Pata_via: profe of ... failed error -16 and also ata: conflict

hello!
just installed archlinux on my laptop and I love it, better package manager than gentoo's, its much faster.
anyways I noticed that I cant turn on dma for /dev/hda it says Operation not permitted... so I tryed the newest kernel, 2.6.21.1 and saw in dmesg the following
ata: 0x1F0 IDE port busy
ata: conflict with ide0
ata: 0x120 IDE port busy
ata: conflict with ide1
pata_via: probe of 0000:0:11.1 failed with error -16
I noticed that I cant choose the old ide chipset driver, VIA82CXXX, but instead have to choose the VIA PATA one, which seems to have this problem.
the ARCH linux kernel bundled with the disto works better but it seems to be using scsi-emulation because I dont have any /dev/hda but /dev/sda then, and also I want to compile my own kernel.
help?

So, I solved it by copying over my .config from my stationary and changing a few things then recompiling the .21.1 kernel... I should not have used the new experimental ata driver (pata_via) but the old one instead, and it works fine now.

Similar Messages

I updated iTunes 10.3.1 today, and now it won't let me open itunes it keeps saying error 7 (windows error 14001) and also says (apple mobile failed to start verify significant privileges to start system services)

I updated iTunes 10.3.1 today, and now it won't let me openitunes it keeps saying error 7 (windows error 14001) and also says (apple mobile failed to startverify significant privileges to start system services) I have unstalled it severaltimes, tried repairing it also switched off all security software and checkedall files are deleted in local disk (program file) but still no look. Please cansomeone help

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
Regarding AMDS failures there is a hint in another thread that disabling the Windows Firewall before attempting to reinstall may help, otherwise take a look at the steps outlined in this post. Re: Can't install iTunes 12.1 on Windows 7 64-bit. I know they look a little daunting, but the process of generating the logs themselves isn't that hard to do. Extracting useful information from them is still a challenge but maybe something will leap out. If you want to post the log for the failed components for me to have a look at here or in the other thread please edit out any personal information, particularly your email address, first.
tt2

I need help! I cannot access my iTunes from my window's. I keep getting message "error 7" and also MSVCR80.dll missing. I do not know how to access this?

I need help! I cannot access my iTunes from my window's. I keep getting message "error 7" and also MSVCR80.dll missing. I do not know how to access this?
I tried downloading the latest version of iTunes, but it does not sync to my windos 7 HP because of the previous messages. Any feedback would be greatly appreciated.
Thank you,
ElsaV73

Hope this article helps you:
http://support.apple.com/kb/TS5376
Pleas reply with any further questions.

Error 500 and also getting an ISAPI error.

Description of the Problem/Question:
Here is the error message we are seeing in the extended logging on the webserver. We can replicate in our test
environment and this log is from the test region. It throws an error 500, ISAPI error to the user.
Here are the log entries from wlacess.log on cssna105. I tried to search for the root cause without any success.
At some point, some one was saying to set the KeepAlive value to off. It is recommended to set to ON in performance guide.
Ct claims, small size of the messaging is getting through and some with larger size is getting this errors.
wlacess.log:
<79241247502601228> SSL is not being used
Mon Jul 13 12:30:01 2009 <79241247502601228> resolveRequest: wlforward: /
Mon Jul 13 12:30:01 2009 <79241247502601228> URI is /, len=1
Mon Jul 13 12:30:01 2009 <79241247502601228> Request URI = []
Mon Jul 13 12:30:01 2009 <79241247502601228> attempt #0 out of a max of 5
Mon Jul 13 12:30:01 2009 <79241247502601228> Trying a pooled connection for 'XXXXXX/9100/9100'
Mon Jul 13 12:30:01 2009 <79241247502601228> got pooled connection to server 'XXXXXXX/9100/9100' from general list for '/', Local port: 1318
Mon Jul 13 12:30:01 2009 <79241247502601228> WLS info in sendRequest: XXXXXXX:9100 recycled? 1
Mon Jul 13 12:30:01 2009 <79241247502601228> URL::parseHeaders: CompleteStatusLine set to http://HTTP/1.1 200 OK
Mon Jul 13 12:30:01 2009 <79241247502601228> URL::parseHeaders: StatusLine set to 200 OK
Mon Jul 13 12:30:01 2009 <79241247502601228> parsed all headers OK
Mon Jul 13 12:30:01 2009 <79241247502601228> sendResponse() : uref->getStatus() = '200'
Mon Jul 13 12:30:01 2009 <79241247502601228> Going to send headers to the client. Status :200 OK
Mon Jul 13 12:30:01 2009 <79241247502601228> Content Length = 1573
Mon Jul 13 12:30:01 2009 <79241247502601228> canRecycle: conn=1 status=200 isKA=1 clen=1573 isCTE=0
Mon Jul 13 12:30:01 2009 <79241247502601228> closeConn: pooling for 'XXXXXX/9100'
Mon Jul 13 12:30:01 2009 <79241247502601228> request [] processed successfully ..................
Mon Jul 13 12:30:02 2009 <79241247502598226> URL::parseHeaders: CompleteStatusLine set to http://HTTP/1.1 200 OK
Mon Jul 13 12:30:02 2009 <79241247502598226> URL::parseHeaders: StatusLine set to 200 OK
Mon Jul 13 12:30:02 2009 <79241247502598226> parsed all headers OK
Mon Jul 13 12:30:02 2009 <79241247502598226> sendResponse() : uref->getStatus() = '200'
Mon Jul 13 12:30:02 2009 <79241247502598226> Going to send headers to the client. Status :200 OK
Mon Jul 13 12:30:02 2009 <79241247502598226> Content Length Unknown
Mon Jul 13 12:30:02 2009 <79241247502598226> *******Exception type READ_ERROR_FROM_SERVER (socket read failure) raised at line 207 of ..\nsapi\.\Reader.cpp
Mon Jul 13 12:30:02 2009 <79241247502598226> got exception in sendResponse phase: READ_ERROR_FROM_SERVER http://os error=0, line 207 of ..\nsapi\.\Reader.cpp: socket read failure at line 1043
Mon Jul 13 12:30:02 2009 <79241247502598226> NOT failing over after sendResponse() exception: READ_ERROR_FROM_SERVER
Mon Jul 13 12:30:02 2009 <79241247502598226> request [PSIGW/HttpListeningConnector] did NOT process successfully ..................
Mon Jul 13 12:30:03 2009 <79241247502603229>
and
from JAVA STACK TRACE, any thoughts for the cause...
POID:52482812] [UserId:USDW] [Message:Connection to PeopleSoft failed. Response returned: HTTP/1.1 500 Internal Server ErrorConnection: closeDate: Fri, 10 Jul 2009 15:06:54 GMTServer: Microsoft-IIS/6.0X-Powered-By: ASP.NETContent-Type: text/html<TITLE>ISAPI plug-in Error Message</TITLE><H2>Message from the ISAPI plugin:</H2><P><PRE>Internal Server failure, ISAPI plugin. Cannot continue.</PRE><HR><I>Build date/time: Mar 19 2009<I><P><HR><B>Change Number:</B> <I>1203144<BR>] [Cause:null] [Stack Trace]

Sonia Amin wrote:
Hello,
>
> Kindly do the following and see if it works:
>
> 1.Stop Tomcat
> 2. Deleted the content within the localhost of work directory inside tomcat folder. ( ex. folders under \installation drive\Business Objects\Tomcat6\work\Catalina\localhost)
> 3. Restart the tomcat.
> 4. Wait till the localhost folder is repopulated.
>
> Try the link now.
>
> Regards
> Sonia
Hi Sonia,
Just tested the suggested steps, but alas - same error.
Regards,

Backup Failed (error -24988 and -903)

Hello All,
MaxDb 7.6.03.03 on Windows 2003 Server (32 bit).
I've an instance that run fine since several years now, which is backed up using a simple script:
@echo off
echo ============================= >> d:maxdbscripts ackup.log
echo. | date | find "current" >> d:maxdbscripts ackup.log
echo. | time | find "current" >> d:maxdbscripts ackup.log
del f:     orpedo_com
"c:program filessdbprogramspgmdbmcli" -d torpedo -n srv-sgbd2 -u ***,*** -i D:maxdbscripts ackup_torpedo.script
xcopy f:     orpedo_com t: /y >> d:maxdbscripts ackup.log
echo. | time | find "current" >> d:maxdbscripts ackup.log
Here the backup_torpedo.script:
util_connect ****,******
backup_start complet data
util_release
Every thing work fine, until monday: the backup script failed with error code -903 and -24998:
D:maxdbscripts>backup_torpedo.bat
>util_connect ***,*****
OK
>backup_start complet data
ERR
-24988,ERR_SQL: SQL error
-903,Host file I/O error
3,Data backup failed
The database error file say that:
2009-07-29 08:53:55     0x13EC ERR 18008 TASKING Could not create thread: 'ASYNCi', rc = 8
2009-07-29 08:53:55     0x14D4 ERR 52011 SAVE     devspace: surprising blk cnt:
2009-07-29 08:53:56     0x14D4 ERR 52012 SAVE     error occured, basis_err 3700
2009-07-29 08:53:56     0x14D4 ERR     3 Backup   Data backup failed
I've tried to remove and recreate the backup medium, lauch the backup from dbmgui, but i still have the same error.
There is far enougth place on f: disk (83Gb, database size is 40Gb).
I've tried to move the backup medium from f: disk to d: disk, but i still have te same errors.
There is nothing related on event viewer on the server.
The online documentation don't say anything usefull about this 2 errors messages.
No changes have been made on the server nor the database, no update, nothing.
Any idea ?
TIA
Frédéric.

Yeah, problem solved !
I've moved batch scripts from this server to another one, and the backup run fine !
Look's like i ran out of shared memory, file descriptor or something like that.
Maybe this could help someone later...
Frédéric.

TS5376 I have been trying to install Itunes for the past 1.5 days without success. The method outlined here did not work and gave me the same error messages as before Runtime error R6034 and also error 7

I tried the latest Apple fix to resolve the installation issues of iTunes 11.1.4 and had no success at all. This was the fix that asked you to remove .dll files and place them on the desktop before unistalling and reinstalling iTunes. I followed the procedure exactly and obtained the same results as before.
Namely,
Runtime Error: R6034 -An application has made an attempt to load the C runtime library incorrectly
iTunes was not installed correctly. Error 7.
At this point, after spending 1.5 days attempting to install iTunes I am giving up. Hopefully, someone will come up with a fix that really works and I will install it then.

Hi
I had the same problem on my PC's with Win 7 and Win XP.
I solved it this way:
- De-install iTunes, best with a special tool, like, for example "Your Uninstaller" from Ursoft. Any other un-installer will do the job, provided it cleans the registry of traces from iTunes
- De-install "Apple Mobile Device Support". This seems to be the culprit. It is a sub-program of iTunes. But if you just de-install iTunes this sub-program stays in your PC. If you still have it on your PC and you try to update to 11.1.4, it will cause these problems.
- De-install also "Apple Application Support", but I am not sure it is really necessary, but de-installing does no harm, since it will be re-installed automatically.
- De-install also "Apple Software Support", but I am not sure it is really necessary, but de-installing does no harm, since it will be re-installed automatically.
- Re-start your PC
- Download the latest version of iTunes from the Apple webpage and install it.
For me this worked on both of my PC's.
Regards
goletto

How do I fix the "modification failed" error? And Dismiss calander reminders

When moved to new laptop Calendar syncs temporarily then disappears completely. I remove read only tick which appears every time start TB after reloading links to Google calendar.As soon as I do this it disappears.
Also calendar reminders wont dismiss.
Please help

Right click the calendar and select export as ICS.
Then try importing and see if it helps.
Are the "events" showing as your the owner... There were issues at one point where calendar items that were not "owned" by you were not able to be edited.
Help menu )Alt+H) ? troubleshooting information.
Click the show button for the profile.
Close Thunderbird
Open the folder "Calendar data" look at the properties for all the files and make sure they are not read only. Correct as necessary.

TS3276 Message: Error in sieve filter. Since this morning 2013/03/07 I'm receiving this error message and also the mail each time a mail is sent to me. Could someone help me.

Is there a solution on my side or it is mac.com mail server problem?
<Email Edited by Host>

Mail Error: Reason: Error in sieve...: Apple Support Communities
Email. Problem during delivery...: Apple Support Communities

Can only connect to enterprise wifi the first time each day, then does not reconnect and got the "Association Failed" error

To save battery, I leave my wifi off when the TP's screen is locked. At home, my TP has no problem reconnecting to wifi after the screen is unlocked. However, at work, which uses enterprise wifi, I can only connect the first time. If I lock the screen and then unlock it (causing the wifi to turn off and on again) then the TP will not reconnect and I would get the "Association failed" error over and over again. If I were to turn the TP off and on again, I would still get the same error. Here's the strange part, if I come in work the next day, it would be able to connect to the wifi. If I were to leave the wifi on all the time, it would not disconnect even if I lock the screen. Now if I were to turn off the wifi and then turn it on again, the TP would not reconnect. So it seems like the TP can only connect the first time each day....very strange...and frustrating.
Post relates to: HP TouchPad (WiFi)

Scimmia is right. But you AcousticBruce are still very wrong. You claim there were no error messages. Yet after much proding and denial you finally provide small portions of error messages which fully identify the problem and can be found in many other posts in these forums. Yet still, you haven't actually provided full output - instead you paraphrased the output after a couple of "//" symbols.
If you don't give us the actual output we can't help - except in this case the error is so common we could very easily help. So could the wiki page on wpa_supplicant if you had read it, as your problem is explictly listed there in a "NOTE" box. But more importantly if you are reluctant to give us actual output we will not want to help you.
This issue would have been solved instantly if you would have provided the actual output instead of lying about it.
The relevant wiki pages:
https://wiki.archlinux.org/index.php/WP … passphrase
https://wiki.archlinux.org/index.php/He … er_or_root
And the related forums posts found after just a quick search of that error message that you finally provided:
https://bbs.archlinux.org/viewtopic.php?id=167244
https://bbs.archlinux.org/viewtopic.php?id=184824
https://bbs.archlinux.org/viewtopic.php?id=178909
https://bbs.archlinux.org/viewtopic.php?id=190097
https://bbs.archlinux.org/viewtopic.php?id=191351
https://bbs.archlinux.org/viewtopic.php?id=191964
Last edited by Trilby (2015-05-18 11:08:44)

"Connection to server failed" error with Gmail exchange server

Hi,
I upgraded my iPhone 4 to iOS 4.3 on Friday and now I can't access my Gmail account using the Microsoft Exchange settings, I just get a "Connection to server failed" error.
I also have a Google Apps email account for my website and I am able to access it using exchange... it's just my regular Gmail account that I can't access (and that's where all my contacts are stored).
I can access the account using the regular Gmail email settings but that doesn't sync my contacts over the air, which is the advantage of using Exchange that I love the most.
I don't know if it is related or not, but I had a really hard time upgrading to iOS 4.3. I guess the update file was corrupt and it put my phone into restore mode. I had to use a different computer for the upgrade to finally work. Because I was using a different computer I had to restore it as a new phone rather than restoring from a backup, so maybe that has something to do with my email problem.
Message was edited by: KJones75

I seem to have solved the problem. I deleted my Gmail account from the phone and then changed my Gmail password from my computer, and then tried adding the account to my phone again... and surprise, surprise, it worked.
I'm not sure why changing the password fixed the problem, but I'm glad it's working again.

Latest update failed to install and cannot now open iTunes at all.

I tried to install the latest update of iTunes on my laptop but it failed. I got both a 'runtime error' message and also an error message saying 'Apple Mobile Device' failed to start.
I have tried uninstalling and resinstalling an earlier version but nothing is working so I am unable to back up my files and transer things between my iphone and my kids' ipod Touches.
I would really appreciate any ideas of what I can do as I need to get iTunes back on my laptop.
Thank you

Hey gina 2909,
When you uninstalled and reinstalled iTunes, did you use this article?
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
If you haven't already done these steps, this section contains information that might help your situation, as the order and manner which you uninstall has an effect on the outcome:
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
Let us know if following that article and uninstalling those components in that order helped the situation.
Welcome to Apple Support Communities!
Sincerely,
Delgadoh

MSI Fail error when trying to unininstall VMWare Player 7.

I downloaded the trial version of VMWare Workstation 11. When I do the install it tries to uninstall VMWare Player 7. The uninstall fails with the cryptic error message 'MSI Fail.'
I've found various articles about this around the web and even tried a few 'solutions' to no avail. Is there a sure fire way to uninstall the Player so I can try the Workstation?

I already found the link you posted and followed it but the player is still on my system so VMW still wants to uninstall it and I get the msi fail error. I also tried the manual removal and that didn't work. In fact I wound up breaking some non vmware stuff. Thank heaven for disk images.
Also, the article mentions the file VMware_Install_Cleaner.zip but I can't seem to find it. Is this something that might work to clear up the problem? Too bad I can't just reinstall the player but there is no option for that. I tried a repair but that was a no go too. Also tried deleting files from my Temp folder which some folks claim worked for them.
Also ran the MSI fixit program from MS and while it said it fixed some things about the Player I still couldn't install VMW.

Unmount of /home failed error (45)

hi all have any of you had this show up when shutting down "unmount of /home failed error (45)"
it also includes /net i have not had a lot of luck finding any info on this error it shows up when
shutting down after graphics close and the screen is black showing services shutting down
i have my system set up in verbos so i can see start up and shut down messages

hi i only see these errors when shutting down here what terminal looks like from home and byron-duncans-mac-pro:/ Byron$ ls -al
total 41133
drwxrwxr-t@ 33 root admin 1190 Nov 18 12:57 .
drwxrwxr-t@ 33 root admin 1190 Nov 18 12:57 ..
-rw-rw-r--@ 1 Byron admin 12292 Nov 18 14:16 .DS_Store
drwx------ 3 root admin 102 Nov 3 23:47 .Spotlight-V100
d-wx-wx-wt 2 root admin 68 Nov 18 12:42 .Trashes
-rw-r--r-- 1 root admin 0 Nov 3 23:47 .com.apple.timemachine.supported
drwx------ 18 root admin 612 Nov 18 12:56 .fseventsd
-rw------- 1 root wheel 65536 Nov 3 23:47 .hotfiles.btree
drwxr-xr-x 2 root wheel 68 Sep 24 02:08 .vol
drwxrwxr-x@ 57 root admin 1938 Nov 17 18:46 Applications
-rw-r--r--@ 1 root admin 2048 Nov 4 02:29 Desktop DB
-rw-r--r--@ 1 root admin 2 Nov 4 02:29 Desktop DF
drwxrwxr-x@ 16 root admin 544 Nov 4 13:24 Developer
drwxrwxr-t@ 54 root admin 1836 Nov 4 15:16 Library
drwxr-xr-x 2 root wheel 68 Sep 23 16:37 Network
drwxr-xr-x 4 root wheel 136 Nov 15 19:42 System
drwxr-xr-x 5 root admin 170 Nov 4 00:29 Users
drwxrwxrwt@ 4 root admin 136 Nov 18 12:56 Volumes
drwxr-xr-x 40 root wheel 1360 Nov 3 23:32 bin
drwxrwxr-t@ 2 root admin 68 Sep 23 16:37 cores
dr-xr-xr-x 2 root wheel 512 Nov 18 12:56 dev
lrwxr-xr-x 1 root admin 11 Nov 3 23:32 etc -> private/etc
dr-xr-xr-x 2 root wheel 1 Nov 18 12:56 home
-rw-r--r--@ 1 root wheel 10256044 Oct 31 19:48 mach_kernel
-rw-r--r-- 1 root wheel 10696809 Oct 9 23:38 mach_kernel.ctfsys
dr-xr-xr-x 2 root wheel 1 Nov 18 12:56 net
drwxr-xr-x@ 7 root wheel 238 Nov 10 22:27 private
drwxr-xr-x 66 root wheel 2244 Nov 15 19:40 sbin
lrwxr-xr-x 1 root admin 11 Nov 3 23:32 tmp -> private/tmp
drwxr-xr-x 12 root wheel 408 Nov 4 02:08 usr
lrwxr-xr-x 1 root admin 11 Nov 3 23:32 var -> private/var
byron-duncans-mac-pro:/ Byron$ cd /user
-bash: cd: /user: No such file or directory
byron-duncans-mac-pro:/ Byron$ cd /users
byron-duncans-mac-pro:users Byron$ ls -al
total 0
drwxr-xr-x 5 root admin 170 Nov 4 00:29 .
drwxrwxr-t@ 33 root admin 1190 Nov 18 12:57 ..
-rw-r--r-- 1 root wheel 0 Sep 23 19:43 .localized
drwxr-xr-x+ 31 Byron staff 1054 Nov 18 12:57 Byron
drwxrwxrwt 4 root wheel 136 Nov 4 01:19 Shared
byron-duncans-mac-pro:users Byron$

Connection to hostname failed - Error 709

Hello All,
We are using a Linux system with EP 7.0 installed on it.
After restarting the system, it shows as :-
"Error while connecting to hostname failed - Error 709"
and when we do "nslookup"
it shows as :- "Connection to DNS server failed"
but when we type "hostname" , it shows corectly.
Could any one share more light on this. ??
Thanks in adv.
Regards,
Manomeet Moahapatra

hi manomeet,
inside of using ur host name name use the host name ip address and also check the dns server ip address in tcp/ip property.
Regards.
Kalenthirababu.p
"Reward point it will always encourage me to answer more question"

My playbook both cameras not working and also take a lot of time for device charging

Hi,
My blackberry playbook both cameras are not working and showing error 4003 and also having some charging problem. The reason of these problems only OS update. I i have walked to Blackberry service center today 11th Jan but they have told me my product is out of date by 2 days only it means warrenty was active till 9 January 2013. Now, Please give me suggestion what i have to do.
I have tried to reset and wipe out but same problem occur.

No,
I have update the OS first and then same problem occur again then i have chose to wipe data.
But not getting any solution

Pata_via: profe of ... failed error -16 and also ata: conflict

Similar Messages

Maybe you are looking for