Parameters to be mapped for connection spec in JCA connection
Hi,
Anyone please let me know the parameters(exact Keys) to be mapped in connection spec of JCA. I am using JNDI to get connection to backend system. Here is the code which i am using.
ctx = new InitialContext();
connectionFactory = (IConnectionFactory) ctx.lookup("deployedAdapters/SAPFactory/shareable/SAPFactory");
IConnectionSpec spec;
spec = connectionFactory.getConnectionSpec();
((Map) spec).put("KEY", "Value");
clnt = connectionFactory.getConnectionEx(spec);
I would like to know exact Key's to be used to get connection to backend R/3 system.
Thanks,
Suresh.
Hi,
I have used the following parameters, still am not able to connect. Am getting, connection Failed: Unable to get connection. Please see the below parameters.
((Map) spec).put("client", "100");
// ((Map) spec).put("UserName", "");
// ((Map) spec).put("Password", "");
// ((Map) spec).put("logonmethod", "");
// ((Map) spec).put("Language", "EN");
// ((Map) spec).put("ashost", "");
// ((Map) spec).put("sysnr", "02");
Is parameter names(client,UserName,Password) correct? Do we need to change like "user", "Passwd" ? Please let me know exact spell of parameters names. Thanks.
Regards,
Srikanth.
Similar Messages
-
I am getting the following error when trying to connect to both my exchange servers.
New-PSSession : [ex2013-002.nafa.ca] Connecting to remote server ex2013-002.nafa.ca failed with the following error
message : No mapping for the Unicode character exists in the target multi-byte code page. For more information, see
the about_Remote_Troubleshooting Help topic.
At line:1 char:12
+ $Session = New-PSSession -ConfigurationName Microsoft.Exchange -ConnectionUri ht ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
gTransportException
+ FullyQualifiedErrorId : 1113,PSSessionOpenFailed
EMS used to connect ok. I am not sure if there is any connection but Outlook was installed recently on the exchange server to enable mailbox level backups.
Any help would be appreciated.
Steve HurstHello Steve,
Firstly, you cannot install Outlook with Exchange because they share certain dll files.
About the EMS question, I suggest we try rebuilding the powershell virtual directory. If it still does not work, check the application log for more referernce.
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support -
Issue with xsd Data type mapping for collection of user defined data type
Hi,
I am facing a issue with wsdl for xsd mapping for collection of user defined data type.
Here is the code snippet.
sample.java
@WebMethod
public QueryPageOutput AccountQue(QueryPageInput qpInput)
public class QueryPageInput implements Serializable, Cloneable
protected Account_IO fMessage = null;
public class QueryPageOutput implements Serializable, Cloneable
protected Account_IO fMessage = null;
public class Account_IO implements Serializable, Cloneable {
protected ArrayList <AccountIC> fintObjInst = null;
public ArrayList<AccountIC>getfintObjInst()
return (ArrayList<AccountIC>)fintObjInst.clone();
public void setfintObjInst(AccountIC val)
fintObjInst = new ArrayList<AccountIC>();
fintObjInst.add(val);
Public class AccountIC
protected String Name;
protected String Desc;
public String getName()
return Name;
public void setName(String name)
Name = name;
For the sample.java code, the wsdl generated is as below:
<?xml version="1.0" encoding="UTF-8" ?>
<wsdl:definitions
name="SimpleService"
targetNamespace="http://example.org"
xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
xmlns:tns="http://example.org"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/"
>
<wsdl:types>
<xs:schema version="1.0" targetNamespace="http://examples.org" xmlns:ns1="http://example.org/types"
xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:import namespace="http://example.org/types"/>
<xs:element name="AccountWSService" type="ns1:accountEMRIO"/>
</xs:schema>
<xs:schema version="1.0" targetNamespace="http://example.org/types" xmlns:ns1="http://examples.org"
xmlns:tns="http://example.org/types" xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:import namespace="http://examples.org"/>
<xs:complexType name="queryPageOutput">
<xs:sequence>
<xs:element name="fSiebelMessage" type="tns:accountEMRIO" minOccurs="0"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="accountEMRIO">
<xs:sequence>
<xs:element name="fIntObjectFormat" type="xs:string" minOccurs="0"/>
<xs:element name="fMessageType" type="xs:string" minOccurs="0"/>
<xs:element name="fMessageId" type="xs:string" minOccurs="0"/>
<xs:element name="fIntObjectName" type="xs:string" minOccurs="0"/>
<xs:element name="fOutputIntObjectName" type="xs:string" minOccurs="0"/>
<xs:element name="fintObjInst" type="xs:anyType" minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="queryPageInput">
<xs:sequence>
<xs:element name="fPageSize" type="xs:string" minOccurs="0"/>
<xs:element name="fSiebelMessage" type="tns:accountEMRIO" minOccurs="0"/>
<xs:element name="fStartRowNum" type="xs:string" minOccurs="0"/>
<xs:element name="fViewMode" type="xs:string" minOccurs="0"/>
</xs:sequence>
</xs:complexType>
</xs:schema>
<schema xmlns="http://www.w3.org/2001/XMLSchema" targetNamespace="http://example.org"
xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:tns="http://example.org" xmlns:ns1="http://example.org/types">
<import namespace="http://example.org/types"/>
<xsd:complexType name="AccountQue">
<xsd:sequence>
<xsd:element name="arg0" type="ns1:queryPageInput"/>
</xsd:sequence>
</xsd:complexType>
<xsd:element name="AccountQue" type="tns:AccountQue"/>
<xsd:complexType name="AccountQueResponse">
<xsd:sequence>
<xsd:element name="return" type="ns1:queryPageOutput"/>
</xsd:sequence>
</xsd:complexType>
<xsd:element name="AccountQueResponse" type="tns:AccountQueResponse"/>
</schema>
</wsdl:types>
<wsdl:message name="AccountQueInput">
<wsdl:part name="parameters" element="tns:AccountQue"/>
</wsdl:message>
<wsdl:message name="AccountQueOutput">
<wsdl:part name="parameters" element="tns:AccountQueResponse"/>
</wsdl:message>
<wsdl:portType name="SimpleService">
<wsdl:operation name="AccountQue">
<wsdl:input message="tns:AccountQueInput" xmlns:ns1="http://www.w3.org/2006/05/addressing/wsdl"
ns1:Action=""/>
<wsdl:output message="tns:AccountQueOutput" xmlns:ns1="http://www.w3.org/2006/05/addressing/wsdl"
ns1:Action=""/>
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="SimpleServiceSoapHttp" type="tns:SimpleService">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="AccountQue">
<soap:operation soapAction=""/>
<wsdl:input>
<soap:body use="literal"/>
</wsdl:input>
<wsdl:output>
<soap:body use="literal"/>
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="SimpleService">
<wsdl:port name="SimpleServicePort" binding="tns:SimpleServiceSoapHttp">
<soap:address location="http://localhost:7101/WS-Project1-context-root/SimpleServicePort"/>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
In the above wsdl the collection of fintObjInst if of type xs:anytype. From the wsdl, I do not see the xsd mapping for AccountIC which includes Name and Desc. Due to which, when invoking the web service from a different client like c#(by creating proxy business service), I am unable to set the parameters for AccountIC. I am using JAX-WS stack and WLS 10.3. I have already looked at blog http://weblogs.java.net/blog/kohlert/archive/2006/10/jaxws_and_type.html but unable to solve this issue. However, at run time using a tool like SoapUI, when this wsdl is imported, I am able to see all the params related to AccountIC class.
Can some one help me with this.
Thanks,
Sudha.Did you try adding the the XmlSeeAlso annotation to the webservice
@XmlSeeAlso({<package.name>.AccountIC.class})
This will add the schema for the data type (AccountIC) to the WSDL.
Hope this helps.
-Ajay -
SSO is not working - User is missing credentials for connecting to alias
Dear Experts,
I am facing a strange problem in SSO with reference system user mapping. I have configured reference system user mapping for accessing R/3 for ESS/MSS and transactional iviews along with UWL. The SSO was configured 2 months ago and was working fine till yesterday.
Since this Monday, (2 days), the system connection tests are failing on connector. But, ESS/MSS & Transaction iviews with SAP Logon tickets are working fine. But, while trying to access UWL tasks, SSO is failing. Following is the error message -
"Exception occured Exception type:com.sap.netweaver.bc.uwl.connect.ConnectorException Message:Tue Aug 11 09:46:58 CEST 2009
(Connector) :com.sap.portal.connectivity.destinations.PortalDestinationsServiceException:User is missing credentials for connecting to alias <Aliassystem>. Contact your system administrator. "
I have created a destination for the respective backend in Visual Admin > node > services > Destinations as some tasks are not visible in UWL as per Note- 1133821, 2 weeks ago.It was working fine till yestreday. While testing from destinations, for Connected User(SAP Logon ticket Assertion ticket) , getting the error message -
Error During ping operation:Ticket contain no/an emplty ABAP user id(refer note 1159962). The destination is successfully connected with configured user.
But from the Tracecollector logs, I can see that the mapped user is set in the SAP Logon ticket and the User <ABCD> is existing in the target ECC system. More over, the SSO with refence system user mapping is working fine for ESS/MSS and Transaction based iviews. It is failing only for UWL tasks and also in system connection tests for connector. ITS was failing since the beginning.WAS is successful even now.
Trace file info -
Mapped user [ABCD] set in SAP Logon Ticket. The authenticated user is [<portaluserid>]. Authentication stack: [ticket]..
The created ticket is:
[Ticket [initialized]
Ticket Version = 0
Ticket Codepage = (Encoding=1100)
User = <ABCD>
Issuing System ID = EPD
Issuing System Client = 000
Creation Time = 200908110746
Valid Time = 8 h 0 min
Signature (length=261 bytes)
I checked tcode SSO2 in ECC system and it is ready for accepting the logon tickets. The strange thing is single sign on is working for ESS/Transactional iviews and not for UWL. Second thing is UWL was working fine till yesterday morning and stopped working now with SSO problems.
Can you pls advise where to look for fixing the SSO - missing user details for UWL destination?
regards,
Isvarya<title>reporting the text as formatted text - Dear Experts,</title>
<!--[if gte mso 9]><xml>
<o:DocumentProperties>
<o:Author>Isvarya Bolisetti</o:Author>
<o:LastAuthor>Isvarya Bolisetti</o:LastAuthor>
<o:Revision>2</o:Revision>
<o:TotalTime>1</o:TotalTime>
<o:Created>2009-08-11T11:21:00Z</o:Created>
<o:LastSaved>2009-08-11T11:21:00Z</o:LastSaved>
<o:Pages>1</o:Pages>
<o:Words>385</o:Words>
<o:Characters>2195</o:Characters>
<o:Company>Bekaert N.V</o:Company>
<o:Lines>18</o:Lines>
<o:Paragraphs>5</o:Paragraphs>
<o:CharactersWithSpaces>2575</o:CharactersWithSpaces>
<o:Version>11.9999</o:Version>
</o:DocumentProperties>
</xml><![endif]><![if gte mso 9]><![endif]><![if gte mso 9]>
<!--
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{mso-style-parent:"";
margin:0cm;
margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:12.0pt;
font-family:"Times New Roman";
mso-fareast-font-family:"Times New Roman";}
@page Section1
div.Section1
-->
</style>
<!--[if gte mso 10]>
<style>
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman";
mso-ansi-language:#0400;
mso-fareast-language:#0400;
mso-bidi-language:#0400;}
</style>
<![endif]><![if gte mso 9]><![endif]><![if gte mso 9]>Mapped user set in SAP Logon Ticket. The
authenticated user is . Authentication stack: ..
The created ticket is:
[Ticket -
How to integrate bing map for including or displaying multiple locations at the same time
how to integrate bing map for including or displaying multiple locations at the same time
Have you aware of the geolocation field that's been introduced with SharePoint 2013? You can store location data within a list and then integrate this within Bing. The second tutorial on this Bing team blog will show it well.
https://www.bing.com/blogs/site_blogs/b/maps/archive/2013/03/26/connecting-a-sharepoint-list-to-bing-maps.aspx
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem. -
Presently we are using forms 4.5. We have got costomise key
mapping for operating through forms. Now we want to start forms
on web (Intranet). Earlier we use to change key mapping through
oracle*terminal. I require help in knowing how to customise key
mapping in forms 6i / oracle 8.1.7.Hi,
Boy, I have some good news to you: Oracle*Terminal is no longer
needed.
WordPad (or your favorite text editor) is your tool from now on.
Keyboard files are located in $ORACLE_HOME\FORMS60.
Simply ignore the binary file fmrusw.res when you run Forms on
the Web. FMRWEB.RES is the one that is used, and it's pure ASCII.
There are some comments in the file itself.
The keys are the same as the Motif version of Forms.
If you prefer the Windows keys, simply use FMRPCWEB.RES instead.
How? Check under $ORACLE_HOME\FORMS60\SERVER for your
formsweb.cfg, go to User Parameters and replace the
otherparams=
line with
otherparams=term=%forms60%\fmrpcweb.res
Now, anyone can define the Function-0 till Function-9 key
combinations, in order to use KEY-F0 till KEY-F9 triggers.
Hope this helps,
Pedro das Neves
[email protected] -
P6 user name is not valid for connecting to the reporting database
No data is available because your P6 user name is not valid for connecting to the reporting database
I am getting above error in the following environment:
P6 running on wls instance 1.
BI Publisger running on wls instance 2
MS SQL server 2005
Note that the error appears when I clink on the 'Reports' tab in P6. My admin user on P6 has access to report/analyser modules.
To connect P6 to BI Publisher I am using 'PxRptUser' in the P6 configuration for Bi Publisher. I know as well that the WSDL URL is correct and I can test this in SoapUI tool.
In BI publisher I have created the PMDB data source using PxRprUser, and the test of this connection works.
(Because the report samples come with Oracle flavoured SQL that SQL server does not like, I have configured BI Publisher so I have just a single report left that sources it data from an xml file. This works in BI Publisher. It also helps me in that I do not need to add 'WHERE' clauses and parameters required for SQL server?)
Furthermore, using a DB tool, I can connect to my SQL server using PxRPTUser.
So why do I get the error above?
I picked up somewhere that I should not be adding users to BI Publisher. Funny enough, testing the 'login' method the BI Publisher exposes through its WSDL (as above) I noticed I HAD to create the user PxRptUser in BI publisher application itself (on top of PxRptUser in database) for the login web service to work with PxRptUser
That did not solve the connection between P6 and BI Publisher though. What am I missing ...
Edited by: user3674522 on 10/11/2011 20:16Thought I found something but can't repliacte, som issue is still there:
Had a look at the wls instance logs where BI publisher is running, and the error I get is:
111111_023646955][][ERROR] javax.naming.NamingException: Unresolved naming: cn=admin, dc=user, dc=users, dc=principals at [cn=admin]
That user, admin, is the one I have used to access P6. Why is this passed on to BI Publisher? I thought the idea was that the PxRptUser set in BI Publisher configurations in P6 would be used?
Edited by: user3674522 on 10/11/2011 20:17 -
How to defne user mapping for a Webservice method to acheive single sign on
I all,
I have created a Web service System using a url (containing full path of my wsdl )
Now this particular wsdl(my webservice) has an <b>authenticate method</b> , which takes username and password.
wanted to know is there any way that i can do user mapping for it .
i.e when i create an ivew for this web service system using authenticate method , it should pick up the username and password from the user mapping. presently the ivew itself asks for username and password ?
else can anyone tellme is there a way to do user mapping for my web service system that i have created using a wsdl url. presently it works with any junk username password, i mean the connection always succeds , may be because accessing a wsdl dosent requires any user name and password.
thanksI all,
I have created a Web service System using a url (containing full path of my wsdl )
Now this particular wsdl(my webservice) has an <b>authenticate method</b> , which takes username and password.
wanted to know is there any way that i can do user mapping for it .
i.e when i create an ivew for this web service system using authenticate method , it should pick up the username and password from the user mapping. presently the ivew itself asks for username and password ?
else can anyone tellme is there a way to do user mapping for my web service system that i have created using a wsdl url. presently it works with any junk username password, i mean the connection always succeds , may be because accessing a wsdl dosent requires any user name and password.
thanks -
Java Mapping for JDBC Interface
Hi,
please help on java mapping for my jdbc interface.
my java code for jdbc is:
Created on May 7, 2008
TODO To change the template for this generated file go to
Window - Preferences - Java - Code Style - Code Templates
package XiMappingDB2.com.xi.test;
@author miracle
TODO To change the template for this generated type comment go to
Window - Preferences - Java - Code Style - Code Templates
Created on May 2, 2008
To change the template for this generated file go to
Window>Preferences>Java>Code Generation>Code and Comments
package com.xi.test;
import java.io.IOException;
import java.io.InputStream;
import java.io.OutputStream;
import java.sql.Connection;
import java.sql.DriverManager;
import java.sql.Statement;
import java.util.HashMap;
import java.util.Map;
import javax.xml.parsers.DocumentBuilder;
import javax.xml.parsers.DocumentBuilderFactory;
import org.w3c.dom.Document;
import org.w3c.dom.Element;
import org.w3c.dom.Node;
import org.w3c.dom.NodeList;
import com.sap.aii.mapping.api.AbstractTrace;
import com.sap.aii.mapping.api.MappingTrace;
import com.sap.aii.mapping.api.StreamTransformation;
import com.sap.aii.mapping.api.StreamTransformationConstants;
import com.sap.aii.mapping.api.StreamTransformationException;
@author kotla
To change the template for this generated type comment go to
Window>Preferences>Java>Code Generation>Code and Comments
public class NameMerge implements StreamTransformation {
private Map param = null;
private MappingTrace trace = null;
public void setParameter(Map param){
this.param = param;
if (param == null) {
this.param = new HashMap();
public void execute(InputStream input, OutputStream output)
throws StreamTransformationException {
AbstractTrace trace = null;
String RESULT = new String();
trace =
(AbstractTrace) param.get(
StreamTransformationConstants.MAPPING_TRACE);
try {
//Create DOM parser
DocumentBuilderFactory factory =
DocumentBuilderFactory.newInstance();
DocumentBuilder builder = factory.newDocumentBuilder();
//Parse input to create document tree
Document doc = builder.parse(input);
trace.addInfo(doc.toString());
// Map the elements
Node root = doc.getFirstChild(); // gets the root element
NodeList children = root.getChildNodes();
for (int item = 0; item < children.getLength(); item++) {
if (children.item(item) instanceof Element) {
root = (Element) children.item(item);
NodeList ch = root.getChildNodes();
RESULT = RESULT.concat(ch.item(0).getNodeValue() + " ");
trace.addInfo(RESULT); }
catch (Exception e) {
trace.addDebugMessage(e.getMessage());
//Return the output document
String document_exit = "<?xml version=\"1.0\" encoding=\"UTF-8\"?><ns0:Person2 xmlns:ns0=\"urn:xxxxx.com:test:mapping:lookups\"><RESULT>"
+ RESULT
+ "</RESULT></ns0:Person2>";
insertDB(RESULT);
try
output.write(document_exit.getBytes());
catch (IOException e1) {
trace.addDebugMessage(e1.getMessage());
public void insertDB(String DETAILS){
Statement stmt = null;
Connection conn = null;
try {
conn = getConnection();
conn.setAutoCommit(false);
stmt = conn.createStatement();
stmt.execute("insert into KUMAR(DETAILS) values ('"DETAILS"')");
//System.out.println ('"DETAILS"');
conn.commit();
stmt.close();
conn.close();
} catch (Exception e) {
System.err.println("Error: " + e.getMessage());
e.printStackTrace();
public Connection getConnection() throws Exception {
String driver = "com.ibm.db2.jcc.DB2Driver";
String url = "jdbc:db2://172.17.4.24:50000/SAMPLE";
String username = "miracle";
String password = "sairam";
Class.forName(driver);
Connection conn = DriverManager.getConnection(url, username, password);
return conn;
but we are getting the following error:Linkage error occurred when loading class JavaDatabaseApp/XiMappingDB2/com/xi/test/NameMerge (http://FILE2JDBC_US, 7d7b3141-f4d1-11dc-b25e-d5d5c0a80198, -1)
Start of test
LinkageError at JavaMapping.load(): Could not load class: JavaDatabaseApp/XiMappingDB2/com/xi/test/NameMerge
java.lang.NoClassDefFoundError: JavaDatabaseApp/XiMappingDB2/com/xi/test/NameMerge (wrong name: XiMappingDB2/com/xi/test/NameMerge) at java.lang.ClassLoader.defineClass0(Native Method) at java.lang.ClassLoader.defineClass(ClassLoader.java:539) at java.lang.ClassLoader.defineClass(ClassLoader.java:448) at com.sap.aii.ibrep.server.mapping.ibrun.RepMappingLoader.findClass(RepMappingLoader.java:175) at java.lang.ClassLoader.loadClass(ClassLoader.java:289) at java.lang.ClassLoader.loadClass(ClassLoader.java:235) at com.sap.aii.ibrep.server.mapping.ibrun.RepJavaMapping.load(RepJavaMapping.java:136) at com.sap.aii.ibrep.server.mapping.ibrun.RepJavaMapping.execute(RepJavaMapping.java:50) at com.sap.aii.ibrep.server.mapping.ibrun.RepMappingHandler.run(RepMappingHandler.java:80) at com.sap.aii.ibrep.server.mapping.rt.MappingHandlerAdapter.run(MappingHandlerAdapter.java:107) at com.sap.aii.ibrep.server.mapping.ServerMapService.transformInterfaceMapping(ServerMapService.java:127) at com.sap.aii.ibrep.server.mapping.ServerMapService.transform(ServerMapService.java:104) at com.sap.aii.ibrep.sbeans.mapping.MapServiceBean.transform(MapServiceBean.java:40) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0.transform(MapServiceRemoteObjectImpl0.java:167) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0p4_Skel.dispatch(MapServiceRemoteObjectImpl0p4_Skel.java:104) at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320) at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198) at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170).
please solve this issue.Uday,
May be you have uploaded class file into external definitions.
You need to Zip the class file into .jar and then upload into external definitions of integration repository
Regards,
Kiran Bobbala -
Error in codepage mapping for source system
Hi Experts,
I am getting the following error while loading data from ECC only for Account COPA datasource.
Error in codepage mapping for source system. Error text:
Message no. RSDS_ACCESS013
Regards,
Sandeep SharmaHi Sandeep,
This is a issue related to idocsRFC connections from teh sourcesystem....
U can contact ur BASIS team to solve this...
From their end they have to chk the unprocessed/errored idocs in BD87...
They have to run a report:RBDAGAIN to process the errored idoc's in the source which are in STATUS:'02'.
This is a solution for temporarilrly basis...
If this occurs regularly they have to change the settings in SM59 which is so important...
Refer exact note for this: 784381
The SAP note 613389 may also be relevant for the error message "Could not find code page for receiving system", please check the information given in the note and see if you can use it to resolve the problem.
Regards,
Marasa. -
Adapter Status Error : Error in creating message ID map for JMS message:
Currently in the SAP XI 3.0 JMS Adapter, I am receiving the following error
Error in creating message ID map for JMS message:
ie. Error while processing message 'de8265f6-c864-4479-1137-9bab17b78b3b'; detailed error description: com.sap.aii.adapter.jms.api.channel.filter.MessageFilterException: Error in creating message ID map for JMS message: ID:c3e2d840d8d4d7f14040404040404040c44f8e2213630b01 at com.sap.aii.adapter.jms.core.channel.filter.InboundDuplicateCheckFilter.filter(InboundDuplicateCheckFilter.java:103)
Although I am receivng this error, when I check the details of the message processing, all steps are successful and the message is set to status : DLVD
Audit Log for Message: de8265f6-c864-4479-1137-9bab17b78b3b
Time Stamp Status Description
09.06.2009 13:27:24 Success New JMS message with JMS message ID ID:c3e2d840d8d4d7f14040404040404040c44f8e2213630b01 received. The XI message ID for this message is de8265f6-c864-4479-1137-9bab17b78b3b
09.06.2009 13:27:24 Success JMS message converted to XI message format successfully
09.06.2009 13:27:24 Success RRB: entering RequestResponseBean
09.06.2009 13:27:24 Success RRB: suspending the transaction
09.06.2009 13:27:24 Success RRB: passing through ...
09.06.2009 13:27:24 Success RRB: leaving RequestResponseBean
09.06.2009 13:27:24 Success Transform: using Transform.Class: com.sap.aii.messaging.adapter.Conversion
09.06.2009 13:27:24 Success Transform: transforming the payload ...
09.06.2009 13:27:24 Success Transform: successfully transformed
09.06.2009 13:27:24 Success Application attempting to send an XI message synchronously using connection JMS_http://sap.com/xi/XI/System.
09.06.2009 13:27:24 Success Trying to put the message into the call queue.
09.06.2009 13:27:24 Success Message successfully put into the queue.
09.06.2009 13:27:24 Success The message was successfully retrieved from the call queue.
09.06.2009 13:27:24 Success The message status set to DLNG.
09.06.2009 13:27:25 Success The application sent the message synchronously using connection JMS_http://sap.com/xi/XI/System. Returning to application.
09.06.2009 13:27:25 Success The message was successfully transmitted to endpoint http://sapxia.swets.nl:8000/sap/xi/engine?type=entry using connection JMS_http://sap.com/xi/XI/System.
09.06.2009 13:27:25 Success The message status set to DLVD.
Not sure why this is occurring.......No, not using correlation id.
I was able to resolve the issue on this queue by changing the following setting
Under the PROCESSING tab, under XI SETTINGS
Time period for Duplicate Check for EO(IO) (secs) it was set to 86400
I have changed this to 300 seconds and the adapter has now gone green.
BUT......
That said, I have the exact scenario on another sender JMS channel set to 300 seconds and it exhibits the same issue.
correlation settings:
Set XI message id to = GUID
Set Xi conversation -
Sending IDoc Batches to SAP: Issue with Header Mapping for SNDPRN
We are sending batched IDocs from XI to SAP. We need the individual IDocs to reflect different SNDPRN values. Our mapping creates the different IDoc EDI_DC40 record correctly with different SNDPRN values. However, XI wipes out the SNDPRN values in the payload. When we define Header mapping to get the Sender Party as the XPath to the SNDPRN in the payload, then the header mapping errors out because the XPath returns multiple values.
I wanted to know if anyone has successfully implemented sending IDoc batches to SAP from XI with different SNDPRN values.
Your feedback is appreciated.
Jay Malla
Licensed To Code
Genentech SAP XI TeamHello,
I have the same problem. I want XI send an IDOC with the SNDPOR, SNDPRT and the SNDPRN that are in the EDIDC40.
<u><b>I find this in sap.help : </b></u>
<i>Mapping
The IDoc adapter does not make any special demands on mapping. The IDoc adapter must simply be provided with an IDoc XML structure at the Integration Server outbound channel. This either already exists or must be generated by using a mapping.
If the IDoc XML structure contains a control record, it is deleted and created again by the IDoc adapter. If you want to include additional values in the control record, you must select the Apply Control Record Values from Payload checkbox in the parameters in the communication channel and provide a corresponding mapping for the values.
You can include the values from the following fields in your IDoc control record:
MESCOD, MESFCT
TEST
EXPRESS
STD, STDVRS, STDMES
SNDSAD, SNDLAD
RCVSAD, RCVLAD
REFINT, REFGRP, REFMES</i>
http://help.sap.com/saphelp_nw04/helpdata/en/b9/c5b13bbeb0cb37e10000000a11402f/frameset.htm
Perhaps we must use party configuration but I don't know how do this !
Regards,
Chris<u></u> -
Where can i Download maps for nokia c3-00 the one that can be lunched even without internet connection?
There are no offline maps for c3-00,you can use google maps but they need an internet connection.
If you find this post helpful please click the white star,Thanks. -
I couldnt find Nokia map for nepal, can anybody help me with this that when nokia map will be avialable for nepal. Or it not gona ever be avialable.?????????
If it is asking for internet connection, it wants to download the map. To stop this from happening download Nokia Map Loader here: http://europe.nokia.com/explore-services/maps/download/nokia-map-loader Use Nokia Map Loader to upload maps to your phone, then there is no need to go on the internet the whole time.Don't click on the link. Copy it and paste in in the address bar of a new tab or window.
Message Edited by quinton55 on 19-Mar-2009 09:35 AM
Nokia N95 8GB V30.0.018 **Kudos are very welcome** -
Ovi map for other country downloaded and installed...
I've used the Ovi Suite 2.2.0.245 and connected with N900 but selected PC suite mode instead of Mass storage. I read alot that you have to select Mass storage for N900, but Ovi Suite won't then be connected with my phone, but works with PC suite.
I wanted to transfer country maps to the phone so I can use it offline. Selected the Map and downloaded and it said transfered to phone...so everything seems good. But when I go to open those maps on the phone...I can't find them anywhere at all! I'm not sure where they are.....I've check the 'ovi map', then the 'cities' folder but nothing. There are other files there but not titled with the cities i've downloaded. I tried to open those files anyways (having a "?" as their icon) and then selected I think 'Application' or something as ways to open the file.....then needed to download but 0kb...??? it then said unable to download, the file could be corrupted. So now..I'm stuck.
I don't know where the maps were transfered to. Oh and I check on the Ovi suite Map tab and selected my device, and it should alllll the cities and countries listed in my device (phone) already....but I can't find/open them on the phone. Much help and guidance would be appreciated!
Thanks in advance.
Solved!
Go to Solution.Thanks for reply. I did check the cities folder and it's not there...I've downloaded New York and cannot find it. Also, the folders I saw were all a few kb and not the appropriate size.
I went to ovi maps on the n900 and only showed me where I am, I wanted to open new york map but don't know where and how. I clicked on search and entered new york but then ask me to connect to the internet. It did and it worked but then that means I have to connect.
It said I can be offline for N900:
http://www.nokia.com.au/get-support-and-software/download-software/maps-support/how-to/maps-for-n900
I thought it can be veiwed offline, so how can I? I wanted to open the map when overseas but if there's no internet connection and I have transfered the map on the phone previously, I won't be able? =(
Maybe you are looking for
-
I lost my computer to a lightning strike and the replacement computer came with GB 10.0.2. It works fine and I want to keep it working, but I lost the legacy instruments at the same time and there were a few of those that I used regularly. I found a
-
ITextSharp PDF library and VB Controls. Need some help ...
Hi there everybody. Mainly for those who are into pdf and in particular iTextSharp library. In this example I have a very simple Label control on Form, with text in it. I want to build a very simple pdf test file with just one A4 page, and draw Label
-
IPhone 5 won't delete messages
I have an iPhone 5 (iOS 7.1.2) Recently I've been trying to delete iMessage threads because they contain a year to a couple months worth of text messages. Initially the thread disappears, but I think it causes the Messaging app to crash because when
-
Hi I am developing a report to display the MRP results collectively. what is the table from which i can get the MRP results like current stock, Purchase requisition and purchsae orders for various time periods. Solai [email protected]
-
Shopping Cart Reappears in Sourcing Cockpit Even After PO Ordered
Hi Experts, I have a big problems where all SC reappear in shopping cockpit even after has ordered PO. Strangely and sadly, it's only happen at production system. But somehow, my friend has implemented Note 1432540 - Sourcing relevant flag is not up