Pcscfg.cfg configuration not standardized !! ......RTFM ???!!!
Hi,
I am using Oracle 8i on RedHat 6.1, and facing a hell lot of problems. I need to compile a Pro*C program an the damn thing keeps throwing me out !!. It keeps giving a very irritating message, as follows:
INTERNAL ERROR : Failed assertion [PGE 90105]
This shows an error in /usr/include/stdio.h which apparently points to the last line of the file, i.e the "endif" statement.
This is totally absurd and crazy !!
When I was going to the previous discussions at OTN, I came across a lot of mails, complaining of similar problems. Unfortunately many of them went unanswered !!
Few of them gave various versions of the "pcscfg.cfg" file and I have tried them all. None of them work !!
One person also said RTFM. Well, the documentation that comes with the 8i CD talks about certain entries in the "pcscfg.cfg" file which I think is utter bullshit cause most of the paths declared don't even exist. I have installed Oracle about 5 times and checked for this !!
But the surprising thing is that the same chaps give a different version of the same file at their website !! And that too does not solve the problem.
Can't they give a standard configuration file ?!!
Well, if some one has come up with a working version of the "pcscfg.cfg" file, please, please send it over to the following email id
[email protected] OR
[email protected]
Thanks in Advance,
Sandeep Sundaram.
null
Duplicate post:
proc -v =====>Memory fault(coredump)
Similar Messages
-
How to configure a standard SmartForm to be sent by e-mail in PDF format
How to configure a standard SmartForm to be sent by e-mail in PDF format
We need to use standard SAP configuration to send e-mails (output type Medium = 5 External Send).
Currently we were able to send the forms on OTF format, not PDF.
Does anyone know how to automatically make the conversion from OTC to PDF without having to code anything on ABAP?Hello Luiz,
actually there are only a few steps to do:
Just call transaction SCOT and doubleclick your SMTP node. Click on the "set"-Button behind the supported address type "internet". Choose "PDF" as output format for SAPforms.
By the way. You can also generate a PDF-File from a Spool with report RSTXPDFT4.
I hope this will help you.
Bye
Frank -
I have built a EAR file (using ANT build.xml from eclipse) and deploy it to WebLogic server, when I test the web service with a Test Client, I will receive the exception:
java.lang.NoClassDefFoundError: org/hibernate/cfg/Configuration
Anything wrong with my build.xml file below? Why I get this exception?
<?xml version="1.0" encoding="UTF-8"?>
<project name="MyWebServices" default="all">
<!-- set global properties for this build -->
<property name="wls.username" value="weblogic" />
<property name="wls.password" value="abcd1234" />
<property name="wls.hostname" value="localhost" />
<property name="wls.port" value="7001" />
<property name="wls.server.name" value="AdminServer" />
<property name="ear.deployed.name" value="MyWebServicesEar" />
<property name="example-output" value="output" />
<property name="ear-dir" value="${example-output}/MyWebServicesEar" />
<property name="clientclass-dir" value="${example-output}/clientclasses" />
<path id="client.class.path">
<pathelement path="${clientclass-dir}" />
<pathelement path="${java.class.path}" />
</path>
<taskdef name="jwsc" classname="weblogic.wsee.tools.anttasks.JwscTask" />
<taskdef name="clientgen" classname="weblogic.wsee.tools.anttasks.ClientGenTask" />
<taskdef name="wldeploy" classname="weblogic.ant.taskdefs.management.WLDeploy" />
<target name="build-service">
<jwsc srcdir="src" destdir="${ear-dir}">
<classpath>
<pathelement path="${java.class.path}" />
<pathelement path="WebContent/WEB-INF/lib"/>
</classpath>
<module contextPath="MyWebServices" name="MyWebServicesModule">
<jws file="/hk/com/my/webservices/servicefacade/CustomerWS.java" type="JAXWS" />
<jws file="/hk/com/my/webservices/servicefacade/LoginWS.java" type="JAXWS" />
<jws file="/hk/com/my/webservices/servicefacade/PaymentWS.java" type="JAXWS" />
<!-- <jws file="/hk/com/my/webservices/servicefacade/RedemptionWS.java" type="JAXWS" /> -->
</module>
</jwsc>
</target>
<target name="deploy">
<wldeploy action="deploy" name="${ear.deployed.name}" source="${ear-dir}" user="${wls.username}" password="${wls.password}" verbose="true" adminurl="t3://${wls.hostname}:${wls.port}" targets="${wls.server.name}" />
</target>
<target name="undeploy">
<wldeploy action="undeploy" name="${ear.deployed.name}" failonerror="false" user="${wls.username}" password="${wls.password}" verbose="true" adminurl="t3://${wls.hostname}:${wls.port}" targets="${wls.server.name}" />
</target>
<target name="all" depends="clean,build-service,deploy" />
<target name="clean" depends="undeploy">
<delete dir="${example-output}" />
</target>
<target name="run">
<java classname="hk.com.my.webservices.servicefacade.client.Main" fork="true" failonerror="true">
<classpath refid="client.class.path" />
<arg line="http://${wls.hostname}:${wls.port}/MyServices" />
</java>
</target>
</project>The problem was because I did not include my web-inf into the ear in my build.xml, i added it using the zipfileset tag and it worked like a charm:
<target name="build-service">
<jwsc srcdir="src" destdir="${ear-dir}" debug="on">
<!-- "contextPath" is like a folder to contain the Web Services, "name" is the name of the WAR file -->
<module contextPath="MyWebServices" name="MyWebServicesModule">
<jws file="/my/webservices/servicefacade/CustomerWS.java" type="JAXWS" />
<jws file="/my/webservices/servicefacade/LoginWS.java" type="JAXWS" />
<!-- include and copy the required files to the ear directory -->
<zipfileset dir="WebContent/WEB-INF/lib" prefix="WEB-INF/lib">
<include name="*.jar"/>
</zipfileset>
</module>
</jwsc>
</target> -
Configuration not dispplayed on the screen
Hi,
I have created two different configurations for a view.
one as default and the other specifying an object type.
have done the following coding in the DO_CONFIG_DETERMINATION method of the view implementation class.
data: lv_object_type TYPE bsp_dlc_object_type VALUE 'ZFOC_SR',
lv_subtype TYPE bsp_dlc_object_sub_type VALUE '<DEFAULT>',
l_user TYPE uname.
lv_config_key TYPE .
IF l_user eq 'ZCPSR'.
lv_object_type = 'ZFOC_SR'.
me->set_config_keys( iv_object_type = lv_object_type
iv_object_sub_type = lv_subtype
iv_propagate_2_children = abap_true ).
ENDIF.
CALL METHOD SUPER->DO_CONFIG_DETERMINATION
EXPORTING
iv_first_time = ABAP_true
but still the default configuration is being loaded.
pls correct me, if i have missed some specification in the above code.Thanks Sumit but, still the same result.
if anything more to be done, pls specify.
Have specified the object type and config key in spro.
Have tried deleting the default configuration and retaining only the one i have created.
on debugging, i got to know that the system is searching for standard config after the method
DO_CONFIG_DETERMINATION.
since i have deleted the default config. i got the following error:
CX_BSP_DLC_CONFIG_NOT_FOUND - Configuration not found
CL_BSP_DLC_XML_STORAGE2=>GET_CONFIG_DATA
Q1. why the system is checking for standard config, after getting the confing details from
DO_CONFIG_DETERMINATION
method.
Do we need to specify any other parameter, to restrict this. -
The OVERFLOWLOGPATH cfg does not effect
Hello,
Everytime when DB2 was restating, the following messages appeared in db2diag.log.
(This is not full diag messages, but like this.)
unable to use OVERFLOWLOGPATH DB cfg parameter
/db2/<SID>/log_retrieve/NODE0000
DB2 will continue to use the current path
sqlpgValidateOverflowLogPath
string 140bytes
Error -214643908 where validating overflowLogpath /db2/<SID>/log_retrieve/NODE0000/
The OVERFLOWLOGPATH cfg does not effect
There is no definition of OVERFLOWLOGPATH in DB CFG.
What is the reason for these error messages?
Any comment is greatly appreciated.
Best regards.
Takae MomoseHello,
yes. That is possible:
I tested it on my system:
milchkuh:db2hjm 57> mkdir /db2/HJM/log_retrieve
milchkuh:db2hjm 58> mkdir /db2/HJM/log_retrieve/NODE0000
milchkuh:db2hjm 59> db2 connect
Database Connection Information
Database server = DB2/LINUXX8664 9.7.0
SQL authorization ID = DB2HJM
Local database alias = HJM
milchkuh:db2hjm 60> db2 update db cfg for hjm using overflowlogpath /db2/HJM/log_retrieve/NODE0000
DB20000I The UPDATE DATABASE CONFIGURATION command completed successfully.
milchkuh:db2hjm 61> db2 get db cfg for hjm show detail | grep -i overflow
Overflow log path (OVERFLOWLOGPATH) = /db2/HJM/log_retrieve/NODE0000/NODE0000/ /db2/HJM/log_retrieve/NODE0000/NODE0000/
milchkuh:db2hjm 62> ls -ltr /db2/HJM/log_retrieve/NODE0000
total 4
drwxr-x--- 2 db2hjm dbhjmadm 4096 2009-09-01 14:15 NODE0000
In respect to your initial error: Can you check, whether the path is accessible for db2sid?
Can you try to set overflowlogpath to NULL and then set it again? -
Configuring a standard Badi for ESI refund
Hello,
I am Malathi working as HR-ABAPER.This is the First time I am working on BAdI .
I want to stop ESI retro refund by configuring the standard BAdI HR_IN_ESI_REFUND.But when I try to change the Interface Method (as mentioned in the F1 help ) its asking for access key.
Kindly advice on how to configure this BAdI.
Thanks and Regards,
Malathi V.Hi Faizur,
for this BADI doesn't allow multiple implementation I normally would have told you, that you can't use it, because the SAP implementation might be changed and reactivated by any support package.
BUT:
In our systems there are no SAP implementations for this BADI
SAP note 1716090 - RFIDYYWT: Enhancement to customer Badi WTAXREPORT_MODIFY clearly says, that this BADI is a customer BADI.
So why do you have an active SAP implementation for it? I would suggest, that you contact SAP in this case to clarify it.
Regards,
Klaus -
Dynamic configuration not fil in reused OM in NW BPM
Hi,
I'm having problem in operation mapping that i re-used in nw bpm.
In my scenerio in the operation mapping, a UDF writes on "TServerLocation" and in the next step of BPM, i have receiver determination rule which read from "TServerLocation" variable.
Below step calls OM which in PI.
(UDF writes on TserverLocation)
This next step, reads TserverLocation in receiver tab of Integration Conguration.
Receiver rule
So the problem is dynamic configuration doesn't write on TserverLocation or integration confiuration object removes in soap header somehow.
This was a ccBPM integration and all esr objects, mapping,udfs working fine. No problem with that.
I checked below blog but not get this work.
Dynamic Configuration not working with Integrated Configuration
Has anyone faced similar problem ?
Thank you
-TahirHI,
In general Correlation , concept, whatever we configured in Correlation editor , i mean in runtime which xml element should filled with which element of which interface ..as you said you have configured the local correlation to block, in block it is the first receive step, while receiving the first message which is relevent to first recieve step , i mean if it receives the one message which is related to first receive step inteface .. the respective element data will be filled in correlation id and it will assign on giud for processing , so while assign the runtime data to correlation element ( imean filling stage) check you said two elements in correlation does the first message contains these two elements ??
if so ok , no then check , and try to use the IM before calling the IP to fill the payload.
Regards
Chilla
Oh closed!!
Message was edited by:
Chandra Sekhar Chilla
Message was edited by:
Chandra Sekhar Chilla -
Can anyone point me in the right direction for the link to download Acrobat 9 Standard. I found the link to download 9 Pro but not standard. Old computer crashed and new computer does not have a CDR/DVD rom drive.
Hi,
Standard or Pro would be licensed through your serial number, the download link and downloaded file would be the same for both of them.
Pro or Standard would be determined after you put in your serial number.
Download Acrobat products | 9, 8
Thank You
Arjun -
JDBC Adapter configuration not initialized:null
i
we have a synchronous scenario with the following adapters , RFC <> XI <> JDBC.
1.JDBC Driver installation is done
2.RFC Destination type t is done in sap(sender) system.
3.checking the jdbc in VA is done
while running it is giving the following error.
com.sap.aii.af.ra.ms.api.RecoverableException: JDBC Adapter configuration not initialized: null
where we have to initialize JDBC Adapter configuration
Thanks in advance
Prasad Nemalikantihi prasad
There are 2 jar files that may be missing from your SQL JDBC driver --> msbase.jar and msutil.jar, I think once you add these to the driver it might work.
also check the driver string for the SQL driver 2 parameters
i.e 'com.microsoft.jdbc.sqlserver.SQLServerDriver' now becomes
'com.microsoft.sqlserver.jdbc.SQLServerDriver'
This will solve your problem
follow this link
Re: MS SQL Server jdbc Driver installation on XI .
XI JDBC Adapter using stored procedures
thanks
sandeep
Reward points if helpful -
"Configuration not possible for material PC-2011 : Reason 3"
Hi any MM guys,
Please help me to solve the following thread.
"Configuration not possible for material PC-2011 : Reason 3 --> Help
Message no. V1360"
Thanks and regards
D.Srinivasa raoI believe you are trying use Sales order for services....and you have created material in services if I am not wrong.
Again sticking to basic rules, you can configure only materials with type KMAT. Further for services, I believe there is a concept called milestone billing...which I am not sure about.
Chk SAP notes, 625092, 26187
BR,
Krishna -
JDBC Adapter configuration not initialized Error
Hi,
I am doing a RFC to JDBC scenario in PI 7.1. I am getting the following error:
com.sap.engine.interfaces.messaging.api.exception.MessagingException: JDBC Adapter configuration not initialized: null
In communication channel monitoring, it shows the following,
Error when attempting to get processing resources: com.sap.aii.af.lib.util.concurrent.ResourcePoolException: Unable to create new pooled resource: DriverManagerException: Cannot establish connection to URL '<URL>': SAPClassNotFoundException: com.ibm.as400.access.AS400JDBCDriver
The JDBC parameters for driver & connection are correct only.
Is the problem related to deployment of JDBC driver or something else? How can i ensure that the JDBC driver deployment is succesful in PI 7.1?
Edited by: senthil nathan on Mar 25, 2009 10:57 AMHi Senthil,
Your drivers are not installed properly. Please re-deploy them through SDM.
Regards
joel -
JDBC Adapter configuration not initialized
Hi,
I have tested one scenario for WebService to JDBC. Integration engine shows success message.But i got some error in Adapter engine. It shows "JDBC Adapter configuration not initialized".
So, plz anyone give the solution for this problem.
Regards
VijayHi,
1.Check whether the JDBCAdapter is Activated.
2.Check if any firewalls are there frm client side and open
3.Check the password used to connect the Database is correct one.
If all these are fine..do the complete cache refresh once.
Please award marks if found useful.
Thanks
Hamja -
Clearmake: Warning: Too many command lines for "pcscfg.cfg"
Hi,
We are in the process of migrating an application(contains pro*C code) from oracle 9i to 10g.
When the application is compiled on oracle 9i the compilation used complete with out any problems.
After we changed the ORACLE_HOME parameter in our makefile to point to 10g home. clearmake
gives the following Warning. though the build is successful
clearmake: Warning: Too many command lines for "pcscfg.cfg"
Could anybody please help me in getting rid of this warning?
Regards
SrikrishanHi,
I have removed all unwanted things from the makefile, but the problem is still there.
I have included a sample program and the makefile which reproduces the problem.
The problem goes away if I comment out 4th line from the makefile and use 5th line instead
Could anybody please help?
#################The contents of the make file are #####################
targets: proctest
#ORACLE_HOME= /data/oracle/product/9.2.0
ORACLE_HOME= /data/tsd_oracle/hpux/10.2.0.2
include $(ORACLE_HOME)/precomp/lib/env_precomp.mk
#include /data/oracle/product/9.2.0/precomp/lib/env_precomp.mk
ORACLEINCLUDES= -I$(ORACLE_HOME)/precomp/public
PROCSYSINCLUDEOPT=sys_include='(/usr/include,/opt/aCC/include,/opt/aCC/include/iostream)'
ALLPROCINCLUDEOPTS= $(PROCSYSINCLUDEOPT)
PROCPPFLAGS= sqlcheck=full lines=yes code=cpp def_sqlcode=yes $(ALLPROCINCLUDEOPTS)
ACC=/opt/aCC/bin/aCC
ORACLELIBS= -L $(ORACLE_HOME)/lib32 -l:libclntsh.sl
#===========================proc test==================================
proctest:proctest.o
$(ACC) -o proctest $(ORACLELIBS) proctest.o
#========================= General target rules ============================
proctest.o:
$(ORACLE_HOME)/bin/$(PROC) $(PROCPPFLAGS) CPP_SUFFIX=cc iname=proctest.pc
$(ACC) $(ORACLEINCLUDES) -c proctest.cc -o proctest.o
#####################program (proc test.pc)#########################
#include<stdlib.h>
#include<iostream.h>
#include<sqlca.h>
#define UNAME_LEN 20
#define PWD_LEN 20
EXEC SQL BEGIN DECLARE SECTION;
VARCHAR username[UNAME_LEN]; // VARCHAR is an ORACLE supplied struct
varchar password[PWD_LEN]; // varchar can be in lower case also
EXEC SQL END DECLARE SECTION;
void sql_error(char *msg);
int main()
EXEC SQL WHENEVER SQLERROR DO sql_error("ORACLE error:");
username.len = (unsigned short)strlen(strcpy((char *)username.arr, "scott"));
password.len = (unsigned short)strlen(strcpy((char *)password.arr, "tiger"));
EXEC SQL CONNECT :username IDENTIFIED BY :password;
cout<<"Connected to oracle \n";
return(0);
void sql_error(char *msg)
EXEC SQL WHENEVER SQLERROR CONTINUE;
cout << endl << msg << endl;
cout << sqlca.sqlerrm.sqlerrmc << endl;
EXEC SQL ROLLBACK RELEASE;
exit(1);
#################################################################### -
Configuration note of SQL SERVER 2005
Hello,
Is there a SAP configuration note for SQL 2005 like note 327494 for SQL 2000 ?
Or does someone know if there should be special configuration for SQL SERVER 2005 ?
Pelase advice,
DimitryHello
Please review 879941 Configuration Parameters for SQL Server 2005
thanks
N.P.C -
Why negative stock is possible for Moving avg price & not standard price?
why negative stock is possible for Moving avg price & not standard price?
Hi,
Negative stock is available for both MAP as well as Std. price.
Eg.
MAP-->
1. Mtl with MAP 1 Rs/pc & stock of 10qty.
2. GI done for 15 pcs. Each pcs evaluated with 1Rs (MAP). Stock value reduce by 15Rs. Offsetting entry takes place in consumption account of 15Rs. The stock and stock value is -5 each.
3. Post GR of 10pcs with PO price 3Rs/pc.
Now GR/IR should credited with 30Rs.
Negative stock (which issued) with 1Rs. But incoming mtl. is of 3Rs/pc. So difference of 2Rs for Qty 5 (Neg. stk) of 10Rs. will posted to Price Difference account. And remaining 20Rs posted to stock account.
Std. price.--> step 1,2 remain same
3. Post GR of 10pcs with PO price 3Rs/pc.
Now GR/IR should credited with 30Rs.
Durin GR Stock account posting will be 10Rs but due to negative stk value the net stock value will be 5 Rs. Remaining 20Rs posted to price difference acct.
Regards,
Sandeep
Maybe you are looking for
-
How to retrieve files from old hard drive?
Okay, so here is the deal. I have an iMac 27 inch with one of those faulty hard drives which needs replacing. The problem is that the hard drive is in such a bad state that I can no longer boot up with it. I have bought myself a external hard drive t
-
Hooking up to a printer...
Hey guys. I'm trying to hook up my ne Black Macbook to an HP printer connected to my dad's old Gateway computer. How do i connect to his network or to the printer? I've tried it several ways and I just haven't gotten it to work yet... Please help...
-
Its very urgent:How to insert data one table to another table
Hi all, i am very new to oaf. i have employee_number(per_all_people_f) lov is there.once select the employee number and click on the submit button what ever select the employee number it ll move to new_operation_manager in custom table. plz help me h
-
How do I Change the Cache size?
I have an iBook G4 and am trying to change the cache size for this screen saver I downloaded. iBook G4 Mac OS X (10.4.9)
-
Okay, so I am looking to simplify my photo storage process, as I recently got Photoshop and am going to be doing more and more editing and what not. I also have Aperture that I back up using its vault feature on my external hard drive, creating two l