PASSING PARAMETRE FROM REPORT TO METHOD

Hi frnds ,
I want to pass 2 things from my report to the bus obj .
1 is the key field which i a using but i dont know how to pass another parametre as date to the business object .
Plz Help
Thansl

HI FRNDS,
Actualy i want the selection screen date which the user is gng to entre and i am already using a fm to trigger the event like this
CALL FUNCTION 'SWE_EVENT_CREATE'
    EXPORTING
      OBJTYPE           = 'BUS2000113'
      OBJKEY            = P_G_OBJKEY
      EVENT             = P_0550
    IMPORTING
      EVENT_ID          = G_EVENT_ID
    EXCEPTIONS
      OBJTYPE_NOT_FOUND = 1
      OTHERS            = 2.
Edited by: ROHIT GUPTA on Mar 14, 2008 4:08 PM

Similar Messages

How can I pass parameter from report to form?

Hi :)
Now I try to build conference room like this by using form
and report. And i design that when users click at group report
then i'll show page that contain questions report and add
question form. And question form and report must receive the
same parameter from group report.
First Problem: is I don't know how group report send the
same parameter to question report and add question report at the
same time. And is it possible??? If not please suggest me what
should I do???
Second Problem: is I don't know how can I pass parameter from
report to form. I don't know the way to do it.
Please tell me!!! Please...
I look forward to hearing from all of you.
Thank You.

One way is to create a link based on that form and attach that
link with the report. Through links you can pass parameters

Passing parameters from REPORTS to FORMS.

Hi,
Could anyone help my on this, I'm trying to pass parameters from reports to forms is it possible? could anyone give me an idea how do I have to proceed.
thank youk,
bino

http://technet.oracle.com:89/ubb/Forum4/HTML/009647.html

Passing file from report to workflow container

My requirement is a report will will upload a file from the desk top.
After uploading the file a workflow should trigger from the program
for which i am using the FM "SWE_EVENT_CREATE".
Apart from uploading the file, the report will fetch some data from
tables and i am passing the data to workflow using the above FM. Now
how can i pass the file to this FM, so that the file is available in
the workflow container.

You have to follow the below sequence of steps.
1)You are uploading the data from your desktop and the data will be in an internal table. Collect the entire data which you want to pass to the Workflow in a single internal table.
2)Export this internal table to memory using Export statement. See syntax to use this statement for exporting internal table data.
for example :
EXPORT : T_PO_STATUS FROM T_PO_STATUS TO MEMORY ID 'PR_PO_STATUS'.
3)Now when You trigger your workflow using the said FM, in the code of a Method associated to a particular Task, you have to import the internal table data using IMPORT statement.
for example :
IMPORT : T_PO_STATUS TO T_PO_STATUS FROM MEMORY ID 'PR_PO_STATUS'.
4) after importing you have to pass this data to the internal table which is declared in the workflow container. for this use the below statement.
SWC_SET_TABLE CONTAINER 'POStatus' T_PO_STATUS.
5) The internal table structures must be same both in the report program and in the workflow container. This way you can get the required data from report program to the workflow container.

Pass parameter from report to report generates error

I am new to Portal. Please help me with this one.
I created two reports using report wizard. Report A lists termination infor group by leaving reasons. Report A takes two parameters: p_termination_date_from, p_termination_date_to.
When Report A is returned, user is supposed to be able to click on termination reason and go to report B, which has more detail of who is terminated under that reason. Report B takes three parameters:
p_Leaving_reason,
p_termination_date_from,
p_termination_date_to.
All these three are passed from Report A.
I use link to pass p_leaving_reason, but not able to use link to pass termination dates. So I use "a href= ..." to pass termination dates in Report A. The report is created without error. But when I run it, it gives me the following error:
Error: Unable to perform query (WWV-10202)
ORA-01858: a non-numeric character was found where a numeric was expected (WWV-11230)
Here is my Report A Statement:
===========================================
select a.LEAVING_REASON, a.meaning, count(distinct(a.EMPLOYEE_NUMBER)) people
from tableA a
WHERE
a.ACTUAL_TERMINATION_DATE >= ''||:P_TERMINATION_DATE_FROM||''
AND
a.ACTUAL_TERMINATION_DATE <= '<a
href="report_b?p_arg_names=P_TERMINATION_DATE_TO&p_arg_values='||:P_TERMINATION_DATE_TO||'">'||:P_TERMINATION_DATE_TO||'</a>'
GROUP BY a.LEAVING_REASON, a.MEANING;
And Report B select statement:
================================
Select * from tableB b
where b.termination_date>=:p_termination_date_from
and
b.termination_date<=:p_termination_date_to;
I appreciate your help.

Update:
Now I put a to_char in front of a.actual_termination_date, it does not give me that error any more. But it doesn't return any row.
Looks like it ignores the value I put in the parameter form. Please help. thank you.
Here is the updated statement for report A:
==============================================
select a.LEAVING_REASON, a.meaning, count(distinct(a.EMPLOYEE_NUMBER)) people
from tableA a
WHERE
to_char(a.ACTUAL_TERMINATION_DATE, 'dd-mon-yyyy') >= ''||:P_TERMINATION_DATE_FROM||''
AND
to_char(a.ACTUAL_TERMINATION_DATE, 'dd-mon-yyyy') <= '<a
href="report_b?p_arg_names=P_TERMINATION_DATE_TO&p_arg_values='||:P_TERMINATION_DATE_TO||'">'||:P_TERMINATION_DATE_TO||'</a>'
GROUP BY a.LEAVING_REASON, a.MEANING;

Problem while passing parameter from report to report.

Hi
I'm using forms and reports 10g, hava a problem while passing the parameter from reports to report.
i'm using srw.set_hyperlink to call report from report.
i have created a key value in the cgicmd.dat file called
faccre802005-2006: report=faccre80 destype=cache desformat=pdf userid=<userid/passwd@cs> server=<servername>
Now in the format trigger i'm using this key value
function BTN_DEBITFormatTrigger return boolean is
temp varchar2(5000);
IP_ADDRESS VARCHAR2(50);
SERVER_NAME VARCHAR2(10);
L_ACCT_CODE VARCHAR2(14);
begin
SELECT MAST_INT_DESC,MAST_USER_PGM_ID INTO IP_ADDRESS,SERVER_NAME FROM MAST_INT_INFO WHERE MAST_INT_ID='VISHWA';
temp := IP_ADDRESS||'?faccre80'||:P_FIN_YEAR||'+server='||server_name;
temp :=temp ||'+'||'P_PREVIOUS_CODE='''||:ACCT_CODE||''''||'+'||'P_COMPANY_CODE='''||:P_COMPANY_CODE||'''';
temp :=temp ||'+'|| 'P_FROM_DATE='''||TO_CHAR(:P_FROM_DATE,'DD-MON-RRRR')||''''||'+'|| 'P_TO_DATE='''||TO_CHAR(:P_TO_DATE,'DD-MON-RRRR')||''''||'+'||'P_TRUST_CODE='''|| :P_TRUST_CODE||'''';
temp :=temp ||'+'|| 'P_UNIT_CODE='''||:P_UNIT_CODE||''''||'+'||' P_FIN_YEAR='''||:P_FIN_YEAR||'''';
temp :=temp ||'+'|| 'P_LEVEL='''||:P_LEVEL||''''||'+'||'P_HEADER='''||replace(:P_HEADER,' ','%20')||''''||'+'||'P_FORMAT='''||:P_FORMAT||'''';
SRW.Set_Hyperlink(temp);
END;
return (TRUE);
end;
Report is coming but not the expected result because parmaeters are not coming from first report to second report.
If i dont use cgicmd file userid and password are displyed in the URL.
Pl tell me how to pass parameter from one report to another.
thanks and regards

Hi
I got the solution.
I forgot to add %* at end of the KEY value.

Hw to pass parameter from report to forms

Dear Friends,
I m working on Forms n Reports 6i,
I m running report n passing parameter from the forms now the requirement is that if report run successfully it shuld give the msg otherwise give an user define error msg.
Hw do i pass any parameter from report to form for acknowledgment.
Thanking yours
Chandan

Hi Rajat,
using run_product built in i can pass parameter from forms to reports but hw can i get some parameter value from reports to forms as mentioned earlier my post
Thanking Yours,
Chandan

How can I pass parameters from report to HTML page

Hi,
Does any one know how to pass value from Portal Report to other HTML page (asp for excample).
I build a Protal report, and I want jamp to "http://...viewDoc.asp?DocID=DocumentID" URL, by clicking on link, where "DocumentID" is parameter that to be pass from report.

One way is to create a link based on that form and attach that
link with the report. Through links you can pass parameters

How to pass value from report to form?

Dear,
I built a report and I create button on report too. This
button will show a form that I want it to automatically show
receivable values from report so that user don't complete them.
So I create a button on the report . I enter Javascript in
PL/SQL Code tab in '...after displaying the footer' as follow :
htp.formOpen
(owa_util.get_owa_service_path||'portal30.wwa_app_module.link?
p_arg_names=_moduleid&p_arg_values=1736929105&p_arg_names=_show_h
eader&p_arg_values=YES&p_arg_names=GNO&p_arg_values=1&p_arg_names
=QNO&p_arg_values=2');
htp.formSubmit(null,'New Answer');
htp.formClose;
GNO , QNO is value which I want to pass
As you can see, the above code can pass only static value.
But I want to pass values that is the condition of this report.
I mean,such as, this report show data that gno=1 and qno=2 and I
want to pass these values to form. So both value will appear in
gno and qno field.
So please tell me what should I do. Please help me. I don't
know how to do it. I look forward to hearing from all of you.
Please!!!!!! Don't hesitate to answer.
Thank you very much
Sirin Kittichotpanich

Hi Marc,
Yes, you have it correct in what I am trying to do and if I put a default value in the hidden item on page 2 and run it then that works fine. I just can't get the value from the form passed to page 2 for some reason. There are actually 22 items on the form that can be filtered but just using COREID for simplicity. When I run the form I am just entering a value in the COREID field to try and return those records. Most of the other items on the form are displayed as Popup LOV(fetches first row). Would the values of all these be done the same in a comma delimited list for the items and values? I was trying to get at least one of them working first. Here is the search result that comes up in the debug window:
Search Results
0.01: Item: P2_COREID HIDDEN
0.01: show report
0.02: determine column headings
0.02: parse query as: MOTEAMSAPEX
0.02: binding: ":P2_COREID"="P2_COREID" value=""
0.02: print column headings
0.02: rows loop: 15 row(s)
No data found.
Here is the SQL statement:
select coreid, serialnumber
from MOTEAMS.V_ASSETS where
instr(UPPER("COREID"), UPPER(:P2_COREID)) > 0
The branch settings are:
Set these items: P2_COREID
With these values: &P1_COREID (also tried this with period at the end)
I am new to this and not familiar with apex.oracle.com. How would I go about posting to that site?
Thanks,
Pam

How to pass parameters from report to graph

I am trying to call an existing chart from Reports60.
I figured out that only CHAR and NUMBER parameters can be passed. The mychart.ogr executable works fine from command line with parameters passing.
Now I'm trying to pass parameter to Graphic Display, for that I associated Report Column/Parameter with Chart Parameter. (set parameter/column property).
It's not working.. I'm getting Graph for the initial values parameters which are in the chart. Seems like there are no parameter value passing from reports to graph.
Are there any tricks to pass value for the CHAR parameter?
Thanks in advance for the help,
Helen

Nobody help me?

Passing parameter from reports to form - Urgent

Hi ,
I am calling a report (2.5) from a form using RUN_PRODUCT. I would like to know if there is any way to do the following.
(a) Return a value from reports to calling form. For ex. I would like to know the last Item name (assuming the reports prints all items in inventory) printed. I am sending a from and to numbers of item id's (range) and I need to know the last item printed.
(b). Check the success of report. For example, while printing the 5 items (the range that I passed) if there is any error in printing , this should be tracked either in the form or report. If this is not possible using run_product , If I need to use srw package, how to use it. Can I call the report as usual with run_product and in the after parameter trigger can, I call the report again and track error.
Any help will be appreciated.
Thanks

You have to explain what you want.
Why would you want to start the Forms Builder (Design time tool) from a JSP page? It's about the same as starting JDeveloper or Eclipse from a JSP page.

Passing data from report to abap webdynpro

Hello,
I'm calling an abap webdynpro from an abap report through CALL_BROWSER MF.
I need to pass data from a report to a webdynpro. It is a table that I want to pass. I've tried to user memory ids, but as I was suspecting, it doesn't work.
Is there a way of doing it?
Thanks and best regards,
Vasco Brandã

Hi,
Please read this thread : Is it possible to pass a table as input parameter to a web dynpro app?
Regards,
Pierre

Passing array from JS to method of applet

There is unable in IE pass array of values from javascript to method of applet, but in Mozilla it's working fine. In IE i have got exception:
Exception:
java.lang.Exception: setTest{0} :no such method exists
     at sun.plugin.com.JavaClass.getMethod1(Unknown Source)
     at sun.plugin.com.JavaClass.getDispatcher(Unknown Source)
     at sun.plugin.com.DispatchImpl.invokeImpl(Unknown Source)
     at sun.plugin.com.DispatchImpl$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.plugin.com.DispatchImpl.invoke(Unknown Source)
java.lang.Exception: java.lang.Exception: setTest{0} :no such method exists
     at sun.plugin.com.DispatchImpl.invokeImpl(Unknown Source)
     at sun.plugin.com.DispatchImpl$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.plugin.com.DispatchImpl.invoke(Unknown Source)
JavaScript code:
var testArr=[];
    testArr[0]=1;
    testArr[1]=2;
    testArr[2]=3;
    document.sync.setTest(testArr);
Applet method:
public void setTest(Object[] test){
        System.out.println("Test "+test.length);
        for (Object o: test){
            System.out.println(o.toString());
    }How do passing in IE?

yes, MAYSCRIPT just allow to call methods. but as i know it's unable to pass simply array from js to applet and from applet to js. so i convert array of values to String and in applet i use StringTokenizer to parsing. Thanks. ;)

Passing flexfield from report wrapper to seeded report using shell script

I am unable to pass flexfield values from report wrapper to seeded report using shell script
below is the shell script that i am using to transfer GL Account High and GL Account Low to the seeded program Receipt Journal Report (ARXRJR). the flex fields get passed through the parameter v_param_12 and v_param_13. but all i am getting in the seeded report log file is the reporting level,reporting context,set_of_books,period, gl_date_low/high .
#TEST Program for Passing GL Account High and GL Account Low
v_user_name=`echo $3`
v_login_pwd=`echo $FCP_LOGIN`
v_prog_name=`echo TESTARXRJR`
echo 'v_prog_name: '$v_prog_name
# testing for passing the arguments from CM ...
if [ -z "$1" ]
then
echo "Please pass the first argument...."
exit 1
fi
v_request_id=`echo $4`
echo 'v_request_id: '$v_request_id
v_param_1=`echo $5`
echo 'v_param_1: '$v_param_1
v_param_2=`echo $6`
echo 'v_param_2: '$v_param_2
v_param_3=`echo $7`
echo 'v_param_3: '$v_param_3
v_param_4=`echo $8`
echo 'v_param_4: '$v_param_4
v_param_5="$9"
echo 'v_param_5: '$v_param_5
shift
v_param_6=`echo $9`
echo 'v_param_6: '$v_param_6
shift
v_param_7=`echo $9'`
echo 'v_param_7: '$v_param_7
shift
v_param_8=`echo "$9"`
echo 'v_param_8: '$v_param_8
shift
v_param_9=`echo $9`
echo 'v_param_9: '$v_param_9
shift
v_param_10=`echo $9`
echo 'v_param_10: '$v_param_10
shift
v_param_11=`echo $9`
echo 'v_param_11: '$v_param_11
shift
v_param_12=`echo $9`
echo 'v_param_12: '$v_param_12
shift
v_param_13=`echo $9`
echo 'v_param_13: '$v_param_13
shift
v_param_14=`echo $9`
echo 'v_param_14: '$v_param_14
shift
v_param_15=`echo $9`
echo 'v_param_15: '$v_param_15
shift
v_param_16=`echo $9`
echo 'v_param_16: '$v_param_16
shift
v_param_17=`echo $9`
echo 'v_param_17: '$v_param_17
shift
v_param_18=`echo $9`
echo 'v_param_18: '$v_param_18
shift
v_param_19=`echo $9`
echo 'v_param_19: '$v_param_19
shift
v_param_20=`echo $9`
echo 'v_param_20: '$v_param_20
shift
v_param_21=`echo $9`
echo 'v_param_21: '$v_param_21
shift
v_param_22=`echo $9`
echo 'v_param_22: '$v_param_22
shift
v_param_23=`echo $9`
echo 'v_param_23: '$v_param_23
echo "Executiong SQL to obtain org id and responsibility name"
(sqlplus -s /nolog <<end_of_sql
conn $v_login_pwd
set heading off
set echo off
set feedback off
SELECT 'ORGID:'||b.profile_option_value || ':' ||e.responsibility_name
FROM fnd_profile_options a,
fnd_profile_option_values b,
fnd_concurrent_requests c,
fnd_responsibility d,
fnd_responsibility_tl e
WHERE c.request_id = $v_request_id
AND c.responsibility_id = b.level_value
AND b.profile_option_id = a.profile_option_id
AND a.application_id = b.application_id
AND c.responsibility_application_id = d.application_id
AND d.application_id = e.application_id
AND a.profile_option_name = 'ORG_ID'
AND c.responsibility_id = d.responsibility_id
AND d.responsibility_id = e.responsibility_id;
exit
end_of_sql
) > a.log
v_var=`grep -iv "ORG_ID" a.log|sed 's/Connected.//'`
echo 'v_var: ' $v_var
v_org=`echo $v_var| awk 'FS=":" {print $2 }'`
v_resp_name=`echo $v_var | awk 'FS=":" {print $3}'`
echo 'v_org :'$v_org
echo 'v_resp_name :'$v_resp_name
echo 'Sumitting Receipt Journal Report...'
user_request=`CONCSUB $v_login_pwd GL "$v_resp_name" $v_user_name WAIT=Y CONCURRENT AR ARXRJR \
          \"$v_param_3\"\
          \"$v_param_4\"\
          \"$v_param_5\"\
          \"$v_param_6\"\
          \"$v_param_7\"\
          \"$v_param_8\"\
          \"$v_param_9\"\
          \"$v_param_10\"\
          \"$v_param_11\"\
          \"$v_param_12\"\
          \"$v_param_13\"\
          \"$v_param_14\"\
          \"$v_param_15\"\
          \"$v_param_16\"\
          \"$v_param_17\"\
          \"$v_param_18\"\
          \"$v_param_19\"\
          \"$v_param_20\"\
          \"$v_param_21\"\
          \"$v_param_22\"\
          \"$v_param_23\"`
user_request=`echo $user_request|awk '{print $3}'`
echo Request is $user_request
trx_rep_file="$user_request"
echo 'trx_rep_file: '$trx_rep_file
sleep 10
for i in 1 2 3 4 5
do
if test -f $APPLCSF/$APPLLOG/l$user_request.req
then
if test [`grep -i '"Concurrent process completed successfully"' $APPLCSF/$APPLLOG/l$user_request.req`]
then
if test -f $APPLCSF/$APPLOUT/o$trx_rep_file.out
then
echo +++++++++++++++++++++++++++++++++
               echo 'output file found'
               echo ++++++++++++++++++++++++++++++++++++++
else
echo +++++++++++++++++++++++++++++++++++++++++
          echo failure in Report listing production
          echo +++++++++++++++++++++++++++++++++++++++
fi
break
else
echo +++++++++++++++++++++++++++++++++++++++
echo Job not Over Yet
     echo +++++++++++++++++++++++++++++++++++++++++++++
fi
echo +++++++++++++++++++++++++++++++++++++++
echo File not found yet
echo ++++++++++++++++++++++++++++++++++++++
fi
sleep 10
done
echo ----------------------------------------------------------
echo Transaction Listing process over
echo ---------------------------------------------------------
echo ----------------------------------------------------------
echo Executing SQL to derive Search Pattern
echo ----------------------------------------------------------
v_pattern=`sqlplus -s /nolog <<EOF1
conn $v_login_pwd
     set heading off
     set echo off
     set feedback off
     SELECT 'SEARCH^'||meaning||'^'||attribute1||'^'||attribute2||'^'||attribute3
     FROM fnd_lookup_values
     WHERE lookup_type = '$v_param_2'
     AND lookup_code = '$v_prog_name';
exit
     EOF1`
echo 'v_pattern: '$v_pattern
v_pattern_n1=`echo $v_pattern|sed 's/Connected.//'|awk 'FS="^" {print $2}'`
echo 'v_pattern_n1: '$v_pattern_n1
v_pattern_n2=`echo $v_pattern|sed 's/Connected.//'|awk 'FS="^" {print $3}'`
echo 'v_pattern_n2: '$v_pattern_n2
v_pattern_n3=`echo $v_pattern|sed 's/Connected.//'|awk 'FS="^" {print $4}'`
echo 'v_pattern_n3: '$v_pattern_n3
v_pattern_n4=`echo $v_pattern|sed 's/Connected.//'|awk 'FS="^" {print $4}'|sed 's/ //'`
echo 'v_pattern_n4: '$v_pattern_n4
echo 'v_param_12: '$v_param_12
echo 'v_param_13: '$v_param_13
echo -----------------------------------
echo Deriving final output
echo ----------------------------------
v_var=`cat $APPLCSF/$APPLOUT/o$trx_rep_file.out | grep -i "$v_pattern_n1"|\
               sed "s/(/-/g"|sed "s/)/ /g"|\
               sed "s/$v_pattern_n1/$v_pattern_n2/g"|\
          sed 's/ /~/g'|\
sed 's/~~*/~/g'|\
               sed 's/ *//g'|\
               sed 's/,//g'`
echo 'v_var: '$v_var
v_var_2=`cat $APPLCSF/$APPLOUT/o$trx_rep_file.out|grep -i "$v_pattern_n3"|\
               uniq`
v_out_1=`echo "$v_var"|grep -i "$v_pattern_n2"|awk 'FS="~" {print $3}'`
echo 'v_out_1: '$v_out_1
echo 'v_var_2: '$v_var_2
echo ------------------------------------------------------------
v_out_2=`echo "$v_var_2"|grep -i "$v_pattern_n3"|awk 'FS=":" {print $2}'`
echo 'v_out_2: '$v_out_2
echo ----------------------------------------------
echo Process comleted
echo ----------------------------------------------------
echo ================================================================================
#---------------------------------------------------------------------------------------------------

The name of this OTN group is "Database - General"
Your question relates to an unnamed application that might be E-Business Suite, or PeopleSoft, or Siebel, who can say.
Please re-ask your question in the appropriate applications forum and be sure to clearly name the full product name and version. We are not mind readers and we can not look over your shoulder.

Passing parameters from report to form

Hello,
I have a report based on a View with all the details of only one record. I whant to link this report with a form in insert mode, passing some of the fields as parameters.
Anyone konws how to do it?

Jan,
Thanks for the succinct reply! I've been trying to 2 days to solve this problem. Whew!
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Jan Willem Vermeer ([email protected]):
Unfortunately linking reports and forms in insert mode is not completely tackled in the faq.
For a long time Oracle Customer Support and I were not able to get the form in insert-mode. My forms kept on appearing in query-mode, so when I passed values from the report to the form, the form queried records based on the parameters passed through from the report. While I wanted these parameters filled in as default values.
The solution is almost too easy to imagine. When you define the link-parameters in the report definition, you should leave the EQUAL-sign blank. On metalink you can read TAR 1258704.996 and bug 1696340 for more info.<HR></BLOCKQUOTE>
null

PASSING PARAMETRE FROM REPORT TO METHOD

Similar Messages

Maybe you are looking for