Passing custom field in contract in SRM to contract in ECC

Hi,
We are using SRM 7.0 with ECC 6 (no EHP). We're planning to use central contract distributed with IDOCs. Our contract in ECC has custom field added in the header. We have tried and successfully pass the contract from SRM to ECC (using IDOC BLAORD03 and COND_A).
I know we can create custom field in contract in SRM, but how to pass the value in the custom field in SRM contract to custom field in ECC contract? Do we need to edit IDOC BLAORD03? Is it possible?
Best regards,
Yosea

Hi,
Does anyone know the answer?
John

Similar Messages

SRM Limit Confirmation - Pass custom fields

I have a requirement to pass custom fields when doing confirmation for Limit PO line item. What I heard is that the SES is not created by idoc instead a direct bapi is called. But how to I extend / pass custom fields in that case?
Any thoughts please?

Dear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team

Custom field in the search criteria of contract management in SRM - POWL

Hi,
I have to add a custom field in the search criteria of the POWL query for Contract Management. I have done adjusting of the POWL by adding the custom field in the /SAPSRM/S_POWL_RESULT_CTR and /SAPSRM/S_SEARCH_RESULT_CTR. I have created entries in TREX and Field cat but still the field is not visible in the query.
Please let me know how can i get the visibility of custom field on the POWL query for contract.
Regards,
Geeta

Hi,
Try to delete powl query cache using report POWL_D01.
Regards,
Marcin

New Customer Field in Shopping Cart (SRM) with default value

We have requirement to add new Customer field in Shopping cart (SRM 4.0) and assign a default value to it.
We have added the custom field and also assigned default value 'X' to it using BADI BBP_CUF_BADI_2 method MODIFY_OUTPUT. Problem we are facing is in case user changes the value and unchecks the custom field then it gets overwritten by default value once the shopping cart is saved. We have followed steps mentioned in link below in order to add custom field and populate it.
/people/nanda.kondagunta/blog/2006/10/23/how-to-create-custom-fields-in-srm
KR Jaideep,

Dear Poster
Your thread has had no response since it's creation over
2 weeks ago, therefore, I recommend that you either:
- Rephrase the question.
- Provide additional Information to prompt a response.
- Close the thread if the answer is already known.
Thank you for your compliance in this regard.
Jason Boggans
SAP SRM SDN Moderator

Addign new customer field in Shopping cart SRM with default value

We have requirement to add new Customer field in Shopping cart (SRM 4.0) and assign a default value to it.
We have added the custom field and also assigned default value 'X' to it using BADI BBP_CUF_BADI_2 method MODIFY_OUTPUT. Problem we are facing is in case user changes the value and unchecks the custom field then it gets overwritten by default value once the shopping cart is saved. We have followed steps mentioned in link below in order to add custom field and populate it.
[/people/nanda.kondagunta/blog/2006/10/23/how-to-create-custom-fields-in-srm|/people/nanda.kondagunta/blog/2006/10/23/how-to-create-custom-fields-in-srm]
KR Jaideep,

Hi,
In badi BBP_CUF_BADI_2, method MODIFY_OUTPUT,
are you doing something like this?
CASE IV_FIELDNAME.
WHEN 'YOUR_CUSTOM_FIELD'.
    IF IV_VALUE IS INITIAL.
      MOVE 'YOUR_DEFAULT_VALUE' TO EV_VALUE.
    ENDIF.
ENDCASE.
Best regards.
Edited by: Pablo Casamayor on Jul 23, 2009 12:32 PM

Passing Custom fields to Req and PO

Hi,
We are on SRM 5.0 and ECC 5.0.We are using the classic scenario .I am trying to transfer the catalog ID from SRM shopping cart to R3 Req .There are number of threads in this forum that describe the procedure, which i understand.
But now if the Req is converted to PO in R3 either manually or auto, does the custom fields also get transferred automatically ,if i maintain the same custom fields in CI_EKPODB & CI_EKPODBX? or is there anything else i need to do.
Thanks
Raghu

Hi
Besides BBP_CUFMAP, you have to of course :
- create the same Zdata element datain ECC as you have done it in SRM.
- maintain CI_EKPODB with append of your Zdata element
- create CI_EKPODBX and activate it !
Then you will be able to sea your Zdata element (or CUF) in the EKPO table.
You don't need to use BBP_PO_INBOUND !
Re: Update Custom Fields in PO - BBP_ECS_PO_OUT_BADI
Re: Mapping fields in SRM with R/3
Also, Please refer to SAP OSS Notes 672960 and 485891.
The BADIs in SRM which can used in this case, using transaction SE18 are 
BBP_TARGET_OBJECTS
BBP_TARGET_OBJTYPE
In SRM Customization
In the following step : " Go to SRM --> SRM Server --> Cross Application Settings --> Define Objects in Backend System --> go to external procurement and select the function from the drop down box", it says "purchase order if item data is complete, otherwise Purchase Requsition.
Related links for source code and other configuration ->
R3 field is not populated????
implementation of BADI BBP_ECS_PO_OUT_BADI in SRM. and BBP_PO_INBOUND_BADI
Custom field values are not being transfered to the backend system
Re: custom field values not passed to R/3
Do let me know, incase you face any issues.
Regards
- Atul

Custom Fields in the PO SRM-7.0

Hi Experts:
I Write for the following thema
I have added two fields in the view 'V_PO_DODC_HD_GN_BD' component '/ SAPSRM/WDC_DODC_PO_H_BD1', which through configuration only appear in the types of purch-orders ZBES or ZIPO, these fields make it through these steps in the 'SPRO' , this steps are:
SPRO -> SAP Supplier Relationship Management -> Server SRM ->Cross-Aplication Basic Settings -> Extensions and Field Control (personalization) -> Configure Field Control->Configure Control for Fields on Header Level.
Questions in the 'Dyn. Customer Class' should I put some sort so you can read my search help? Or the 'customer Method' should I define it? could help me understand the use of these 2 points?
As mentioned already the fields are showing on my screen of SRM,
However, they have asked me now who helps place a field that belongs to the values corresponding to 'ECC' table 'EIKP' field 'stabe' and 'EIKP' field 'EXPVZ'.
The issue here is as Complete help and that these fields are not displayed in the view 'V_PO_DODC_HD_GN_BD' component of the above.
How should you add the 'search help' to that view if the fields do not appear?, and, how do I tell the system to show for each field the corresponding value?
On the other hand, asking me to do a transfer of the selected ECC values, how this is done?
I researched and helps provide within SCN mentioned that I should do so through RFC destinations, but that method should be to integrate the code? What are the steps I must do to accomplish this?
I have suggested several readings of SCN should be done through the following configuration
SPRO à SAP Supplier Relationship Management à SRM Server à Business Add-Ins à Control Extended Classic Scenario à Transfer Purchase Order Data to Logistics Backend
However, do not know what is the correct way to implement it? For such fields are transferred to ECC and how do I know if properly performed effectively sending the values of those fields?
I confess I am new to SRM was able thanks to your support and 'SCN' make progress on some issues, but now if I have stumbled upon something that totally unaware.
Thanking the community for the help that they can provide me take this opportunity to send a cordial greeting.
If you prefer to contact me via Skype or Mail them my information I provide my user skype machetigue and the gmail: m.achetigue@ gmail.com.
I live in Mexico but no matter what time you wish to connect with me at any time. thanks.

Hi,
See these related threadS:
Re: Replicating additional fields (R/3 4.7) to SRM product master
Transfer Inforecord Conditions Scales to SRM Product Master
https://www.sdn.sap.com/irj/scn/threadmessageid=6669812#6669812
Extending SRM Product Master
BR,
Disha

Customer Creation - Want to pass custom field data to KNA1(Customer Master)

Hi,
I have created BAPI for customer creation which uses standard program RFBIDE00 for customer creation.
I have appended new custom field(ZZATTR1) in the table KNA1 and its currosponding stucture used in the standard program BKNA1.
Import parameters of my BAPI is one structure which is having this custom field, on executing this BAPI it creates the customer but data which I give through this field is not getting transfered in the table KNA1.
This sstandard progaram uses file to containing customer information, In the BAPI I on the data from the structure to the file and further it gets submitted to the program.
My requirement is to pass the data of teh custom field which I have created, How to achieve this ?
Pls Suggest.
Regards
Vishal

Hi Vishal,
When implementing a customer exit (i.e. field, user etc) have you ever wanted to be able to read additional
field values available in the main SAP program but not available in your exit. Now with the use of
field-symbols you can have access to any field available in the main SAP program. The code below
demonstrates how this is done within a field exit on BSTNR which can be tested using transaction
ME21. Information on creating field exits can be found here.
FUNCTION field_exit_bstnr.
""Local interface:
*" IMPORTING
*" REFERENCE(INPUT)
*" EXPORTING
*" REFERENCE(OUTPUT)
create field symbol
FIELD-SYMBOLS: <status>.
Assign value of variable from calling prog to field symbol
ASSIGN ('(SAPMM06E)RM06E-BSART') TO <status>.
Display value retrieved in message
Note: Messages of type i and w are not allowed
IF sy-subrc = 0.
 MESSAGE e003(zr) WITH <status> 'kkk'.
ENDIF.
ENDFUNCTION.
Rewords some point if it is helpful.
Rgds,
P.Naganjana Reddy

Passing custom fields to BAPI

Hi All,
How can i handle the Quantity field using BAPIPAREX?
EX.
I have added the following custom fields to the standard table EKKO.
 zf_base (Price per ton, CURRENCY)
 zreq_tons (Tons Required,QUANTITY)
 zpo_issue_date (PO Issue date,Date)
Here I am using the bapi 'BAPI_PO_CREATE1' to create Purchase Order. How can i pass the above fields to BAPI.

U dont have to create a Z verion. u can use extensionIN parameter. take a look at the bapi funtion module documentation. here is the hint,
Customer's Own Fields (Import Parameters)
This table allows you to add to the import parameters of the BAPI without modifying it.
The customer enhancement SAPL2012 allows you to add to or modify the PurchaseOrder.Change and PurchaseOrder.CreateFromData1BAPIs by:
 Adapting existing SAP database tables
o Adding customer-specific fields to SAP tables
o Including existing database fields
 Including additional customer-specific database tables
The following BAPI Table Extensions are available:
 BAPI_TE_MEPOHEADER
 BAPI_TE_MEPOHEADERX
 BAPI_TE_MEPOITEM
 BAPI_TE_MEPOITEMX
 BAPI_TE_MEPOACCOUNTING
 BAPI_TE_MEPOACCOUNTINGX

Passing customized field of accounting in BAPI_INCOMINGINVOICE_PARK

Hi All,
I am using BAPI BAPI_INCOMINGINVOICE_PARK to park the invoice, we have added some custom field in FI,
For example we have added field line of product in the FI.
When i park the invoice i need to pass accounting data into BAPI, i could able to pass cost centre , profile centre ,controlling area other than field Line of PRoduct becuase this field is a customized one.
Since i am not able to pass line of producti, when invocie get post and generate accounting document , line of product pass blank value into it.
So give me solution of how can i pass the this customized field of accouting in BAPI BAPI_INCOMINGINVOICE_PARK
Thanks,
D.prabhu

The BAPI_INCOMINGINVOICE_PARK appears to be a non-extensible BAPI, that means EXTENSIONIN parameter required for BAPI extension is not provided for, so you cannot pass or retrieve data for custom fields using this BAPI.
Find some other BAPI related to INVOICE where EXTENSIONIN parameter is available in Importing or Tables.
Cheers!!!

Passing customized field to workflow

Whenever I pass user USusername, the wfl returns a value but whenever I passed BPobjid, the wfl encounters and error eventhough the rule test returns a value..
the BPobjid if I may add is a customized field. And if shown at bbp_pd contains 10digit BP number.
I'd made sure that the Function module called by the rule can handle BP0000000000, 0000000000, formats.. but then, theres no value being returned.
Is there a way where I can see the value passed by the WFL to the rule container? I even tried to test hardcoding values from the WFL Binding with (BP0000000000, 0000000000, formats).
Thank you
Cindy Sy

Hi Lakshmi,
Create Workflow container
swc_container lt_container.
swc_create_container lt_container.
Fill internal table with data
The container type and the internal table type should be same, U can use a structure to define both.
Declare a structure with all the fields.
Define a conatiner of same type of structure in worklow and set it in wait for event setp.
swc_set_table lt_container '<container_name>' lit_int_data.
CALL FUNCTION 'SWE_EVENT_CREATE'
 EXPORTING
 objtype = lc_objtyp
 objkey = lv_objkey
 event = lc_event
 IMPORTING
 event_id = lv_eventid
 TABLES
 event_container = lt_container
 EXCEPTIONS
 objtype_not_found = 1
 OTHERS = 2.
Rgds,
Prakash
Message was edited by: Prakashsingh Mehra

LORD: ERP Quotation passing custom fields to ERP system

Hi Gurus
I extended the ERP quotation screen with custom fields which are same like ERP fields using AET and generated the setter and getter and methods for those fields in CRM system , but after entering the values into the custom fields and pressing enter the values are not getting retained , I mean after pressing enter it will communicate with ERP system using RFC call and return back to the CRM systme after that the custom fields are becoming empty, how can I track those values after coming back to the crm system .
Thanks & Regards
Madhu

Hi Madhu,
I am facing same problem.
Could you please share your ideas?? It will be helpful to several guys.
Thanks in advance,
S.Meganadhan.

Getting error when passing custom fields to BAPI extension

Hi ,
I have problem with standard BAPI_PO_CREATE1 bapi function.
ERROR DETAILS
when FM:- BAPI_PO_CREATE1 first time executed getting error "Check item number 30 in table EXTENSIONIN" and PO not creating.
when using function key reverse(cntl+f12) in BAPI_PO_CREATE1 in same execution ,po document creating ,but data is not papulating custom field.
CODE USING IN MY PROGRAM
DATA :
       ltab_extensionin TYPE TABLE OF bapiparex,
       wa_extensionin TYPE bapiparex,
       wa_BAPI_TE_MEPOITEM type BAPI_TE_MEPOITEM.
wa_bapi_te_mepoitem-po_item = wa_itab-item.
wa_bapi_te_mepoitem-zvsart = wa_itab-ship_type.
move 'BAPI_TE_MEPOITEM' to wa_extensionin-structure.
move wa_BAPI_TE_MEPOITEM to wa_extensionin-VALUEPART1 .
APPEND wa_extensionin TO ltab_extensionin.
   CALL FUNCTION 'BAPI_PO_CREATE1'
    EXPORTING
      poheader         = wa_pohead
      poheaderx        = wa_poheadx
      testrun          = ' '
    IMPORTING
      exppurchaseorder = v_po_number
    TABLES
      return           = itab_return
      poitem           = itab_poitem
      poitemx          = itab_poitemx
      poschedule       = itab_posched
      poschedulex      = itab_poschedx
      poshipping       = itab_poshipping
      poshippingx      = itab_poshippingx
      extensionin      = ltab_extensionin.
Could one of u help me ?? .
Regards,
Nayak

Hi,
Try populating the ltab_extensionin as the code given below:
Maybe it can help you.
Constants: c_flag_bape_vbak TYPE char10 VALUE 'BAPE_VBAK', " Constant
                 c_flag_bape_vbakx TYPE char10 VALUE 'BAPE_VBAKX'," Constant
wa_bape_vbap-vbeln             = space.
   wa_bape_vbap-posnr            = wa_order_items_in-in_linenumber.
   MOVE c_flag_bape_vbak TO wa_extensionin-structure.
   MOVE c_flag_bape_vbap TO wa_extensionin-structure.
   CALL METHOD cl_abap_container_utilities=>fill_container_c
     EXPORTING
       im_value       = wa_bape_vbap
     IMPORTING
       ex_container = wa_extensionin-valuepart1.
   APPEND wa_extensionin TO it_extensionin.
   CLEAR : wa_extensionin.
   MOVE c_flag_bape_vbapx TO wa_extensionin-structure.
   wa_extensionin-valuepart1+0(10) = space.
   wa_extensionin-valuepart1+10(6) = wa_order_items_in-in_linenumber.
   wa_extensionin-valuepart1+80(3) = abap_true.
   APPEND wa_extensionin TO it_extensionin.
   CLEAR : wa_extensionin.
Regards,
Shweta

Custom fields replication in sales order from CRM to ECC

Hi Experts,
We have added a few custom fields in CRM 7.0 (Ehp1) using AET. The BDoc BUS_TRANS_MSG has been automatically extended with these custom fields.
On ECC side also, same custom fields have been added to VBAK and VBAP, using APPEND STRUCTURE. Fields were added to ADDITIONAL DATA TAB B in VA01 / VA02 transactions.
Our issue is, when a sales order is created in CRM, it is getting replicated on ECC. But, only standard fields are getting replicated. The custom fields that we have added are remaining empty on ECC side.
In CRM --> txn SMW01, we can see that the BDOC is populated with custom fields also.
What is it that we have to do to ensure that custom fields are also replicated to ECC. Do we need to maintain field mapping between CRM and ECC, for custom fields, manually. How and where do we have to maintain the mapping. Also, please let me know the BADIs / exits that need to be implemented to achieve the above functionality
Regards,
Manohar

Hi Manohar
You can map these custom fields using the badi CRM_DATAEXCHG_BADI. Please see the documentation of the badi in SE18 in your system for further details.
Regards
Gavin

Central contract in SRM 7.0 with ECC 6.0

Hi
We are using SRM 7.0 with ECC 6.0
When we create contract in SRM 7.0 & Trying to distribute to Backend as Contract, It is showing error in BBP_PD as below
HEADER I1015 Awaiting Approval
HEADER I1021 Created
HEADER I1038 Complete
HEADER I1141 Released
HEADER I1180 Document Completed
HEADER I1193 In Distribution
HEADER I1195 Distribution Incorrect
0000000001 I1143 Item is Active
Badi BBP_DETERMINE_LOGSY is activated to define backend system
No IDOC is also generated.
No errors in MOnitor also
Not sure what is message type needs to define & what else is needed
Regards,
NNK

HI
Need to do following
1. Keep conidtion types in ECC & SRM same for contract.
2. Also Add message types BLAORD & COND_A manually in ECC in WE20.
Then only it works
Regards,
NNK

Passing custom field in contract in SRM to contract in ECC

Similar Messages

Maybe you are looking for