Payload reponse for a web code

Hi
I am working on an application where is am doing the recording and playback in web and not web/http .
Now i need to get the last browser response ( payload) response .......for the same similar to the response we get for the http code.
As for the http based testing i am able to get the last browser response in a xml format which is quite useful in getting the complete information.
But for the web based testing the payload we get if any is stored somewhere which we dont know , first of all i want to know if there are any functions to get the response straight away or if we are getting any response from the browser where is that loaded or saved ...
please help.
Thanks & Regards
Kate

Similar Messages

I am running 10.6.8 and using iweb for my web site. After several SEO analysis they all indicate I need H1-6 header tags. After looking at the source code I see there are none in iweb. Is it necessary to add? If so, how do I add H Tags to iweb.

I am running 10.6.8 and using iweb for my web site. After several SEO analysis they all indicate I need H1-6 header tags. After looking at the source code I see there are none in iweb. Are they necessary to add? Why would one add these tags and how do I add H Tags to iweb? And are there examples to look at? I am slowly learning about simple web design and assumed that iweb was stand alone without having to write code. Is this one of the reasons iweb is no longer supported? Thanks for looking at this!

A simple text page like this:
Heading
    sub heading
          text paragraph ....
Is traditionally represented by html tags like:
<h1>Heading</h1>
     <h2>sub heading</h2>
          <p>text paragraph ... </p>
I would guess that the use of h1-h6 tags helps search engines to understand the structure of a page as the tags imply a certain structure.
This can be compared to more generic tags like <div> that could represent any kind of content - and may be what iWeb uses (you'll have to check yourself).
I would generally recommend that you use some kind of up to date blog/site building tool, perhaps Wordpress or Squarespace (I haven't used either one myself) that support current web technologies - this should reduce your SEO issues and make it easier to properly support mobile/tablet users.

Hard drive died. Need to reinstall on new laptop with windows 7 64 bit system, Need to get activation code for CS3 Web Premium.

Hard drive died. Cannot uninstall CS3 to remove copy registration. Need to reinstall on new laptop with windows 7 64 bit system, Need to get activation code for CS3 Web Premium.

Thank you Bob.
Just to clarify - in terms of backing up one set of these, would that just be so I had it on disk and didn't need to re-download from Adobe if the installation got corrupted somehow? Or do I need a backup for some other reason?
Thanks

Html code(source code) for a web page

hi all
i want to get the source code for a web page throgh
my java program .please can you tell me how to do it.
thanks

give this a try.
import java.awt.*;
import javax.swing.*;
import java.net.*;
import java.io.*;
public class JApplet1 extends JApplet
     public void init()
          getContentPane().setLayout(null);
          setSize(470,391);
          JButton1.setText("google.com");
          getContentPane().add(JButton1);
          JButton1.setBounds(12,12,120,24);
          getContentPane().add(JScrollPane1);
          JScrollPane1.setBounds(12,48,444,336);
          JScrollPane1.getViewport().add(JTextArea1);
          JTextArea1.setBounds(0,0,440,332);
          SymMouse aSymMouse = new SymMouse();
          JButton1.addMouseListener(aSymMouse);
     javax.swing.JButton JButton1 = new javax.swing.JButton();
     javax.swing.JScrollPane JScrollPane1 = new javax.swing.JScrollPane();
     javax.swing.JTextArea JTextArea1 = new javax.swing.JTextArea();
     class SymMouse extends java.awt.event.MouseAdapter
          public void mouseClicked(java.awt.event.MouseEvent event)
               Object object = event.getSource();
               if (object == JButton1)
                    JButton1_mouseClicked(event);
        URL u;
     URLConnection conn;
     InputStreamReader in;
     BufferedReader data;
     String line;
     StringBuffer buf = new StringBuffer();
     void JButton1_mouseClicked(java.awt.event.MouseEvent event)
         try{
             u = new URL("http://www.google.com");
              conn = u.openConnection();
              in = new InputStreamReader(conn.getInputStream());
              data = new BufferedReader(in);
              while((line = data.readLine()) != null)
                  buf.append(line + "\n");
              JTextArea1.setText(buf.toString());
          }catch(Exception e){}
}

Code for Responsive Web gallery

Hi, I'm looking for some sample code for Responsive web galleries. Not Flash ones. Web ones.
Ones that will respond to tablets, pads, and various web pages, including iPhone/iPad even (no flash)
Straight forward web pages are fine. Maybe HTML5, and Responsive.
Thanks for any help.

Have you checked out http://shop.theturninggate.net/collections/core-elements-3/products/2014-html-gallery to see how they do it? It is a free gallery for Lightroom 4/5 and you should be able to take a look at the code and see how it was done. That should get you going in the right direction.

How can i set a global error page for all error cod

how can i set a global error page for all error code?
i don't want to leave a long list in the web.xml file.could any one help me?
thanks

If u have a common Error JSP named as ErrorPage.jsp
You need to have the following piece of code in the JSP as :
<%@ page isErrorPage ="true"%>
This makes it as the Common Error Page for the Application. Now all you need to do is from other JSP's throw the Exception to teh container. The container will redirect to this Page and process accordingly.
Thanks and regards,
Pazhanikanthan. P

Saving JPG to PNG using Save for the Web

Morning
I came across Paul Riggott's script for saving PSD to PNG which I changed to JPG to PSD.
The only problem with this is that the file size in most cases is larger than the original.
Is there a way to do a save as for the web as well?
Here is the original code:
#target photoshop
var imageFolder = Folder.selectDialog("Select top folder to process");
var folderList=[];
if (imageFolder != null) {
processFolder(imageFolder);
folderList.unshift(imageFolder);
createPNGfromJPG(folderList);
function createPNGfromJPG(folderList){
for(var a in folderList){
var fileList = folderList[a].getFiles ("*.jpg");
   for (var z in fileList){
    var file = fileList[z];
    open(file);
    var Name = fileList[z].name.replace(/\.[^\.]+$/, '');
    var saveFile = File(decodeURI(fileList[z].path+"/"+Name+".png"));
    SavePNG(saveFile);
    app.activeDocument.close(SaveOptions.DONOTSAVECHANGES);
function processFolder(folder) {
    var fileList = folder.getFiles()
     for (var i = 0; i < fileList.length; i++) {
        var file = fileList[i];
if (file instanceof Folder) {
folderList.push(file);
       processFolder(file);
function SavePNG(saveFile){
    pngSaveOptions = new PNGSaveOptions();
    pngSaveOptions.embedColorProfile = true;
    pngSaveOptions.formatOptions = FormatOptions.STANDARDBASELINE;
    pngSaveOptions.matte = MatteType.NONE;
    pngSaveOptions.quality = 1;
pngSaveOptions.PNG8 = false;
    pngSaveOptions.transparency = true;
activeDocument.saveAs(saveFile, pngSaveOptions, true, Extension.LOWERCASE);
Any help or support to head me in the right direction would be appreciated.
Iain

This uses "Fitimage"....
#target photoshop
var imageFolder = Folder.selectDialog("Select top folder to process");
var folderList=[];
if (imageFolder != null) {
processFolder(imageFolder);
folderList.unshift(imageFolder);
createPNGfromJPG(folderList);
function createPNGfromJPG(folderList){
for(var a in folderList){
var fileList = folderList[a].getFiles ("*.jpg");
   for (var z in fileList){
    var file = fileList[z];
    open(file);
    var Name = fileList[z].name.replace(/\.[^\.]+$/, '');
    var saveFile = File(decodeURI(fileList[z].path+"/"+Name+".png"));
    FitImage(640,640); //Resizes to the longest size
    //FitImage(128,128);
    savePNG8SFW(saveFile);
    app.activeDocument.close(SaveOptions.DONOTSAVECHANGES);
function processFolder(folder) {
    var fileList = folder.getFiles()
     for (var i = 0; i < fileList.length; i++) {
        var file = fileList[i];
if (file instanceof Folder) {
folderList.push(file);
       processFolder(file);
function savePNG8SFW(saveFile) {
    var desc8 = new ActionDescriptor();
        var desc9 = new ActionDescriptor();
        desc9.putEnumerated( charIDToTypeID('Op '), charIDToTypeID('SWOp'), charIDToTypeID('OpSa') );
        desc9.putEnumerated( charIDToTypeID('Fmt '), charIDToTypeID('IRFm'), charIDToTypeID('PNG8') );
        desc9.putBoolean( charIDToTypeID('Intr'), false );
        desc9.putEnumerated( charIDToTypeID('RedA'), charIDToTypeID('IRRd'), charIDToTypeID('Sltv') );
        desc9.putBoolean( charIDToTypeID('RChT'), false );
        desc9.putBoolean( charIDToTypeID('RChV'), false );
        desc9.putBoolean( charIDToTypeID('AuRd'), false );
        desc9.putInteger( charIDToTypeID('NCol'), 256 ); //Number of colours.
        desc9.putEnumerated( charIDToTypeID('Dthr'), charIDToTypeID('IRDt'), charIDToTypeID('Dfsn') );
        desc9.putInteger( charIDToTypeID('DthA'), 100 );
        desc9.putInteger( charIDToTypeID('DChS'), 0 );
        desc9.putInteger( charIDToTypeID('DCUI'), 0 );
        desc9.putBoolean( charIDToTypeID('DChT'), false );
        desc9.putBoolean( charIDToTypeID('DChV'), false );
        desc9.putInteger( charIDToTypeID('WebS'), 0 );
        desc9.putEnumerated( charIDToTypeID('TDth'), charIDToTypeID('IRDt'), charIDToTypeID('None') );
        desc9.putInteger( charIDToTypeID('TDtA'), 100 );
        desc9.putBoolean( charIDToTypeID('Trns'), true );
        desc9.putBoolean( charIDToTypeID('Mtt '), false );
        desc9.putInteger( charIDToTypeID('MttR'), 255 );
        desc9.putInteger( charIDToTypeID('MttG'), 255 );
        desc9.putInteger( charIDToTypeID('MttB'), 255 );
        desc9.putBoolean( charIDToTypeID('SHTM'), false );
        desc9.putBoolean( charIDToTypeID('SImg'), true );
        desc9.putBoolean( charIDToTypeID('SSSO'), false );
            var list3 = new ActionList();
        desc9.putList( charIDToTypeID('SSLt'), list3 );
        desc9.putBoolean( charIDToTypeID('DIDr'), false );
        desc9.putPath( charIDToTypeID('In '),File( saveFile) );
    desc8.putObject( charIDToTypeID('Usng'), stringIDToTypeID('SaveForWeb'), desc9 );
    executeAction( charIDToTypeID('Expr'), desc8, DialogModes.NO );
function FitImage( inWidth, inHeight ) {
if ( inWidth == undefined || inHeight == undefined ) {
alert( "FitImage requires both Width & Height!");
return;
var desc = new ActionDescriptor();
var unitPixels = charIDToTypeID( '#Pxl' );
desc.putUnitDouble( charIDToTypeID( 'Wdth' ), unitPixels, inWidth );
desc.putUnitDouble( charIDToTypeID( 'Hght' ), unitPixels, inHeight );
var runtimeEventID = stringIDToTypeID( "3caa3434-cb67-11d1-bc43-0060b0a13dc4" );
executeAction( runtimeEventID, desc, DialogModes.NO );

Writing web code on a Mac???? And FTP Programs?

Alright, so bear with me on this one. I've been using mac's for years for my graphic design and graphic pieces of my web sites, but I still use my PC to write the code (HTML, JavaScript, CSS, mostly) that the sites run on. I write it, in true old-fashioned sense, in Notepad.
However, now my overglorified word processor (PC) is being totally, ridiculously, slow and acting weird... I think it did this before my last Blue Screen of Death, so luckily I've backed up everything important. Anyway, I thought I'd give writing code on the Mac (a gorgeous 20" imac, in all its wondrous glory) a shot. Here's what I've done:
- Open TextEdit, type in a few lines of test code.
- Save As : select HTML as the file type, with a file name of "Test" or something.
- Open the file in Safari, expecting to see a real, webpage. Instead? I see my code. Black text, white background, flaunting every little
and tag like a defiant child smearing raspberry jam all over my couch.
I just can't switch to a WYSIWYG editor and lose the (tyrannical) control I've had over my web pages from writing the code in notepad. So what should I be doing to write code on a mac? I need to know soon, since my PC will be exploding any day now. Any help would be GREATLY appreciated.
P.S. I'd prefer not to have to spend any money to purchase a text editor for web code. Am I being cheap? I don't really know. But if I can use a program that's already on my mac, I'm all for it.
P.P.S. Also, I've been uploading code/images/etc. to my hosts via the WinSCP FTP software, on a PC. Can anyone recommend good FTP software for OSX (10.4.10).

Both of iFelix's suggestions are great free apps and I would recommend them also.
If you don't mind shelling out some money for the apps (after a trial of course), I myself use Panic's Coda (http://www.panic.com/coda/) for coding. A lot of people also prefer apps like TextMate (http://macromates.com/).
CSSEdit (http://macrabbit.com/cssedit/) is a really nice combination of a WYSIWYG and source editior strictly for CSS also (Coda has this sort of functionality built in also).
As far as FTP, if you arent happy with the free options, Panic makes an app called Transmit (http://www.panic.com/transmit/) that is excellent, and is also basically built into Coda.
Message was edited by: shadeDream

Dynamic destinations for adaptive web service in webdynpro for java

Hi,
Please advice me on how to create dynamic destination for adaptive web service model in webdynpro for java.
Regards,
Patana

Hi,
If this is the case, then use the HTTP destination for this.
What you need to do is:
1. Create one HTTP destination in visual administrator at services-> Destinations. Provide HTTP url of the your web service and the security options.
2. Specify this HTTP destination in the code before executing web service model.
Write following code for that:
wdContext.current<node name>Element().modelobject()._setHTTPDestination(<Specify HTTP destination name>);
Then execute your web service model.
Now, whenever you want to change the server on which your web service is running, make change in the HTTP Destination in visual administrator.
Refer this link,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b2bc0932-0d01-0010-6d8e-cff1b2f22bc7
Regards,
Sunaina Reddy T

Creating SOAP Receiver comm.channel for axis web service

Hi,
I created Soap Receiver comm. channel fro Axis web service like below:
*Target URL* : http://<IP>:<Port>/<x>/service
*User:* <user>
*Password :* <password>
*SOAP Action:* <target namespace>/method
when i drive PI Message that use Soap Receiver it get error below
I do same method for .Net web service, it runs properly.
How can i solve this problem?
Error
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">NO_MAPPINGPROGRAM_FOUND</SAP:Code>
<SAP:P1>Object ID B3004965647F340C997B5F2CC9EA7E22 Software Component 4CF44F80503211DEB2A0D3F40A194B29</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Mapping program is not available in runtime cache: Object ID B3004965647F340C997B5F2CC9EA7E22 Software Component 4CF44F80503211DEB2A0D3F40A194B29</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

Hi,
I did all but nothing changed?
I have doubt about axis side. Because respose like below.
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="UNKNOWN">APPLICATION_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>application fault</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="http://xml.apache.org/axis/">hostname</SAP:ApplicationFaultMessage>
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
May be Soap Receiver setting for axis web service must be different.
Thanks.

Directory lister for the web.

Hi
Here iam attaching my project code for my particualr aplication
The source code for a directory lister for the web. You give it
one or more URLs as arguments and its not displays the formatted results .. can any body will help me
import java.util.*;
import java.net.*;
import java.io.*;
public class WebList extends abcd.Application
static final String progName = "WebList";
public static void main( String[] args )
(new WebList()).compat( args );
public int newMain( String[] args )
int argc = args.length;
if ( argc == 0 )
usage();
return -1;
for ( int argn = 0; argn < argc; argn++ )
if ( argc > 1 )
if ( argn > 0 )
out.println( "" );
out.println( args[argn] + ":" );
list( args[argn] );
return 0;
private void usage()
err.println( "usage: " + progName + " URL ..." );
void list( String urlStr )
String base = abcd.Utils.baseUrlStr( urlStr );
Enumeration as;
try
as = new abcd.Spider( urlStr, err );
catch ( MalformedURLException e )
err.println( e );
return;
while ( as.hasMoreElements() )
URLConnection uc = as.nextElement();
if ( uc == null )
continue;
URL thisUrl = uc.getURL();
String thisUrlStr = thisUrl.toExternalForm();
if ( thisUrlStr.startsWith( base ) )
thisUrlStr = thisUrlStr.substring( base.length() );
if ( thisUrlStr.length() == 0 )
thisUrlStr = ".";
String mimeType = uc.getContentType();
int len = uc.getContentLength();
long mod = uc.getLastModified();
Date modDate = new Date( mod );
String modDateStr = abcd.Utils.lsDateStr( modDate );
out.println(
abcd.Fmt.fmt( mimeType, 14, abcd.Fmt.LJ ) + " " +
abcd.Fmt.fmt( len, 8 ) + " " +
modDateStr + " " + thisUrlStr );
try
InputStream in = uc.getInputStream();
in.close();
catch ( IOException e ) {}
}

Hi,
It is enumerating the files reachable at or
below those URLs, i hope it will full fill your application requirements.
and also in the for loop you have to do pre increment not post increment so it may be the casue for entier your logic ..
as per my knowledge iam changing the code .. i hope it will work for your application...
still if you have any querys please post me with details of your projects so that i can help you more..
here is modified code:
=================
import java.util.*;
import java.net.*;
import java.io.*;
public class WebList extends abcd.Application
static final String progName = "WebList";
public static void main( String[] args )
(new WebList()).compat( args );
public int newMain( String[] args )
int argc = args.length;
if ( argc == 0 )
usage();
return -1;
for ( int argn = 0; argn < argc; ++argn )
if ( argc > 1 )
if ( argn > 0 )
out.println( "" );
out.println( args[argn] + ":" );
list( args[argn] );
return 0;
private void usage()
err.println( "usage: " + progName + " URL ..." );
void list( String urlStr )
String base = abcd.Utils.baseUrlStr( urlStr );
Enumeration as;
try
as = new abcd.Spider( urlStr, err );
catch ( MalformedURLException e )
err.println( e );
return;
while ( as.hasMoreElements() )
URLConnection uc = (URLConnection) as.nextElement();
if ( uc == null )
continue;
URL thisUrl = uc.getURL();
String thisUrlStr = thisUrl.toExternalForm();
if ( thisUrlStr.startsWith( base ) )
thisUrlStr = thisUrlStr.substring( base.length() );
if ( thisUrlStr.length() == 0 )
thisUrlStr = ".";
String mimeType = uc.getContentType();
int len = uc.getContentLength();
long mod = uc.getLastModified();
Date modDate = new Date( mod );
String modDateStr = abcd.Utils.lsDateStr( modDate );
out.println(
abcd.Fmt.fmt( mimeType, 14, abcd.Fmt.LJ ) + " " +
abcd.Fmt.fmt( len, 8 ) + " " +
modDateStr + " " + thisUrlStr );
try
InputStream in = uc.getInputStream();
in.close();
catch ( IOException e ) {}
Regards,
TirumalaRao.
Developer Technical support,
sun MicroSystem, India.

Location of the JARs for BO Web services SDK

Hi,
I want to use the web services SDK to access the crystal reports on a crystal reports 2011 server. I added all the JARs in the C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\java\lib folder but none of them contain classes from the com.businessobjects.dsws package which is root package for the web services SDK.
My questions:
Where are the JARs located ?
Is there sample code that excerices the usage of the BO BI 4.0 web services SDK ?
Thanks

Hi Asif,
Please have a look over below link
Web Services Sample Code: -
[https://wiki.sdn.sap.com/wiki/display/BOBJ/JavaWebServicesSDKSamples|https://wiki.sdn.sap.com/wiki/display/BOBJ/JavaWebServicesSDKSamples]
Web Services Developer Guide:
[http://help.sap.com/businessobject/product_guides/boexir4/en/xi4_wssdk_dg_en.zip|http://help.sap.com/businessobject/product_guides/boexir4/en/xi4_wssdk_dg_en.zip]
Getting Started with Web Service sdk:
[http://wiki.sdn.sap.com/wiki/display/BOBJ/GettingStartedwiththeWebServicesSDK|http://wiki.sdn.sap.com/wiki/display/BOBJ/GettingStartedwiththeWebServicesSDK]
Regards,
Rameez

WLC 2504 - French characters for guest web login page

Good day,
I have recently installed a WLC 2504 and I have the following issue:
When I modify the text for the web login page (Under security/Web Auth/Web Auth page), if I use french caracters such as (é, è, à, etc...) in the message body, it does not show up correctly on users computers. As we're a bilingual country, I must put a bilingual text message. Are there any settings or workaround out there to rectify this?
We're on version 7.2.103.0
Thanks,
Eric

Thanks Scott, I'll have a look at the documentation.
Right after sending this post, I tried typing the actual HTML code for the character instead and it seems to be working. I'm curious about custom webauth page, we may be able to customize it more than we thought we could do.
Cheers,
Eric

Jsp for apache web server

hi all,
i am new 2 the field of JSP & web servers.
i have installed apache web server on a unix box. i am invoking the jsp files from a win - 2000 machine.
i want to know if the apache web server can interprett the java code (JSP)that is embedded in html. if not what other web server should i use.
The jsp code is not being interpretted. the output for the foll code is:
HELLO WORLD
HELLO WORLD
<HTML>
<TITLE>
HELLO
</TITLE>
<BODY>
HELLO WORLD
<br>
<%= new java.util.Date() %>
HELLO WORLD
<% System.out.println("HELLO ALL") %>
</BODY>
</HTML>
Do i have to use some other server like Blazix or will apache web server do the job for me???
thanx in advance

Double-posted:
http://forum.java.sun.com/thread.jsp?forum=45&thread=388900&tstart=0&trange=30

Web-service client for legacy web service

I currently access a legacy server (Lotus Domino 7) via CORBA. I thought a web service (my second) would be faster, but a whole day's research has uncovered only obsolete or trivial examples.
The WSDL generated by the server is rpc/encoded so wsimport cannot generate the necessary "artifacts" for a web service client.
The web service is simple: it accepts two java.lang.Strings, and returns a java.lang.String of XML. The "dynamic proxy" approach from 1.4.2 seems to have disappeared; I was hoping that approach would let me just hand-code a single "artifact" - an SEI based on the method information in the WSDL.
1) What classes in JAX-WS will let my web service client communicate with rpc?
2) With such a simple signature, do I need any other "artifacts" beyond an SEI?
Thanks for any help!

In case anyone's search leads them here, I've posted the solution at:
*[http://www.pby.com/general.nsf/webarticles/dominowebservice01]*
It is an exhaustive article (not "Hello World"!) that goes through several versions of the web service and client - hopefully explaining all* pieces of the puzzle:
~ web service code,
~ WSDLs
~ schema
~ thoroughly-documented clients that do and do not use JAXB
~ ... that use generated artifacts
~ ... that customize existing POJOs
~ the SOAP messages generated in each direction
~ the necessary JAXB annotations
~ explanations of how the code works
~ explanations of how namespaces affect the code
~ on and on and on...
My constant goal was to write an uncomplicated solution that uses as few artifacts (two) and annotations as possible. The end result is a small, fast JAX-WS 2.0 client that uses JAXB to invoke and consume a secured Domino 7 (1.4.2 JVM + AXIS) web service, using RPC/literal SOAP messages.

Payload reponse for a web code

Similar Messages

Maybe you are looking for