PD - Find objects for qualifications

Dear ALL,
I am new in PD. In t-code PPPE_SEARCH_FOR_Q I want find qualifications for my position. I have a position with qualifications. And I have a person who has profile suitably to my position.
Qualifications tab page I have entered my position and restricted objects (selected only persons). In "restrict further" tab page have selected all persons for my business area. On executing there is blank. I dont know why? Have any idea?
regards
Samir

Hi Samir,
I didn't go into program details, so not very sure about the cause.
You made my day with your kind gesture, thank you very very much
All the best,
Dilek

Similar Messages

Implementing Boolean operators during find object for qualification

Hi Team
We would like to maintain requirements profiles for PD object (position,job etc.) in terms of qualifications (Q) using complicated boolean operators , for example :
((Q=English>4 OR (Q=French=5 and Q=Spanish>2)) OR (Q=German=6 and english<3) and Q=education # 2
The complicated boolean operators could be also : range,excluded from the range,equal,not equal,not exits.
We would like to execute the search for qualification ,profile matchup based on this complicated boolean requirments profile.
Is there any custom development or configuration to make this happen ?
Best Regards
Dror

Is this still true if the Collection generics elements are an interface type? For example, in the
code I sent earlier, I have:
/** The authorities granted to this account. */
private Set<Authority> authorities;
But Authority is an interface that is implemented by the DefaultAuthority class (maybe others
eventually). I was under the impression that in this situation, the metadata does have to provide
the actual type that will be in the collection.
But even if it works in Kodo, one of the requirements of my project is that the JDO implementation
be swapable with JPOX. When I started working on it, both Kodo and JPOX were at a much earlier stage
of implementing JDO 2, and if I recall correctly, JPOX required the implementation class (though I
don't know if it had to be fully qualified). I'm not sure that requirement has been removed from
JPOX yet, though I haven't checked in a while.
Thanks for your help with the default value settings though. Is there any place where I could have
found that behavior documented (Kodo docs, JDO2 spec, etc.)?
Mark
Abe White wrote:
p.s. You don't need to set the element-type in metadata if you're using
Java 5 generics; we can get the element type from the field declaration.
Also, when you do have to declare an element-type in metadata, you
don't need to fully qualify the class name if the element class is in
the same package as the field's owner (the current <package>), or in
java.util, java.math, java.lang.

Finding Objects for Authorizations

Dear PM Experts,
When we request the basis guy to restrict Authorizations for users we need to provide the objects for each transaction code with the restricted values. (ex-if I'm allowing only order type PM05 in IW31 T-Code for a particular role I need to specify the particular object from the T-Code IW31 and request to allow only PM05 for the particular role).
But the problem is I'm doing it for the first time and I'm not in a position to identity/find the objects of each T-Code. Can anyone help me out by providing a guidance? is there a particular T-Code to get the object of T-Codes?
Cheers
Deepal

hi
for PM here are the authorization objects
/MRSS/PB1           Multiresource Planning: Organizational Units
/MRSS/PB2           Multiresource Planning: Orders
I_AER                    Follow-Up Order Creation
I_ALM_ME              Mobile Asset Management
I_AUART                 PM: Order Type
I_BEGRP                PM: Authorization Group
I_BETRVORG          PM: Business Operation
I_CCM_ACT            Configuration Control authorization object
I_CCM_STRC          Structure gap maintenance authority
I_CONFLICT            WCM: Checks for Lockout/Tagout
I_FCODE                WCM: Function Codes (e.g. Operational Cycle)
I_ILOA                   Change location- and accounting data in the order
I_INGRP                PM: Maintenance Planner Group
I_IWERK                PM: Maintenance Planning Plant
I_KOSTL                PM: Cost Centers
I_MASS                 PM: Mass Data Change
I_QMEL                 PM/QM: Notification Types
I_ROUT                 PM: Task List
I_ROUT1                PM: Task Lists by PM Planning Plant, Work Scheduler, Status
I_SOGEN              PM: Permit
I_SWERK             PM: Maintenance Plant
I_TCODE              PM: Transaction Code
I_VAL                  WCM: Valuation of Applications
I_VORG_MEL        PM/QM: Business Operation for Notifications
I_VORG_MP          PM: Business Operation for Maintenance Planning
I_VORG_ORD       PM: Business Operation for Orders
I_WCUSE            WCM: Use of WCM Object
regards
thyagarajan

Find object for roles & authorization.

Hi Gurus,
How can i find the perticular object in SU24?
I need object for "RELEASE FLAG ICON" in IW31,IW32 T.code.
Till the time I have co relate following 2 objects.
I_BETRVORG & I_VORG_ORD and I have maintained both object value as a blank in role.
Still I am not able to control release activity thru that role.
Please guide any thing wrong or missing.

Hi Upesh,
Start the transaction that you like. Just before pressing the key "Release", type "/h" in the transaction code field and press Enter. This will activate the debugger.
Now press the "Release key" - the system will enter the debugger. Once there use the menu "Breakpoints -> Breakpoint at -> Breakpoint as statement" and enter the ABAP command "authority-check". Then browse through the execution of the program using the pushbutton F8 ("Continue"). The debugger will stop at all the objects being checked.
If you don't have a literal (enclosed in apostrophes ') after the keyword OBJECT but a variable, double-click on this variable to see its value.
Good luck!
Raf

Problem finding object for Custom Object Test

I need to create a custom object test that tests whether a an element is present after a record gets inserted into the database. The script is databanked and each iteration needs to insert a databanked record, then evaluate my custom object test to make sure the record was inserted. The trick is in writing the expression that finds the correct custom object. After one iteration, this is the code that finds the custom object;
RSWApp.om.GetElementByPath "window(index=0).link(text=""Category D"" | href=""javascript:OpenModal('DocumentCategoryAddEdit.aspx?documentCategoryId=377','400');"" | index=19)", element
Instead of always grabbing the object whose text is "Category D", I want to grab the object whose text is <<category>> (ie retrieved from a databank file). Search in the href or index isn't helpful because these will change with each iteration through my script.
I tried to modify the GetElementByPath to this:
RSWApp.om.GetElementByPath "window(index=0).link(text=dbValue|)", element
where dbValue is a local parameter that I set earlier on. When I run this, I get an object not found error.
Any ideas?

I much prefer to use RSWAPP.om.findElement. It is much more robust than FindElements. 
RSWApp.GetDatabankValue Is what is needed anytime you want to return Databank values to the VBA environment 
 
Your code should look something like the following: 
 
Dim dbVal as string
 
RSWApp.GetDataBankValue "MyDbVariable", dbVal 
 
This will return the contents of "MyDbVariable" which is defined and bound in the databank wizard to VBA variable dbVal. 
 
You can then use DBVal in your path:
 
RSWApp.om.GetElementByPath "window(index=0).link(text="" & dbVal & "" | href=""javascript:OpenModal('DocumentCategoryAddEdit.aspx?documentCategoryId=377','400');"" | index=19)", element 
 
If you decide to use Find elements instead of GetElementByPath, the syntax would like the following: 
 
Set element = RSWApp.om.FindElement(dbVal, "A", "InnerText") 
As you can see it is much simpler. 
 
Hope this helps!

How to find out the Number range object for Incident number

How to find out the Number range object for Incident number ?
CCIHT_IAL-IALID
regards,
lavanya

HI, an example.
data: vl_num type i,
 vl_char(6) type c,
 vl_qty type INRI-QUANTITY,
 vl_rc type INRI-RETURNCODE.
CALL FUNCTION 'NUMBER_GET_NEXT'
EXPORTING
 NR_RANGE_NR = '01'
 OBJECT = 'ZRG0000001'
 QUANTITY = '1'
SUBOBJECT = ' '
TOYEAR = '0000'
IGNORE_BUFFER = ' '
IMPORTING
 NUMBER = vl_num
 QUANTITY = vl_qty
 RETURNCODE = vl_rc
EXCEPTIONS
 INTERVAL_NOT_FOUND = 1
 NUMBER_RANGE_NOT_INTERN = 2
 OBJECT_NOT_FOUND = 3
 QUANTITY_IS_0 = 4
 QUANTITY_IS_NOT_1 = 5
 INTERVAL_OVERFLOW = 6
 BUFFER_OVERFLOW = 7
 OTHERS = 8
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
vl_char = vl_num.
write vl_char.
Regard

Need help for finding objects impacted by size change for an infoobject

hi all,
need help for finding objects impacted by size change
for xxx infoobject, due to some requirements, the size to be changed from
char(4) to char(10), in the source database tables as well as adjustment
to be done in BI side.
this infoobject xxx is nav attribute of YYY as well as for WWW
infoobjects. and xxx is loaded from infopkg for www infoobject load.
now that i have to prepare an impact analysis doc for BI side.
pls help me with what all could be impacted and what to be done as a
solution to implement the size change.
FYI:
where used list for xxx infoobject - relveals these object types :
infocubes,
infosources,
tranfer rules,
DSO.
attribute of characteristic,
nav attribute,
ref infoobject,
in queries,
in variables

Hi Swetha,
You will have to manually make the table adjustments in all the systems using SE14 trans since the changes done using SE14 cannot be collected in any TR.
How to adjust tables :
Enter the table name in SE14. For ex for any Z master data(Say ZABCD), master data table name would be /BIC/PZABCD, text table would be /BIC/TZABCD. Similarly any DSO(say ZXYZ) table name would be /BIC/AZXYZ00 etc.
Just enter the table name in SE14 trans --> Edit --> Select the radio button "Save Data" --> Click on Activate & adjust database table.
NOTE : Be very careful in using SE14 trans since there is possibility that the backend table could be deleted.
How to collect the changes in TR:
You can collect only the changes made to the IO --> When you activate, it will ask you for the TR --> Enter the correct package name & create a new TR. If it doesn't prompt you for TR, just goto Extras --> Write transport request from the IO properties Menu screen. Once these IO changes are moved successfully, then the above proceduce can be followed using SE14 trans.
Hope it helps!
Regards,
Pavan

How can I find services for object for PM Notification

Hi all
How can I find services for object(attached files ) for PM Notification ?
I can see then,for examle ,using transaction Iw22 :System---->Services for object
My requirement are : 1. open attached file of selected notification for display ( if exists one)
2. If user wants to attach file as service of object
what function exists for it ?
Please your help

Hi SD,
I have checked in SUIM and SU24 also. But I didn't find. Could you please tell me any other way to finding out the authorization objects.
Thanks,
bsv.

Find lock object for field

Hi Friends,
I have one qurey. I would like to know the lock object for field MATNR.
Any suggestion how I can find it out the lock object for specific field.
Regards,
Poonam

hi,
GOTO se11.
select Lock object Radio button.
Press F4.
A popup appears, in that popup, under Short Description, type
*Material* and press enter. you will get a list of lock objects, select your required.
Always give the first letter in CAPS. like *Material*.

How to find business object for particular tcode at particular event

Hi,
I want to know how i can find particular business object for particular tcode for certain event?
For example suppose for tcode PA40, if i create infotype for employee and when i save it after creating it then it must be stored in certain object. How i can find business object where all data realted to emp. get saved?
Thanks & Regards,
Parag

Hi Parag,
To get the business object for given transaction,
1) Go to transaction SWELS
2) Switch on the event trace.
3) Go to the given transaction (For which you want to know the business object)
4) Execute the transaction
5) Go back to SWELS and Switch off the event trace
6) Go to transaction SWEL.. Here you will get the Business Object name (one which starts with BUS)
Hope this will help you.
Best Regards,
Deepa Kulkarni

D3L "produce" error: unable to find attribute object for top node

Hi
I'm new to this forum, hope someone can help me with this because it's really been causing a headache for a few days now.
I'm trying to deliver a flat file message with an interconnect standard ftp adapter. All the transformations go well but then i get this error message:
oracle.oai.agent.adapter.technology.D3LException: [SmartQueueDispatcher] <struct id="GallupData" name="" comment="" ...>: unable to find attribute object for top node, got `[ stationId: 01
startDate: 040801
(messsage truncated)
emission: 1
]' instead
 at oracle.oai.agent.adapter.technology.D3L.produce(D3L.java:391)
 at oracle.oai.agent.adapter.technology.TechBridge.messageReceived(TechBridge.java:876)
 at oracle.oai.agent.client.SmartQueueDispatcher.run(SmartQueueDispatcher.java:451)
 at java.lang.Thread.run(Unknown Source)
The message is exactly 65570 bytes (in the format written to the log).
Any help appreciated.
Leon Simonsen

I finally solved the problem: The name of the d3l xml file must be named with the name of the data type. Just thought i'd let anyone know.

Where can I find Standard Info Object for 2LIS_06_INV

Hi
I have a requirement to find out the Standard Content objects for Block reason Qty,Price , Date Changed on,Blocking Reason Order PRice Qnty. Can any one let me know where I can find the 0Objects for this or do I need to create ZObjects ?
Thanks in advance

Hi,
Go to RSA1 and Go to Business Content Tab->In Object Type->Infoobject and Search there and transfer that and install.
or
TO RSA1 and Metadata Res
Search in Infobjects.
Regards,
San!

How to find Object name for a object?

Hi Experts,
How to find Object name for a particular Object? Is there a Tcode for it?
__Like Object name for__
Material number - materialnr
Goods receipts / return - matbeleg
Accounting documents - rf_beleg
How to find Object name for other Objects? Is there a particular way?
Thanks & Regards
Chandan

Hi,
You can find objects in SNRO transaction.
In SNRO search by giving long text...
for eg., Service .. for service entry sheet. keep the first letter in capital letter only.
Thanks & Regards,
Anand.

How to find out Authorization Object for Plant

Hi,
I have to implement an Authorization check for Plant in My Report Program.
Is there any transaction which can help me to find out Authorization Object for any field like Material and plant?
Thanks,
Mamta

Using SU21 u can create Authorisation Object.
The ABAP command AUTHORITY-CHECK is used for performing authorizaton checks in programs.
check f1 help on AUTHORITY-CHECK for the syntax.
check these links
link:[http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a92195a9-0b01-0010-909c-f330ea4a585c;jsessionid=(J2EE3417500)ID1605942050DB11298929682009193279End]

Can't find Business Object for Functional Location BOM in BAPI

Hi all,
I've to make Upload Program through BAPI for Functional Location BOM,for making that Upload i can't find BUSINESS OBJECT for FUNCTIONAL LOCATION ,Equipment BOM and Fleet Object (Vehicle).Kindly tell what Business Object should i used to create that Upload Programme.I shall be very thankful to you.
Regards,
ABAPFK

Hi
you have to do all steps in LSMW
1.Maintain Object Attributes
2.Maintain Source Structures
3 Maintain Source Fields
4 Maintain Structure Relations
5 Maintain Field Mapping and Conversion Rules
7 Specify Files
8 Assign Files
9 Read Data
10 Convert Data
11 Create Batch Input Session
Please maintain source fields required.thats important.(maintain 2 level-header and item,also provide common name of column to link to 2 files
Header file:sample
RECORDNAME     EQUNR     Plant
10001031                        10001031      3000
Item file:sample
RECORDNAME     ITEM NO     MATNR     Item catg   QTY
10001031                             10      P-1001          L               1
Regards
Seenu

PD - Find objects for qualifications

Similar Messages

Maybe you are looking for