PDFs with automatic follow on pages using forms

Im trying to find out if there is a way to create a PDF where if you are typing in a form on it and reach the bottom of the page, it will automatically create a new follow on(run-on) the reason it has to be in a form, is so that the PDF forms we have in our office are universal, for old and new macs and PCs and the fonts are constant & cant be changed by the user.
So for example if we have a memo page, we just type on it and then we have to start again if we reach the end of the page, is there a way in which we can set up the end of the page, so that when it is reached, it opens up a new page automatically and you can continue typing?
anyone has any ideas or suggestions?
Many Thanks

That's possible with a dynamic XFA PDF form created with LiveCycle Designer. LiveCycle Designer comes with Acrobt Pro. If you've not used it before, you should be able to find tutorials and can ask questions in the Designer forum here.
It's also possible with a standard PDF form (acroform) using templates, but these normally won't work with Reader.

Similar Messages

  • Create a PDF with 6 slides per page from a ppt ALL on the iPad

    Is there any way to create a PDF file with six slides per page from a PowerPoint presentation using only an iPad (and apps)?
    I know how to do this on a Mac (i.e. Print > 6 per page> save as PDF) but is there a way I can do this all on the iPad?
    Basically i want a way to output a ppt or keynote document with 6 slides per page using only the iPad. I have both Keynote and PowerPoint for iOS on my iPad.
    any help would be much appreciated!!
    p.s. I'm using an iPad 2 running iOS 7.1.2 ( but will be updating to iOS 8 in the next few days when it comes out). Jailbreaking is not an option!!

    iWork for iOS
    Try asking here. It's your best chance of getting an answer.

  • Export to PDF from Autocad: Acrobat always opens PDF with 'layers panel and page' shown.

    Hello,
    Whenever I export to PDF from Autocad, Adobe Acrobat opens the PDF with the 'Layers Panel and Page' shown.
    Each time I have to manually go to 'Properties' and select 'Page only', close 'Properties' and close the PDF and select to save the changes, in order to show the just the page.
    Is there a way to make PDFs always export to 'Page only' automatically as default?
    Thanks!
    Ione

    Thakns Peter, I had seen this thread, but it doesn't really address my issue. I've exported individual chapters from the book file, all with success, so I know there isn't a file corruption issue.  The problem seems to do more with memory allocation/usage. 
    I have tried: quitting and then immediately exporting the file, and even rebooting and then relanuching and exporting.  Both of these allow me to get a few pages farther along, but still not through the entire book.
    I remember back in the day there used to be a setting for how much RAM/dis c space was allocated to a certain applicatino (I knowm it was a long time ago).  I didn't know if there might be something like this hidden somewhere

  • Passing data from one page to another page using form bean

    hi,
    refer to above question, i had follow the sample found at weblogic sample application
    ,but unfortunately when i create my own application. The following error occur:
    [Caught exception when evaluating expression '{actionForm.note}' with available
    binding contexts [currentTag, session, pageContext, request, response, application].
    Root exception cause: com.bea.wlw.netui.script.xscript.IllegalContextStateException:
    The action form for the expression "actionForm["note"]" could not be found
    can anymore tell me what has i miss !
    {program flow -
    pageA.jsp[userinput] ->getConfirmationAction-> pageB.jsp[confirmation]
    -> protected Forward getConfirmation(TransferBean
    form) throws Exception
    return new Forward( "show_confimation" ,form);
    thanks & rgds
    cassy

    Cassy,
    If your page flow looks like this:
    first.jsp -> actionA(FooForm) -> second.jsp -> actionB()
    Then I think the problem is that there is no action form in scope as
    second.jsp is rendering. This is because the action raised by
    second.jsp is actionB, which has no form, and hence no {actionForm}.
    You have two options:
    Option A - use page inputs (available in the upcoming Service Pack 2)
    ---- JSP:
    <%-- At the top of your second JSP... --%>
    <netui-data:declarePageInput name="myPageInput" type="APageInput"/>
    <netui:label value="{pageInput.myPageInput.name}"/>
    ---- JPF:
    * @jpf:action
    * @jpf:forward name="success" path="second.jsp"
    protected Forward actionA(FooForm form)
    APageInput input = new APageInput(form.getName());
    return new Forward("success", "myPageInput", input);
    Option B - since the form is still technically in the request, use it as
    a workaround until option A is available to you.
    <netui:label value="{request.fooForm.name}"/>
    I hope this helps.
    Thomas
    Eddie O'Neil wrote:
    Cassy--
    Is there a <netui:form> tag on the page which displays this error
    (pageB.jsp?)?
    The "actionForm" binding context can only be used inside of a
    <netui:form> tag. To display data in a read-only page (no form), you
    can put the data in the request and reference it with the "request"
    binding context.
    Hope that helps...
    Eddie
    cassy wrote:
    hi,
    refer to above question, i had follow the sample found at weblogic
    sample application
    ,but unfortunately when i create my own application. The following
    error occur:
    [Caught exception when evaluating expression '{actionForm.note}' with
    available
    binding contexts [currentTag, session, pageContext, request, response,
    application].
    Root exception cause:
    com.bea.wlw.netui.script.xscript.IllegalContextStateException:
    The action form for the expression "actionForm["note"]" could not be
    found
    can anymore tell me what has i miss !
    {program flow -
    pageA.jsp[userinput] ->getConfirmationAction-> pageB.jsp[confirmation]
    -> protected Forward
    getConfirmation(TransferBean
    form) throws Exception
    return new Forward( "show_confimation" ,form);
    thanks & rgds
    cassy

  • Printing PDFs with more than one page size

    A large client sent me a PDF of mostly usLetter-sized pages, but with some in-line 11 x 17" pages he intended to Z-fold. I was able to vary the size of the bounding box within the Windows drivers by selecting "Choose Paper Source by PDF page size". That way I would eliminate the vast white spaces created by putting letter-sized images within an 11 x 17" bounding box, or alternatively, shrinking or masking 11 x 17" images to fit a letter-sized bounding box. With the advanced settings of our printer's drivers, I was able to program the two paper sizes into the print job.
    I can't seem to find a control like "Choose Paper Source by PDF page size" in my Mac OS X v. 10.4 (or 10.5) drivers. Are they absent or am I?

    Mike, it's a production run with lots of copies and lots of pages per copy, so it'd be too labor intensive to be cost effective if there's a high-tech way of doing it.
    That way is to put it on a Windows workstation to gain access to the "Choose Paper Source by PDF page size" control that the MS drivers offer. This sets the bounding box rather than the paper as the interface mistakenly indicates.
    Then use the PCL drivers because of the way Microsoft's PS drivers position the images.
    Make sure to set your letter-sized body pages to 2-sided and, if you can, your Ledger-sized pages to 2-sided, flip on short edge.
    Again, it's a shame that the Adobe/Apple interface doesn't offer the same ability that the Adobe/MS interface offers.

  • PDF with portrait and landscape pages

    I have a pdf with following composition:
    - first page include a dynamic table where users can click a button to add rows (portrait orientation)
    - second page include static content (portrait orientation)
    - third page include static content (landscape orientation)
    - fourth page include static content (portrait orientation)
    The problem is that when the table grows, the second page takes the landscape orientation,
    the third page takes the portrait orientation...
    It's possible keep the settings defined for that all pages generated from dynamic table takes
    portrait orientation, and the next page (initially the third page) keeps the landscape orientation.
    Thanks in advance.

    Don't works correctly.
    Attached a pdf test.
    https://www.yousendit.com/directDownload?phi_action=app/directDownload&fl=SWhZekZuTkFuSlR2 WnBSYTA4bnVnVE9yVEh2Z0g0R2oxeStBYWNnMnpwZDBFT0FjRlZrSW9acXREaGJNUWRGeC95VVhBWnlVQndJaks5d3 JPb3F4VXprMEhnb2hUbFlaMFlDWmNBPT0&experience=bas
    Thanks!!

  • Create a PDF with multiple images per page

    So this seems really simple, but i cannot figure it out... i am creating a PDF from 30 JPGs and rather than having an image on each page in the PDF I would like to set it up so that there are 6 images per page... any thoughts .. thanks in advance
    cheers
    matt

    Once you have the PDF with a single image per page, print it out to a new PDF with 6 pages per page.
    Either that, or use an authoring application like Word or InDesign.

  • I want to set up firefox with 2 seperate home pages, using google with 2 different email addresses

    I use igoogle, and I have 2 separete email addresses which I use for seperate reasons, as I will be setting up a web page using one of them. As to this I wondered if there was a way to set up having 2 shortcuts or 2 downloads of firefox with each one having a different homepage, but still using igoogle.
    Do I need to download another copy of firefox and while setting it up, set it up with the different email address? Or is there another way of doing this? Or is it something that cannot be done?

    I use igoogle, and I have 2 separete email addresses which I use for seperate reasons, as I will be setting up a web page using one of them. As to this I wondered if there was a way to set up having 2 shortcuts or 2 downloads of firefox with each one having a different homepage, but still using igoogle.
    Do I need to download another copy of firefox and while setting it up, set it up with the different email address? Or is there another way of doing this? Or is it something that cannot be done?

  • Quick Look PDF with vertical and horizontal pages

    Is there any way to make Quick Look preview a PDF file with vertical and horizontal pages without adding white padding and retaining the aspect ratio?
    Now, if I have a PDF with page 1 vertical and the other pages horizontal QL shows the latter also with the ratio of a vertical page and adds white padding at their top and bottom. You get the inverse output if the first page is horizontally oriented, but the rest are vertical.

    Word renders print jobs that change the orientation as separate print jobs. So, each print job becomes its own PDF.
    You can make an Automator workflow to combine PDFs. I’m not sure how it decides the order it combines them, so you’d have to experiment.
    This is built as an Application where you’d drop all of the PDFs onto the App icon and it will open the combined PDF where you can edit, name, and save.

  • How to create .pdf file on a button click using forms

    Hi
    I want to create a .pdf file. Could you please tell me how can I do that?
    regards

    Hi!
    Do you use reports?
    Just set
    desformat to PDF
    destype to cache and
    desname to the email recipient/s (max 80 characters) eg: [email protected],[email protected] ...
    Do you use forms client/server or forms on the web?
    Regards

  • How to save a pdf with multiple slides per page

    I have multiple pdf files that I would like to combine but for some of those files, there were originally from powerpoint. For those files, I would like to change the pdf so that there are multiple slides per page. I don't have a copy of the original powerpoints. I am trying to find an easy way to do this because I have at least a hundred pdfs to do. Thank you!

    You could print a PDF to the Adobe PDF printer, and select multiple Pages per Sheet on the Layout tab of the printer Properties dialog. Printing a PDF to PDF is generally frowned upon, but once it a while it comes in handy. It could have some unwelcome side effects though like wiping out your carefully crafted accessibility tags, bookmarks, and some document properties.

  • Creating a PDF with automatic page turn after playing a movie

    Is there anyway to create a pdf where pages get turned automatically after a movie has been played? Simply put, I need to create a slideshow with both movies and images, and with an automatic page turn every x seconds the movies might be either too short or too long.
    Any help will be greatly apreciated!
    best, Jacob

    Did you ever figure this out? I would love to know.

  • How to view the pdf files stored in client side using  forms 10g

    Hi All,
    I am using webutil to upload and download the blobs from database. I susccessfully uploaded/downloaded the blobs from database to client(d:\temp.one.pdf)
    Now I want to view the download pdf through form.
    Can anyone help me regarding this?

    I have tested the sql and found that there are no records in the table in which iam uploading the file
    In the form, I am joing tow tables mapping with rpt_num
    Even after adding information for the image table like image_no,image_name and
    when i click on upload to db icon. it gives me the same error WUT-113
    I think I need to save this basic information first and then upload the file
    can you please advise where can i add this code to save the data first
    below is the code iam using to upload the file from database
    PROCEDURE UPLOAD_DB IS
    l_success boolean;
    BEGIN
    l_success := webutil_file_transfer.Client_To_DB_with_progress
    (clientFile => :images.file_name
    ,tableName => images'
    ,columnName => 'RPT_IMAGE'
    ,whereClause => 'RPT_NUM = ''' || :PVT.PVT_SA_RPT_NUM || ''''
    ,progressTitle => 'Upload to Database in progress'
    ,progressSubTitle=> 'Please wait'
    ,asynchronous => false
    ,callbackTrigger => null
    if l_success
    then
    message('File uploaded successfully into the Database');
    else
    message('File upload to Database failed');
    end if;
    exception
         when others
         then
         message('File upload failed: '||sqlerrm);
    END;

  • Interactive PDF with buttons printing blank pages

    Hi
    I am creating interactive pdf's using indesign cs6 on MAC which have buttons that show and hide other buttons when clicked, i have checked printable for all of the buttons as i want the buttons to be visable when printed.
    When i export it everything is fine and all works well and when i print the document from the MAC it prints fine but when i come to print it from the PC it prints blank pages. This is a issue as these documents will be printed from a PC, I have tried different PC's to see if it was mine that wasnt working but the result is the same, printing blanks.
    Is there any way to overcome this problem?
    Best Regards
    Rob

    On the Mac go to File>Export and choose pdf like you normally do.
    With the pdf settings that work make sure you click the "Save Preset" button.
    Exit out of the PDF export dialog box and go to
    File>PDF Presets
    And Define them
    From here select your Preset that you just saved and Save it to the hard drive.
    Load this PDF Preset into the PC settings.

  • Can I make a pdf with hyperlinks from Power Point using Acrobat ?

    I have a Power Point presentation which includes hyperlinks to websites. When I use the Power Point slide display they work.
    Can Acrobat make a pdf from Power Point which includes the hyperlinks ?
    Will the hyperlinks work when the pdf is displayed by Acrobat Reader?
    Thanks
    John
    newbie

    But I want the pages in the pdf shown spreadwise.
    In AcrobatPro you can set the initial document view of single pages as spreads via Page Layout: Two-Up Continuous (Cover Page)

Maybe you are looking for