Pause while dialing

I know how to insert a 'P' while dialing, but the phone seems to need to sense that the call is connected, before it pauses. I guess that is needs to hear a ring to detect this. I use conference call numbers that never ring; they just pick up. The phone does not sense that it is connected and never executes the pause and therefore never sends the tones (the code to get into the conference). Any way around this?

Some info found by search:
http://discussions.apple.com/search.jspa?threadID=&q=dialing+pause&objID=c201&da teRange=last90days&userID=&numResults=15
Phil

Similar Messages

  • DIALING PAUSE while Dialing a number

    how do you DIAL PAUSE while dialing a phone number?
    It is a useful feature when calling voip servers
    IS Iphone a phone?

    Some info found by search:
    http://discussions.apple.com/search.jspa?threadID=&q=dialing+pause&objID=c201&da teRange=last90days&userID=&numResults=15
    Phil

  • Switching off of keyboard sound while dialing

    How can I switch off the keyboard sound while dialing a number? The keyboard sound itself is switched off so no sound will be played while typing an e-mail or text message.
    I am using BB Z10 running OS 10.0.10.90, German language.

    Volume buttons will turn off the dialing tones ( as well as the ringer).  Also setting the phone to silent or vibrate only profile.  Only workarounds I know of for this.

  • How to pause while document printing and wait for user actions.

    How to pause while document printing and wait for user actions. (for sample: pressed button). Pause after each printed pages.

    Print page by page after considering the user actions!

  • How to turn of the sound of the keyboard while dialing number on my Iphone5 ??

    How to turn of the sound of the keyboard while dialing number on my Iphone5 ??

    Setting-keyboard clicks-off --> just turn off keyboard sound while you write a message!!
    If I put my phone on mute I will not hear when somebody will calls me,or I must everytime before dialing a number put my phone on mute and after back turn in ON! apple apple apple ... one of the expensive mobiles these days,but not finalized !
    P.S. sorry for my english

  • Why does LabVIEW pause while I operate the slide control?

    I have a slide control inside a while loop. Something on the screen reacts immediately to the control as I slide it. This used to work, but now everything pauses while the control is being operated except for the control's own digital display. Even an indicator wired directly to the control, and also inside the loop, pauses until the control is let go then suddenly jumps to the control's current value. Both an indicator and a probe wired to the iteration count show the same thing.
    When I copied that same control into another VI with only a loop and an indicator, it works fine just as before.
    I've checked all the VI setup stuff and I can't see anything in the diagram that would cause this. I a
    lso tried deleting all of the control's local variables and attribute nodes to no avail.
    I'm using LabVIEW 5.0 in NT Workstation 4.0
    Does anyone have any idea what's going on.
    I'd appreciate any help.
    thanks,
    Louis

    Do you have a small wait inside of the while loop? I don't have any problem in version 5.1 or 6 when I put one inside. I typically use a delay of about 25 msec.

  • Screen recording-video pauses while audio continues

    When I make a screen recording, the audio and video are playing perfectly (I use soundflower for the audio). However, when I go to watch my screen recording, it starts off like normal but about 30 seconds into the video, the video pauses while the audio continues playing like normal. Any reason as to why this is happening? I'm not just recording my screen but also a video from a website, don't know if that makes a difference.
    Thanks

    I am having the same issue I posted this elsewhere
    I have a Mid 2010 Mac Mini Server (full specs below) and very recently it has developed a strange problem.  I'll be watching something on iTunes and the video will stop but the audio continues.  If I move the mouse and click on the screen the video suddenly plays very fast untill it catches up with the audio and then for a while it will play normally.  I can go through this process 3-4 times an hour before I give up and stream to my iPad instead.
    in the beginning it only happened when I was using the HDMI cable but recently it happens when the mini VGA adaptor is plugged in too.
    its beginning to be very frustrating so any help would be truly appreciated.
    thanks
    James
    Mac Mini Specs
    Intel Core 2 Duo 2.66 Ghz
    8GB Ram
    Running Lion Server 10.7.2 (111C74)
    ITunes 10.5.2

  • Unable to pause while recording in Captivate 6

    I've tried the Pause / Break button, it does not work to pause while recording.  I've also followed directions to go into Edit > Properties, but the I'm unaable to change option for the Global Preferences > To Pause / Resumre Recording button.
    Any suggestions appreciated!!

    Hi there
    See if the thread linked below helps to explain it.
    Click here to view
    Cheers... Rick

  • For tablet touch is very slow in firefox OS. Some times it is hanging. While dialing number to call it taking to much time. How to fix and debug this issue.

    For tablet touch is very slow in firefox OS. Some times it is hanging. While dialing number to call it taking to much time. How to fix and debug this issue. Waiting for your reply.

    Hi sb00349044,
    I'm sorry to hear that you are having problems with your Firefox OS device. Can you please specify the device Model and Version?
    If your device is one of the Firefox OS Tablets from the contribution program, please be aware that those builds are still being improved and ironed out. If that is the case, please follow the guidelines for the contributor program to report issues with the device.
    Thanks,
    - Ralph

  • IPCC calls went to voice mailbox while dialing the TOLL FREE NUMBER

    Hi All,
    We have an Cisco Call Manager & an IPCC server through which the cisco agent desktop users login & receives calls from the client. As you know the calls will route based on the Agents Login Activity/Availability. The clients dials the Toll Free number 866-123-4567 & the calls in-turn will route to 410-123-4567 & lands to one of the Cisco IP Phone IPCC extension.  Unfortunately today between 0700 & 1030hrs EST, all the clients whomsoever dials the toll free number, the calls goes to the voice mailbox & not to any of the Cisco IP Phone extension. The mystery is, when the client dials 410-123-4567, the calls will land to Cisco IP Phone IPCC extension to one of the user which is normal.
    Problem while dialing to the toll free number. Any ideas/clues? No changes made on the CCM/IPCC in the recent days.
    The issue happened today between 0700 & 1030hrs EST as mentioned earlier.

    Hi Abu,
    I use CCM-ver.4.1. I did not set any call forward option. Here is how the actual call takes place.
    Client dials -> 866-123-4567 or 410-123-4567 & then dials the extension 3319 for the support team. 3319 will inturn route to 4319 & looks in for any agent logged in & then routes the calls to their cisco ip phone extension.
    Client -> 866-123-4567 -> 3319 -> 4319 -> 5101 or 5102 or 5103
    Client -> 410-123-4567 -> 3319 -> 4319 -> 5101 or 5102 or 5103
    866-123-4567 is the toll free number which will be forwarded by the Telephone service provider to 410-123-4567 (866-123-4567 -> 410-123-4567)
    From the PSTN, the calls land on to the cisco router codec used on the CCM is G.711

  • Itouch pauses while playing...

    My Ipod touch will just pause while it's playing and the volume bar with go up and down, and tell me that I'm using my headphones when I'm really not. What's wrong with it?

    It sounds like there are issues with the headphone jack internals.
    As your most likely aware, the volume has two setting, one with the headphones plugged in, and one using the built in speaker.
    The switch inside the headphone jack is probably defective.

  • How to insert pauses in dialing chains while sending faxes.

    I need to dial several numbers to get long distance faxes out of my phone system but there seems to no way to enter a 3 second or so pause to the dialing chain I enter in the fax number "to" field.
    Also why are letters always showing up when I type numbers in the "to" box. This is really annoying. I have to enter the whole string then go back and change the letters to numbers.
    Thank you

    I'm not sure if this will help in this case, but you could try using a comma in the string.
    from: http://docs.kde.org/development/en/kdenetwork/kppp/appendix-hayes-commands.html
    , (a comma)
    makes your software pause for a second. You can use more than one , in a row. For example, ,,,, tells the software to pause four seconds. (The duration of the pause is governed by the setting of register S8.
    Hope this helps

  • Media encoder cc pauses  while I edit in premiere cc!

    If I try editing in premiere cc while encoding in media encoder cc, the encode pauses. what gives?

    If you'll notice your encoding in AME, it normally maxes out all your CPU cores.  It does mine.  This is awesome!
    But, if you want to edit, you need those cores, especially with Long-GOP footage that relies on CPU for real-time decompression.  So, in effect, you're telling your computer to let Pr take over the CPU when you start editing in Pr.
    It's a pretty smart way that Adobe enabled this behavior, if you ask me.

  • CC pauses while audio still plays on

    I'm seeing this behavior in CP6:
    1)      In 5.5 if you have a slide with narration, and CC and a pause object (button, clickbox), the playbar would pause at the set pause point, but the slide audio and CC would continue to play and display in a sync’d manner
    2)      In CP6, with the same setup, it appears the CC pauses with the regular timeline even as the audio continues to play.
    Can anyone confirm this issue and/or know of any work arounds?
    Jim Leichliter

    Hi Jim,
    I'm actually experiencing the same problem with CP6.  I only used CP5.5 for a brief while, but don't recall ever having this issue.  Audio continuing to play on pause in CP6 was brought to my attention by one of our trainers who was performing end-user testing for me.  I'm still trying to figure out a work around, have you had any luck?
    Thanks,
    Kevin

  • Pause While Loop disrupts everything

    Hello everyone
    I'm made a while loop which is suppose to take some numbers from some arrays, then solve them in a formular and output the data for a certain amount of time - countdown. All this works, but it is important for me that I can pause and start again from the same point in time. This is importan because I may have to pause during the operation and sometimes the countdown would be set for hours where I wouldn't like to restart the entire proces.
    I tried implementing a pause function but now It won't even start. Any body have any ideas?
    Thank you very much,
    Theis
    Solved!
    Go to Solution.
    Attachments:
    PauseTEST.vi ‏36 KB

    aeastet wrote:
    Theis Thorn wrote:
    aeastet wrote:
    Something like this.
    Ye! This looks something like it! I played around with it and adjusted af few things, like making it stop when it gets a zero input from the array. I do, still, have a few problems:
    Whenever it reaches 10 seconds it kinda stops and then suddently ticks up to 20 within 4 seconds, so it even counts to fast. I also added a lamps wich shows which process is running. I build this as an array and when it gets signal 1, it the first lamp turns on, same with 2 but at three suddently multiple lamps light up - weird! It seems like I'm inches away from reaching my goal. Any ideas?
    Well the reason you are getting multipul lamp is because the number going to your lamp array is binary 0,1,2,4,8, etc...
    As far as why it hangs I am not sure I will have to see what you did. Can you save this code with the default values that you are using so that I can see what is going on.
    Ohh! I see, that one I should be able to figure out!
    What do you mean by saving the code with the default values? I'm not sure if it this you mean but here are the values I just tested it with:
    Time (min) 0,2 ^ 0,1 ^ 0,3 ^ 0,4
    Weight (g) 4000 ^ 2000 ^ 4000 ^ 6000
    again, thank you

Maybe you are looking for