PayloadZipBean - with file sender adpater
Hi,
I would like to use a standard adapter module "PayloadZipBean" in my sender file adapter for UNZIPPING of payload. I have followed the steps required but no action is performed. so it will be really helpful if some can show me the same with sender adpater with screens. Looking forward for your quick reply.
Pls share any blog details like I have for receiver file adapter for zipping of files: /people/gabrielsagayaselvam.panneerselvam/blog/2009/12/07/standard-adapter-framework-modules-afmodules-in-pi-71-150part-1
-Surender
Hi Pragati,
Now it's pcking up my zip file from the folder I have mentioned in the " File Access Parameters".
I am missing the step where we need to mention where it will perform unzip action and place all .txt files. Once thisi sender file adapter will place all .txt files to a specified folder we will go to the next step for content conversion and send the files for mapping.
pls help me in getting those parameters to define.
-SS
Similar Messages
-
Problem with file sender adapter and endSeparator
Hy,
have the following situation: with a sender File adpater i have to receive the same structure of data but in two mode.
1) First mode : each recorset is defined as a file line
Example (not fields separator):
fielda,fieldb,fieldc
field2a,field2b,field2c
2) Second mode : recorset of the same line without end
separator and fieldseparator
Example (not fields separator):
fielda,fieldb,fieldc,field2a,field2b,field2c,......
I configured the adapter as follow.
structure.fieldFixedLengths 1,2,3
structure.fieldNames field1,field2,field3
structure.lastFieldsOptional YES
structure.processFieldNames fromConfiguration
structure.endSeparator 'nl'
PROBLEM
Mode 1) works but mode 2) doesn't work.
Could anyone solve my problem??
Thank's
MatiHi,
Try using two differnt record structure name for each mode.for eg give it as structure1 and structure2.then u give the content conversion parameter for both the recordset depending on ur requirement i.e, with and without end seperator.
regards
jithesh -
How to ignore columns in CSV File with File Sender Adapter
Hi,
I have a CSV File that I need to load with XI. The File contains 10 columns but I only need the data from 3 columns, let's say column 1,4 and 7. Can I configure the XI File Sender Adapter in a way that it only loads the data for the required columns and ignores the rest?
Thanks in advance.
AlexAlex,
Dont think so. Why not create Dummy fieldName for these columns you want to ignore.?
Regards
Bhavesh -
Pick up a specific file with File Sender Adapter.
Hi guys,
I would like to know how I can pick a specific file in a file pool (folder)? I would like to choose this file by name, like FileA or FileB, etc.
Im asking this because I have an asynchronous file scenario (BPM) with a receiver adapter that put the File with a specific name (variable substitution) in a folder.
And I would like to do something like this:
In another asynchronous scenario (BPM), a File sender adapter picks up this specific file (using the name). The correlation is made trough an IDOC that XI receives before pick up the file, this IDOC has payload field with the name of file to be picked.
Is it possible receives the IDOC, read the field with the name of the file to be picked and choose this specific file? In a Sender File Adapter how I can do something like variable substitution like receiver adapter does.
Thanks in advance,
Ricardo.Hi,
<i>Is it possible receives the IDOC, read the field with the name of the file to be picked and choose this specific file? In a Sender File Adapter how I can do something like variable substitution like receiver adapter does.</i>
No this is not possible. The only dynamic thing you can do is use wild card characters like *.
So, maybe you can pick a file like . or AA. and so on...
Regards,
Bhavesh -
Problem with File Sender directories
Hi everybody.
I have a File Sender.
I´d like to generate dynamically the "Archive Directory" and "Directory for Archiving Files with Errors"
How could I get that?
RegardsHi Cristian,
Here we have to see two things :
1. For one sender communication channel you can have only one Archive directory and
as a standard it has to be hard coded while channel configuration.doing it dynamically is not possible i guess.
if you don't have too many archive directories using multiple channels would be an option.
2. How you will identify the file with errors ? If you have some conditioning to check for a invalid
file then i think you can configure a service with a conditions to route all the invalid files through one channel
in receiver determination(default receiver).
Or if you can tell if the file is good or bad , only when the target system receives and validates
it then i think a BPM can be configured to receive the ack flag and send the file to Directory for
Archiving Files with Errors.
Regards,
Srinivas -
How to specify source directory in File sender adpate using (NFS)?
Hello experts,
I am doing File-PI-Proxy scenario.
Input file is available on machine which is within the Network area and FTP is not available on that machine.
For this reason I am using the NFS Transport Protocol.
In ID File sender I have specified Source Directory:-
IP Address\Directory
I am geeting the Error in RWB as 'Configured source directory '
IP Address\Directory' does not exist'.
Please suggest how to specify the Source Directory path.
Regards,
JageshHi,
If you want to use NFS protocol, then the file needs to be within the a folder in the XI server and not outside it, In your case if you need to use the file in a different machine which is on a network then try to use the FTP protocol.
Refer this blog:
/people/shabarish.vijayakumar/blog/2006/08/01/along-came-a-file-adapter-mr-ftp-and-rest-of-the-gang which shows the details of how you can install a local FTP and use it
Regards,
Nithiyanandam
Edited by: Nithiyanandam A.U. on Mar 18, 2009 10:43 AM -
Hi All,
I'm using the sync-async bridge for the following scenario.
An HTTP request(sync) is made to XI and the message is passed to the first receive step of a BPM. The BPM will send the message asynchronously to a business system which has a file adapter and creates a file. Another file adapter polls for this file (Delete Mode), and as soon as the file is created, reads it and sends a message to the Second receive step of the BPM asynchronously. Then the Second Send step will synchronoulsy send this message back and closes the SA-Bridge.
The problem is in the Second receive step. Instead of sending an asynchronous message after reading the file, the message sent is shown synchronous. The interface used is also asynchronous. Also the file adapter is not deleting the file after picking it up. It continuosly reads the same file and sends many messages.
Does someone have any idea, why this problem occurs. Note that I'm not using an integration scenario. I have created 3 receiver determinations.
1. Fromm HTTP to BPM
2. From BPM to File System
3. From File System to BPM (This step gives the problem)
Can someone help me out?
Thanks,
SandeepCheck if ur response msg is correlated to request message, or else XI will not be able to map the response to request structure
if in doubt chk this blog
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi -
File Sender Content Conversion: Help needed
Hello Experts,
i need help with file sender content conversion:
i have a file which looks like this:
12329460 24.01.09/07:01 167 Y010122851 136086 43300007 E70115 1L2_96_1
12329660 25.01.09/07:02 157 Y010122851 136086 43390007 E711J5 1L2_96_1
as you can see 8 fields, separated with whitespaces
and i want and xml file which looks like this:
<DT_DATA_FILESENDER>
<Recordset>
<Data>
<field1>12329460</field1>
<field2>24.01.09/07:01</field2>
<field3>167</field3>
<field4>Y010122851</field4>
<field5>136086</field5>
<field6>43300007</field6>
<field7>E70115</field7>
<field8>1L2_96_1</field8
</Data>
<Data>
<field1>12329660</field1>
<field2>25.01.09/07:02</field2>
<field3>157</field3>
<field4>Y010122851</field4>
<field5>136086</field5>
<field6>43390007</field6>
<field7>E711J5</field7>
<field8>1L2_96_1</field8
</Data>
</Recordset>
Would you please let me know how the datatype has to look like?
And especially how the FCC has to be configured for this scenario?
Thanks in advance,
Chris> With fixed lengths i get it working,
>
> but with de fieldseparator 0X09 it does not work,
> would you please tell me the complete FCC config not only the fieldSeparation line?
Well Christian,
There is one thing, eithere you can use fieldSeparator or fieldFixedLengths you can not use both together. So in your case do not use fieldSeparator.
The complete FCC is almost same as given in the blog in my previous reply. See the final output in that blog and create your data type accordingly. e.g.
Recordset
------Item 0...unbound
--------Field1 0..1
--------Field2 0..1
--------Field3 0..1
--------Field8 0..1
Regards,
Sarvesh -
File sender adapter is not working
Hello All,
We are facing a problems with file sender adapter. Communication channel is not picking the files from the directory, but the status in RWB for that channel is 'Functioning'. We are not sure whether the channel is locked or any other problewm with adapter. (In Alternate option, we have created copy of that channel and when it is activated, it picked the file )
Can anyone help us how to identify whether channel is locked and any other solutions in this case.
Regards,
Sreenvias.Hi Srinivas,
The file adapter ( The respective channel) is definitely locked in PI . Ideally for each polling interval a lock is being created and once the processing is over , the lock should be released/deleted automatically to allow further polling interval. If the lock is not released by the system automatically,further polling will not happen as expected. ( This may affect all sender file adapters as well. I would recommend to do a check in al sender file communication channels)
You can see/delete the locks in Visual admin.
Go to Server>Services->Locking adapter and click refresh
The entries for file adapter ( with name $XIAFFileAdapter) should be deleted by selecting those particilar entries and click delete selected locks.
If you have more than one node, then same should be done in all server nodes.
The temprory solution would be creating/copy the existing channel in ID with same properties and assign it into particular sender agreement.
But, the lock may be created again which potentailly stops all your file based interfaces. Hence i would suggest to use Timeout parameter avialable in file sender adapter which termiates FTP session as you defined, This should solve your issue permanently.
The FTP server do have thier own time out settings but if you don't defne any particulat time out in PI, the FTP server forcefully disconnects the FTP sessions which created locks in PI.
Hope this solves your issue.
PS: The same bahaviour would expected for all sender JDBC adapter as well -
Sharepoint 2013 - File Send option doesn't work
Hello,
I have an issue with File Send option in SP 2013, here is my scenario
Choose a file that i want to send
Click Send To - in Files (Ribbon)
Fill the destination path that i want to copy (test successfully)
Click 'OK' button
And here is my result, i always received the empty messagebox as below
Kind regards,
Binh DuongOk, I see you were not trying to mail it, you're trying to send it to another library
it could be the URL is too long. there is a 256 character limit, and maybe the URL that is getting generated exceeds the limit.
Here are a couple links about the limit
https://technet.microsoft.com/en-us/library/ff919564(v=office.14).aspx
https://support.microsoft.com/kb/894630/en-us?p=1&wa=wsignin1.0
Stacy Simpkins | MCSE SharePoint | www.sharepointpapa.com -
Error Archiving File in File Sender Adapter using AF_Modules/PayloadZipBean
Hi everybody.
I have to pick a zip file up from ftp server, unzip an convert the file in xml.
Im using this modules in file sender adapter:
AF_Modules/PayloadZipBean --> To unzip de file
AF_Modules/MessageTransformBean --> file to xml
The problem is when I try to archive de file. Im getting this error and I dont know why (This path exists /out/ProcesadosSinError/)
Could not archive file 'test.zip' as '/out/ProcesadosSinError/20100518-091029-155_test.zip' after processing: java.io.FileNotFoundException: /out/ProcesadosSinError/20100518-091029-155_test.zip (A file or directory in the path name does not exist.)
Could it be that is not possible to archive with AF_Modules/PayloadZipBean?
Thank u so muchHi Stefan.
Absolutely. This path exists. It's an absolute path from root. I can´t understand the error!!!!
Thanks!!!
Edited by: Christian Abad Chico on May 18, 2010 9:35 AM -
File sender with content conversion and ignoreRecordsetName
Him,
I have an scenario with a compressed file sender with content conversion.
In my sender cc i have:
1 AF_Modules/PayloadZipBean Local Enterprise Bean unzip
2 AF_Modules/MessageTransformBean Local Enterprise Bean transform
3 CallSapAdapter Local Enterprise Bean 2
In module configuration, I have also added:
xml.ignoreRecordsetName --> true
But RecordsetName is not removed from XML
Why?
thanks, in advance
CarmeHi,
No need to enter anything in module configuration. Just specify following Name-Value pair in the table provided on the Content Conversion tab of your file adapter.
Add a row with Name = ignoreRecordsetName and Value = true (Both case-sensitive)
For details, see [this link|http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm].
[some more here|http://www.riyaz.net/blog/index.php/2008/02/20/xipi-file-content-conversion-for-complex-structures/]
Regards,
Riyaz -
Is there a way to view the messages I sent along with files in Adobe Send?
Is there a way to view the messages I sent along with files in Adobe Send?
Too bad...I wish that feature was still there that was in SendNow...I also have to go and get the recipients email each time I send a file instead of Send remembering the email addresses I have sent to in the past.
Are any of the great features of SendNow going to be brought over into Send? Or are they just gone...I am a paying CC user...just curious what's going on at Adobe...Thanks for your very quick response though...I guess my message content is gone. -
I have Windows 7, Microsoft Outlook and PSE 13. I have used the "Share photos as embedded images" feature frequently, but today when I went to use it, it wasn't there, only the option to send email with files attached. How do I get back the ability to send emails with photos embedded. I like adding the frames and backgrounds and I think it's easier for recipients to look at the photos. Thanks for any suggestions of things to try.
GailI had a similar problem in that my wife's iphone 5 could not send pics with imessage. Had to set the settings to default to SMS or whatever. After laboring many hours on the web I coincidentally was on the phone with the internet people to question my internet speed. They changed the router channel, which is something that I am capable of doing myself. After that, the pics go over imessage. My own Iphone didn't have the problem. We are both latest IOS 7.0.6.
-
Cant do a file get from external server using file sender adapter with ftp
Hi all,
Up until now our company has only used the file sender adapter with ftp protocol to get a file from our XI server for processing and input the file into an integration process
I have a requirement to do an ftp file get from an external server
From our XI development server I can ftp directly to the external server and view the required directory using the command window via a DOS prompt (FTP open ...). So all firewall issues and communications are fine
Unfortunately I cannot currently pull files from the external server using the XI file adapter with ftp protocol from the XI development server AWB017
FTP Connection Parameters: External server name using port 21, Data Connection is Passive, No security, I supply a userid and password
Processing Parameters: Processing Mode is Archive (I tried test but this did not work either)
No messages appear in the RWB
Is there something else that I need to set up in order for the external ftp get to work via the XI file adapter?
Regards,
MikeThanks for your responses.
I have found the error messages in the File Adapter Monitor
Scenario 1
When I prefix the source directory with a forward slash, eg <b>/Folder/Subfolder</b> the error message is as follows
<b>EST: Error: Error connecting to ftp server 'ip address': FTPEx: /Folder/Subfolder: The system cannot find the path specified</b>
Scenario 2
When I DO NOT prefix the source directory with a forward slash, eg <b>Folder/Subfolder</b> a different error message is returned
<b>Error: Retrieving file 'FILENAME.XML' failed unexpectedly: FTPEx: Folder/Subfolder: The system cannot find the path specified</b>
At least in this scenario the adapter has been able to identify the file on the external FTP site but cannot retrieve it
Questions
I thought that the backslash prefix for the source directory was mandatory but I am receiving an error in each scenario
I receive the same error message whether the Processing Mode is 'Archive' or 'Test'
The logs on the external ftp server seem to indicate that I am simply connecting, sending username and password then quiting straight away. I am not issuing any commands that they can see
I thought that being a Sender adapter it would inherently execute a Pull or Get command
To recap, from our XI development server I can ftp directly to the external server and view the required directory using the command window via a DOS prompt (FTP open ...). So all firewall issues, communications, userid and password are fine
Has anyone experienced these issues?
Please advise on next course of action?
Regards,
Mike
Maybe you are looking for
-
Dunning - Interest and Fee per Letter
I have set up interest and fee per letter in the Dunning Terms and when I run the Dunning Wizard I see these amounts for each of the Business Partners Invoices. Where I am having an issue is getting these values to be displayed in the PLD, are these
-
Making images rotate randomly on a page.....
Hi, I am sorta new to DW, and I want to design a page that has either random images or text displayed without using flash. I kinda want this effect (it takes about 10 seconds to start) http://www.oen.org/ Is this done with Java Script? And any poi
-
Downloaded Itunes setup and it won't run
I downloaded the newest version of itunes. The setup wizard won't work when i try to install it. It doesn't say there is an error just absolutely nothing happens. I don't understand what is going on can someone help.
-
hi.... i dont know why and how this happened but it so happened that my thinkpad t 400 display became very very dim. i tried increasing the brightness but it was of no use.Also the various lights that are present on the display panel(wifi,bluetooth,
-
Ora-31000 not an XDB schema document error WHY???
I have registered a xmlschema as following FIRSTLY I create a procedure schemas as create or replace procedure schemas is begin declare doc varchar2(1000) := '<schema targetNamespace="http://localhost/po.xsd" xmlns:po="http://localhost/po.xsd" xmlns=