Experts,
We have TABLE OF CONTENTS followed by 100 forms with totally 215 pages.
We have checked in the Exclude from form page count option for TABLE OF CONTENTS form in Group level.
The forms followed by TABLE OF CONTENTS form all are using FORMSETPAGENUM rule in footer.
the very first form followed by TABLE OF CONTENTS form the page number starts at 1 of 215 and the last form ends at 215 of 215.
Now i want to print the Page number for TABLE OF CONTENTS form alone.
How can we do that ? Any thoughts ?
Regards,
RAMAN C

Hi Raman,
I guess, you have included 'Exclude Page Count' option in Table Of Content (TOC) form.
There is a limitation in studio. The page number functions (FORM PAGE NUM OF/ FORMSET PAGE NUM OF) will be ineffective when we select the 'Exclude Page Count' option in TOC form. Hence, you was not able to print the Form Page Count in TOC form.
The only way to print page count is to deselect 'Exclude Page Count' option. Then you can normally print the TOC Page Count in TOC form. However, thiS TOC page count will add to the Total formset Page Count. The Formset Page Count can be controlled through Postransdal using the script [FORMSET PAGE NUM = TotalPages() - 1]
Regards,
Mahesh

Table of Contents displays in wrong order

I created and generated a Table of Contents, and am having a weird issue.   It's a 19-page document, and Table of Contents is set to display Headings 1 and 2. Everything went fine, except that on one page the Heading 1 on top of the page displays in the Table of Contents below the Heading 1 level below it - i.e., they're in the wrong order!
So, on the page its -
9       Text
10     Text
But on the Table of Contents it returns -
10     Text
9       Text
Any ideas about why it might be doing this?

It can't be! If "9. Text" and "10. Text" use the same list for auto-numbering and "10" is below "9" on the same page, Indesign can't generate such, unless you don't copy the numbering to the TOC and instead add numbering via TOC style. Check your TOC style settings.

Add pages before the table of content into the table of content

Hey,
I was wondering if someone can help me. I'm writing my dissertation and I have to include an abstract and acknowledgments before the table of content ( written on pages 1 and 2). How can I get pages to include these pages within the table of contents written on page 3?
Thanks
Ordidge

You can't get it in the TOC automatically. You can do it manually but you'll loose the updating feature of the TOC so do it when you are certain you are finished with the document.
What you do is copy the whole TOC and paste it in Textedit. Here you can do all the changes you want. Copy it again and paste it back in the Pages document.
Also read this
http://support.apple.com/kb/TS2127?viewlocale=en_US

Pages 5.5 table of contents not showing after formatting to ePub

Im currently trying to format my pages version 5.5 document to ePub. My goal is to use the created document in iBooks. I have downloaded the ePub best practices template from the relevant apple help pages and followed the guidelines. However when opening the document as an ePub file via iBooks the table of contents is non existent. Any advice would be greatly appreciated. Thanks in advance.

All the documentation I have read for created EPUB are to export XHTML, rather than DTBook. I'm not sure if it follows the same rules as EPUB for XHTML.
Assuming it does, you need to do two things: (1) Create a TOC Style (not just a Table of Contents) in the Layout menu. (2) When in the Export EPUB dialog > Contents panel, specify the TOC Style you created.
In an "normal" EPUB 2.01, that would do two things: It would create a navigational TOC shown in every EPUB reader, and it would leave the TOC you placed on your page as an internal TOC.

Table of contents displays incorrect title

Hi everyone, I'm using iBooks author for a class project...As I think you can see clearly in the screen shot attached, the Table of Contents (the large picture on the screen) has not updated to display the proper chapter title that I've entered in the chapter's title page (viewable on the left). This only happens for chapter 1, my other two chapters are correct in the TOC.
Any ideas?

Again...not working.
See the note that says
"Please add the image directly by clicking Insert Image (camera icon). We cannot accept linked or embedded images." ...?
That means save the original to your hard drive, then make a reply, tap the little camera icon, then find that compatible file, then add. Which version Safari on which OS X are you using?
See this?
...that's ampicillin.

Include Master Page Items in Table of Contents

I am building a table of contents in InDesign CS3. I've got paragraph style applied to my section heading and well as section subheadings. However, my sections headings are located on Master Pages (as they are repeating on several pages), and my section subheadings are located directly on the pages themselves (as they do not repeat).
When I set up my table of contents only my section subheadings show up, not both. When I go to a page with a section heading and override the master page item and then update my table of contents my section header shows up. Is there any way to include my secion headers without overriding the master page items?
-Carina

I found this article about using Power Headers to override master frames that addresses the table of contents issue: http://in-tools.com/article/power-headers/power-headers-overrides-master-frames/
Hope this helps!

Page ranges in table of contents in CD2

I am using CS2. I am working on a directory, and we are putting in an alphabetised listing table of contents.
Some of the listings are on more than one page, so I end up with two entries with two different page numbers, like this:
read this heading 16
read this heading 17
What I want is:
read this heading 16-17
Is it possible to get InDesign to do this, or do I need to manually edit the ToC after we generate the final version?
Thanks.
Liz

The ToC cannot do this. The index can, though. So, unless you also have an index in your document you could mis-use that to build your toc.

EPUB-Table of Contents

Does anyone know how to make the table of contents the navigation system for their epub?

You need to take step back and do a little research.
I suggest viewing Anne Marie Concepcion's videos on Lynda.com for a start. This link will get you a one week trial: http://bit.ly/fcGpiI
Bob

SSRS 2008 R2 report does not print the page header for a html content displaying on multiple pages

Hi
I need to display the html content from the database. The html content are quite long and can have content of 3-5 pages. Issue I am facing is f the record has html content of 3-5 pages, then it does not print the page header (which is a separate tablix) on
second page onwards.
Nikesh Shah
Nikesh Shah

Hi Nikesh,
According to your description, I’m not sure the meaning of Page header in your scenario. In Reporting Services, a page header that run along the top of each page, respectively. Headers can contain static text, images, lines, rectangles, borders, background
color, background images, and expressions. But we couldn’t add tablix in the page header.
If you are saying report header, a report header consists of the report items that are placed at the top of the report body on the report design surface. They appear only once as the first content in the report. So it cannot repeat in other pages.
If you are saying tablix header, freezing column headers are different in table and matrix. For more details, please refer to the following thread:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/c8ddc1af-1bdf-4e72-8aab-0353c7cc848a/ssrs-report-freezing-row-and-column-while-scrolling-issue?forum=sqlreportingservices
If there are any misunderstanding, please elaborate the issue for further investigation.
Regards,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Code page issue - Unix file(s) content display in a report output

Hi All,
I am trying to retrieve file from Unix server and display in my report output.
I have written code as below:
OPEN DATASET filename FOR INPUT IN TEXT MODE ENCODING DEFAULT.
DO.
READ DATASET filename INTO i_tab-line.
ENDDO.
CLOSE DATASET.
1. Now i am able to display files of type .txt in report output but with line numbers above each line.
How can i avaoid it! I want to display as it looks in AL11 view.
2. If i am displaying files of type .PDF it is giving dump with below message:
A character set conversion is not possible.
At the conversion of text from code page '4110' to '4102' is not possible.
- a character was found that cannot be displayed in one of the two code pages;
- or it was detected that this conversion is not supported.
How can i display the .PDF (or) all types of files in my report as it is viewable in AL11.
Can anybody solve this this.
I have tried UTF-8 & NON-UNICODE options with ENCODE also they are also giving same dump.
Can anybody resolve these issues!
Thanks in advance.
Thanks,
Deep.

Hi All,
Any resolution for above posted issue!
Thanks,
Deep.

Problem with ePub Table of Contents

In converting to ePub format, I end up with the TOC out of sync. For instance chapter 1 in the TOC actually points to chapter 2, chapter 2 to 3, etc. When I make a PDF from the same file, everything is OK. Even in the Pages document the links work as expected. I have looked at the ePub file in the iPad, and other readers and in every instance the TOC is one chapter off.

I have converted serveral files using the ePub template and each one acts the same when I import them into my iPad - chapter 3 points to chapter 2, chapter 2 points to chapter 1, etc. I can upload the file. Should it be the Pages file or the ePub file? Also where do I upload the file?

Table of contents - title creates automatic page break

I want the title "Table of Contents" to appear above the automatically generated Table of Contents in pages. The TOC covers 3 pages (it's a long document) and I've formatted it and am happy. However, the title for the page which reads "Table of Contents" makes the TOC jump down to another page leaving the title on an otherwise blank page. I have tried re-typing the title, ensuring no page breaks are on the page. I've deleted the TOC and reinserted it at the appropriate place etc. But it keeps jumping down and starting on a new page. Any advice appreciated. I want to the keep the title "Table of Contents" on the same page as the table of contents themselves.

I am having the exact same issue. Long ToC (3 pages), but cannot place a simple headline above it. It automatically breaks the pages and starts on a new page. Any ideas people?
Please see the picture below. I cannot find a way to narrow down that gap between headline and ToC.
Cheers Phil

Organize Table of Contents by alphabetical order in Pages

Hi,
Is it possible to organize a table of contents by alphabetical order in pages?
Thanks!

Pages inserts a Table of Contents in page order, that is what a T.O.C. is.
You want an Index.
Export the T.O.C. to Text.
Open that text file in a Word Processor that allows sorting* and sort it into Alphabetical order.
Copy that sorted Index back into Pages.
Peter
* Pages will do this if you install WordService [free] from DevonTechnologies

Pages to EPUB: Table of Contents displaying FIRST?

Similar Messages

Maybe you are looking for