PASSING PARAMETER IN SQL STATEMENT .
HI,
Can any one tell me how to use on of the field name as a parameter in the same sql statement ? Here is what i am looking for :
SELECT EMPNO, DEPTNO, (SELECT COUNT(ORDERNO) FROM ORDERS WHERE DEPTNO = :DEPTNO AND EMPNO = :EMPNO) TOTAL_ORDER FROM EMP;
Here the embeded sql statment should take the paramter :DEPTNO , :EMPNO from the main sql statement. That means , each DEPTNO, EMPNO should be passed as a aparameter to the embeded SQL statement.
Thanks
Feroz
WHATS THE CONACT, ||, +, HOW TO USE IT, CAN U GIVE ME AN EXAMPLE.
SORRY , HERE IS THE ACTUAL THING WHAT I AM LOOKING FOR, I WANT TO GET THE MEDIAN AND MODE VALUE IN ORACLE, BUT COZ ORACLE DOES NOT HAVE IN BUILT FUNCTION TO ET THE ABOVE TOW , I WROTE MY SQL STATEMENTS, FOR EXAMPLE THE MEDIAN OF SAL FOR DEPT 20 IS IS
SELECT AVG(SAL) FROM
(SELECT RowNum The_Rownum, SAL FROM
(SELECT SAL FROM EMP WHERE DEPTNO = 20 ORDER BY 1)) V
WHERE V.The_Rownum = ( SELECT FLOOR((COUNT(SAL)+1)/2) FROM EMP WHERE DEPTNO = 20)
OR V.the_rownum = (SELECT CEIL((count(SAL)/2) + 1/2) FROM EMP WHERE DEPTNO = 20)
This median value ncalculation i can put in a functio and return it, but for a record os 1,800,000 volume, calling this function that many times, the sql never executes. It just hangs. so i thought if i can emabede the whole calculaton in the main sql statement instead of writing a function and calling that function in the sql statement. But the median calculation needs the department no as a parameter to calculate the median for that perticular department. Here , where the requirement of PARAMETER comes. ANY IDEA ???
Thanks
Feroz
Similar Messages
-
Pass parameter to sql statement in query manager
Hai to all,
I want to pass the percentage as the parameter into the sql statemnet.i what to execute it in the query manager.
If i execute that statement then cann't found the tablename error is coming.
Other than the data in the table (general data) pass to the parameter in the sql at runtime.
for example:
select [%0] *100
how to pass 10 to that sql statement.
Please help me...
Regards,
Raji.Hi Ramya,
You can create a SP with parameters to accept and then execut this SP from SAP Business One Query Manager by passing the parameter (in your case 10). The result will be as desired.
Ex:
Create this Procedure in SQL Management Studio
create proc Test(@a as int)
as
begin
select (@a*100)
end
To Execute the Query use this Query and pass the desired values with parameters
execute Test 10
Regards,
Reno -
Passing parameter into SQL statement in Crystal Reports
Hi all,
I would like to call Crystal Reports in JSP. I can handle it well now. But I hope to let user input their selection criteria before printing out the report. I know how to get the parameter value in JSP, but I really dunno how to pass these parameter values into the SQL statement in Crystal Report. Actually, is it possible to do so?
If anyone has idea, please tell me. Thx Thx!
Regards,
BettyDear Sir,
I want to use Crystal Report as a web base using JSP. But, I am getting how to call .rpt file in .jsp file & passing of parameter.
If you have any idea, please reply as early as possible
Thanking U.
My userid = [email protected]
Regds
Pankaj.. -
How to Passing parameter in SQL.For Example,Table name=&From_Clause.It will asking table name at runtime.How to assign table name based on user.
Hi,
796776 wrote:
It will returm error.what problem in this
Select * From Emp a,
(SELECT CASE
WHEN USER = :UserType
THEN 'scott.Dept'
ELSE 'scott.order'
END AS b
FROM dual)
Where a.DeptNo= b.DeptNo &WhereClauseIt's hard to guess, from an example like this with so many errors, exactly what you're trying to do.
Please post a description of the problem, including CREATE TABLE and INSERT statments for any tables you need (unless you can state the problem using commonly available tables, such as those in the data dictionary or the scott schema), a few values of a parameter (or examples of different user names, if USER acts like a parameter) and the results you want from the same data for each value.
For example
"In addition to the scott.dept table, I have a table called my_dept: CREATE TABLE my_dept ...
which has this data: INSERT INTO my_dept ...
I need a script such that, when user scott runs it, the results are ...
but when any other user runs it, the results are ..
As you can see, the difference is ..."
Table names must be explicitly given when a SQL statement is compiled. That's why I usggested a preliminary query; so by the time you compiled the main query, the table name would be known and could be passed in a substitution variable.
If you really want to do it in one query, you can do a UNION of two queries, one of which returns nothing because of the parameter. It's not very efficient. -
Passing Parameter to SQL-Query
Hello ,
i have an SQL Query as Data Source of my Crystal Report . I d like to pass the parameter to my SQL-Query.
Parameter ?city
Query1
select
Order ID,
City, -- How to pass my ?city here
Amount
from Orders,
thanx ..You can do this by using the 'Add Command' feature.
Click Add Command -> Create your ?City Parameter -> type SQL statement:
select
Order ID
where City='{?City}'
Make sure you add single quotes around your parameter.
Regards,
Zack H. -
Pass ORG_ID as sql statement for parameter in request set
We are in a multi-org environment. We are running the request PRC: Generate Draft Revenue for a Single Project as part of the request set. We want the request to automatically fill in the open pa period as the accrue through date. We have been using the SQL Statement below as the value for the accrue through date parameter.
select end_date
from pa_periods_all
where status = 'O'
and current_pa_period_flag = 'Y'
Unfortunately that does not limit to a specific company. We a company that still have DEC-05 while another has an open period of JAN-06. This is causing the program fits. How do I pass the org_id to the request? [in beginners terms please]
Thanks.
AnneNo idea what might be wroong without more info...
Do some output. Test the ${params.id} variable passed to the second jsp. If that is correct, then error is in the select statement or display of jsp2. If it is correct the error comes from jsp1.
If I have to guess, then I would say the error comes from JSP1, and the ${row.vac_id} should only be called once. In which case I would do something like this:
//in jsp 1
<c:forEach var="row" items="${results.rows}" varStatus="counter" >
<c:set var="vac_id" value="${row.vac_id}" scope="page"/>
<tr>
<td>${vac_id}</td>
<td><a href="vacancydetails.jsp?id=${vac_id}">More</a></td>But that is a guess only...
Errr... Hold on to that as reference, but the it is entirely likely that I misspelled ${params.id} It may be ${param.id} I forget and away from my machine right now... -
Passing parameter into select statement by using function in discoverer
I have created two functions in database named Period_in and Period_out and a global variable g_period_name
I have called Period_out function in VIEW(Select statement where condition).
I have registered Period_in function in discoverer admin then created calculation (called Period_in(:input parameter))in discoverer plus.
My expectation is user will enter period name and that will hit Period_in function and returns 1 and stores entered period name in g_period_name at runtime. then VIEW will executed and fetches data.
But i am getting no data found.
Problem is 2 functions running at the same time in select statement. Please help me to overcome this. Thanks in advance
FUNCTION period_in (p_period VARCHAR2)
RETURN NUMBER
AS
BEGIN
g_period_name := p_period;
RETURN 1;
END period_in;
FUNCTION period_out
RETURN VARCHAR2
AS
BEGIN
RETURN g_period_name;
END period_out;You can use this code:
WITH cte
AS ( SELECT EmpID ,
EmpName ,
[dbo].[udf_testFunction](EmpID) AS testfunctionvalue
FROM #Temp
SELECT EmpID ,
EmpName ,
testfunctionvalue ,
testfunctionvalue * EmpID ,
testfunctionvalue + 2
FROM cte
But using scalar functions in select clause can hurt the performance. Please see this link:
SQL Server Scalar User Defined Function Performance
T-SQL Articles
T-SQL e-book by TechNet Wiki Community
T-SQL blog -
Passing parameter in sql reports
Hi all,
I created a sql file to generate a sql*report, in which i am passing a parameter and i stored it in the respective top.
I created a executable, program in which i passed the parameter as usual.
But while i submitted the request, it is not getting completed.
please help
--regards
--RajDo you spool the output to a File?
If you do, then maybe the filename you are using is locked for some reason. Try using a different file name. -
How to pass parameter into sql block?
example code
@script.sql a b c d
Inside script
DECLARE
cursor cur is select col1 from table where col1 in ('a','b','c','d','e');
BEGIN
END;
Not sure 1) The the total number of parameters will be passed at run time
2) Not sure of case, could be lower upper or both....
Please help...do you have different queries which are defined to use different numbers of parameters, OR (more likely) sometimes you just want to pass less parameters?
sqlplus / @file1 "a" "b" "" "" ""
now I only passed 2 "real" params, and 3 blanks. that way, sqlplus still has the values of &3 - &5 defined, and everything works fine. you'lll need either single or double quotes (or perhaps single quotes within double quotes) depending on your os, version, etc. -
Using passed values in SQL statements
Using Adobe Livecycle Designer 7, we wish to populate a pdf document with values from a MS SQL database. The values will change depending on the ID of the record called for.
We can already populate the form using SQL (SELECT firstname FROM names WHERE id = 1), but we need to populate it based on a 'passed' value in a url (http://www.mysite.com/mypdf.pdf?id=1).
When we try to include this into the SQL (SELECT firstname FROM names WHERE id = request.id) we get an error. Could anyone provide us with the correct syntax that will allow us to populate the form based on the ID passed in a URL?
Many Thanks
CraigHi all of you,
I do have a problem with coding correctly a form I am designing sing the Adobe Livecycle . In one of the field, there is an underlying field that when you exit the first name field or the Middle Initial field or the last name, it should all pass the respective values to the underlying field which becomes visible on printout. I do have this code I wrote on the exit event, but do not understand why it it not working. Please, can anyone tell me why it is not working or help me out on a better way of making it work.
xfa.host.messageBox("Check this");
if (EMPFNAME.rawValue <> " " ){
xfa.host.messageBox("EMPFNAME");
EMPNAME.rawValue = String(EMPFNAME.rawValue) + " ";
if (EMPFNAME.rawValue <> " " )&&(EMPMI.rawValue <> " "){
EMPNAME.rawValue = String(EMPFNAME.rawValue) + " " + String(EMPMI.rawValue) + ".";
var s = EMPMI.rawValue;
EMPMI.rawValue = s.toUpperCase();
if (EMPFNAME.rawValue <> " " )&&(EMPMI.rawValue <> " ")&&(EMPLNAME.rawValue <> " "){
EMPNAME.rawValue = String(EMPFNAME.rawValue) + " " + String(EMPMI.rawValue) + "." + " " + String(EMPLNAME.rawValue);
var s = EMPMI.rawValue;
EMPMI.rawValue = s.toUpperCase();
Thanks
Lucky P -
How to pass parameter in sql developer for debubing record type
DECLARE
IB_BP_BANK_ACCOUNT_BUF PL/SQL RECORD; ---record type
IP_BP_ID NUMBER;
IOP_ACC_SEQ_NO NUMBER;
OP_ERROR VARCHAR2(200);
BEGIN
IB_BP_BANK_ACCOUNT_BUF := NULL;
IP_BP_ID := NULL;
IOP_ACC_SEQ_NO := NULL;
ORAGTW11.MAINTAIN_BP_BANK(
IB_BP_BANK_ACCOUNT_BUF => IB_BP_BANK_ACCOUNT_BUF,
IP_BP_ID => IP_BP_ID,
IOP_ACC_SEQ_NO => IOP_ACC_SEQ_NO,
OP_ERROR => OP_ERROR
/* Legacy output:
DBMS_OUTPUT.PUT_LINE('IOP_ACC_SEQ_NO = ' || IOP_ACC_SEQ_NO);
:IOP_ACC_SEQ_NO := IOP_ACC_SEQ_NO;
/* Legacy output:
DBMS_OUTPUT.PUT_LINE('OP_ERROR = ' || OP_ERROR);
:OP_ERROR := OP_ERROR;
END;Something like this:
Assuming you have a procedure like this:
CREATE OR REPLACE PROCEDURE abc (p_emp emp%ROWTYPE)
IS
BEGIN
DBMS_OUTPUT.put_line (p_emp.empno);
END;
Then you have to call it from a PL/SQL Block in this way i.e.:
DECLARE
v_emp emp%ROWTYPE;
BEGIN
SELECT *
INTO v_emp
FROM emp
WHERE ROWNUM<=1;
abc(v_emp);
END;
Regards.
Al -
Pass parameter to pl/sql block
Hi,
I am getting following error when trying to create staging table from shell script by passing parameter.
SQL*Loader-941: Error during describe of table T1_1DAY_STG
ORA-04043: object T1_1DAY_STG does not existThis is PL/SQL block being called inside shell script
begin
execute immediate 'create table t1_&1._stg as select * from t1_rpt_tmt';
end Shell Script Call
load_data_to_oracle()
for i in 1DAY 7DAY 15DAY
do
${ORACLE_HOME}/bin/sqlplus ${ORACLE_USER}/${ORACLE_PASSWD}@${ORACLE_SID} << EOF > ${TMP_LOG_FILE} 2>&1
set serveroutput on
@${CREATE_STAGE_SQL} "$i"
COMMIT;
QUIT;
EOF
########Main#######
load_data_to_oracleThanks
SandyIt is probably a permission issue. Are you the owner of the table you are trying to select from in your PL/SQL block? if not, do you have select permission granted specifically?
Here is my test:
test > create table T_ABC (a number, b number);
Table created.
test > @t_abc Hello
test > begin
2
3 execute immediate 'create table t1_&1._stg as select * from t_abc';
4
5 end;
6 /
old 3: execute immediate 'create table t1_&1._stg as select * from t_abc';
new 3: execute immediate 'create table t1_Hello_stg as select * from t_abc';
PL/SQL procedure successfully completed.
test > desc t1_Hello_stg
Name
A
B
test > desc T_ABC
Name
A
B
test > -
How to pass parameter to pl/sql block
Hi,
I am getting following error when trying to create staging table from shell script by passing parameter.
SQL*Loader-941: Error during describe of table T1_1DAY_STG
ORA-04043: object T1_1DAY_STG does not existThis is PL/SQL block being called inside shell script
begin
execute immediate 'create table t1_&1._stg as select * from t1_rpt_tmt';
endShell Script Call
load_data_to_oracle()
for i in 1DAY 7DAY 15DAY
do
${ORACLE_HOME}/bin/sqlplus ${ORACLE_USER}/${ORACLE_PASSWD}@${ORACLE_SID} << EOF > ${TMP_LOG_FILE} 2>&1
set serveroutput on
@${CREATE_STAGE_SQL} "$i"
COMMIT;
QUIT;
EOF
########Main#######
load_data_to_oraclethanks
sandyi dont understand why you want run it from shell script. you can write procedure like this :
SQL>
SQL> CREATE OR REPLACE PROCEDURE mytestProc(p_in VARCHAR2) AS
2 begin
3 FOR i IN (select REGEXP_SUBSTR(p_in,'[^,]+',1,ROWNUM) tblName
4 from dual
5 CONNECT BY INSTR(p_in, ',', 1, level - 1) > 0)
6 LOOP
7 execute immediate 'create table t1_'||i.tblname||'_stg as select * from myt2';
8 END LOOP;
9 end;
10 /
Procedure createdand run it
SQL> exec mytestProc('1day,7day,15day');
PL/SQL procedure successfully completed
SQL> select * from t1_15day_stg
2 union all
3 select * from t1_1day_stg
4 union all
5 select * from t1_7day_stg;
T N
SQL>
SQL> drop table t1_15day_stg;
Table dropped
SQL> drop table t1_1day_stg;
Table dropped
SQL> drop table t1_7day_stg;
Table dropped
SQL> purge table t1_15day_stg;
Done
SQL> purge table t1_1day_stg;
Done
SQL> purge table t1_7day_stg;
Done
SQL> -
Parameter value in sql statement (Custom Folder)
Hi ,
I want to formulate a custom folder - consisting of a sql statement , inside of which there is a parameter. Then in Desktop , the users can select a number as the searching criteria and this value will replace the parameter in sql statement , as in the following:
select CODE_FARMAKOU,EMP_NAME,PACKTYPE,PACKSIZE , SUM_POSOTITA from
select CODE_FARMAKOU,EMP_NAME,PACKTYPE,PACKSIZE , SUM_POSOTITA , row_number() over (order by sum_posotita desc) rw from
(SELECT CODE_FARMAKOU,EMP_NAME,PACKTYPE,PACKSIZE, TO_DATE(DATES_EKTELESIS,'DD/MM/RRRR') DATES ,SUM(POSOTITA) SUM_POSOTITA
FROM EKTELESI_AT_SINT_CLINIC A, MITROO_FARMAKOU B
WHERE CODE_FARMAKOU = FARMAK_CODE
GROUP BY CODE_FARMAKOU,EMP_NAME,PACKTYPE,PACKSIZE, DATES_EKTELESIS))
where rw<=&p
order by SUM_POSOTITA desc The problem is that the use of parameter , whereas in sql*plus is valid, in Discoverer is not....
What can i do in this situation...????
Thanks , a lot
SimonHowever , a peculiar event happens....
whereas the sql statement is:
select CODE_FARMAKOU,EMP_NAME,PACKTYPE,PACKSIZE , SUM_POSOTITA,RW from
select CODE_FARMAKOU,EMP_NAME,PACKTYPE,PACKSIZE , SUM_POSOTITA , row_number() over (order by sum_posotita desc) rw from
(SELECT CODE_FARMAKOU,EMP_NAME,PACKTYPE,PACKSIZE, TO_DATE(DATES_EKTELESIS,'DD/MM/RRRR') DATES ,SUM(POSOTITA) SUM_POSOTITA
FROM EKTELESI_AT_SINT_CLINIC A, MITROO_FARMAKOU B
WHERE CODE_FARMAKOU = FARMAK_CODE
GROUP BY CODE_FARMAKOU,EMP_NAME,PACKTYPE,PACKSIZE, DATES_EKTELESIS
UNION ALL
SELECT CODE_FARMAKOU,EMP_NAME,PACKTYPE,PACKSIZE, TO_DATE(DATES_EKTELESIS,'DD/MM/RRRR') DATES,SUM(POSOTITA) SUM_POSOTITA
FROM EKTELESI_AT_SINT_EX_IATR A, MITROO_FARMAKOU B
WHERE CODE_FARMAKOU = FARMAK_CODE
GROUP BY CODE_FARMAKOU,EMP_NAME,PACKTYPE,PACKSIZE, DATES_EKTELESIS
UNION ALL
SELECT CODE_FARMAKOU,EMP_NAME,PACKTYPE,PACKSIZE, TO_DATE(DATES_EKTELESIS,'DD/MM/RRRR') DATES,SUM(POSOTITA) SUM_POSOTITA
FROM EKTELESI_AT_SINT_FOREON_MS A, MITROO_FARMAKOU B
WHERE CODE_FARMAKOU = FARMAK_CODE
GROUP BY CODE_FARMAKOU,EMP_NAME,PACKTYPE,PACKSIZE, DATES_EKTELESIS
UNION ALL
SELECT CODE_FARMAKOU,EMP_NAME,PACKTYPE,PACKSIZE, TO_DATE(DATES_EKTELESIS,'DD/MM/RRRR') DATES,SUM(POSOTITA) SUM_POSOTITA
FROM EKTELESI_GEN_SINT_KLIN A, MITROO_FARMAKOU B
WHERE CODE_FARMAKOU = FARMAK_CODE
GROUP BY CODE_FARMAKOU,EMP_NAME,PACKTYPE,PACKSIZE, DATES_EKTELESIS
UNION ALL
SELECT CODE_FARMAKOU,EMP_NAME,PACKTYPE,PACKSIZE, TO_DATE(DATES_EKTELESIS,'DD/MM/RRRR') DATES,SUM(POSOTITA) SUM_POSOTITA
FROM EKTELESI_GEN_SINT_EX_IATR A, MITROO_FARMAKOU B
WHERE CODE_FARMAKOU = FARMAK_CODE
GROUP BY CODE_FARMAKOU,EMP_NAME,PACKTYPE,PACKSIZE, DATES_EKTELESIS))
order by RW ascand produces the results....
CODE_FARMAKOU EMP_NAME PACKTYPE PACKSIZE SUM_POSOTITA RW
1000003279 MOXACEF BT 40(BLIST10X4) 45 1
0000014071 DOPAMINE HYDROCHLORIDE VIAL 5 ML X 25 30 2
1000016655 KABIVEN BT 50ÖÕÓ.×1,7ML 21 3
1000014127 DEPON VIT. C BT 2TUBX10 6 4
0000002419 FACTREL INJECTION VIAL 2 ML 5 5
0000086289 DETUSSIN EXPECTORANT BOT 120 ML 3 6
1000016655 KABIVEN BT 50ÖÕÓ.×1,7ML 2 7
1000014127 DEPON VIT. C BT 2TUBX10 2 8
1000000760 DEPON BT 20(BLIST2X10) 2 9
1000003279 MOXACEF BT 40(BLIST10X4) 1 10
1000003279 MOXACEF BT 40(BLIST10X4) 1 11
1000000760 DEPON BT 20(BLIST2X10) 1 12
12 rows selectedIn Discoverer , even i select to see -as parameter- let's say the 10 first records, the system displays the 7 first records , whereas when i want to see the 1,2,3,4,5,6,7 first records the system works fine....and displays accordingly 1,2,3,4,5,6,7 first records. The problem occurs above the 8th record-as parameter selected..!!!!!
I defined the parameter as :Rw<=:Rw
What may be the problem...????
SORRY!!!!! I FOUND THE PROBLEM ....!!!!
Regards and many thanks,
Simon
Message was edited by:
sgalaxy -
Pls. help me - passed parameter
I have a procedure "PROC_XXX" that it has one cursor inside. "CUR_XXX"
I would like to pass parameter that have statement from my trigger etc. "When-button-pressed" to my cursor "CUR_XXX" in procedure "PROC_XXX".
< v_stmt := 'and v_empno = ...........' >.
How can i pass ' v_stmt ' to "PROC_XXX " in my DB.
Thank you very much
v_stmt is depend on events
< v_stmt := 'and v_empno between ...........' >.
< v_stmt := 'or v_empno =< ...........' >.Do you already made the procedure? Looks like you could use dynamic sql in the procedure. check out the oracle pl/sql documentation.
Maybe you are looking for
-
Exporting Pages Documents into Mail?
How can I export Pages Documents into Mail without loosing hyperlinks, links, e-mail links for Windows Users or people that do not have Pages. Exported files into PDF format don´t link anywhere!
-
I reset my 4S now my texts come in as numbers instead of contacts
I reset my 4S now my texts come in as numbers instead of contacts
-
Dragging tabs from tab bar issue in Safari 4.0.3- PLEASE HELP!
Whenever I drag a tab out of the tab bar to make it open in a new window, it shows the window thumbnail and will not open in a new window (hangs up). Yes, I am letting go of the trackpad and it still does not work. I have tried removing the Safari pl
-
Access Connections 5.20 -- Can't Specify Preferred Access Points in Location Profile
Aside from the crappy new harder-to-read graphic display of the network neighborhood -- reminiscent of Microsoft changing things to make them "cuter" while often less functional... I have a real problem. I am running an 802.11g wireless home networ
-
nnone of my apps will connect to my data, except passbook, and they don't come up on it either