Parameters don't pass

Hi,
I 've got a problem with the parameters when passing them from Forms to reports. I don't known why, but sometimes it runs ok, but not always.
When it doesn't run, I pass a copy of the parameters directly to the report and it runs ok.
I don't understand it, please help me...
Thanks.

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Carlos Ruiz ([email protected]):
Hi,
I 've got a problem with the parameters when passing them from Forms to reports. I don't known why, but sometimes it runs ok, but not always.
When it doesn't run, I pass a copy of the parameters directly to the report and it runs ok.
I don't understand it, please help me...
Thanks.<HR></BLOCKQUOTE>
A mi me ocurris algo similiar cuando los parametros incluyen comillas simple '
Check the parameters include character '
good luck
null

Similar Messages

  • Parameters are not Passed in a Struts(JPDK) Portlet

    Dear All,
    I am getting below problem in Oracle Portal Environment(10.1.2)
    I am passing news_id parameter along with title from one page to another page like below code
    In CompanyNewsShowPage.jsp
    <tr>
    <td class="desc">
    <%
    page_url ="/showpageNews.do?news_id="+com_events[0];
    // System.out.println("value of page url : "+ page_url);
    %>
    <input type="hidden" value="<%=page_url%>" id="hdnpageurl"/>
    <pdk-html:link page="<%=page_url%>" styleClass="desc">
    <%
    String obj_title= com_events[1];
    if((obj_title.length())>30)
    out.println(obj_title= obj_title.substring(0,15)+ "...");
    else
    out.println(com_events[1]);
    %>
    </pdk-html:link>
    </td>
    TO passing
    shownews.jsp
    The code for accepting parameter is below
    <%
    System.out.println("value of newsid :"+ newsid);
    String news_id=request.getParameter("news_id");
    if(news_id !=null)
    newsid= Integer.parseInt(news_id);
    System.out.println("value of newsid :"+ newsid);
    %>
    Kindly any one help me how to pass the parameter from one page to another page above problem, because our go live date is very close.
    But same code it is works in IE browser, but not working after deployed in Oracle Portal Environment.
    However, the
    parameters are not passed from the form to the Struts action. When retrieving the parameters, then
    a null value is retrieved, even when the parameter was specified in the form.
    Regards,
    Chandrashekhara
    Message was edited by:
    user487286
    Message was edited by:
    user487286

    Hi Anton,
    I make some tests and it appeared that it's only the output parameter which is not passed through the step (why ?).
    I get this output parameter by a post-running action which parse the joblog and retrieve the sequence number at the line with the pattern  "vendor" (hereunder) :
    100601 20091008 00 516 Job started  0       
    100601 20091008 00 550 Step 001 started (program ZCO_MANAGE_FILE, variant ECLO2, user ID ABAPUSER)  0 001 ZCO_MANAGE_FILE ECLO2 ABAPUSER   
    100601 20091008 00 001 No vendor specified  0 00233      
    100602 20091008 00 517 Job finished  0
    Here is the postrunning action script wich was working before we upgrade :
      JobFile log = jcsJob.getJobFileByName("log");
      if (log != null)
        com.redwood.scheduler.api.search.SearchResultSet myResultSet = log.search("No vendor specified");
        com.redwood.scheduler.api.search.SearchResult myResult = null;
        while (myResultSet.next())
          myResult = myResultSet.getSearchResult();
          String [] line = myResult.getLineText().split(" ");
          JobParameter jp = jcsJob.getJobParameterByName("VendorCode");
          if (jp != null)
            jp.setOutValueString(line[line.length-1]);

  • What parameters should i pass inorder to upload an excel file in gui_upload

    what parameters should i pass inorder to upload an excel file in gui_upload
    Thanks in advance.
    Ahmed.

    check below program....
    *& Report  UPLOAD_EXCEL                                                *
    *& Upload and excel file into an internal table using the following    *
    *& function module: ALSM_EXCEL_TO_INTERNAL_TABLE                       *
    REPORT  UPLOAD_EXCEL no standard page heading.
    *Data Declaration
    data: itab like alsmex_tabline occurs 0 with header line.
    Has the following format:
                Row number   | Colum Number   |   Value
         i.e.     1                 1             Name1
                  2                 1             Joe
    TYPES: Begin of t_record,
        name1 like itab-value,
        name2 like itab-value,
        age   like itab-value,
        End of t_record.
    DATA: it_record type standard table of t_record initial size 0,
          wa_record type t_record.
    DATA: gd_currentrow type i.
    *Selection Screen Declaration
    PARAMETER p_infile like rlgrap-filename.
    *START OF SELECTION
    call function 'ALSM_EXCEL_TO_INTERNAL_TABLE'
           exporting
                filename                = p_infile
                i_begin_col             = '1'
                i_begin_row             = '2'  "Do not require headings
                i_end_col               = '14'
                i_end_row               = '31'
           tables
                intern                  = itab
           exceptions
                inconsistent_parameters = 1
                upload_ole              = 2
                others                  = 3.
      if sy-subrc <> 0.
        message e010(zz) with text-001. "Problem uploading Excel Spreadsheet
      endif.
    Sort table by rows and colums
      sort itab by row col.
    Get first row retrieved
      read table itab index 1.
    Set first row retrieved to current row
      gd_currentrow = itab-row.
      loop at itab.
      Reset values for next row
        if itab-row ne gd_currentrow.
          append wa_record to it_record.
          clear wa_record.
          gd_currentrow = itab-row.
        endif.
        case itab-col.
          when '0001'.                              "First name
            wa_record-name1 = itab-value.
          when '0002'.                              "Surname
            wa_record-name2 = itab-value.
          when '0003'.                              "Age
            wa_record-age   = itab-value.
        endcase.
      endloop.
      append wa_record to it_record.
    *!! Excel data is now contained within the internal table IT_RECORD
    Display report data for illustration purposes
      loop at it_record into wa_record.
        write:/     sy-vline,
               (10) wa_record-name1, sy-vline,
               (10) wa_record-name2, sy-vline,
               (10) wa_record-age, sy-vline.
      endloop.

  • HT1386 Don´t sync all my songs, from a list 3 songs don´t pass to the iphone, but i see it in my computer in Itunes... What can i do??

    Don´t sync all my songs, from a list 3 songs don´t pass to the iphone, but i see it in my computer in Itunes... What can i do??

    What happened to them? They can't just disappear? Have you changed computers or re-loaded the OS since the last time you synced? Do you have a backup of your computer from when they were present in iTunes? Were they ever present in iTunes?

  • IMPORTANT - numerical parameters don't work

    Hello Adobe.
    I've recently downloaded the Flash CS5 and we wanted to upgrade license, but we experience VERY bad problem.
    Steps:
    1. Create blank FLA AS 3.0 movie.
    2. Add to first frame (stage), for example, TextArea component and name it "xxx".
    3. Set in "Properties" window in "Component Parameters" tab:
    text - "hello world"
    maxChars - 10
    4. Add script to first frame with next code:
    trace(xxx.text);
    trace(xxx["text"]);
    trace(xxx.maxChars);
    trace(xxx["maxChars"]);
    xxx.maxChars = 20;
    trace(xxx["maxChars"]);
    trace(xxx.maxChars);
    5. Test movie. You will get next output:
    hello world
    hello world
    0 - WHY THIS IS NOT 10!!!!!!!!!!!!!!!!!!!!!!!
    0 - WHY THIS IS NOT 10!!!!!!!!!!!!!!!!!!!!!!!
    20
    20
    SO NUMERICAL PARAMETERS DON'T WORK! I not a new to Flash. Have worked more than 5 years with this. Also we've tested such behaviour with latest (downloaded today and yesterday) packages from OFFICIAL www.adobe.com website. They are:
    DESIGN PREMIUM CS5
    FLASH CS5 PRO
    we've tested this behavoiur on different machines, with different operating systems. THE SAME - NO WAY!!!!
    PLEASE FIX THIS ISSUE ASAP! and please reply to this thread with DATE of FUTURE FIX! thanks!

    Hi Nivesh!
    - "Are you using a localized version of Flash?  If so, which locale?"
    - en_US
    - "Do you use an Input Method Editor (IME)?  If so, which IME do you use and with what settings?"
    - No, I don't
    - "Also, are you on MAC or WIN?"
    - Windows XP ( SP3 )
    -"Do you have an older version of Flash on the same machines?  If so, when you save this FLA as a previous version and Test Movie using that version, do you still get 0/null or the correct values?"
    - Yes, I have Flas CS4 as well. I did some tests and here is the result:
    Flash CS5. Drag to stage NumericStepper. Set maximum = 100. Test this movie : maximum = 0. Save this fla as a previous version.
    Flash CS4. Open this fla. Test this movie. maximum = 0. Goto the component inspector and look for the maximum values. Attention! maximum = 100,00 ( not 100, not 100.00, not 0 ) Set maximum = 100.5 and test . Result : maximum = 100.5. Save this fla. ( By the way, if I do "Save and compact" then I see  "Filed to open document" pop up )
    Flas CS5. Open our file. Goto the component parameters and see (Attention!) maximum = 100,5 ( not 100.5 ). Test the movie. Result : (Attention!) maximum = 50. Set maximum = 100.55 and press Enter. (Attention!) this value is replaced by 100,55. Test movie and see maximum = 55.
    So I guess it can help you to detect the problem.

  • Satellite A500 - HDMI never work - error don't pass the regza test

    Hi mate,
    I come from italy and, first of all, i want to apologize for my english....^^
    I ll try to explain my problem:
    Every time i try to connect my Pc "Satellite A500" to my TV by HDMI port.... an error appear:
    _the tv is switched off or in stand by or don't pass the regza test......_
    What this means?
    What can i do?
    thanks
    regards

    wow wow wow....
    maybe is my tv the problem?
    i have not a toshiba lcd tv...
    i have an hannspree Xv lcd,hd ready.
    ...and i can't find ,on my tv,the hdmi settings!!!
    theese are my tv specifications:
    Screen Size.-----------------32" (81.28 cm)
    Resolution----------------------1366 x768 (WXGA)
    Aspect Ratio -------------------16:9
    Display Color -----------------16.7 M
    Contrast Ratio ------------------750:1
    Brightness---------------------450 cd/mx
    Viewing Angle ---------------178x (H) / 178x(V)
    Response Time ----------------8 ms
    Video Input-------------------HDMI x1, YPbPr x1, S-Video x1, Composite x 1, SCART x 2, VGA (PC) x1
    Video Output ------------------Composite x 1
    Tuner Input--------------------PAL-SECAM x1
    Audio Output---------------------Headphone x1
    Line in-------------------------S/Composite x 1, PC x1
    VESA Mounting-----------------200 x 100 mm
    Dimension ------------------------810(w) x650(H) x257(D) mm
    Net Weight ----------------------19.4 kg
    Power Consumption --------------- <=194 W
    Standby Power Consumption--------------<=3 W

  • BUS2012 RELEASESTEPCREATED don't pass ReleaseCode

    Can anybody help me???
    I have a Workflow which triggered with the event RELEASESTEPCREATED of BUS2012, but don't pass the field ReleaseCode.
    what can be happening?.

    Hello,
    In SWDD at header level check the bindingbetween event container and workflow container.Event Releasestep is having Releasecode as parmaeter. So at the header level there should be proper binding between event container( releasecode) and Workflow container(releasecode).
    Regards.
    Vikram singh

  • HELP!! WebDynpro don't pass Tables parameters to BAPI.

    hello everyone
    I am in trouble.I use a bapi with Tables parameter in my wedDynpro,and bind some data to this Tables model structure.Unfortunately,these data aren't be passed to bapi,and in my  bapi the Tables paremeter——Table is initial state.
    Could some to help me ?
    My wedDynpro programme follows:
    public void execute_Test( )
        //@@begin execute_Test()
         IWDMessageManager manager = wdComponentAPI.getMessageManager();
         Zzshibin_Test5_Input input = new Zzshibin_Test5_Input();
         wdContext.nodeZzshibin_Test5_Input().bind(input);
         Zzbsctmydsub_Score score = new Zzbsctmydsub_Score();
         score.setZzmydkey("1");
         score.setZzrltkey("2");
         score.setZzsubdes("3");
         score.setZzsubwgtrst("4");
         AbstractList list = new Zzbsctmydsub_Score.Zzbsctmydsub_Score_List();
         list.add(score);
         input.setTable(list);
        try
             wdContext.currentZzshibin_Test5_InputElement().modelObject().execute();
        catch(Exception e)
             manager.reportException("error",true);
             return;
    I am wating for answer.

    Hi Bin,
    Please try the follwoing code.
    public void execute_Test( )
    //@@begin execute_Test()
    IWDMessageManager manager = wdComponentAPI.getMessageManager();
    Zzshibin_Test5_Input input = new Zzshibin_Test5_Input();
    wdContext.nodeZzshibin_Test5_Input().bind(input);
    Zzbsctmydsub_Score score = new Zzbsctmydsub_Score();
    score.setZzmydkey("1");
    score.setZzrltkey("2");
    score.setZzsubdes("3");
    score.setZzsubwgtrst("4");
    <b>input.add<tablename>(score);</b>
    try
    wdContext.currentZzshibin_Test5_InputElement().modelObject().execute();
    catch(Exception e)
    manager.reportException("error",true);
    return;
    With Regards
    Balaram Naidu Bankuru

  • Parameters not gettin passed while lead creation..........

    Hi...
                 I am passing the values of the fields SOURCE and IMPORTANCE in the exporting parameter IT_LEAD_H to the FM CRM_ORDER_MAINTAIN while lead creation...When I check the CRM_LEADH table I find that these values arent gettin reflected ...The guid and the leadtype are gettin saved but the values of these two fields are not present...This is the code I'm using.....
    CT_ORDERADM_H
        ls_orderadm_h-handle        = '1'.
    .   ls_orderadm_h-PROCESS_TYPE  = 'LEAD'.
        ls_orderadm_h-mode          = 'A'.
        INSERT ls_orderadm_h INTO TABLE lt_orderadm_h.
      build table with change fields
        FREE lt_input_field_names.
        ls_input_field_names-fieldname = 'PROCESS_TYPE'.
        INSERT ls_input_field_names INTO TABLE lt_input_field_names.
        ls_input_field_names-fieldname = 'MODE'.
        INSERT ls_input_field_names INTO TABLE lt_input_field_names.
        CLEAR ls_input_fields.
        ls_input_fields-ref_handle  = '1'.
      ls_input_fields-objectname  = 'ORDERADM_H'.
        ls_input_fields-field_names = lt_input_field_names.
        INSERT ls_input_fields INTO TABLE ct_input_fields.
    CRMT_LEAD_H_COMT
      IF IT_LEAD_H IS INITIAL.
        ls_lead_h-ref_handle     = '1'.
        ls_lead_h-SOURCE         = '002'.
        ls_lead_h-IMPORTANCE     = '2'.
      ENDIF.
        INSERT ls_lead_h INTO TABLE lt_lead_h.
      build table with change fields
        FREE lt_input_field_names.
        IF ls_lead_h-SOURCE IS NOT INITIAL.
          ls_input_field_names-fieldname = 'SOURCE'.
          INSERT ls_input_field_names INTO TABLE lt_input_field_names.
        ENDIF.
        IF ls_lead_h-IMPORTANCE IS NOT INITIAL.
          ls_input_field_names-fieldname = 'IMPORTANCE'.
          INSERT ls_input_field_names INTO TABLE lt_input_field_names.
        ENDIF.
        CLEAR ls_input_fields.
        ls_input_fields-ref_handle  = '1'.
        ls_input_fields-ref_kind    = 'A'.
        ls_input_fields-objectname  = 'LT_LEAD_H'.
        ls_input_fields-field_names = lt_input_field_names.
        INSERT ls_input_fields INTO TABLE ct_input_fields.
    IT_STATUS
      IF is_status IS INITIAL.
        ls_status-ref_handle     = '1'.
        ls_status-status         = STATUS.
       ls_status-user_stat_proc = 'CRMLEAD'.
        ls_status-activate       = 'X'.
       ls_status-process        = 'ACCI'.
      ENDIF.
        INSERT ls_status INTO TABLE lt_status.
      build table with change fields
        FREE lt_input_field_names.
        IF ls_status-status IS NOT INITIAL.
          ls_input_field_names-fieldname = 'STATUS'.
          INSERT ls_input_field_names INTO TABLE lt_input_field_names.
        ENDIF.
        IF ls_status-activate IS NOT INITIAL.
          ls_input_field_names-fieldname = 'ACTIVATE'.
          INSERT ls_input_field_names INTO TABLE lt_input_field_names.
        ENDIF.
        CLEAR ls_input_fields.
        ls_input_fields-ref_handle  = '1'.
        ls_input_fields-ref_kind    = 'A'.
        ls_input_fields-objectname  = 'STATUS'.
        ls_input_fields-field_names = lt_input_field_names.
        INSERT ls_input_fields INTO TABLE ct_input_fields.
    ENDIF.
    bring changed fields with values to object layer
      CALL FUNCTION 'CRM_ORDER_MAINTAIN'
        EXPORTING
          it_lead_h         = lt_lead_h
          it_survey         = it_survey
          it_status         = lt_status
        CHANGING
          ct_orderadm_h     = lt_orderadm_h
          ct_orderadm_i     = lt_orderadm_i
          ct_input_fields   = ct_input_fields
        EXCEPTIONS
          error_occurred    = 1
          document_locked   = 2
          no_change_allowed = 3
          no_authority      = 4
          OTHERS            = 5.
    Are there any other parameters that I have to pass?Plz suggest a solution for this......

    Hi Francois,
    Thank you for looking into the issue. Your first response was did you try get_form_field. Yes I did, and it did not work. I realised later (hopefully correctly) that get_form_field will work only if the field below is treated as an input field within <htmlb:form> and </htmlb:form>.
    I shall re-explain the scenario. In default.htm, I enter an IDoc Number(input field) and click submit button. In the <form action > I have mentioned idoc.htm page. In idoc.htm, in On Initialization , I create a tree.
    Method of creating tree
    a) I create a table of type TVIEWNODE and populate the relevant details, except for the link field. The parameters that needs to be passed to the next page is a structure. In order to achieve this(I found this method in one of the posts in the forum),
    Step I -- Serialize the structure data using CL_BSP_UTILITY=>SERIALIZE_DATA and fill a table LT_PARAMETER_LIST.
    Step II -- I then construct a URL using CL_BSP_RUNTIME=>IF_BSP_RUNTIME~CONSTRUCT_BSP_URL passing APPLICATION NAME, 'SEGMENT.HTM' and table LT_PARAMETER_LIST.
    Step III -- This method returns a URL which is then appended in the TVIEWNODE table and the tree is created.
    The tree is created perfectly and the links are perfect as well.
    However as mentioned in my earlier post when I click on the link, the URL shows all the attributes but I am not able to fetch the same using GET_ATTRIBUTE method or GET_FORM_DATA method.
    Next point mentioned was create an attribute. This is an interesting point that you have mentioned. In page attributes, when I try pa_s_idoc-segnam, it mentions special characters not allowed.
    I will explore the possibility of creating fields of internal table as page attributes i.e. using SEGNAM instead of pa_s_idoc-SEGNAM and then pass values to these.
    If there are any other solutions do let me know.
    Thanks again, Francois.

  • Report parameters - don't work in portlet mode?

    Hi,
    Portal 3.0.9 on Solaris.
    I've a report created using the wizard, based on two tables.
    On the Customization Form Display Options
    wizard step I've defined a couple of columns I'd like to see on the parameter form / customization screen. When I run the report in traditional (non-portlet) mode, everything works fine. I can pass parameters to it and the records are selected according to the conditions.
    When I run the report in portlet-mode, and click the Customize link, even though the parameter fields appear, they seem not to have any effect. As a result of the Apply button the previously set conditions disappear from the customization screen, when clicking OK, it isn't taken into consideration at all.
    Thanks,
    Peter

    It was a local issue. After having removed and added the component to the page again, everything started to work fine.
    Thanks for all of you who helped me to resolve my issue.
    Peter

  • SAP fails to find uninstaller or uninstaller parameters are not passed

    We have a custom add-on , and we intend to deploy the add-on with professional quality. However I have a issue with the uninstaller area.
    Scenario 1;
    Installer name = AddOnInstaller.exe
    Uninstaller name = AddOnUnInstaller.exe
    I have created a proper uninstaller and have created the ARD file with the uninstaller listed there. The proper parameters were given, However when registering the add-on ( with SAP) , SAP throws a message saying that uninstaller could not be found. However the uninstaller is present in the given path. I have checked the path in the ard file too. SAP however installs the add-on properly.
    Also During the install SAP copies the Installer.exe to the local profile temp folder, and runs from there. Does this have something to do with SAP not finding the uninstaller?
    Scenario2:
    This time I tried creating the Install and Uninstall function within the same program. So I have one exe now called AddOnInstaller.exe
    I have set the installer in the ard file to the AddOnInstaller.exe  and given the proper parameters. And I have set the Uninstaller in the ard file to another parameter such as “/u|uninstall;”.
    When registering the add-on within SAP, SAP now dose NOT give an error ( could not find uninstaller ). And also the add-on installs properly.
    Within my AddOnInstaller.exe, I check the command line to see if the command line is for an Install, or an Uninstall.
    However when the add-on is removed and deregistered, when I log back in to SAP, and when SAP runs the uninstaller, it passes Install parameters to the AddOnInstaller.exe. I have checked this with message boxes. Should it not pass Uninstall parameters as given in the ard file?
    I need a fix for this or a workaround please. all help is appreciated.
    regards,
    Indika.
    Message was edited by: changed the header title
            Indika Dekumpitiya

    yes the fixing the parameter helped, now SAP passes the correct parameter. I pass /u ( no | hwoever ).
        vCommand = Split(Trim(Command), "|")
        mInstallPath = Trim(vCommand(0))
        If UBound(vCommand) > 0 Then '---means Install paramaters
            mInstallerPath = Trim(vCommand(1))
        Else
            bUninstall = True
        End If
        If bUninstall Then
            Call UninstallAddOn
        Else
            Call Install
        End If
    this code above worked, thanks.

  • Page item parameters with comma passed incorrectly

    using APEX 3.0, I set up a page with a report with a link column. On the link section of the column, I have set up two items to be set on the following page. However, one of those two values has commas in it, and is not passed correctly. It actually doesn't work even if there's only one parameter. Any suggestions? If the suggestion involves changing the page template, could you make the directions explicit, as I've never done that.
    Thanks, -warren

    Warren,
    Pass the value between backslashes, e.g.if #COLA# will contain comma(s), f?p=.....P1_ITEMA,P1_ITEMB:\#COLA#\,#COLB#
    Scott

  • # of parameters you can pass using AJAX

    I have a weird problem with an AJAX form combined with a CFC.  Just to rule out any possibilities, is there a limit on the number of input fields you can pass to a CFC using AJAX?  I only ask because it appears when the entire form is filled out the page throws an error that the CFC can't be found.
    Also, I'm noticing that 2 of the parameters are out of order (in red). Would that make a difference?  I'm also not sure why they are out of order when getting passed because they are not that way on the form.  Am I missing something here?
    CFC
    <cffunction name="LyricOpera" access="remote" returntype="array" output="false">
        <cfargument name="CurrentApplicationStep" type="string" default="" />
        <cfargument name="ScreenSelection" type="string" default="" />
        <cfargument name="Role1" type="string" default="" />
        <cfargument name="Opera1" type="string" default="" />
        <cfargument name="Company1" type="string" default="" />
        <cfargument name="Year1" type="string" default="" />
        <cfargument name="Role2" type="string" default="" />
        <cfargument name="Opera2" type="string" default="" />
        <cfargument name="Company2" type="string" default="" />
        <cfargument name="Year2" type="string" default="" />
        <cfargument name="Role3" type="string" default="" />
        <cfargument name="Opera3" type="string" default="" />
        <cfargument name="Company3" type="string" default="" />
        <cfargument name="Year3" type="string" default="" />
        <cfargument name="Aria1" type="string" default="" />
        <cfargument name="Aria1Opera" type="string" default="" />
        <cfargument name="Aria1Language" type="string" default="" />
        <cfargument name="Aria2" type="string" default="" />
        <cfargument name="Aria2Opera" type="string" default="" />
        <cfargument name="Aria2Language" type="string" default="" />
        <cfargument name="Aria3" type="string" default="" />
        <cfargument name="Aria3Opera" type="string" default="" />
        <cfargument name="Aria3Language" type="string" default="" />
        <cfargument name="Variable1Name" type="string" default="" />
        <cfargument name="Variable1Institution" type="string" default="" />
        <cfargument name="Variable1Address1" type="string" default="" />
        <cfargument name="Variable1City" type="string" default="" />
        <cfargument name="Variable1State" type="string" default="" />
        <cfargument name="Variable1Province" type="string" default="" />
        <cfargument name="Variable1Zipcode" type="string" default="" />
        <cfargument name="Variable1PostalCode" type="string" default="" />
        <cfargument name="Variable1Phone" type="string" default="" />
        <cfargument name="Variable1IntlPhone" type="string" default="" />
        <cfargument name="Variable1Country" type="string" default="" />
        <cfargument name="Variable1Email" type="string" default="" />
        <cfargument name="Variable2Name" type="string" default="" />
        <cfargument name="Variable2Institution" type="string" default="" />
        <cfargument name="Variable2Address1" type="string" default="" />
        <cfargument name="Variable2City" type="string" default="" />
        <cfargument name="Variable2State" type="string" default="" />
        <cfargument name="Variable2Province" type="string" default="" />
        <cfargument name="Variable2Zipcode" type="string" default="" />
        <cfargument name="Variable2PostalCode" type="string" default="" />
        <cfargument name="Variable2Phone" type="string" default="" />
        <cfargument name="Variable2IntlPhone" type="string" default="" />
        <cfargument name="Variable2Country" type="string" default="" />
        <cfargument name="Variable2Email" type="string" default="" />
    From Firebug
    argumentCollection{
    "CurrentApplicationStep":"Lyric-Opera",
    "ScreenSelection":"Submit",
    "Role1":"Abigail",
    "Opera1":"The Crucible",
    "Company1":"Kingwood Summer Opera",
    "Year1":"2010",
    "Role2":"Title role",
    "Opera2":"Suor Angelica",
    "Company2":"Kingwood Summer Opera",
    "Year2":"2008",
    "Role3":"Lauretta",
    "Opera3":"Gianni Schicchi",
    "Company3":"Sam Houston State University",
    "Year3":"2007",
    "Aria1":"Tacea la notte placida",
    "Aria1Opera":"Il Trovatore",
    "Aria1Language":"Italian",
    "Aria2":"Song to the Moon",
    "Aria2Opera":"Rusalka",
    "Aria2Language":"Czech",
    "Aria3":"Embroidery Aria",
    "Aria3Opera":"Peter Grimes",
    "Aria3Language":"English",
    "Variable1Name":"Todd R Miller",
    "Variable1Institution":"Lonestar College Kingwood",
    "Variable1Address1":"20000 Kingwood Dr",
    "Variable1City":"Kingwood",
    "Variable1State":"TX",
    "Variable1Province":"",
    "Variable1Zipcode":"77339",
    "Variable1Phone":"281-312-1485",
    "Variable1IntlPhone":"",
    "Variable1Country":"USA",
    "Variable1Email":"[email protected]",
    "Variable2Name":"Anne Heath-Welch",
    "Variable2Institution":"Todd Miller",
    "Variable2Address1":"309 East 13th Street",
    "Variable2City":"Houston",
    "Variable2State":"TX",
    "Variable2Province":"",
    "Variable2Zipcode":"77008",
    "Variable2Phone":"832-335-9108",
    "Variable2IntlPhone":"",
    "Variable2Country":"USA",
    "Variable2Email":"[email protected]",
    "Variable1Postalcode":"",
    "Variable2Postalcode":"",
    "Submit":"Continue"}
    methodLyricOpera
    returnFormat
    json

    The fix is to set "setHTTPMethod("POST");" for the AJAX proxy.  By default, the proxy function "setHTTPMethod("method");"  is set to "GET" and 47 input fields with corresponding data is over the limit.  The proxy function, "setHTTPMethod("method");", must be set to "POST" to avoid this error.

  • What parameters should  I pass to function module CHARACTERISTIC_VALUE_GET

    Hi all,
    please give the details about the function module "CHARACTERISTIC_VALUE_GET",
    In import parameters
    I_APPLC
    I_TABNM
    I_REPID
    is coming and I don't know what value I put in it to run it.
    thanks in advance.
    manoj.

    Hi PG ,
    Both excel and word formats are Microsoft propertiery formats , so you cannot use a "x-string to string" FM to covert them to string because , the data in them is not exactly in xstring formats.
    There are many threads on this topic..you should be able to find them.\
    Here is one such thread [link|Re: Can plain text be extractted from word doc in OfficeControl?].
    Thanks,
    Aditya.
    Edited by: Aditya Karanth on Nov 12, 2010 12:56 PM

  • Destype and desname parameters don't work properly

    Hi,
    We have a j2ee webApp that uses oracle reports to run reports. One report in particular could be really long and slow (b/c it contains lots of dynamically generated jpegs) depending on what parameters a user chooses. So for this report, we'd like it to run asynchronously, notify the user when it is finished, and store the pdf on that user's local machine. So our report url looks like this:
    http://appServerHostName:portNumber/WebApp/rwservlet?report=someReport.jsp&server=ourServer&destype=LOCALFILE&desname=$TMP/test.pdf&cmdkey=someKey&desformat=pdf&ENGINERESPONSETIMEOUT=50&NOTIFYSUCCESS=[email protected]&NOTIFYFAILURE=[email protected]&background=yes&ourSpecificParameters...
    I got the first 2 things working by doing background=yes&notifysuccess=someEmailAddress
    However, I can't get the report to be downloaded to the user's machine after it's done running. I've tried:
    1) destype=localfile&desname=$TMP/test.pdf
    2) destype=localfile&desname=C:\temp\test.pdf and other ways.
    I also tried to see if I could store the pdf on our UNIX appServer:
    destype=file&desname=$TMP/test.pdf but that didn't work either.
    No matter what I set destype to (localfile, cache, or file), the pdf ALWAYS gets stored on our appServer at $ORACLE_HOME/reports/cache and the name of the pdf gets derived from the value of desname plus some 8-digit random numeric string. So in the 1st case above, the generated pdf was:
    test25136488.pdf
    And in the second case, the C:\temp\ wasn't interpreted as a directory, but as part of the filename so the result was an ugly filename:
    C:\temp\test14257852.pdf
    This is only a problem for us for this 1 report (and possibly others in the future) b/c our other reports typically run pretty fast so the user can just wait for the pdf output to pop up in their web browser.
    Any help on how to get destype and desname working properly (or if you have a better solution for dealing with really time and memory consuming reports) would be much appreciated.
    Thanks.

    Hello,
    The behaviour of DESTYPE=LOCALFILE is not the same for rwclient and the reports servlet :
    http://www.oracle.com/webapps/online-help/reports/10.1.2/topics/htmlhelp_rwbuild_hs/rwrefex/cmdline/common/bld_destype.htm
    It is not possible to save an ouput returned by an URL automatically with a browser.
    If you want something automatic, you have to use a free utility like curl or lynx
    http://curl.haxx.se/
    http://lynx.isc.org/lynx2.8.5/index.html
    or write a small application in java. There are many examples on the web :
    http://www.devdaily.com/java/edu/pj/pj010011/index.shtml
    Learn how to download the contents of a URL
    using Java's URL class
    http://www.javaworld.com/javaworld/javatips/jw-javatip34.html
    Java Tip 34: POSTing via Java
    Learn how to POST data to Web servers in Java
    http://www.exampledepot.com/egs/java.net/Post.html?l=rel
    e135. Sending a POST Request Using a URL
    http://java.sun.com/docs/books/tutorial/networking/urls/readingURL.html
    Reading Directly from a URL
    Regards

Maybe you are looking for