Passing file name to the field

Hi,
i have a file to jdbc interface.
I have a requirement of passing the timestamp from the file which i pick from the sender side and pass this to one of the field at the receiver side...can someone help me in doing this,
your help would really be appreciated.,
thanks

Hello,
I have a requirement of passing the timestamp from the file which i pick from the sender side and pass this to one of the field at the receiver side...can someone help me in doing this,
You can use a UDF(simple Type) for your requirement. Here is the code
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create(u201Chttp://sap.com/xi/XI/System/Fileu201D,u201CFileNameu201D);
String filename = conf.get(key);
Return filename;
You can use string manipulation for getting the timestamp from the filename e.g substring. Also make sure that in your sender communication channel, the Adapter Specific Message Attributes are checked for FileName.
Hope this helps,
Mark

Similar Messages

Return the file name of the field type BLOB

How can I create the PL/SQL procedure that return the file name of the file insert into the record with a field file_date BLOB.
I have this table:
TEST
with this item:
file_name varchar2(20)
file_date blob
example
I have insert with the OraclePortal Form a record:
file_date Upload the file c:\test1.pdf
I want that the my PL/SQL procedure insert into the field
file_name the value test1.pdf
Regards
Basilisco Giorgio

You may be confused by the error in Excel saying “another user”. Actually Excel cannot tell who (the real human) is editing the file. Based on my research the No.1 possibility of the error is KB2626998.
2626998 Connection to a network document is lost in the 2007 Office system or in Office 2010 after the computer resumes from standby
http://support.microsoft.com/kb/2626998
For Excel 2010, follow these steps:
a. Click Start , click Run , type regedit in the Open box, and then click OK .
b. Locate and then select the following registry subkey: HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Excel\Options
c. On the Edit menu, point to New , and then click Dword Value .
d. Type NetworkAvailableTimeInSeconds , and then press Enter.
e. Right-click NetworkAvailableTimeInSeconds , and then click Modify .
f. In the Value data box, click Decimal , type a number value, and then click OK .
Note This registry subkey sets the time, in seconds, that Excel waits for the network to resume. For example, if you type 15 for the number value, Excel waits 15 seconds for the network to resume. You might have to do some tests in your own environment to
determine an appropriate value. You may have to try multiple numbers.
g. Locate and then select the following registry subkey.
HKEY_CURRENT_USER\Software\Microsoft\office\14.0\common\Internet
h. Repeat step 2C through step 2F again. Reuse the same value that you used previously.
i. Exit Registry Editor.
Feel free to post back. Thanks.
Cheers,
Tony Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please contact
[email protected]

Passing file name variable to the save as dialog

Hi:
I have an event listener that checks if the user has selected the file/"save as" menu and brings up another dialog window asking for some additional information about the client and job. I would like to pass a variable from this custom dialog to the file name field in the standard Save As dialog.
Anybody have an idea how I can do this?
I am using inDesign3 on Windows XP. I am using VB for the scripting.
thanks!!
Dan

Hi: thanks for looking at it.
Actually, I am not calling the save as in my script, the user is clicking on Save As and the event listener I have in the start up folder is picking that up. The event listener calls up a script that asks users to fill in a couple of fields about the specific job and once they do that and click ok, the default inDesign "save as" dialog is brought up. So that is my question -- how to pass the information from my dialog to the standard "save as" dialog (as the file name of the file).
The event listener is of the beforeInvoke on the Save As... menu.
Any idea?
thanks!!
Dan

How to pass the local file name to the workflow in TC OAWD

Hi everybody!
I have to pass the local file name of the image as a parameter to a workflow in TC OAWD.
By debugging I found the FM which starts the workflow - 'ARCHIV_PROCESS_FAXINPUT' . It has two importing parameters : FRONTENDPATH and BASICFILENAME, but they are not used by calling the FM.
Do you have an idea if there is a DDIC table, which contains the local file name or another way to solve the issue.
Thank you in advance.

Hi,
Not sure of what you want.
Have a look at v$session view. Machine column is maybe what you're looking for.
If you want to retrieve the local host executing remote desktop, it's actually not possible natievely, since it's still remote host that is connecting to the database.
Hope it helps.

Is there a way to pass archive file name to the command-line control?

Hi there,
I have been researching the flash media live encoder laterly. But still cannot find confirmed anwsers on the following questions:
1. Is there a way to pass an archive file name to the command-line control when starting an encoder?
2. Can the username/password to the Flash Media Server be saved in the profile? If not, is there any otherway to provide(GUI mode) them automatically,
like as variables to a script?
Thanks a lot in advance.
Helen

1. The only way to inform the command-line encoder about the archive file name is to save the FMLE session profile with the file name. The node for saving the file name is <output><file><path>C:\sample.flv</output></file></path>. The easier way to update the xml profile is to use "Save Profile" option of the GUI mode. If you want to programmatically update the file name, read the profile and update the node before launching the encoder. I hope this answers your question.
2. No. Credentials can't be saved in the profile. The only way to provide them programmatically is to use /ap and /ab commands for the command-line encoder. For GUI mode, there is no programmable option. But still you can try capturing keystrokes.

Pass the text file name to the command prompt using servlet

hi to all,
I have a HTML page that takes the user inputs. Once the user clicks on the submit button on the HTML page, these values will be capture by a servlet and then store into a text file. A new text file is generated each time the user clicks on the submit button.
Now, i need to call a command prompt window and then pass the text file name to another program for execution. Any idea how i can pass the text file name to the command prompt???
Thanx a lot....
kinki

hi, thanx 4 ur reply.
But i not onli want to display the file name on the Tomcat command prompt. I must also able to call up a program to execute the command. If i used System.out.println(); it onli display the value on the console windows. But not executing it... anyway where i can do it???.
thanx...
Kinki

Include Flat file name as a field in the PSA / DSO.

Hi,
I have a requirement to include the Flat file name also in the DSO which is used for loading the data from a flat file source. I have created a new infoobject for File Name in the DSO. Can you guide me from which table I can get this information.
I was thinking of reading this information from the table which stores the file name in a routine in the transformation to the DSO.
I came across the table RSLDPSEL, it stores the Infopackage name and file name. But this does not work when I am using the same infopackage to load multiple files. Thanks in advance.
Regards,
Hari.

Hi,
The main challenge is to get the Technical name of the infopackage in the transformation ( field routine) from PSA (Datasource Source) to DSO for the Filename info object.
Is there any table which stores the Infopackage and the corresponding data target information in BI 7.0 sothat I could use the field routine in transformation to get the Infopackage ID based on the data target (DSO) ?
Once I have the technical name of the Infopackage, my logic is to query the RSLDPSEL table and find the file name based on Infopackage ID.
Please share your thoughts on how this scenario could be realised.
Thanks,
Regards,
Hari

Dynamic File Name - Suppress the Substitue varible

Hi All,
I am doing the scenarios like File name at the recevier end would be dynamic for that i take an extra field NAME mapped with UDF which return the file name dynamically. It is working fine and doing good. But the problem here is , this field is the first field in my target structure so i am getting an empty line in the target file.
So My structure as follows:
MT_BNK01 1..1
NAME 1..1
RECORD 0..Unbound
 --Record_data 0..Unbound
So in the recever side i written as follows
Recordset Structure:: RECORD
RECORD.fieldSeparator = 'nl'
RECORD.endSeparator = 'nl'
But according to this weblog i can suppress the empty line but it is not working
/people/sravya.talanki2/blog/2005/08/11/solution-to-the-problem-encountered-using-variable-substitution-with-xi-sp12
means, NAME is also in the same level of RECORD in the Structure. So How can i pass the structure as ??
I tried to pass the RecordSet Structure: NAME,RECORD
and following parameters, it is not working
NAME.fieldFixedLength =0
NAME.fieldLengthTooShortHandling = Cut
Can you please suggest me what could be the reason. Tell me what information i need to pass the RecordSet Structure and attrubute information also.
One more thing like, My sender side it is not picking the empty lines. What could be the reason. I given fieldSeparator and endSeparator as 'nl'. So to catch the empty line what i need to do???
Thanks in Advance,
Best Regards,
Vijay

Hi Vijaya,
This can be solved. Actually i had the same scenario where i was getting blank line for the header. Suppose Header was carrying the file name after i cut the value i would get a blank line in file.
So i added in content conversion parameter the following line
Header.endSeparator - '0'
then the first line was not blank.
Try this, i think your issue will be solved
Regards,
Ramesh P
Message was edited by:
 Ramesh Parashivamurthy

UDF to capture the source file name or the source folder for mapping

Hi All,
i have 2 files - File1 from File2 from 2 different folders- single comm channel FTP (FCC). i have to pass a constant A and B respectively to a field in target structure.
my options are -
either create a new field in source str populating different constants and then map to the target str
or a udf to get the source file name or the source folder so that i can map the constant using the value mapping/FixValue mapping.
please suggest. thanks.
rajib

Hi,
please use the UDF to determine the file name. Then based on file name either pass A or B to your target field.
The code is as given below. Just tweak the code to pass either A or B as per your requirement.
public String G_GetFileName(Container container) throws StreamTransformationException{
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String ourSourceFileName = conf.get(key);
return ourSourceFileName;
Regards,
Deepak.

Want To Capture The File name Using the SQL Loader

Hi,
I Am loading The Data To Staging Table Using The SQL*developer, The File That need to be Loaded Will be One Of The Input To the SQL*Loader Concurrent Program.
In One Of The Column Of My staging Table I want To Put The File name.
Can We do the Same.
thanks,
Ankit

Not unless you generate the loader controlfile dynamically.. try this.. pass file name as $1 first parameter. Use the below example and modify as per your requirement
1) create table with following table structure
create table temp_table (x varchar2(20),file_name varchar2(30));
2) create data file - test.dat (contains only values for x)
abc
def
geh
ggg
fff
3) create a host file host file - test.sh with following content:
echo "load data
infile $1
append
into table temp_table
fields terminated by ','
(x,
file_name constant "$1")" > test.ctl
sqlldr <usr>/<pwd>control=test.ctl
4) run the host file from unix prompt with data file name as parameter (ensure test.sh has execute permissions)
test.sh test.dat
Hope this helps
Regards,
Bhadri

Selection of Folder/File name using the same Fun.Module

Please let me know if there is a function module which can fetch folder name/File name from the directory path when f4 option of selection screen field is selected. Currently I am able to get the file name using FM F4_DXFILENAME_4_DYNP but the requirment is like I have to select either folder name or the file name depending on user selection.
Note: Please let me know if there is a single Function module which can get folder name or the file name based on the user selection.i.e, if the user want to select a folder he can select or he can select files in the folder for processing

Hi sridhar
try this:
PARAMETER : TXT_FILE(100).
AT SELECTION-SCREEN ON VALUE-REQUEST FOR TXT_FILE.
PERFORM GETFILE.
start-of-selection.
PERFORM GETDATA.
FORM GETDATA.
DATA : FILENAME TYPE STRING.
FILENAME = TXT_FILE.
CALL FUNCTION 'GUI_UPLOAD'
 EXPORTING
 FILENAME = FILENAME
 FILETYPE = 'ASC'
 HAS_FIELD_SEPARATOR = 'X'
 HEADER_LENGTH = 0
 READ_BY_LINE = 'X'
 DAT_MODE = ' '
 CODEPAGE = ' '
 IGNORE_CERR = ABAP_TRUE
 REPLACEMENT = '#'
 CHECK_BOM = ' '
IMPORTING
 FILELENGTH =
 HEADER =
 TABLES
 DATA_TAB = IT_UPLOAD
EXCEPTIONS
 FILE_OPEN_ERROR = 1
 FILE_READ_ERROR = 2
 NO_BATCH = 3
 GUI_REFUSE_FILETRANSFER = 4
 INVALID_TYPE = 5
 NO_AUTHORITY = 6
 UNKNOWN_ERROR = 7
 BAD_DATA_FORMAT = 8
 HEADER_NOT_ALLOWED = 9
 SEPARATOR_NOT_ALLOWED = 10
 HEADER_TOO_LONG = 11
 UNKNOWN_DP_ERROR = 12
 ACCESS_DENIED = 13
 DP_OUT_OF_MEMORY = 14
 DISK_FULL = 15
 DP_TIMEOUT = 16
 OTHERS = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.
FORM GETFILE.
CALL FUNCTION 'WS_FILENAME_GET'
 EXPORTING
 DEF_FILENAME = ' '
 DEF_PATH = '.'
 MASK = ' '
 MODE = ' '
 TITLE = ' '
 IMPORTING
 FILENAME = TXT_FILE
 RC =
EXCEPTIONS
 INV_WINSYS = 1
 NO_BATCH = 2
 SELECTION_CANCEL = 3
 SELECTION_ERROR = 4
 OTHERS = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.
This is a part of my BDC program its working for me u try n reply if it works for u.
regards
vijay

Programaticly changing the (suggested only) file name in the save prompt when signing a document?

When you sign a document in Adobe X (or XI), the system says it needs to save the file first. Is there some way to change the (suggested only) file name to a different value for that save?
Right now, people open a blank form - lets call it formX.pdf. They fill it in and sign it. The suggested file name for the save is FormX.pdf. I can generate a unique file name which i'd like to put in place of the suggested default...

AFAIK, you can't do it with code. Your best option might be to use a form field to show a message to the user when they sign the document with that information.

Path and File name of the attachment

Hello Srm Guys,
Where should be the Path and File name of the attachment are stored for a shopping card Item.
Thanks
Ram

Hello Ram,
Execute the function module BBP_PROCDOC_ITEM_GETDETAIL by providing the item guid,object type . Now it will populate the et_attach importing parameter with the attatchement details.
In the ET_ATTATCH internal table , the field PHIO_FNAME/PHIO_PATH_FILE provides the physical storage location of the document.
Hope this info will be helpful.
Regards,
Mani

Get File name of the inbound file during mapping

Scenario: to read the file name of the inbound file (which has date required for the mapping) during runtime.
The requirement is to read the date of the inbound file (passed to the XI pipline by the file adapter) and populate the same in the outbound mapping structure.
Any idea about how to do this?
(I went through few options of using java.util.map. not successful yet)

Hi Anand,
I posted the same question a time ago, without any help....
Can I find out the full filename of input file in message mapping?
Posted: Nov 23, 2004 1:00 PM
I have in XI 2.0 the following scenario :
In the inbound fileadapter I read my input file. The filename of the input file is part fixed, part variable (Like INDATA01.txt, INDATA03.txt, etc).
So in my Adapterconfiguration, I specify the filename with a wildcard (INDATA*.txt).
What I now want to do, is in my Message Mapping use the full filename , so I can do something different for every filenumber. Is there a way where I can get the full filename available in my message mapping (I did not find the filename in the XML in the message trace).

Should the web page address be included in the file name in the meta data dialog box?

In the page properties > meta data > below is a field with the label file name: (the the area to type in the field), after the field, it is labeled .html.
I have 2 questions here.
1. If I type in http//:www (my page url), do I include .html at the end? I didn't know if this is automatically added because it is off to the side of the field?
2. If I type in the entire URL address: http//:www (etc, etc).html, after closing the page properties dialog box, I make it a habit to double check my work. What happens is the http//:www.xxx changes to (htttpwww.xxx). It drops the //: on the URL.
So would it be better to just type in www.xxx (without the http//:www.xxx)
and do you type in the .html at the end?
I am assuming this will help with SEO page ranking or at least makes it easier for the search engines to crawl your site??
I hope this makes sense.
Advise would be very helpful.
Ben

You are absolutely correct with the URL Ben. Taking your above example, you just need to type in "Services" in the file name and the webpage will be exported as services.html and the URl will be www.xyz.com/services.html.
All the webpages (be it parent page or child page) gets physically saved at the root directory of your website on the server (where your website resides).
This name is just the name of the file using which it is physically stored and called from the server. It does not help search Engines to crawl deeper inside the website.
As I explained, "name which you wants the .html file to be stored with" here means the name of the physical file which is getting saved on the server.
Most users leave the file name same as Page name. If you have it different from page name then this will be the workflow :
Page Name : About
File Name : test
domain : www.mysite.com
Now if you are using a Menu Widget, it will list "About" in the Menu. And when end user will click on "About" then it will call the file named "test.html" from the server location (where all the files of your website are stored).
And it will open a page with address "www.mysite.com/test.html"
Hope I am able to explain the concept of File Name here. Please let us know if you have further queries on this.
Regards,
Sachin

Passing file name to the field

Similar Messages

Maybe you are looking for