Patches not sounding - a work around???
Can anyone else verify this? On Mac Pro with 2GB of RAM, I am also seeing the problem where, after a patch change, the first note/chord makes no sound. The second note/chord works (and usually everything after that, until another patch change, though it only occurs 1/3rd of the time for me).
But after I play through all patches (in this case, using the Rock template), the problem seems to no longer occur. This isn't great, but if this works, at least I can use this in a gig.
Is anyone else seeing this as a work around to the problem?
MainStage Fan wrote:
Thanks, that's what I'm getting at: does this work for everyone as a workaround? (that being, first go through all patches and play them).
This is the work around that I have found as well. For me, the last time I had a gig, I was concerned about playing them through during a rehearsal about an hour or two before the actual gig. I had wondered if I left the machine (and MainStage) running if when I came back, would the patches work the way they are supposed to. Fortunately in this instance I can report that they worked fine for the rest of the gig only requiring the play through just the first time at start up. So I think this is a useable work around for now (and hopefully not a deterrant from Apple to fix the problem). I can't help feeling like I am jumping without a net. If I had to reboot in the middle of a gig for whatever reason, it would be a real pain to disconnect from the FOH system just to go through each patch again to make sure it will properly sound when played.
Similar Messages
-
FF4 does not support Trend Micro Titanium and Trend Micro has not developed a work around. Have you?
Because of the existing problem with FF4 not supporting my paid subscription to my security software, I've used FF4 sparingly. Trend Micro is "developing" a work around. Can some one please suggest how I can start using Firefox again. I tried to go back to FF3. That didn't work out, either.
Found the following on the TrendMicro forum:
*TrendMicro forum: http://community.trendmicro.com/
*Found fix in this thread: http://community.trendmicro.com/t5/Home-and-Home-Office-Forum/Firefox-6-amp-TM-Firefox-Extension-6-5-0-1234/td-p/43735 (posted by PartyJetsetGo, Customer Service Manager)
*[Hot Fix] B1306: http://esupport.trendmicro.com/solution/en-us/1059243.aspx
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.''' -
Pictures missing in photo stream after empty-battery + work around
I recently had a situation where synchronizing photos between my iOS7 and MacOS 10.9 devices failed and/or showed strange effects (individual pictures missing).
After a day of annoying experiences I realised that the problems started after the iPhone (that I use for taking photos) had switched itself off due to an empty battery (there's just too much to see at the Carneval in Venice ;-) After fully charging the iPhone I took more photos but some (!) of the new photos (and some of the older photos) did not sync.
WORK AROUND: restarted the iPhone once more.Summary
Photo stream IS "Recently Added" as well as "Recently Taken" combined. If it was taken with this phone, it can be favorited. If not, there's no favorite (heart) icon.
Details
So I have 2 iphones I use, one for work, one personal. I do very little with the work one and never had photo stream turned on but I use the same itunes account for both so I can share itunes match and photos and contacts if/when I chose to.
I was confused about where photo stream went as well.
So prior to turning on photo steam on my work phone, I saw that I had 4 photos (mostly screen shots) on the work phone, under "recently added". I took a picture with the phone to be sure. Yup, it was added to recently added but not "summarized" (not sure why it wasn't summarized but nothing else is on that phone).
I have other settings to "default" including having "summarize photos" turned on.
I then turned on "My Photo Stream" and saw photos start getting added to "Recently Added". The count ended up being around 625 which is huge, but much less than the 1000 on my windows Photo Stream, and less than the 661 or so on my personal phone. Not sure if this is the 30 days limitation on my personal or what the limitation is on my work phone.
FYI, did all this with wifi so the download was moderately fast.
Another thing of note. Photos that were taken with the same phone have the favorite icon (the heart). Photos taken on the other phone do not. So that's how to tell if it's only on the photo stream. -
Work around for server not found problems on FF36
I have found a work around for all the people having server not found problems with FF36.
If you manually set your network adapter DNS to an external DNS server (as opposed to your local ISP) then the problem goes away. I set mine to use the two google DNS servers:
Preferred: 8.8.8.8
Alternate: 8.8.4.4
Not a clue why this works but it is 100% successful on my desktop PC, whereas before I could hardly connect to a webpage with FF36 without multiple page refreshes and much frustration, even though FF35 was fine and rolling back to FF35 was also fine.
Something has changed in FF36 and either the way it handles DNS or the way it works with some network adapters.
It is nothing to do with add-ons, profiles or firewall software as I have tried all of these things and only the DNS change made a difference. I even copied over a full working profile and the program files directory for Mozilla from my portable which was having no problems and the problem still existed on the desktop, which is why I started looking at the network adapater since everything else between the working PC and the non working one was identical.
Hopefully this will help the developers to pin down the real cause of the problem and fix it in the next release.Well done. Thanks for finding that.
That is not only assigned but has an approved patch included in the scheduled Fx36.0.1 release so it should be fixed in few days, watch out for the upgrade.
* Bug 1093983 - DNS resolver should not use 'ANY' to get cached records for TTL <sup>[https://bugzilla.mozilla.org/show_bug.cgi?id=1093983#c35 c#35]</sup>
* https://wiki.mozilla.org/Firefox/Channels/Meetings/2015-03-03#Schedule_Update
With the bug now fixed it would not really be appropriate to add further comment. I do now see another related bug assigned but not being fast tracked, so if all goes well that will probably land in Firefox 39.
* Bug 1138242 - DNS: Request A and AAAA record types rather than ANY when obtaining TTL on Windows -
Adobe Reader will not print documents and I have tried the work around
I cannot implement work around ! because my XP program does not offer a spot to give my printers a Share Name. So what do I do next?
What Adobe Reader version? If 10.1.2, try the patch: http://helpx.adobe.com/acrobat/kb/pdf-wont-print-reader-10.html
-
Revision: 13207
Revision: 13207
Author: [email protected]
Date: 2009-12-23 13:11:43 -0800 (Wed, 23 Dec 2009)
Log Message:
Accepted patch for UITextField textHeight property to work around an underlying bug in the player.
flash.text.TextField does not take into account the leading on the final line of text when measuring itself, yet will scroll if it is not given this extra height. The player has retired this bug.
Ported componentSmoke test to basicTests. If this fail it means the player has fixed the bug and we need to remove the workaround.
QE notes: components/Text/Properties/Text_Properties_tester Checking_Property_textHeight needs to be updated
Doc notes:
Bugs: SDK-24461
Reviewer:
Tests run: checkintests, mx Label, Panel, TextInput, TextArea and Text
Is noteworthy for integration: no
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-24461
Modified Paths:
flex/sdk/trunk/frameworks/projects/framework/src/mx/core/UITextField.as
flex/sdk/trunk/frameworks/tests/basicTests/halo/scripts/TextTestScript.mxmlRevision: 13207
Revision: 13207
Author: [email protected]
Date: 2009-12-23 13:11:43 -0800 (Wed, 23 Dec 2009)
Log Message:
Accepted patch for UITextField textHeight property to work around an underlying bug in the player.
flash.text.TextField does not take into account the leading on the final line of text when measuring itself, yet will scroll if it is not given this extra height. The player has retired this bug.
Ported componentSmoke test to basicTests. If this fail it means the player has fixed the bug and we need to remove the workaround.
QE notes: components/Text/Properties/Text_Properties_tester Checking_Property_textHeight needs to be updated
Doc notes:
Bugs: SDK-24461
Reviewer:
Tests run: checkintests, mx Label, Panel, TextInput, TextArea and Text
Is noteworthy for integration: no
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-24461
Modified Paths:
flex/sdk/trunk/frameworks/projects/framework/src/mx/core/UITextField.as
flex/sdk/trunk/frameworks/tests/basicTests/halo/scripts/TextTestScript.mxml -
Do not get an iphone 5 if you want to use it with a Chrysler product. The Chrysler Uconnect system might pair with your phone but the uconnect system will usually abend and become unusable after a few telephone conversations. I have been to the dealer twice. They have reset the uconnect system twice and I find it works for about 2 to 3 phone calls then it abends and uconnect becomes useless. They had me call Chrysler at 1-800-247-9753. I was told that the iphone five is not compatable at this time with any chrysler uconnect phone through the dash system, even the new vehicles. He had me get on this web site: www.uconnectphone.com as a place to monitor as when it would be compatable. They told me that Samsung seems to be working harder to make it compatible than apple is and they had no idea when it would begin to work. In effect Chrysler was telling me dump the iphone and get a Samsung if you want it to work in a Chrysler. Also, the site would only give you information for Chrysler that were 2008 or newer, they gave the following number to call if your vehicle was older. I called that number and they told me that Chrysler and Uconnect had no plans at all to make the iphone 5 work, in the future, on any Chrysler older than 2008. So.......If you have a Chrysler or Dodge that is older than 2008 you will NEVER be able to use an iphone5 on the uconnect through the dash system. Do not buy an iphone if you have an older vehicle. It will never be supported for the $1,000 you paid for this uconnect system on your car. My car is a 2005 Town and Country. I asked both Chrysler and uconnect if their was some sort of work around so I could use my phone. They both told me their was not and that they had no plans to resolve this situation for my vehicle. This means that I need to either get rid of my $42,000 vehicle with low milage or get rid of my Iphone 5. Niether are really good options.
I was also givne the following places to send formal complaints, even though I was told that neither Chrysler, Dodge or Apple were going to do anything to correct my problem:
for email: [email protected] or Mail: Chrysler customer Assistance P.O. Box 218004, Auburn Hills, Michigan 48321
If anyone hears of a work around to be able to use an Iphone 5 in a Chrysler or Dodge product, please let me know.This response is a little late as I just read about your problem. I have a 2012 Dodge Charger and a 2012 Chrysler Town and Country and both worked flawlessly with the iPhone 5s my wife and I had. However, we just upgraded to the iPhone 6 and Uconnect will receive calls but you cannot answer them. You can callout successfully, however. the annoyance being the inability to answer incoming calls in the HandsFree mode.
-
I have a new iPhone 5C, have the sounds alerts set up. But I'm not getting sound alerts for new voicemail, only the red circle on the screen. How can I make the sound alert work?
I have had this same problem for weeks now with my 4S. I just got a new 5S after being extremely frustrated and the same thing - no sounds. After searching posts all over, I couldn't find a solution. I just told my friend of the issue and he asked "Do you have the Do Not Distrub on?" I didn't even know such a function existed. Upon looking that was exactly the issue.
To resolve, go to Settings> Do Not Disturb> Manual. If it is green, turn it off. You will now get phone calls and text alerts.
This functionality is also on your quick access utility menu (slide up menu). I assume this is how it was enabled on my phone.
I will post on other sites since I searched for weeks for this solution and didn't see it anywhere. Good luck! -
Itunes 11.1.5 (MacBook Pro,OS 10.6.8) will not sync new apps with iPhone 5 iOS 7.0.6 and gives grayed out "install" no message? How does one work around this?
Just reboot your laptop... While its rebooting try to reboot your phone also by holding the home and power buttonn for 10-15 seconds...When your phone is turned off try to connect it to iTunes and it will recognize your phone in recovery mode.
If you have the .ipsw file for iOS 7.0.6 saved in your desktop then in itunes press shift and click on Restore.
Select the ipsw file and let it restore.
If you dont have it downloaded then simply click on restore.
I hope it works
Cheers ! -
Slider not working around 50% of the time.
Hello,
Slider not working around 50% of the time when I get a call. I hit the sleep button and home button several times and then it works.
I've done the soft reset several times. I've restored settings completely 2 times.
the screen is clean, my hands are clean, the wifi is off, the phone has not been dropped, it only happens when receiving a call and never happens when I'm just turing it on to access the menu. Bluetooth is off as well.
Any ideas?this happened to me a week or so after buying my iPhone. Fixed it with a reboot... Simul holding home and on/off until apple appears on the screen . Been working for axweek ok now.
-
IPhone not sending POP mail? Here's a work-around.
Like some other people out there, I haven't been able to get the Mail App on the iPhone to talk nice to my POP email host's server. It receives mail just fine, but will not send. I've tried all the fixes I could find suggested out there, and had several back-and-forths with my server host's tech support, and then spent (literally) two hours with an upper level Apple tech trying to get the device and server working together . . . to no avail.
Until such time as my server opens up a new hole and allows easier access . . . or until Apple figures out some way to penetrate the pinpricks that are already there . . . I've come up with a reasonably good work-around that might be helpful for some of the others out there who are having similar issues.
It's a little convoluted, but it's easy to do, and there's no hacking/tinkering . . . so just follow it step-by-step.
1. Create a Gmail Account. Ultimately, you'll be sending your regular POP account mail through their server . . . so you'll need a Gmail Account.
2. Once that's created, there's an option to: "Use Gmail to send from your other email addresses" . . . and we're gonna get that set up now. To do that, log into your Gmail Account. Then go to Settings (at the top-right of screen). Then go to Accounts (the second Tab over). Then, where it says: "Send Mail As:", click on the option to "Add another email address". That'll open up another box that let's you fill in the name and email address of an alternative email account. Put your primary POP email account information here.
3. Gmail will then take you through a brief verification process, to determine if, indeed, you actually have access to the POP email account that you're trying to "spoof". Just follow the instructions.
4. Now, let's fix our iPhone's settings so that our POP account can use Gmail's Outgoing SMTP mail server. Go to your Mail Settings, and select your POP account (assuming you've already got one created that has the Incoming mail part working just fine). Scroll down to your Outgoing Mail Server settings, and either turn off your delinquent primary server and add a new server with the settings I'm about to give you. Or, what I did was, just change your primary server info to the following:
5. Here's the server settings that will work:
Host Name: smtp.gmail.com
User Name: use your full gmail email address
Password: use your gmail password
Use SSL: Turned On
Authentication: Password
Server Port: 587
6. Now, you should be able to send mail from your POP account through the Mail App on the iPhone, using Gmail's SMPT server as a proxy. You can already use the AT&T outgoing server settings in this same way, actually . . . but only when you're on the AT&T network (Edge or 3G) . . . not when you're on a Wi-Fi network.
Truth is, this trick would work even if we didn't do Step #2 and Step #3 . . . but then the email that we sent from the iPhone would have our Gmail Account information in the headers of our sent email, rather than our POP accounts reply-to information. Following Steps #2 and #3 make it appear as though the mail was still sent from our primary POP account.
Hope that's useful for someone else out there, that's been knocking their head against a wall trying to get their mail up and running. I'll post this on a few forums.
All the best --
DI don't get any pop-ups anywhere nor any menus (if there are supposed to be some). The code is rather messy, also, with all those on-the-fly definitions for styles and endlessly long JavaScript actions. Quite possible that the links override one another. Not to ruin your day, but I'd definitely start from scratch with an empty page and a clean style sheet for the various elements. IMO that's the only way to get this working properly.
Mylenium -
Work around for radio tuner service not working
A work around for the lack of radio tuner service that has appearently hit Itunes versions lower than 11.
We all hope that Apple will restore Radio Tuner Service for us legacy products users soon, but I've been thrown under the bus more than once by Apple in the last 25 yrs to put much hope in that (I started with an Apple III w/a Z80 card running C/PM, yeah I'm that old)
Have your iTunes and your favorite browser open.
In your browser go to http://vtuner.com/setupapp/guide/asp/BrowseStations/startpage.asp
This will give you a list of Genre's, etc of streaming internet stations.
When you select a genre you'll get a list of stations that shows station ID, what type of feed codec and data rate.
Select any of the AAC or MP3 feeds.
Select play.
This will send a small download file to your computer containing the selected feeds URL.
Your computer will ask what app to use to open the file, select iTunes.
This will automatically open a file called Internet Songs at the end of Playlists in iTunes (if you don't already have one), and will install the URL there.
All the stations you selected will now be permanently stored in Internet Songs.
Viola, your very own custom personal internet radio playlist!
GT
Dual Core 2Ghz G5, 9.22/10.4.11/10.5.8Apperently iTunes 11 is not affected (Apple stil makes iTunes11 for the 14 yr old Microsoft XP OS, but not for anything PPCs can run. Go figure)
"Next door" to Steve was metaphoric, he lived in Los Altos, about 15 miles away, but he cast a big shadow!
On 9.2.1/10.4.11 differences, some time in the past someone selected 'save file' and checked the box 'don't ask again' on your computers dialog box. That's why you're not given a choice wih the file downloads. I would think that selection should be able to be reversed.
iTunes 9.2.1/OS10.4.11 puts those downloaded URLs into the Music Libary of iTunes, no matter if it's opened directly, or you click on the file on your desktop. You can create a new playlist, highlight the selection in the Music Libary, and drag it to your new playlist to keep alll the steaming URLs together. NOTE, this only creates an alias, the URL copied by iTunes must remain in the Music Libary. You can then delete the the files on the desktop, if you want. I did multiple stations this way in 9.2.1, they all show in either the new playlist created, or in the Music Libary, and remain after the desktop files are deleted and trash emptied.
You can switch sations by double clicking them. Another note, all the URLs were all from vtune.
I hope this helps.
PS, I forgot how clunky Tiger is compared to Leopard... -
Work around for iTunes not working with shuttle
Well, I have found a work around for the iTunes not working the the Shuttle. It is not pretty, and many of you may not choose to follow my lead. This procedure has a lot of dumb steps in it, but in the end, one can copy data/songs to a Shuttle.
It involves removing the current iTunes and replacing it with a version that also had a bug in it.( I told you it ain't pretty).
Procedure:
1. Go to this url: http://www.apple.com/downloads/macosx/apple/ipod_itunes/itunes802forwindows.html
2. Download the old 8.0 version of iTunes for Windows.
3. Remove the current iTunes from your computer. Note after you run the remove utility in Windows, you need to delete the iTune library that isn't removed.
4. Install iTunes 8.0
Here is where it gets dumb.
This version of iTunes has a bug with the USB interface, but there is an easy work around.
5. Make sure the Shuttle is not connected when you launch iTunes.
6. After iTunes comeup, attach the Shuttle.
7. iTunes should see your Shuttle.
8. Select the music you want to upload, and drag it to the Shuttle.
9. iTunes will just sit there, so you need to get its attention. To get its attention you must disconnect and reconnect one of your USB devices, just not the Shuttle. Some folks do their mouse, one used a USB drive, and another on used is GPS because he was working from a laptop and did not have a mouse.
10. In a few moments, iTunes will do its thing and copy your data to the Shuttle. You must do this routine for each copy, so if you develop a Play List, you only have to do step 9 once.
The getting the old copy of iTunes was my idea, but a gentleman from a year ago figured out the mouse step.
I am now a happy camper, my Shuttle is full of music again.
However, I hope Apple finds a fix for the 8.2 problem soon.
Take care all.I stand corrected on the name. By the time I figured out how to copy the songs I had a few other names in mind.
One of the first things I tried was the Reset utility. After the iTunes restore did not work, I went looking for something else. After using the utility, I connected the iPod and resynced. I had left the Autofill box checked. iTunes autofilled the iPod. I deleted those songs and tried to put a different play list in. It would not copy the songs, iTunes said there was no room even though the play list for the shuffle was empty. I looked at the settings screen and it said the iPod was full. I synced the iPod to my Mac, and that got rid of the "full" indication. That is when I started looking for an older version of iTunes, unfortunately all I could find is a version with the USB bug. -
Trying to connect my iMac to on 10.8.2 with PowerBook Intel on 10.5.8; sharing works from PowerBook to iMac but not the other way around. Why?
Thanks for the interest. Preferences are similar on both machines: screen sharing, file sharing, printer sharing & scanner sharing all ticked and radio button for Screen Sharing is ON.
My confusion is that I can get a network connection to the iMac by selecting "go to server" on the PowerMac running 10.5.8 but am unable to make the iMac connect to the PowerMac using similar selections. When ethernet cable is plugged in the PowerMac shows up on the finder bar on the iMac, but it does not allow either screen sharing or connection to occur - a dialog box tells me to check System Prefs and Network connection.
I'm hoping to export a large file of photos from iPhoto on my iMac to my wife's PowerMac and hoped to achieve this with an ethernet network connection. -
My speakers are not working when I try to play music or when I get notifications buh when I go to sound and increase and decrease sound it works HELP
Clean iPhone charging port with a clean dry toothbrush. The iPhone port has a short, and falsely senses it is in a dock device.
Maybe you are looking for
-
My Iphone4 just stopped saving pics to camera roll from screen shot,email,safari,text and more.....
I have a 32gb iphone4 with ios 4.3.5(8L1). Yesterday I was given ,via sd card, 6 pictures of me that were taken a few days ago. I emailed these pics from my home computer to myself so I could save them on my iphone4, so I could edit them in Camera+
-
Hi, A week ago, NVIDIA released new version 310.40 of their display driver: http://www.nvidia.com/object/linux-disp - river.html LINUX X64 (AMD64/EM64T) DISPLAY DRIVER Version: 310.40 Certified Release Date: 2013.03.08 Operating System: Linux 64-bit
-
has anyone found a way to back up a nokia telephone. i just switched to an imac from a pc and nokia pc suite doesn't have an imac version. thanks
-
Can i replace social icons in the Muse CC 2014 social widget?
I would like to replace the embedded social icons in the Muse Social Widget with some flat png icons I have. Can I?
-
Updated to maverick and my mac won't open
I just updated my mac with maverick and now it won't open