PayPal Drop Down List Assistance
I am building a store for a friend's website and need to
change an image dynamically based on two PayPal drop down lists.
For example, a user that wishes to purchase a shirt may choose
"green" as a color, and then "horse" as a design. I can make all of
the images with the different color-design combinations, my
question is how to request that a particular image loads.
Anyone know of a tutorial or sample files I can look at? Any
help is appreciated.
Hello,
Are you using a shopping cart application to submit orders to
paypal or are
you simply using paypal's "add to cart" and "buy now"
buttons?
If you are using an application what is the server side
language?
Thanks,
Tim
"adam@blueapplestudio" <[email protected]>
wrote in message
news:fng4a4$vv$[email protected]..
>I am building a store for a friend's website and need to
change an image
> dynamically based on two PayPal drop down lists. For
example, a user that
> wishes to purchase a shirt may choose "green" as a
color, and then "horse"
> as a
> design. I can make all of the images with the different
color-design
> combinations, my question is how to request that a
particular image loads.
>
> Anyone know of a tutorial or sample files I can look at?
Any help is
> appreciated.
>
Similar Messages
-
Hi
Last night I tried to install ios 6.1.2. The install failed. I tried again and this time it recommended restoring the phone - I agreed and it worked, but after the restore was completed, I could not get out of the set-up assistant screens on the phone. It kept saying either connect to Itunes, or connected to Itunes - there was no conclusion of the set-up process.
So again I chose to restore the phone - this time I got through the process and asked it to restore my last back up. It did so, but it turns out the back-up is empty. Looking at the time of the back-up, I think what happened is the phone synced while it was stuck in the set-up assistant, and the old backup with all my data was overwritten with a new empty back up.
If I use windows explorer I can see a back-up set from earlier in the evening that should contain all my data (6pm) but when I look in iTunes that backup set is not available for selection in the "restore back-up" drop down list. Perhaps its only a partially completed backup, but at 1.55gb it sure contains a lot of valuable data. How can I make iTunes see or use the 6pm backup set?yes - sadly I think that's what happened. As the phone was connected, it was syncing and backing up automatically while I tried to complete the set-up process. So an empty back-up overwrote the full one. But the full back up is still there in the application data files - it must have done a back-up automatically before it restored the phone. So why can't I see it and use it in iTunes? Very frustrating!
-
The portlet name is not displayed in the portlet drop down list ?
Hi,
I use Sun Java System Portal Server 6 2005Q4 for windows 2000 server , use the following command to deployo portlet,
I am not sure if I successfully deploy the portlet?
pdeploy deploy -u amAdmin -w amadmin -p amadmin -d "cn=amldapuser,ou=DSAME Users,dc=icheng,dc=com" C:\Sun\PortalServer\tmp\portlet\portletsamples.war
The message I got after execute the pdeploy command is =>
Deploys the portlet war file and inserts the provider into display profile..
OPTIONS
--help Help message (false)
-u --runasdn UID Bind DN (none)
-w --password Password (none)
-p --wc_password Password for WebContainer's Admin (none)
-i --instance WebContainer's Instance into which the war file is to be deploye
d (*)
-d --dn LDAP DN of the target node (*)
-g --global Global display profile (false)
-r --rolesfile File containing the DSAME and portlet role mapping (*)
-f --userinfofile File containing the user info mapping (*)
-v --verbose Generate debug messages (false)
-V --version Generate version information (false)
-l --locale Locale information (en_US)
OPERAND
Specifies a path to the war location.
Deploying to IWS
Is this mean that successfully deploy the portlet ?
After I deploy the portlet, I login to Access Manager, select the "service" from view, click the portal desktop,
click "Manage Channels and Containers", click the "New Portlet Channel...", then click the portlet drop down list,
the portlet name is not displayed in the portlet list.
How can I make the portlet name displayed in the portlet drop down list ?
Can someone help me ?
Thanks!Hi
According to your description, since this is SQL Server forum, as Olaf Helper’s post, could you get the correct result if you execute the following query in SQL Server Manager Studio (SSMS)?
select UserName from aspnet_Users where UserId in(select FreindId from myFreinds where UserId in(select UserId from aspnet_Users where UserName = '<your typed name>'))
If you cannot get the correct result in SSMS, I recommend to check the Transact-SQL statement. Apart from the error message, we also need to know the table structure, data, join relationships between tables for further analysis.
However if there is no problem in SQL Server query, it will be an issue that regards ASP.NET and website deployment. I suggest you to post the question in the ASP.NET forums at
http://forums.asp.net/ . It is appropriate and more experts will assist you.
In addition, there is detail about listbox control in asp.net. You can review the following links:
How to Bind/Load/Fill ListBox with Sql Server Database in asp.net:http://www.webcodeexpert.com/2013/07/how-to-bindloadfill-listbox-with-sql.html#.U5f75_6KCM9
How to get multiple selected value in ListBox control - ASP.NET using C#:
http://www.dotnetfox.com/articles/how-to-get-multiple-selected-value-in-listbox-control-Asp-Net-using-C-Sharp-1047.aspx
Thanks
Lydia Zhang -
Unable to see view in drop down list at end of bread crumb
Hello,
I've a saved view in a List in SharePoint 2010
the View used to display in the drop down list at the end of the breadcrumb but is no longer displayed. It disapeared one day after editing the page layout of the view)
The view still exists and is accessible from a saved hyperlink.
the view contains multiple web parts and three separate lists in the same site, filter from a forth (or master list) all in the same site.
how can I get the view to re-appear in the drop down list at the end of the bread crumb?Yes, meant to pop that in the original post, Had a look in the per-location element. Nothing there either! It's disappeared from the site, but as I say a legacy Hyperlink stored in favourites
still brings it out - I can edit the page when I get there etc...
Apreciate you assistance BTW :-) -
Unable to clear the drop down list of junk login ID's - I have a Mac OSX
When I go to sign into my yahoo ID, and I begin to type my e-mail account, a drop down list of junk log in ID's pop up. These are ID which I have entered my mistake in the pass. One of which is my password. I am unable to clear the drop down list of this junk log in ID's. I ask Yahoo how to do it and I was told that this problem is specific of my web browser. I need your help to clear that junk log in ID's. I have a Mac OSX, Version 10/4. Would you be able to explain simple what to do. This problem is annoying as every time I sign in that drop down list appear.
I would appreciate your assistance.
Sincerely,
Socorro Berygood afternoon Limnos i think i didnt give the right info I didnt download well in a way i did i bought a copy of microsoft excel for mac 2004 i loaded on to my mac then i went and down loaded some software that said i needed to have excel you see my mac is osx 10.4,11 power pc G4 and that is were i had the problem now the excell loaded allright but the the other programs did not the pop ups say it is not scriptable or can not read dictionary if you can help m,e iam not great with computers but i along
-
Spry region drop-down list problems in IE
Can someone please help me determine the reason that IE does not display the correct item in a spry region drop-down list when first opening the site. You can see the problem at http://www.minursemap.org/agedistnurse.html. The initial item in the drop-down list should be Alcona with the corresponding graphic displayed in the detail region. In Firefox, this works correctly. When first opening the page in IE, the graphic is Alcona, but the drop-down list displays Wexford (the last item in the list). From then on, all of the links work correctly.
The code for the two regions is below. Thanks in advance for assisting someone new to spry.
<div id="ctyname">
<div spry:region="dsChartNurse">
<select name="name" spry:repeatchildren="dsChartNurse" onchange="dsChartNurse.setCurrentRow(this.value)">
<option value="{ds_RowID}">{name}</option>
</select>
</div> <!--spry:region close -->
</div><!--ctyname close -->
<div id="image">
<div spry:detailregion="dsChartNurse">
<div align="center" style="padding-bottom:15px"><img src="{dataimage}" width="405" height="202" />
</div><!--un-named div close -->
</div><!-- spry:detailregion close -->
</div><!--image close -->Try the following code to replace yours:
<select name="name" spry:repeatchildren="dsChartNurse" onchange="dsChartNurse.setCurrentRow(this.value)">
<option spry:if="{dsChartNurse::ds_RowID}=={dsChartNurse::ds_CurrentRowID}" spry:selected="selected" value="{ds_RowID}">{name}</option>
<option spry:if="{dsChartNurse::ds_RowID}!={dsChartNurse::ds_CurrentRowID}" value="{ds_RowID}">{name}</option>
</select>
I hope this helps.
Ben -
Filtering in excel - not all options display in drop down list
I have found an issue with the filter drop-down list in Excel 2010. I have now been upgraded (by my employee) to Excel 2013 and same problem still exists.
Problem: I highlight the row containing the column headings; then click on filter (available via the Home tab); then click on the down arrow in the column of interest (in this case "Council Names" column); the drop-down window appears but not all
council names are displayed in the selection list, even though those council names are still in the list. I am aware of the 10,000 option limit with the selection list, but my spread sheet has well under 10,000 rows (unless there is something hidden that I
do not know about).
I have found work-arounds for the problem by searching google for answers to similar problems. I have also spoken to my employee's IT HelpDesk. I will explain the work-arounds I have found below. However, my main concerns now are:
(1) What is the cause of the problem? Is there are better fix that addresses the cause, rather than having to use work-arounds?
(2) Is the issue an indication that the spread sheet has been corrupted in some way? - I need assurance that this is not an indication that the spread sheet is unstable and such problems could multiply or already be existing. (The reason I ask
this is that I had an earlier version of the same spread sheet where the problem did not occur, but it appeared in a later copy - could the copying of the sheet/workbook have caused the problem?)
Workarounds found:
(1) Select the entire sheet, then select the filter button in Home tab
(2) select all the columns manually (click in top left cell and drag down until all data selected), then select filter button
(3) Ensure all rows in the column of interest are filled in, then select filter button
I would really appreciate any answers/assistance.Hi Jan,
Thank you very much! Yes you are right - I have looked at the Current Region and the Council Names within that region match those in the filter list. The Current Region does not contain the entire sheet.
[By the way - there were some errors in my original post: employee should be employer and in my description of the problem the following should read
"...even though those council names are still in the spread sheet". I assume that this would not change your response?]
Further questions
(1) It is odd, though, that an earlier version of the same spread sheet had a complete list of council names (the current range on this sheet contains all of the required rows of the sheet). How did the current region change between versions (I did not knowingly
do it)?
(2) Does the above mean that the file, workbook or spread sheet is damaged/corrupted in some way? If yes, can this be corrected and how?
(3) In addition to (2) above - what is the safest way to copy an excel workbook to minimise risk/avoid future corruption? [I have been copying and keeping earlier versions, partly for testing reasons, but also as a safety measure for the project as
we are making changes all the time and may decide we wish to go back to the previous version(s)].
Regards and thanks again,
Bea Rogers. -
Following the instructions for reporting an issue with a purchase problem, when selecting "report a probelm", I am not provided with a drop down list, I am redirected to the help page instead.
Is there any other way to report an issue where the app owner has taken the funds twice for the same product at literally the same time?To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
DROP DOWN LISTS / PICK LISTS
Hi
I am faced with a slight problem. I need to create a drop down
list / pick list giving the user drill down options within the
same drop down. Eg...
Residual Problems
Breathing
Respiratory Distress
Other possible qualifications
Lung Infection
Other possible qualifications
Physical
Broken bone
type of bone
Etc.. etc..
Is this at all possible in Portal.
Your assistance/input would be greatly appreciated.
Regards
LisaJust create a LOV (List of Values).
Hi
I am faced with a slight problem. I need to create a drop down
list / pick list giving the user drill down options within the
same drop down. Eg...
Residual Problems
Breathing
Respiratory Distress
Other possible qualifications
Lung Infection
Other possible qualifications
Physical
Broken bone
type of bone
Etc.. etc..
Is this at all possible in Portal.
Your assistance/input would be greatly appreciated.
Regards
Lisa -
Firefox drop-down lists make X server crash
Hey guys,
I am requesting for help because I am having a really annoying bug I can't find assistance for online.
When drop-down lists come up in firefox (such as the autocomplete when typing something on the search box), every now and then, it makes the X server crash. It is really not happening every time but it is enough to make the X server crash some at least once a day, often more. This also happens when such drop-down lists come up in Zotero, and add-on I am using.
It seems somewhat similar to what has been reported here: http://bbs.archlinux.org/viewtopic.php?id=96137
I am not quite sure which logs should I be looking at nor where should I report this. Could someone help me figuring this out?
Thanks ,
MichaelI am also having the drop down problem on my macbook, it's getting really annoying. On top of that, twice today (i just got the macbook three days ago) my keyboard will just stop working- i cannot type in firefox nor in finder or word.
-
How do I use one drop down list to refresh the list in another drop down?
I am using a drop down list full of years (i.e. 2008, 2009..etc). When I make my selection from this drop down list (say for instance I select 2009) I want it to update the available data in the second drop down list. I have the query statement set up within the JSP page but it needs to be a dynamic SQL statement based off the value I selected in the first drop down.
String sql = "SELECT GameId, GameDescription FROM Games WHERE Year = " + year;
The variable "year" is the value I need to figure out how to assign. Now this variable is a Java variable (attribute) and Im unsure how to get the value from the previous drop down and assign it to that. Basically I need the JavaScript value from the first drop down assigned to the Java attribute "year".
Anyone able to help me with this???
Thanks,
JedHere are my two drop down lists. As you can see I build the second list dynamically based off the value of the year. I want to be able to assign my year to the value I select in this first drop down. How do I do that?? I only want to show games for the year I select. I currently have the year hardcoded to "2009" as you see below. How can i change that to be assigned to the JavaScript value i extract from the first select box?
<select name="season">
<option value='2009' selected>2009</option>
<option value='2008'>2008</option>
</select>
<select name="gameselect">
<%
try
String year = "2009";
String connectionURL = "jdbc:mysql://localhost:3306/ElmwoodExpos";
Class.forName("com.mysql.jdbc.Driver");
Connection con = DriverManager.getConnection(connectionURL, "root", "thejedster");
String sql = "SELECT GameId, GameDescription FROM Games WHERE Year = " + year;
Statement s = con.createStatement();
s.executeQuery(sql);
ResultSet rs = s.getResultSet();
while(rs.next())
%>
<option value="1"><% out.print(rs.getString("GameDescription"));%></option>
<%
catch(Exception e)
%>
</select>
Thanks,
Jed -
Using a variable/drop down list in header of planning layout
Dear all,
I have created a simple BPS application for purely GL planning (No CO related objects like cost centre involved). I have the following characteristics in the header of the manuel planning layout.
Business area
Chart of accounts
Company code
Currency
Currency Type
Fiscal year
Fiscal Year Variant
Fiscal year/period
Value type
Version
I have created variables for Business area, Fiscal Year, Fiscal Year Period, Posting Period and Version. The client wants either a variable or a drop down list for these characteristics in the header in the web application. When I assign a variable and put the characteristic in header, I get the error message in the web application saying header characteristic can only have a fixed value. Can someone tell me if it is possible and if so than how? I'll be very grateful for any inputs. Thanks a lot.
Regards,
SumitHi,
When you create a variable, assign some values to the variable. These then become available in the drop down box. Ths first time a Web interface is called, these variable values are initial.As a result, u get the error messages. Select the variable values and then the error message should go away.
Thanks,
-NS -
Unable to capture data from drop down list in custom added field in migo tcode at item level
Hi guys,
need bit help in resolving query related to custom added field in Tcode migo.
i have added a field in migo at item level ,in this i have used drop down list
to get data but unable to capture data from drop down list.gown through
many blogs in scn but unable to resolve.
Please help me out in this.
Thanks,
Umakant.Hi,
U can use following code to fill the list box
write this code in PBO
In layout editor please select listbox in dropdown attribute of input field and put some fctcode attribute
TYPE-POOLS vrm.
DATA values TYPE vrm_values WITH HEADER LINE.
TABLES: <ur custom Database table>.
clear values, values[].
SELECT * FROM <ur custom Database table>.
values-text = <TABLE FIELD TO DISPLAY IN DROPDOWN> .
values-key = <TABLE KEY FIELD TO DISPLAY IN DROPDOWN>.
APPEND values.
ENDSELECT.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
id = '<SCREEN INPUT FIELD NAME>'
values = values[]
EXCEPTIONS
id_illegal_name = 1
OTHERS = 2.
Also please define the following before accessing the listbox value
data: <listbox input field name> type <table field name>,
<inputfield name where text to display> type string in top include
In PAI, select the text from the table into <inputfield name where text to display> depending on value selected which will be called when enter key is pressed or any vale is selected -
Populate drop-down list from multiple text fields.
Just to begin, I am brand new to this application and brand new to coding in general. Anyways, this is what I am trying to accomplish. I need to populate a drop-down list from multiple text fields. I am able to populate one item using this in the calculate event:
TextField1.rawValue
After I type text in TextField1 and hit enter, it displays the text in the drop-down list. I need to do this but with more than just one text field to populate more options for the drop-down list. I will also need to do something similar with populating a drop-down list from selections made in multiple other drop-down lists.
Thanks for any help you can give me.Thank you for your suggestion Geo Kaiser. With that, I was able to populate my drop-down lists, but now when I select an option from the drop-down list, the selection dissapears. The selection will appear briefly in the box but then dissapears although my drop-down list options remain there. Here is the code I am using for my text field to drop-down list:
DropDownList1.clearItems()
DropDownList1.addItem(TextField1)
DropDownList1.addItem(TextField2)
And here is my code for my drop-down list to populate another drop-down list:
DropDownList3.clearItems()
DropDownList3.addItem(DropDownList1)
DropDownList3.additem(DropDownList2)
Thanks again for your help. By the way, I am using Adobe Designer 7.0. -
Drop-down List not function in preview mode.
Hi all,
LiveCycle 8.2.1.4029
I have created a drop-down list and populated it with a text
However when I preview the form, the drop-down is displayed without the dropdown arrow and the options (text) are not displayed.
The drop-down list is the only object on the form.
If I load a form or xpd of a form created prior today the drop-down list displays and functions as normal.
Any ideas.
Thanks
WowRoninHi,
I uninstalled and reinstalled Acrobat and then patched to 9.4 and everything is back to normal.
Go figure!!
Thanks for responding.
WowRonin
Maybe you are looking for
-
Adding Data file to existing primary file group with 1 data file
Currently our databases are configured to only have 1 data file and 1 log file. I am looking at adding a 2nd data file to the primary group, which will be on a separate lun. Will we benefit from adding the 2nd data file (same size as 1st data file a
-
Cad software started having some issues so I uninstalled it and when I go to re-install, I can't get past the "select folder for installation" page. I can't browse to any other than the default applications location and at the bottom of the screen i
-
Since installing Yosemite, I must force computer to shut down.
Since I installed Yosemite , It will not shut down or restart normally, I must force a shut down. Than it takes forever to start up. Anyone having that problem?
-
Https redirect for SGD 4.4
Hello, I am attempting to set up the apache webserver to redirect http traffic to https. I originally was able to achieve this in SGD 4.3 by using the RewriteEngine in the httpd.conf file to simply rewrite all requests to https, but this appears to n
-
How do you load from iPhoto into PS?, How do you load from iPhoto into PS?
Hi, there: I tried to load a photo from iPhoto into PS and can't make it work. Actually, I just uploaded all my snaps from my iPhone and wanted to use one to go through the tutorials, and the computer decided I wanted to go to iPhoto. How do I get a