Payment Block field in invoice displays 'Free for payment 'even though ?

Hi,
We have set necessary upper tolerance limit for Price & Quantity variance in OMR6.This should block invoice for payment in case if this limit is crossed and payment block field in invoice should display "R Invoice verification".
In our case if material is having standard price then we are getting desired results in both the cases of Quantity variance and price variance . However in case of  material with moving average price it works fine in quantity variance but not for price variance(Here invoice gets blocked for payment but payment block field displays "free for payment").What can be probable reason for this?
Material ledger is activated in our case.
Thanks in advance,
Sanjog

Hi,
Currently, we are also facing the same problem.
The payment term are not getting populated after posting the invoice.
Could you please help to overcome the issue.
Thank you.
Warm Regards,
Kalyani

Similar Messages

  • Payment block code is not displayed when an alternative account is used

    Hi,
    we have defined an alternative account for vendors.
    When posting an invoice directly in FI, the payment block field (as well as the other payment terms fields) is not displayed in the Payment tab, if the alternative account code is selected. If the alternative account is cleared - in the same document - the payment terms fields are again displayed. Changing again the alternative account field (from blank to the relevant code) have the effect of payment terms masking.
    The same behavior happens during the modification of a document.
    The result is that - as the invoices are posted with the payment block field posted as default, it is not possible to release those documents.
    Can you give me any hint?
    Thanks,
    Massimo

    Hi
    It may be a problem with Posting Keys you are using.
    Go to OB41
    Double click on posting key used for payment or which ever your action is for
    Click on the Field status on the top
    Double click on Payment Transactions
    And select optional or required for the fields which you want to see
                              OR
    Go to TCode OBC4
    Select the required company code's Field status variant (whole line should be selected)
    Double click on Field status groups
    Double click on Reconciliation accounts (A/Payable or A/Receivable)
    Double click on Payment Transactions
    And select optional or required for the fields which you want to see
    Hope its useful.
    Mostly first solution should work for you
    Regards
    Jyotsna

  • AP invoice interface - payment block field question

    Hi,
    Peoplesoft is our main system for finance. We are using SAP for logistics applications. I am building a interface to send AP invoice details from SAP to peoplesoft on a daily basis. This interface needs to pick up only those invoice that are free for payment i.e. bseg-zlspr (payment block) field is blank. For example, if an invoice is in invoice verification process, it should not be sent. Till this point, it is easy to get the details of these invoices.
    Once the invoice verification is done, bseg-zlspr field will become blank and needs to be picked up by interface. But the issue is how to select these invoices. Since the interface will run daily, I can select for invoices that are created on that day or changed on that day. But the issue, when the value of bseg-zlspr field is changed from blocked to free for payment, none of the date field value changes on either bkpf or bseg tables.
    Any ideas how to handle this???

    hi,
    use change document analysis like tcode FB04
    -> try fm CHANGEDOCUMENT_READ_HEADERS
    A.
    Message was edited by:
            Andreas Mann

  • Why there is chanage "Free for payment" to "Invoice verification" aftr MIRO

    Hi Friends,
    Please suggest me why there is a change from "FREE FOR PAYMENT" to " INVOICE VERIFICATION" after posting of MIRO.
    My client is asking this doubt. However i have checked by posting MIRO but failed to find out.
    Please provide a detailed clarification for this doubt.
    Your quice reply in this issue would be highly appreciated.
    Thanks & Regards,
    Naveen Kumar.

    Hi Friends,
    Please find the below question from my client.
    "While booking Invoice with PO by using T.Code MIRO, i set status payment block is "Free for Payment" after positng, it automatically changes from "Free for Payment" to "Invoice Verification" so payment team can not run payment for the item.
    Please help me to resolve it."
    For your information i checked Vendor Master in XK03. status of payment is like Free for payment.
    Please suggsest me correct answer to clarify my client's doubt
    Looking forward for your kind help
    Thanks & Regards,
    Naveen Kumar.

  • Need to change my parked invoice status to"Free for payment"

    I want to set the status to "Free for payment" for parked invoice documents after posting(using MIR4 or else),so that help me how .Is there any function module available for that to set the ststus or else how??Please let me know very urget.
    thanks
    Reddy Gundala

    blocked invoice can be released for payment by MRBR.
    check the customization.-check u might have activated the Quality , if the GR stock is in quality, un less it is released to un ristricted, the MIRO status cant be set free for payment.

  • MIR5 Payment block field

    Hi experts,
    I am using TCode MIR5 with a standard layout on an ECC6.0 system.
    The field 'Payment Block' is showing as null for the range of invoice parties that I have selected to display.
    When I drilldown into the invoice the field 'Pmnt Block' from the 'Payment' tab shows 'R invoice verification'.
    And in the RBKP table this field is empty.
    Do you know why this field is not well filled in the RBKP table ?
    Thanks a lot for your answer.
    Best regards
    Fabrice Brun

    Hello,
    I can see some of my invoice documents which are blocked but not all of them.
    What I want to do is select in a program all the blocked invoice documents (which I can see in the table RBKP_BLOCKED) but whith the good payment payment block field I can see in the MIR4 transaction in the 'Payment' tab.
    Do you know how can I do.
    Thanks a lot for your answer ?
    Best regards.
    Fabrice Brun

  • Payment Block Field Should be Grayed

    _*Scenario:*_
                 If one vendor line item is blocked from the MM side, due to there own conditions, that item should not released for payment until & unless the confirmation from the same side and remove the block thru MRBR.
    Issue:
                 Here, the issue is, even though it is blocked from MM, thru FB02 from FI the user can remove the block indicator and clear the item.
    Requirement of the Client:
                As, per the above issue the users (MM) don’t want the FI user, having the authority or access to change & remove the block indicator for such line items which have been blocked from MM, and unless they remove the same thru MRBR.
    Available Options:
    1.     Maintaining the User Authorizations as per the responsibilities. That means providing the FB02 authorization to higher officials only.
    2.     In the FB02, Graying out the Payment Block Field.
       So, Can it be possible to Gray out the Payment Block Field in the FB02 transaction…..
    Please give me the suggestions in this Regard…
    Thanks
    Talluri.

    Hi,
    You have to change the configuration settings for the co. code in IMG. For that follow the following steps:
    Go to IMG->Financial accounting->Account Receivable & Account Payable->Vendor Accounts->Master records->Preparations for creating Vendor Master records->Define Screenlayout per Company Code(Vendors)->Select the Co. Code row->Click Edit Field Status(on top of the screen)->Select Group, Payment transactions->Check the Payment block row field status from Req entry/Optional entry to Display entry.
    Hope it answers your question.
    Please reward points if you find this to be helpful.
    Thanks,
    Prithwiraj.

  • Payment Block in an Invoice

    Hi Gurus,
    Can we have multiple payment blocks assigned to an invoice, so than payment cannot be made until all the blocks are cleared???
    Please revert asap.
    Thank YOu

    Hello,
    in a FI document there is only one payment block field.
    BR Tarik
    prhps. look to this SAP help:
    Payment Block Key
    Use
    Specifies why a document is blocked for payment.
    The following payment blocks exist:
    Manual payment block
    If you manually select a payment block from the list field to block an invoice for payment, the payment block field in the header of the invoice document is marked with the appropriate indicator.
    Blocked due to differences
    If invoices are to be blocked automatically due to differences in the invoice items, the system enters the payment block R in the vendor line of the Accounting document. The field in the header of the invoice document remains empty.
    Random payment block
    Invoices that do not show any other blocking reason, can be blocked in accordance with the random principle. In Customizing for the Logistics invoice verification, you can set the probability for the block. The indicator for the logistical payment block is entered in the header of the invoice document.
    Dependencies
    If you have set a manual payment block, and an invoice is blocked automatically due to differences in the invoice items, the system enters the manual payment block in the vendor line of the Accounting document.

  • Payment block field disabled in FB03

    Hi Friends,
    in vendor ,payment block field in Fb03 transaction code is diabled in live and when i check the same in development it is enabled after i click on edit but the same thing is not happening in live system.
    could any one please tell how to handle this situation. where do i need to configure to make it enable.
    thanks & regards,
    kat.

    Hi,
    Check whether the field has been enabled for editing in the document changerules. The path for the same is -
    SPRO >> Financial Accounting >> Document >> Rules for Changing Documents >> Document Change Rules, line Item.
    Additionally also check the config settings for payment block whether manual payment block is activated. The path to check this is -
    SPRO >> Financial Accounting >> Accounts Receivable and Payable >> Business Transaction >> outgoing payments >> outgoing payments global settings >> payment block reasons >> define payment block reasons.
    Thanks and Regards,
    Anit

  • Payment Block removed or allow to make the payment after the due date

    Hi,
    Regarding Payment block, we have created one payment term with block indicator and assigned to some vendors. So each posting system will generate the entry with payment block, once the document crossed the due date (assume that 30days) system wants to allow to make the payment to the vendor without deleting or removing  the payment block. Is it possible.
    govind

    Hello,
    For this change, you need to develop a program and need to identify the age of 30 days invoices and remove payment block for those invoices. So 30 days aged invoices can clear.
    Logic: go to BSIK and find out ZFBDT of the document and deactivate the ZLSPR (Payment block).
    Or
    try to find out any functional module or user exit is available while clearing invoices. if available maintain the above logic.
    Regards,
    venkat

  • IT 9 error "Payment method cheque in IN not allowed for payment to Persons"

    Dear Experts
    I am unable to give 'C' (Cheque) in Payment Method field in IT0009 (Bank Detail)
    It might be B'cos of availability of two options only
    ie
    By cash or by (ii) Transfer Not by Cheque ie 'C'.
    When I give 'C' Value I get error message
    "Payment method cheque in IN not allowed for payment to Persons"
    Kindly suggest how to input 'C'
    Rgds
    Kamal Singh

    Dear Dilek
    I could find out the Ans by the Procedure you told me .
    I could give value 'C' (Cheque) in Payment Method
    Thanx
    Rgds
    Kamal Singh

  • Are the iPhone 6's on display in the store even though they aren't available for sale yet?

    Are the iPhone 6's on display in the store even though they aren't available for sale yet?

    Almost certainly not, but you can always call your local store and ask.

  • N73 displays answer phone icon even though i have ...

    N73 displays answer phone icon even though i have no message. Any ideas?
    Its not who i am underneath. But what i do that defines me.
    You are here for a reason Superman.
    "Come to me son of Jor-EL. KNEEL BEFORE ZOD"

    Thanks alot mate. Sorted the problem.
    Cheers
    Its not who i am underneath. But what i do that defines me.
    You are here for a reason Superman.
    "Come to me son of Jor-EL. KNEEL BEFORE ZOD"

  • Fld defaulting to specific sales org for user even though Parameter not set

    Hello,
               I have a problem, for a specific user, where the sales org field is defaulting to a specific value even though his parmeter ID is not set for VKO. For information, the sales org value no longer exists (invalid). More over, the problem exists only for a particular transaction, MM41, MM42 and MM43. When he tried VA01 the prolem of the sales org value defaulting does not happen.
    I have tried MM41, 42 and 43 with my user ID and it works properly. We use CUA but parameters are locally maintained in each child systems as this is logical. i reset the buffers (/$sync) just to be sure (as this is not a live system) but this does not help.
    Any ideas?
    Regards,
    Prashant

    Hi Prashanth,
    at our end we do not have a  retail-specific maintenance function, but i guess the problem arises when the user has entered the sales organization and saved it as " default areas of validity", try using a blank entry and then click on the tab for default areas of validity - it "could" solve the problem

  • My iPad shows using 4.1GB of storage for mail, even though I have delete all content in the folders. How do I get this storage back?

    My iPad shows using 4.1GB of storage for mail, even though I have deleted all content in the folders. How do I get this storage back?

    My iPad shows using 4.1GB of storage for mail, even though I have deleted all content in the folders. How do I get this storage back?

Maybe you are looking for