PDF.OCX or AcroPDF.DLL

We have a Powerbuilder 9 and 10 application that use to use PDF.OCX, but we can no longer register the
file. We have also read this is no longer supported so we started investigating AcroPDF.DLL. Problem is no matter what we register, we receiv
e an error and this was the same error we receive when we register the PDF.OCX. We recently updated our machines to Windows XP Sp3, but that appears to be the only thing that was done. I have downloaded the Acrobat SDK and cannot figure out what we'd do to have Powerbuilder be able to choose the com object.
"DLL RegisterServer in acroPDF.DLL failed. Return code was 0x80004005"
Any help would be appreciated plz. Thanks.

lrosenth
e como é que posso instalar o AcroPDF.DLL no Delphi 7 ?

Similar Messages

Use pdf.ocx or AcroPDF.dll to open a pdf file in a form

Hi to all,
I have this kind of problem.
I need to open a pdf in a form, just for reading.
Even if my project is written in VB6, this is not the problem. It could be also in .NET, so I hope you don't reply anything about the development platform.
In a couple of threads, I found two ways to open a pdf in a form: using pdf.ocx or acropdf.dll.
In both cases, this solution works for me in debug, but not in deployed release.
I have two kind of problems:
- if the computer where I execute the program HAS NOT Adobe Reader installed, I have an error "missing dependencies" concerning acropdf.dll or pdf.ocx
- if the computer where I execute the program has Adobe Reader installed, I have an error concerning dll or ocx file version.
The solution works only if the AcroPDF.dll file included in my project has a version equal to the Adobe Reader version installed on the customer's computer.
How can I solve these problems?
The best would be if I could use one of this components without installing Adobe Reader.
If this is not possible, my further question is: if the Adobe Reader version installed on the customer's computer is greater than my AcroPDF.dll, will my project work?
If you need further informations to understand the problem, you can ask me.
Thanks in advance for replies.
Bye
Nino

PDF.OCX was an UNSUPPORTED COMPONENT that stopped being included as of Adobe Reader 7. Also, VB6 support stopped with Reader 7 as well. As Adobe only supports Reader 8 and later, there is no need to worry about either.
AcroPDF.dll is part of Reader - it isn't available separately. So yes, your users will need to have Adobe Reader 8 or later installed on their computer.
As long as you target Reader 8 or above, and AcroPDF.dll - you'll work with Reader 8, 9 and X...

Vb6: open pdf in form using pdf.ocx or acropdf.dll

Hi to all,
I have this kind of problem.
I need to open a pdf in a form, just for reading.
In a couple of threads, I found two ways to make this: using pdf.ocx or acropdf.dll.
In both cases, this solution works for me in debug, but not in deployed release.
I have two kind of problems:
- if the computer where I execute the program HAS NOT Adobe Reader installed, I have an error "missing dependencies" concerning acropdf.dll or pdf.ocx
- if the computer where I execute the program has Adobe Reader installed, I have an error concerning dll or ocx file version.
How can I solve these problems?
The best would be if I could use one of this components without installing Adobe Reader.
If you need further informations to understand the problem, you can ask me.
Thanks in advance for replies.
Bye
Nino

Post your problem in the forum for Acrobat SDK.

Pdf.ocx acropdf.dll

I have problem,
my computer is install Create PDF: "Acrobat 5.0" and "Acrobat 9.0" , and Viewer: "Acrobat 8.0 Reader"
(Q1) Can same register that "pdf.ocx" and "AcroPDF.dll"
(Q2) when open pdf file, that print to printer() is caller "Adobe Reader Printer_Function"
or "self create Visual basic 6 code to print" ?
Please!

Pdf.ocx is an unsupported component for development - as well as being from older versions of Adobe Acrobat/Reader that Adobe no longer supports in general.

When opening a PDF in IE 10 with Enhanced Protection Mode it displays "This website wants to run acropdf.dll"

I am running my application which requires JRE on Internet Explorer 10. Since the IE need to run in 64 bit mode, we have enabled the "Enhanced Protection Mode" in Security option of Internet Options in Advanced tab. But my application also opens
up PDF in the browser, when the page with PDF is invoked it displays "The webpage wants to run 'AcroPDF.dll'. If you trust this site, you can disable Enhanced Protection Mode for this site to run the control.(Disable)(Always Ignore)". And on
clicking any option the PDF is not displayed.
We would not be able to disable the Enhanced Protection Mode as the 64 Bit JRE would not be invoked for other part of the application.
Please let me know how to resolve this issue.
Regards
Navin

... and/or
Configure Adobe Reader to not use a Web Browser to open PDF documents... (see the Adobe.com for admx files to apply this setting by group policy) (
http://forums.adobe.com/thread/392489 )
Start>Adobe Reader>Edit>Preferences>Internet>uncheck "Display PDF in browser"
It seems that Adobe have recently changed the location of that setting in Adobe Reader (at least on 11.0.4). They've now hidden it under Edit > Accessibility > Setup Assistant > Then on page 5 of 5, there's a tick box to toggle 'Display PDF
documents in the Web Browser'.
However, it doesn't work like it used to though, as it won't just open a PDF in Adobe Reader instead of the browser. It will instead ask to disable Enhanced Protected Mode to run acroPDF.dll.
And if you try disabling the Adobe PDF reader add-on in Manage Add-ons to try and force it to open in Reader, then when you visit a PDF link, you just get the same blank page (shown below) with the black crossed out circle in the top left, but without the
message bar at the bottom of the window. The only way to open the PDF is to either turn off Enhanced Protected Mode and allow acroPDF.dll to run or if there's an original link to the PDF, right click and select 'save-as'.
I think it's about time Adobe released an x64 PDF viewer... Or at least there should be an open/save dialogue box in IE.
If you've got Reader 11.0.4 installed, you can try it for yourself with this PDF link:
http://helpx.adobe.com/pdf/adobe_reader_reference.pdf
(The below screenshot is with 'Display PDF documents in the Web Browser' UN-ticked in Adobe Reader settings, so it should open in Reader instead. But it doesn't. And with the Reader add-on disabled you get the same page, but without the
message at the bottom.)

Pb PDF Filename : AcroPDF.dll + VB6

We use the component AcroPDF.dll (Adobe Acrobat 7.0 Browser Control type library 1.0) in a VB6 program.
We use the method LoadFile to display PDF file in form. This method works fine.
The problem is after some LoadFile request, when we display the properties of the PDF file display, the filename contain illegal characters (seems to be binary characters)
No problem to show the file, but we have important problem to print. It seems that illegal characters make trouble in header of printing.

The version use of AcroPDF.dll is:
Accessibility=8.1.0,AcroForm=8.1.2,Annots=8.1.0,Checkers=8.1.0,DigSig=8.1.2,DVA=8.0.0,eBoo k=8.1.0,EScript=8.1.2,EWH32=8.1.0,HLS=8.0.0,IA32=8.1.2,ImageViewer=8.0.0,MakeAccessible=8. 1.0,Multimedia=8.1.0,PDDom=8.0.0,PPKLite=8.1.0,ReadOutLoud=8.1.0,reflow=8.1.0,SaveAsRTF=8. 1.0,Search=8.1.0,Search5=8.1.0,SendMail=8.1.0,Spelling=8.1.0,Updater=8.1.0,weblink=8.1.1,

AdobeReaderX pdf issues in IE9. Possibly related to ACROPDF.DLL Addon

I have installed and uninstalled and reinstalled AdobeReaderX and still can not open pdf's in IE9. Only thing i see that may be causing the issue is my addon ACROPDF.DLL is not listed in LOADED ADDONS. How can I resolve this issue?

Could you please let me know the following details:
1. What is the version of Adobe Reader being used on your system? Is it 10.1.3? If not, please download and install the same from http://get.adobe.com/reader/
2. Are you using the 64 bit version of IE? If so, please switch to the 32 bit version of IE since the Adobe PDF plugin is not compatible with the 64 bit IE.
3. If you indeed have version 10.1.3 and are using the 32 bit version of IE , please let me know the exact bvehavior seen when you try and launch a PDF in the browser. Do you get an error or a blank page or something else.
4. Is the following checkbox checked under the Reader Preferences (Edit > Preferences > Internet)
"Display PDF in browser"

[pdf.ocx] reload verhindern

hallo auch,
ich programmiere auf das pdf.ocx.
mit loadFile lade ich mir ein pdf-file rein und das wird auch vernünftig angezeigt.
nun ist es so, dass mein programm viele pdfs hintereinander relativ schnell einlädt und bei jedem reinladen das aktuelle pdf anzeigt.
also pdf laden ->anzeigen->nächstes pdf laden->anzeigen..
das MUSS auch so bleiben.
jetzt die frage, wie kriege ich es hin, dass NICHT nach jedem loadFile das ganze control scheinbar neu lädt? also es verschwindet dann und taucht dann wieder auf, was zeit kostet.
es soll bitteschön immer sichtbar bleiben.
geht das?
danke für die hilfe.

lrosenth
e como é que posso instalar o AcroPDF.DLL no Delphi 7 ?

Need to track if a user printed a doc via builtin AcroPDF.DLL control

I am creating a small application in Visual Studio 2008, using VB.NET.
I am getting a PDF from a webservice, and need to do a couple things:
1.) Show the PDF to the user with all available controls (i.e. Print, Save, Email, Change Size of viewer, etc.).
2.) If the user selects print, I need to know that the user printed the piece so that I can log it to our database with it's 'last printed date'.
I have the retrieval and presenting part all working perfectly using the AcroPDF.dll to tap into the user's Acrobat Reader (latest version) that they have installed on their computer; but can't seem to figure out if there is some way for me to know that the user went into the print dialog from the automatic toolbar that is created and used by the AcroPDF.dll when I use the following command:
AxAcroPDF1.LoadFile(<file name goes here>)
Is there some way for me to intercept some event within the AxAcroPDF1 object so that I can interrogate it an know whether or not the user printed the report?
While I am asking, I will also ask about the Send Email method, is there a way that I can tell if the user clicked on it and went into, and completed, that function?
If there is no default way to tap into the existing infrastructure, is there an easy way for me to 'override' the existing print button so that it calls a function that I create instead of the one it currently does?
I would like to keep the visual aspect like it is, if possible, to keep it as polished as I can.
Thanks,
Jim

lrosenth,
Thanks for the reply! I have only two follow up questions:
1.) What, exact javascript am I supposed to insert into the PDF that will allow me to know if the user printed the document from within my windows based application? I have injected javascript before into a PDF, but for a different reason.
2.) Where, exactly, would I want to inject the javascript into the PDF?
any example javascript code, etc. would be appreciated!
Thanks,
Jim

Problem in using AcroPDF.dll in vb6 application

I have an vb6 application and i want to display a PDF file in a form. I have used AcroPDF.dll and works fine on developmeny system.
But when i install application on client's system i get error "Out of memory" when i try to open the form with PDF control.
can anyone help me with this.
Thanks

Try asking this question in the Acrobat SDK forum.

Difference between AcroPDF.dll and Acrobat.exe while loading standard and custom plug_ins

Hi,
I want to know the difference of behavior when AcroPDF.dll loading the PDF file in the internet explorer and Acrobat.exe application loading PDF in context of plug_ins developed by Adobe or Custom plug_ins using SDK.
When I am loading PDF within Acrobat.exe all the plug_ins (Standard as well as Custom) loaded successfully and working fine but at the same time if I am loading a document within Internet Explorer, behind the scene internet explorer using AcroPDF.dll which is ActiveX for IE to load PDF and it is trying to load plug_ins (standard and custom) but some how my custom plug_in is destroyed or currpted and it is not working any more.
I want to know how AcroPDF and Acrobat.exe using AcroExch.App class or using any other thing to load plug_ins?
Thanks,
Twinkle

For this level of support, you join our developers/partners program and submit a formal support request.

11.0.07 crashes acropdf.dll activex control in 3rd party application

Hi, we use a piece of software that makes use of the acropdf.dll library - when updating Adobe Reader (on any version of Windows) to 11.0.07, the software that uses acropdf.dll crashes as soon as it tries to display a PDF (citing acropdf.dll as the module that failed) - rolling back to any previous version of Adobe Reader cures the problem. (Even 11.0.06 works fine) - this has been repeated several times on different machines and different versions of Windows, all with the same result.
Is this a known problem with the latest 11.0.07 release?
Thanks in advance.

Mesmo problema em minha aplicação VB6
Tudo funcionava corretamente. Quando executei a atualização do Adobe Reader XI para 11.0.07 apareceu o erro na aplicação.
"O Visual Basic Parou de Funcionar"
Um problema fez com que o programa parasse de funcionar corretamente. O windows fechará o programa e o notificará caso uma solução esteja disponível.
O erro ocorre quando a aplicação esta rodando e ao abrir o formulário onde contém o componente baseado na dll AcroPDF.dll
O erro também ocorre ao abrir o formulário que contém o componente dentro do VB6 em modo de desenvolvimento..
Não é possivel nem retirar o componente do formulário pois não exibe o formulário e fecha o VB6.
Acredito q o problema esteja na DLL AcroPDF.dll e sua atualização

How to use AcroPDF.dll even if addon is deactivated in InternetExplorer

Hello,
hopefully someone can help me with my problem:
I need to instantiate AcroPDF.dll and have it deactivated at the same time in InternetExplorers Addon-settings.
But when I deactive the addon in IE, CreateObject("AcroPDF.PDF.1") throws an error that the instance could not be created, but the dll is still registered.
How does this deactivation work technically? Is there any way to use the dll in other applications regardless of the IE-settings?
Best regards and thanks in advance,
Thomas

For programming issues you should use the forum for Acrobat SDK.

Use AcroPDf.dll with 64 bit

Hi,
I am trying to display the pdf by adding Adobe Reader's COM component to my 64 bit application . But it throws error.
Is there any way I can use the AcroPDF.dll with 64 bit?

Those DLLs are only for 32bits.

About acropdf.dll

I want to display an pdf file in my own application.
I want to know what's the difference of Acrobat and Reader's acropdf.dll and the difference of each version(7~9) acropdf.dll.
There are 3 interfaces:
void postMessage(const VARIANT& strArray);
VARIANT GetMessageHandler();
void SetMessageHandler(const VARIANT& newValue);
I don't know how to use them and is there any specification for the this?
Thanks!
Jasper.

The Acrobat SDK has all the documentation you'll need along with sample code. Start there!

PDF.OCX or AcroPDF.DLL

Similar Messages

Maybe you are looking for