PDP Issue

Hi All,
I have made all the requisite settings for the PDP.
I could transfer a couple of PRs from R3 into teh SRM 5.0,
which created a Shoppping Cart.
But after a couple of days, I am unable to move the PRs into SRM.
It is getting stuck in the queue and as nad when I try to release from the Queue,
I am getting an error as under
Application aborted due to serious errors.
RFCs are OK
I s there any way to debug?
Any clues are welcome,please.
Nagarajan V

Did you miss any steps in the following
Using an entry channel, the requisitions are transferred into Enterprise Buyer.
This channel must have at least one entry user.
Corresponding to this entry user, you have to set up a RFC connection from back end to Enterprise Buyer by using this special RFC user.
To get the requisitions in the work list for purchase orders, or in sourcing, there is a local purchasing group required with the responsibility for the entry channel
and the product category of the back end requisitions.
Customizing of sourcing
ViewV_T160EX in the SAP back end determines which material groups and
purchasing groups are grouped into a profile. View V_T160PR determines
which profile targets to which RFC connection.
regards
Muthu

Similar Messages

Strange PDP issue

We are in SRM 6.0 with ECC 6.0 as the backend. We are having the following issue with plan-driven (using ECS):
There are 2 purchasing groups in the org model which refer to the backend - Y04 and Y05. All the requirements are sent into SRM assigned to Y04, even though there are pur reqs in the backend which have Y05 as the pur grp.
Anybody have a clue ?
Thanks
-Bakulesh

this is because the redetermination of org data by SRM for purchasing responcibility.
When SRM receives any external requirement it checks for all responcible PGRP and of all found find first is done.
That's why all yr PRs are assigned to Y04 only.
In our set up we employeed
BADI PRGP_ASSIGN &
BADI DOC_CHANGE
for this purpose
(pl check the syntax)
BR
Dinesh

PDP issue - ext reqts missing in SRM system

We are using SRM 4.0 and R/3 release 4.7 and implementing the PDP (plan driven procurement) scenario.
The purchase req is sent from R/3 to SRM, but this requisition is not going as an external reqt in the SRM system.
We get an error in SLG1 - "Enter exactly one partner of type Requester" - what does this mean ?
-Bakulesh

Hi Bakulesh,
in this External Requirement Scenario, R/3 is calling an SRM RFC function module to create a SC (with subtype External Requirement). Like for any SC, the requestor partner is mandatory. In this case, the RFC user used in this RFC call (i.e. defined in the R/3 RFC destination for SRM) is used as the requestor.
For this it must be "integrated" into the SRM org structure (what is called inbound channel), and not only created as SU01 user.
So check that your RFC user is an SRM "employee" (if not you can do it with USERS_GEN).
Rgds
Christophe
PS: please reward points for helpful answers

Logical system not defined.

Hello
Can some body help me to identify the issue which gives me an error,No Logical system for FI is manitained .
This error, I receive at the time of approving shopping carts.
Thanks.
Jayawant Gokhale

Hi,
Pls refer the foll threads:
PO transfer from SRM to vendor system
PDP issue - ext reqts missing in SRM system
External system to SRM
Re: Upload PO from XML file in SRM
BR,
Disha.
Pls reward points for useful answers.

Application aborted due to serious problems

Hi,
Wwhen I transfer PR from MM TO SRM via the report BBP_EXTREQ_TRANSFER.the atatus on the queue in MM is Application aborted due to serious problems.

Hi,
See these related threads for more pointers;
PDP Issue
Unable to transfer Purchase Requisition from ECC to EBP
error in plan driven scenario
BR,
Disha.

Plan Driven Procurement

Hello Gurus,
Can someone please guide me on the config settings for MRP Run on SRM Side for creating external requirement and completing sourcing. Any document on complete MRP cycle will be highly appreciated.
Thanks in Advance!

BADI ME_REQ_SOURCING_CUST holds the logic for the PR transfer to SRM.
You may refer to the link below these contain the basics of knowing the PR transfer in PDP scenario from SRM to ECC .. and also contain the config guide
Let me know if that helps .
http://help.sap.com/saphelp_srm70/helpdata/en/ba/c346a35c2e4aa78bfeb99f60a40266/content.htm
Not 1263876
http://scn.sap.com/docs/DOC-2721
http://scn.sap.com/community/srm/shopping-cart-and-catalog/blog/2013/02/23/pdp-issue--pr-is-not-getting-transfer-from-ecc-to-srm

Project Risk and Issue link in PDP

Hi ,
I need to create issue item in a PDP with the New item form.
In my organization people don't want go another page for creating issues , risks and deliverable.
How to integrate with these item in a PDP or how to put direct link for create new item in a PDP.
Another PDP they need to show the created items also .
Is there any way to do this scenario?

Hi,
You will find below 2 blogs with the procedure for displaying risks and issues lists in a PDP.
http://nearbaseline.com/blog/2015/03/project-site-risk-list-in-a-pdp-webpart-2013-version/
https://pwmather.wordpress.com/2014/04/11/want-to-see-risks-and-issues-on-a-projectonline-projectserver-project-detail-page-ps2013-sharepointonline-sp2013-office365-javascript-jquery/
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

SRM PDP Screnario related issue

Hi,
We are on SRM7.01 with ECC 6.0 EHP 4.
This is in reference to Plan Driven Procurement.
Issue : Any Change in PR is subjected to release stratergy but on change only "without release" data transferring to SRM.
Changes like " Qty, Delivery date" etc made in PR and went for release but without considering release status changes went to SRM.
This is not the case for Fresh PR , In this case any PR subjected to release will go to SRM only after complete release.
Any Event linkage i am missing ?
Any note is availaible ?
Whats the standard behaviour ?
Advice from your side will be highly appreciated.
Regards,
Neeraj

this happens because of this..
class: CL_MMPUR_EXT_SOURCING
method: IF_EX_ME_PROCESS_REQ~POST Post
when you click save, this method is called and if you just have a quick look at it, it checks if the PR has been sent before to external sourcing .. .without checking anything else it sends again.
raise this with SAP. let the answer. you are not wrong.
so, may be in the badi can be used for time being
ME_REQ_SOURCING_CUST. clear the sourcing flags if the item is not released yet.

Mini DisplayPort to DVI issues

I just recently purchased the new aluminum MacBook, having previously owned one of the very last iterations of the white MacBooks.
With my old white MacBook I had purchased a Mini-DVI to DVI adapter, and was using that to connect to a DVI to HDMI cable, and that cable was going into my HDTV. I would select and check Overscan under the Display Options of my HDTV, which appeared as PDP-xx50SX under my MacBook, and two black bands would be added to the top and bottom of my MacBook's display, and I would get a full screen crisp image on my HDTV that I was very satisfied with, I would use this to view TV Shows and Movies on Hulu without any issues.
I no longer have that MacBook as a few days ago I got my new aluminum MacBook, and with it my Mini DisplayPort to DVI adapter. 4 hours ago I wanted to catch up on The Office, so I plugged in my new adapter to the Mini DisplayPort, hooked up my DVI to HDMI cable, and that into my TV, just like I did with my previous MacBook. That was 4 hours ago, and I am still unable to properly configure it like my last MacBook.
I have been beating my head for 4 hours now looking across every forum on the internet, every thread, and every possible way to type out this issue on Google to find any and all results. For some reason I just do not get the Options tab like I was able to on my old MacBook where I could then select the Overscan checkbox.
This is really frustrating, I've tried every possible combination of resolution, mirrored and not, and nothing works like it did with my old MacBook. I simply cannot get a correct full screen image on my HDTV.
Is this a firmware issue? Has it already been addressed and I somehow missed it? Is there any fix? Is this the cause of DisplayPort? Why wouldn't nVidia's 9400m be able to do the same thing Intel's GMA X3100 did? So many questions, and I didn't know where to turn to so I came here to the Apple Support forums hoping I'd get some resolution or reassurance this is something that will be/is being addressed. The only fixes I've seen online are programs like SwitchResX or DisplayConfigX, but I'm not that technically savvy and would rather not fry my screen, especially when it worked perfectly out of the box with my older MacBook. Help!

I am also frustrated by the new display port. I have purchased a DisPort to DVI connector from the Apple store and the pin configuration is different than previous all other Apple adapters (DVI-I). The 4-ins around the blade are missing in the new adapter. The genius bar said in Orlando that the new adapters are a new version of DVI called DVI-D. So all my previous investment cabling is hosed. I was away from the home 20 so I purchased yet another $29 VGA adapter from the Apple store to complete my mission.
Moral of the sad story - Buy a DVI-I to DVI-D adapter if you own and use a MacBook for presentations. The Apple Store does not carry them.
Hey wait a minute is this tied to the disappearing Firewire connector???
Mike
PS - I was ablt to find a DVI-D to HDMI connector that I will try when I get back home...stay tuned!!

How to Resolve a PDP authentication error on iPad mini

What do I do if I get a PDP authentication failed error when I try to access data?

Same issue. Sitting here in Europe (Germany) trying to do some work. From the Support technical discussions, there are numerous complaints like this. Went by T-Mobile twiice already; they point the finger at Apple. (I'm sure I could call back to the USA and sit on hold for an hour, with most likely Apple blaming the telco's.) Not very impressed to say the least. Wonder how Android is doing in this regard ...........?

IPhone 4s 64GB Network Issues

I have a iPhone 4s 64GB that has intermident wifi network issues. I have completely restored the phone and am running in factory configuration with only one app installed (ping utility)and am still experiencing the following issue. When using the network (safari, facetime, etc) the network will become unresponsive. If i start a ping from the device the to the network gateway I get no response. If I ping the iPhone from the computer I get no response. If I toggle airplane move on then off everything starts working and the device will start to function normally and respond to pings. This happens continually throughout the day to any network I am connected to. I have received a replacement device and still have the same issue. I have talked to apple numerous times and they still say it is hardware. I have also deployed 100 iphone 4s to our company and hear of similar issues. Has anyone else had this issue or found a resolution? I am a very big advocate of apple products but after this exprience I will no longer be upgrading to the latest and greatest. I have reverted to using my iPhone 4 with ios5 with no issues.
I have attached the console logs from my iphone that retrieved from the iPhone configuration utility from a time when the issue was occuring.
Nov 14 12:07:25 unknown lockdownd[22] <Error>: 0173b000 __handle_watcher_service_start_block_invoke_1: Stopping heartbeat service for host 30225B68-00D2-49E3-AE4A-38D7AA7B605B
Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateWillChangeToGated(): cap 0x8000, stateNum 0, dev 0x81609000 (this 0, provider 1)
Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOffSystem() : Powering Off and sleeping
Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOff(): fStateFlags(34822)
Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Unicast IP filter enabled
Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled WOMP filter 0 (ID=103)
Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled WOMP filter 1 (ID=104)
Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled the '!ICMP' packet filter
Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLAN Sleeping on BSS:   @ 0xc1b50c00, BSSID = 5c:d9:98:02:9a:40, rssi = -48, rate = 54 (100%), channel = 7, encryption = 0xc, ap = 1, failures =   0, age = 2498, ssid[ 9] = "CMSFLWLAN"
Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLANBusInterfaceHSIC::prepareForWoW(): Sending disconnect command..
Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLANBusInterfaceHSIC::sendDisconnectCommand()
Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOff(): Associated & WoW enabled, WiFi will remain up
Nov 14 12:07:29 unknown kernel[0] <Debug>: virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 0 swapBusy: 0 fController: 0 -> 0
Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleEmbeddedUSBArbitrator::setPowerState: calling handleUSBCableTypeChange from setPowerState
Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBCableDisconnect
Nov 14 12:07:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateDidChangeToGated(): stateNum 0, pol 0x81609000 (this 0, provider 1)
Nov 14 12:07:29 unknown kernel[0] <Debug>:
Nov 14 12:09:05 unknown CommCenter[17] <Notice>: Telling CSI to exit low power.
Nov 14 12:09:05 unknown kernel[0] <Debug>: pmu wake events: wlan
Nov 14 12:09:05 unknown kernel[0] <Debug>: virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 1 swapBusy: 0 fController: 0 -> 0
Nov 14 12:09:05 unknown kernel[0] <Debug>: AppleEmbeddedUSBArbitrator::setPowerState: calling handleUSBCableTypeChange from setPowerState
Nov 14 12:09:05 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBCableDisconnect
Nov 14 12:09:05 unknown kernel[0] <Debug>: AppleSynopsysUSBEHCI[0xc143bc00]::UIMInitialize - HSIC ports enabled
Nov 14 12:09:05 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateWillChangeToGated(): cap 0x8000, stateNum 1, dev 0x81609000 (this 0, provider 1)
Nov 14 12:09:05 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateDidChangeToGated(): stateNum 1, pol 0x81609000 (this 0, provider 1)
Nov 14 12:09:05 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateDidChangeToGated(): No fBus, deferring reconnect bus...
Nov 14 12:09:05 unknown kernel[0] <Debug>: AppleD1881PMUPowerSource: AppleUSBCableDetect 0
Nov 14 12:09:05 unknown kernel[0] <Debug>: AppleD1881PMUPowerSource: AppleUSBCableType Detached
Nov 14 12:09:05 unknown kernel[0] <Debug>: AppleBaseband::resetDetectInterrupt with 0
Nov 14 12:09:05 unknown CLTM[12] <Error>: CLTM: resetting temps: now = 1321290545, last update = 1321290444
Nov 14 12:09:05 unknown timed[2618] <Notice>: (Note ) CoreTime: Received network time zone "NITZ" with 342983343.00 -300 NO DST in 310
Nov 14 12:09:05 unknown timed[2618] <Notice>: (Note ) CoreTime: Searching in NO DST time zone map for offset -300 and MCC 310
Nov 14 12:09:05 unknown timed[2618] <Notice>: (Note ) CoreTime: Received timezone "America/New_York" from "NITZ"
Nov 14 12:09:05 unknown timed[2618] <Notice>: (Note ) CoreTime: Not setting time zone to America/New_York from NITZ
Nov 14 12:09:05 unknown MobileMail[79] <Warning>: message data temporarily unavailable for messageInfo: (1199, 5)
Nov 14 12:09:06 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOnSystem() : Powering On
Nov 14 12:09:06 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOn(): stateFlags(24823)
Nov 14 12:09:06 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOn(): Tearing down WoW mode
Nov 14 12:09:06 unknown kernel[0] <Debug>: [95599.463363125]: AppleBCMWLANCore::systemWokenByWiFi(): Wake reason = wlan
Nov 14 12:09:06 unknown kernel[0] <Debug>: AppleBCMWLANCore::handleDataPacket(): Wake up packet received: Data
Nov 14 12:09:06 unknown kernel[0] <Debug>: Wakeup Packet: f0cba106a30c0050568952630800450001793a52400080063c29c0a80012c0a801a101bbccfffd1 21b7bd29b0c2c8018fe27ac9b00000101080a1785f7b13ca56e6f17030101403431c2351e7ee3052 e97886a25233433f1f1457a3c8b132c78c218cd508942bce0325b156c8c17222ab30cb4a99331401 b1d1bc0f1c4b8b21752b218d068570e097065786e60062250a26d351e541f5c291e6220cc053b5fd baa2d7abdbe7224eff815b5154dcb783dce8cd9a00a6da15cf4f5565355a80894f1d68cff527f54b 7ad7423fb8f39093a0ef40acf9c2de6eeb492f8f8ae20bd73b61b3a1b2df30cb982b941217fe8a34 08e01045804dc254da191d4b1f3a9d1cea7b9d192e61eda2473aed4a48f6c178c765b1f82c166521 e22a3a408893216761fa77b9388bcec9b2b8cd519ac9c8b053c00889c95b8003420dbb4561300eaf 6f6a59675db183260039f62eed7afb348d9fb3147238e116ad6ac4f1ebf5b22ee99b1cb92a5c3fb3 d43c25db5bfc761ea0feda538b53bedbaa0f948ac7c63f41822a8c5f882b400 (391 bytes)
Nov 14 12:09:06 unknown kernel[0] <Debug>: AppleBCMWLAN Woke on same BSS: @ 0xc1b50c00, BSSID = 5c:d9:98:02:9a:40, rssi = -47, rate = 54 (100%), channel = 7, encryption = 0xc, ap = 1, failures =   0, age = 2499, ssid[ 9] = "CMSFLWLAN"
Nov 14 12:09:06 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled the '!ICMP' packet filter
Nov 14 12:09:06 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled the '!ICMP' packet filter
Nov 14 12:09:06 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled packet filters
Nov 14 12:09:06 unknown kernel[0] <Debug>: en0: BSSID changed to 5c:d9:98:02:9a:40
Nov 14 12:09:06 unknown lockdownd[22] <Error>: 00386000 handle_watcher_service_start: Got a service sock 13 for hostID 30225B68-00D2-49E3-AE4A-38D7AA7B605B
Nov 14 12:09:08 unknown timed[2618] <Notice>: (Note ) CoreTime: Want active time in 34.48hrs. Need active time in 117.81hrs.
Nov 14 12:09:09 unknown MobileMail[79] <Warning>: message data temporarily unavailable for messageInfo: (1199, 5)
Nov 14 12:09:18 unknown timed[2618] <Notice>: (Note ) CoreTime: Not setting system time to 11/14/2011 17:09:19 from GPS because time is unchanged
Nov 14 12:09:23 unknown CommCenter[17] <Notice>: Telling CSI to go low power.
Nov 14 12:09:25 unknown lockdownd[22] <Error>: 0173b000 __handle_watcher_service_start_block_invoke_1: Stopping heartbeat service for host 30225B68-00D2-49E3-AE4A-38D7AA7B605B
Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateWillChangeToGated(): cap 0x8000, stateNum 0, dev 0x81609000 (this 0, provider 1)
Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOffSystem() : Powering Off and sleeping
Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOff(): fStateFlags(34822)
Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Unicast IP filter enabled
Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled WOMP filter 0 (ID=103)
Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled WOMP filter 1 (ID=104)
Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled the '!ICMP' packet filter
Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLAN Sleeping on BSS:   @ 0xc1b50c00, BSSID = 5c:d9:98:02:9a:40, rssi = -50, rate = 54 (100%), channel = 7, encryption = 0xc, ap = 1, failures =   0, age = 2523, ssid[ 9] = "CMSFLWLAN"
Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLANBusInterfaceHSIC::prepareForWoW(): Sending disconnect command..
Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLANBusInterfaceHSIC::sendDisconnectCommand()
Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOff(): Associated & WoW enabled, WiFi will remain up
Nov 14 12:09:29 unknown kernel[0] <Debug>: virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 0 swapBusy: 0 fController: 0 -> 0
Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleEmbeddedUSBArbitrator::setPowerState: calling handleUSBCableTypeChange from setPowerState
Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBCableDisconnect
Nov 14 12:09:29 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateDidChangeToGated(): stateNum 0, pol 0x81609000 (this 0, provider 1)
Nov 14 12:09:29 unknown kernel[0] <Debug>:
Nov 14 12:11:25 unknown kernel[0] <Debug>: pmu wake events: menu
Nov 14 12:11:25 unknown CommCenter[17] <Notice>: Telling CSI to exit low power.
Nov 14 12:11:25 unknown SpringBoard[15] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
Nov 14 12:11:25 unknown SpringBoard[15] <Notice>: MultitouchHID: detection mode: 255->3 (deferring until bootloaded)
Nov 14 12:11:25 unknown SpringBoard[15] <Notice>: MultitouchHID: device bootloaded
Nov 14 12:11:25 unknown SpringBoard[15] <Notice>: MultitouchHID: detection mode: 3->3
Nov 14 12:11:25 unknown CLTM[12] <Error>: CLTM: resetting temps: now = 1321290685, last update = 1321290564
Nov 14 12:11:25 unknown timed[2619] <Notice>: (Note ) CoreTime: Received network time zone "NITZ" with 342983483.00 -300 NO DST in 310
Nov 14 12:11:25 unknown timed[2619] <Notice>: (Note ) CoreTime: Searching in NO DST time zone map for offset -300 and MCC 310
Nov 14 12:11:25 unknown timed[2619] <Notice>: (Note ) CoreTime: Received timezone "America/New_York" from "NITZ"
Nov 14 12:11:25 unknown timed[2619] <Notice>: (Note ) CoreTime: Not setting time zone to America/New_York from NITZ
Nov 14 12:11:26 unknown kernel[0] <Debug>: virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 1 swapBusy: 0 fController: 0 -> 0
Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleEmbeddedUSBArbitrator::setPowerState: calling handleUSBCableTypeChange from setPowerState
Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBCableDisconnect
Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleSynopsysUSBEHCI[0xc143bc00]::UIMInitialize - HSIC ports enabled
Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateWillChangeToGated(): cap 0x8000, stateNum 1, dev 0x81609000 (this 0, provider 1)
Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateDidChangeToGated(): stateNum 1, pol 0x81609000 (this 0, provider 1)
Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateDidChangeToGated(): No fBus, deferring reconnect bus...
Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleD1881PMUPowerSource: AppleUSBCableDetect 0
Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleD1881PMUPowerSource: AppleUSBCableType Detached
Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleBaseband::resetDetectInterrupt with 0
Nov 14 12:11:26 unknown kernel[0] <Debug>: set_crc_notification_state 0
Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOnSystem() : Powering On
Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOn(): stateFlags(24823)
Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOn(): Tearing down WoW mode
Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleBCMWLAN Woke on same BSS: @ 0xc1b50c00, BSSID = 5c:d9:98:02:9a:40, rssi = -48, rate = 54 (100%), channel = 7, encryption = 0xc, ap = 1, failures =   0, age = 2524, ssid[ 9] = "CMSFLWLAN"
Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled the '!ICMP' packet filter
Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled the '!ICMP' packet filter
Nov 14 12:11:26 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled packet filters
Nov 14 12:11:26 unknown kernel[0] <Debug>: en0: BSSID changed to 5c:d9:98:02:9a:40
Nov 14 12:11:27 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-11-14 12:11:17 -0500. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
Nov 14 12:11:27 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-11-14 12:11:17 -0500. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
Nov 14 12:11:27 unknown lockdownd[22] <Error>: 016b9000 handle_watcher_service_start: Got a service sock 13 for hostID 30225B68-00D2-49E3-AE4A-38D7AA7B605B
Nov 14 12:11:28 unknown kernel[0] <Debug>: AppleKeyStore:cp_key_store_action(1)
Nov 14 12:11:28 unknown kernel[0] <Debug>: AppleKeyStore:Sending lock change
Nov 14 12:11:28 unknown timed[2619] <Notice>: (Note ) CoreTime: Want active time in 34.44hrs. Need active time in 117.78hrs.
Nov 14 12:11:29 unknown configd[14] <Notice>: network configuration changed.
Nov 14 12:11:29 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-11-14 12:11:17 -0500. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
Nov 14 12:11:30 unknown CommCenter[17] <Notice>: No more assertions for PDP context 0. Returning it back to normal.
Nov 14 12:11:30 unknown CommCenter[17] <Notice>: Scheduling PDP tear down timer for (342983790.026476) (current time == 342983490.026488)
Nov 14 12:11:30 unknown wifid[29] <Error>: WiFi:[342983490.109759]: Client dataaccessd set type to background application
Nov 14 12:11:31 unknown dataaccessd[54] <Notice>: 1127d0|CalDAV|Error|Could not find the current user principal. Found properties: [{
              "DAV::displayname" = "[<CoreDAVLeafItem: 0xdea1ae0>]: DAV:displayname";
              "DAV::principal-URL" = "[[<CoreDAVItemWithHrefChildItem: 0xf1b79b0>]: DAV:principal-URL]
HREF: [[[<CoreDAVHrefItem: 0xdeb4b30>]: DAV:href]
Payload as original URL: [/calendar/dav/[email protected]/user/]
Payload as full URL: [https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/]
Base URL: [https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/]]";
              "urn:ietf:params:xml:ns:caldav:calendar-home-set" = "[[<CoreDAVItemWithHrefChildren: 0xf1b6f30>]: urn:ietf:params:xml:ns:caldavcalendar-home-set]
Number of HREFs: [1]
Unauthenticated: [(null)]";
              "urn:ietf:params:xml:ns:caldav:calendar-user-address-set" = "[[<CoreDAVItemWithHrefChildren: 0xde8f6f0>]: urn:ietf:params:xml:ns:caldavcalendar-user-address-set]
Number of HREFs: [2]
Unauthenticated: [(null)]";
              "urn:ietf:params:xml:ns:caldav:schedule-inbox-URL" = "[[<CoreDAVItemWithHrefChildItem: 0xde755f0>]: urn:ietf:params:xml:ns:caldavschedule-inbox-URL]
HREF: [[[<CoreDAVHrefItem: 0xdeb4de0>]: DAV:href]
Payload as original URL: [/calendar/dav/anyoneemail.com/inbox/]
Payload as full URL: [https://[email protected]/calendar/dav/anyoneemail.com/inbox///[email protected]/calendar/dav/anyoneemail.com/inbox/]
Base URL: [https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/]]";
              "urn:ietf:params:xml:ns:caldav:schedule-outbox-URL" = "[[<CoreDAVItemWithHrefChildItem: 0xdeac3a0>]: urn:ietf:params:xml:ns:caldavschedule-outbox-URL]
HREF: [[[<CoreDAVHrefItem: 0xdeb7450>]: DAV:href]
Payload as original URL: [/calendar/dav/anyoneemail.com/outbox/]
Payload as full URL: [https://[email protected]/calendar/dav/anyoneemail.com/outbox///[email protected]/calendar/dav/anyoneemail.com/outbox/]
Base URL: [https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/]]";
Nov 14 12:11:32 unknown dataaccessd[54] <Notice>: 1127d0|CalDAV|Error|There were some failures changing properties, according to the following response: [[[<CoreDAVResponseItem: 0xf2dfd20>]: DAV:response | Number of HREFs: [1]| Status: [(null)]| Number of prop stats: [1]| Error: [(null)]| Response description: [(null)]| Location: [(null)]]].
Nov 14 12:11:34 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-11-14 12:11:19 -0500. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
Nov 14 12:11:38 unknown timed[2619] <Notice>: (Note ) CoreTime: Not setting system time to 11/14/2011 17:11:39 from GPS because time is unchanged
Nov 14 12:11:42 unknown wifid[29] <Error>: WiFi:[342983502.660924]: Client itunesstored is background application
Nov 14 12:12:29 unknown wifid[29] <Error>: WiFi:[342983549.925022]: Disable WoW requested by "apsd"
Nov 14 12:12:29 unknown wifid[29] <Error>: WiFi:[342983549.927995]: Disable WoW requested by "dataaccessd"
Nov 14 12:12:37 unknown SpringBoard[15] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=0
Nov 14 12:12:37 unknown SpringBoard[15] <Notice>: MultitouchHID: detection mode: 3->255
Nov 14 12:13:38 unknown profiled[2629] <Notice>: (Note ) profiled: Service starting...
Nov 14 12:13:38 unknown profiled[2629] <Notice>: (Note ) profiled: Locking device
Nov 14 12:13:39 unknown kernel[0] <Debug>: AppleKeyStore:Sending lock change
Nov 14 12:13:43 unknown CommCenter[17] <Notice>: Telling CSI to go low power.
Nov 14 12:13:44 unknown lockdownd[22] <Error>: 016b9000 __handle_watcher_service_start_block_invoke_1: Stopping heartbeat service for host 30225B68-00D2-49E3-AE4A-38D7AA7B605B
Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleKeyStore:timer fired
Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleKeyStore:cp_key_store_action(0)
Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleKeyStore:Removing timer
Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleKeyStore:Sending lock change
Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateWillChangeToGated(): cap 0x8000, stateNum 0, dev 0x81609000 (this 0, provider 1)
Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOffSystem() : Powering Off and sleeping
Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOff(): fStateFlags(34822)
Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Unicast IP filter enabled
Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled WOMP filter 0 (ID=103)
Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled WOMP filter 1 (ID=104)
Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedEntry(): Enabled the '!ICMP' packet filter
Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLAN Sleeping on BSS:   @ 0xc1b50c00, BSSID = 5c:d9:98:02:9a:40, rssi = -42, rate = 54 (100%), channel = 7, encryption = 0xc, ap = 1, failures =   0, age = 2667, ssid[ 9] = "CMSFLWLAN"
Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLANBusInterfaceHSIC::prepareForWoW(): Sending disconnect command..
Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLANBusInterfaceHSIC::sendDisconnectCommand()
Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOff(): Associated & WoW enabled, WiFi will remain up
Nov 14 12:13:48 unknown kernel[0] <Debug>: virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 0 swapBusy: 0 fController: 0 -> 0
Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleEmbeddedUSBArbitrator::setPowerState: calling handleUSBCableTypeChange from setPowerState
Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBCableDisconnect
Nov 14 12:13:48 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateDidChangeToGated(): stateNum 0, pol 0x81609000 (this 0, provider 1)
Nov 14 12:13:48 unknown kernel[0] <Debug>:
Nov 14 12:14:20 unknown CommCenter[17] <Notice>: Telling CSI to exit low power.
Nov 14 12:14:20 unknown SpringBoard[15] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
Nov 14 12:14:20 unknown kernel[0] <Debug>: pmu wake events: menu
Nov 14 12:14:20 unknown kernel[0] <Debug>: virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 1 swapBusy: 0 fController: 0 -> 0
Nov 14 12:14:20 unknown kernel[0] <Debug>: AppleEmbeddedUSBArbitrator::setPowerState: calling handleUSBCableTypeChange from setPowerState
Nov 14 12:14:20 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBCableDisconnect
Nov 14 12:14:20 unknown kernel[0] <Debug>: AppleSynopsysUSBEHCI[0xc199f000]::UIMInitialize - HSIC ports enabled
Nov 14 12:14:20 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateWillChangeToGated(): cap 0x8000, stateNum 1, dev 0x81609000 (this 0, provider 1)
Nov 14 12:14:20 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateDidChangeToGated(): stateNum 1, pol 0x81609000 (this 0, provider 1)
Nov 14 12:14:20 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerStateDidChangeToGated(): No fBus, deferring reconnect bus...
Nov 14 12:14:20 unknown SpringBoard[15] <Notice>: MultitouchHID: detection mode: 255->3 (deferring until bootloaded)
Nov 14 12:14:20 unknown SpringBoard[15] <Notice>: MultitouchHID: device bootloaded
Nov 14 12:14:20 unknown SpringBoard[15] <Notice>: MultitouchHID: detection mode: 3->3
Nov 14 12:14:20 unknown timed[2631] <Notice>: (Note ) CoreTime: Received network time zone "NITZ" with 342983659.00 -300 NO DST in 310
Nov 14 12:14:20 unknown timed[2631] <Notice>: (Note ) CoreTime: Searching in NO DST time zone map for offset -300 and MCC 310
Nov 14 12:14:20 unknown timed[2631] <Notice>: (Note ) CoreTime: Received timezone "America/New_York" from "NITZ"
Nov 14 12:14:20 unknown timed[2631] <Notice>: (Note ) CoreTime: Not setting time zone to America/New_York from NITZ
Nov 14 12:14:21 unknown kernel[0] <Debug>: AppleD1881PMUPowerSource: AppleUSBCableDetect 0
Nov 14 12:14:21 unknown kernel[0] <Debug>: AppleD1881PMUPowerSource: AppleUSBCableType Detached
Nov 14 12:14:21 unknown kernel[0] <Debug>: AppleBaseband::resetDetectInterrupt with 0
Nov 14 12:14:21 unknown kernel[0] <Debug>: set_crc_notification_state 0
Nov 14 12:14:21 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOnSystem() : Powering On
Nov 14 12:14:21 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOn(): stateFlags(24823)
Nov 14 12:14:21 unknown kernel[0] <Debug>: AppleBCMWLANCore::powerOn(): Tearing down WoW mode
Nov 14 12:14:21 unknown kernel[0] <Debug>: AppleBCMWLAN Woke on same BSS: @ 0xc1b50c00, BSSID = 5c:d9:98:02:9a:40, rssi = -40, rate = 54 (100%), channel = 7, encryption = 0xc, ap = 1, failures =   0, age = 2668, ssid[ 9] = "CMSFLWLAN"
Nov 14 12:14:21 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled the '!ICMP' packet filter
Nov 14 12:14:21 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled the '!ICMP' packet filter
Nov 14 12:14:21 unknown kernel[0] <Debug>: AppleBCMWLANCore::configureWoWAssociatedExit(): Disabled packet filters
Nov 14 12:14:21 unknown kernel[0] <Debug>: en0: BSSID changed to 5c:d9:98:02:9a:40
Nov 14 12:14:21 unknown lockdownd[22] <Error>: 016b9000 handle_watcher_service_start: Got a service sock 13 for hostID 30225B68-00D2-49E3-AE4A-38D7AA7B605B
Nov 14 12:14:22 unknown profiled[2629] <Notice>: (Note ) profiled: Device unlock notification received
Nov 14 12:14:23 unknown kernel[0] <Debug>: AppleKeyStore:cp_key_store_action(1)
Nov 14 12:14:23 unknown kernel[0] <Debug>: AppleKeyStore:Sending lock change
Nov 14 12:14:23 unknown timed[2631] <Notice>: (Note ) CoreTime: Want active time in 34.39hrs. Need active time in 117.73hrs.
Nov 14 12:14:33 unknown Preferences[1862] <Warning>: -[VPNConnectionStore reloadVPN]: The active VPN configuration has changed from to (null)
Nov 14 12:14:33 unknown timed[2631] <Notice>: (Note ) CoreTime: Not setting system time to 11/14/2011 17:14:34 from GPS because time is unchanged
Nov 14 12:14:34 unknown Preferences[1862] <Warning>: -[VPNBundleController _vpnConfigurationChanged:] (0x13d7b0:<VPNBundleController: 0x13d7b0>): _serviceCount(0), serviceCount(0), toggleInRootMenu(0), RootMenuItem(1)
Nov 14 12:14:34 unknown com.apple.misd[2635] <Notice>: allowing special port forwarding for test fixtures
Nov 14 12:14:41 unknown Preferences[1862] <Warning>: BTM: attaching to BTServer
Nov 14 12:14:41 unknown Preferences[1862] <Warning>: BTM: posting notification BluetoothAvailabilityChangedNotification
Nov 14 12:14:44 unknown Preferences[1862] <Warning>: Should show voicemail? YES
Nov 14 12:14:44 unknown Preferences[1862] <Warning>: Should show voicemail? YES
Nov 14 12:14:44 unknown Preferences[1862] <Warning>: Should show voicemail? YES
Nov 14 12:14:44 unknown Preferences[1862] <Warning>: Should show voicemail? YES
Nov 14 12:15:01 unknown CommCenter[17] <Notice>: removing received message 2147483663
Nov 14 12:15:22 unknown profiled[2629] <Notice>: (Note ) profiled: Idled.
Nov 14 12:15:22 unknown profiled[2629] <Notice>: (Note ) profiled: Service stopping.
Nov 14 12:15:38 unknown kernel[0] <Debug>: launchd[2643] Builtin profile: container2 (sandbox)
Nov 14 12:15:38 unknown kernel[0] <Debug>: launchd[2643] Container: /private/var/mobile/Applications/E45DB0BB-3802-413A-B858-D5EE2F5C8DFF [69] (sandbox)
Nov 14 12:15:38 unknown wifid[29] <Error>: WiFi:[342983738.764213]: Client itunesstored is background application
Nov 14 12:15:41 unknown UIKitApplication:com.apple.iBooks[0xdd89][2643] <Notice>: DictinaryServices: Dictionary cache was updated
Nov 14 12:19:40 unknown kernel[0] <Debug>: 096088.069853 hsic-baseband::portActionGated: start device 0x00020001 (bus 1 port 2) completed with 0xe00002ed, retrying in 50ms
Nov 14 12:20:50 unknown wifid[29] <Error>: WiFi:[342984050.417001]: Client dataaccessd set type to background application
Nov 14 12:21:11 unknown lockdownd[22] <Error>: 00386000 __handle_watcher_service_start_block_invoke_1: Stopping heartbeat service for host 30225B68-00D2-49E3-AE4A-38D7AA7B605B
Nov 14 12:21:11 unknown com.apple.mobile.lockdown[22] <Notice>: Could not shutdown SSL connection: -9806
Nov 14 12:21:53 unknown wifid[29] <Error>: WiFi:[342984113.211059]: Client itunesstored is background application
Nov 14 12:22:06 unknown dataaccessd[54] <Notice>: 1127d0|CalDAV|Error|connection died with error Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x1934d0 {NSErrorFailingURLStringKey=https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/, NSErrorFailingURLKey=https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x108be0 "The request timed out."} 0xde94790
Nov 14 12:22:06 unknown dataaccessd[54] <Notice>: 1127d0|CalDAV|Error|Error refreshing properties for account: Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x1934d0 {NSErrorFailingURLStringKey=https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/, NSErrorFailingURLKey=https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x108be0 "The request timed out."}
Nov 14 12:22:06 unknown dataaccessd[54] <Notice>: 1127d0|CalDAV|Warn |CalDAV refresh task failed wih error Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x1934d0 {NSErrorFailingURLStringKey=https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/, NSErrorFailingURLKey=https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x108be0 "The request timed out."}
Nov 14 12:22:06 unknown dataaccessd[54] <Notice>: 1127d0|CalDAV|Warn |==== CalDAV refresh FAILED for "email" (8B3B7412-5AB7-4636-85FC-0613452101C4): Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x1934d0 {NSErrorFailingURLStringKey=https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/, NSErrorFailingURLKey=https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x108be0 "The request timed out."}.
Nov 14 12:22:06 unknown dataaccessd[54] <Notice>: 1127d0|CalDAV|Error|CoreDAVPropFindTask failed: Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x1934d0 {NSErrorFailingURLStringKey=https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/, NSErrorFailingURLKey=https://[email protected]/calendar/dav/anyoneemail.com/user///[email protected]/calendar/dav/anyoneemail.com/user/, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x108be0 "The request timed out."}
Nov 14 12:23:24 unknown kernel[0] <Debug>: launchd[2659] Builtin profile: PasteBoard (sandbox)
Nov 14 12:23:25 unknown SpringBoard[15] <Notice>: MultitouchHID: detection mode: 3->1
Nov 14 12:23:25 unknown MobileSMS[117] <Error>: clip: empty path.
Nov 14 12:23:25 unknown UIKitApplication:com.apple.MobileSMS[0x1a48][117] <Notice>: Nov 14 12:23:25 users-iPhone MobileSMS[117] <Error>: clip: empty path.
Nov 14 12:23:26 unknown MobileMail[79] <Notice>: d65c270|EAS|Error|connection died with error Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0xd6ebe90 {NSErrorFailingURLStringKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSErrorFailingURLKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSLocalizedDescription=The request timed out., NSUnderlyingError=0xd6c7a50 "The request timed out."} 0x112d18d0
Nov 14 12:23:26 unknown MobileMail[79] <Notice>: d65c270|EAS|Error|ASMoveItemsTask failed: Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0xd6ebe90 {NSErrorFailingURLStringKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSErrorFailingURLKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSLocalizedDescription=The request timed out., NSUnderlyingError=0xd6c7a50 "The request timed out."}
Nov 14 12:23:29 unknown SpringBoard[15] <Notice>: MultitouchHID: detection mode: 1->3
Nov 14 12:23:29 unknown MobileSMS[117] <Warning>: Trying to remove already removed image
Nov 14 12:23:33 unknown MobileSMS[117] <Error>: CGAffineTransformInvert: singular matrix.
Nov 14 12:23:33 unknown UIKitApplication:com.apple.MobileSMS[0x1a48][117] <Notice>: Nov 14 12:23:33 users-iPhone MobileSMS[117] <Error>: CGAffineTransformInvert: singular matrix.
Nov 14 12:23:40 unknown imagent[49] <Warning>: [Warning] Async loading of bag failed: Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0xeeb64c0 {NSErrorFailingURLStringKey=http://init-p01md.apple.com/bag, NSErrorFailingURLKey=http://init-p01md.apple.com/bag, NSLocalizedDescription=The request timed out., NSUnderlyingError=0xee9e340 "The request timed out."}
Nov 14 12:23:40 unknown imagent[49] <Warning>: [Warning] Bag loading failed! Error (NSURLErrorDomain:-1001): The request timed out. http://init-p01md.apple.com/bag
Nov 14 12:23:45 unknown SpringBoard[15] <Notice>: Connection to the change hub got interrupted.
Nov 14 12:23:49 unknown wifid[29] <Error>: WiFi:[342984229.632067]: Client itunesstored is background application
Nov 14 12:24:28 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-11-14 12:24:18 -0500. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
Nov 14 12:24:29 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-11-14 12:24:18 -0500. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
Nov 14 12:24:29 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-11-14 12:24:18 -0500. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
Nov 14 12:24:31 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-11-14 12:24:18 -0500. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
Nov 14 12:24:31 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-11-14 12:24:21 -0500. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
Nov 14 12:24:31 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-11-14 12:24:21 -0500. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
Nov 14 12:24:36 unknown UserEventAgent[12] <Warning>: Unable to cancel system wake for 2011-11-14 12:24:21 -0500. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
Nov 14 12:24:47 unknown MobileMail[79] <Notice>: d65c270|EAS|Error|connection died with error Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x113bdf50 {NSErrorFailingURLStringKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSErrorFailingURLKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x113b5750 "The request timed out."} 0x1127a260
Nov 14 12:24:47 unknown MobileMail[79] <Notice>: d65c270|EAS|Error|ASMoveItemsTask failed: Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x113bdf50 {NSErrorFailingURLStringKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSErrorFailingURLKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x113b5750 "The request timed out."}
Nov 14 12:26:07 unknown MobileMail[79] <Notice>: d65c270|EAS|Error|connection died with error Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x2c7230 {NSErrorFailingURLStringKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSErrorFailingURLKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x2a0b10 "The request timed out."} 0x11257260
Nov 14 12:26:07 unknown MobileMail[79] <Notice>: d65c270|EAS|Error|ASMoveItemsTask failed: Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x2c7230 {NSErrorFailingURLStringKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSErrorFailingURLKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x2a0b10 "The request timed out."}
Nov 14 12:26:31 unknown imagent[49] <Warning>: [Warning] Async loading of bag failed: Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x19b500 {NSErrorFailingURLStringKey=http://init-p01md.apple.com/bag, NSErrorFailingURLKey=http://init-p01md.apple.com/bag, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x18d740 "The request timed out."}
Nov 14 12:26:31 unknown imagent[49] <Warning>: [Warning] Bag loading failed! Error (NSURLErrorDomain:-1001): The request timed out. http://init-p01md.apple.com/bag
Nov 14 12:31:45 unknown kernel[0] <Debug>: launchd[2681] Builtin profile: container (sandbox)
Nov 14 12:31:45 unknown kernel[0] <Debug>: launchd[2681] Container: /private/var/mobile/Applications/DD219E23-801C-44FF-A939-FC1E23D7B5CD [69] (sandbox)
Nov 14 12:31:48 unknown Ping[2681] <Warning>: WARNING: Using legacy cell layout due to delegate implementation of tableView:accessoryTypeForRowWithIndexPath: in <myping: 0x161090>. Please remove your implementation of this method and set the cell properties accessoryType and/or editingAccessoryType to move to the new cell layout behavior. This method will no longer be called in a future release.
Nov 14 12:31:49 unknown MobileMail[79] <Notice>: d65c270|EAS|Error|connection died with error Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x11344bc0 {NSErrorFailingURLStringKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSErrorFailingURLKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x113fb400 "The request timed out."} 0x2f3eb0
Nov 14 12:31:49 unknown MobileMail[79] <Notice>: d65c270|EAS|Error|ASMoveItemsTask failed: Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x11344bc0 {NSErrorFailingURLStringKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSErrorFailingURLKey=https://email.website.com/Microsoft-Server-ActiveSync?User=user&DeviceId=ApplC39 GKPU5DTDK&DeviceType=iPhone&Cmd=MoveItems, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x113fb400 "The request timed out."}
Nov 14 12:32:48 unknown SpringBoard[15] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=0
Nov 14 12:32:48 unknown SpringBoard[15] <Notice>: MultitouchHID: detection mode: 3->255
Nov 14 12:33:01 unknown SpringBoard[15] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
Nov 14 12:33:01 unknown SpringBoard[15] <Notice>: MultitouchHID: detection mode: 255->3 (deferring until bootloaded)
Nov 14 12:33:01 unknown SpringBoard[15] <Notice>: MultitouchHID: device bootloaded
Nov 14 12:33:01 unknown SpringBoard[15] <Notice>: MultitouchHID: detection mode: 3->3
Nov 14 12:33:02 unknown kernel[0] <Debug>: set_crc_notification_state 0
Nov 14 12:33:11 unknown com.apple.misd[2685] <Notice>: allowing special port forwarding for test fixtures
Nov 14 12:33:13 unknown profiled[2686] <Notice>: (Note ) profiled: Service starting...
Nov 14 12:33:13 unknown Preferences[1862] <Warning>: loadAPTableCellImages: loading images
Nov 14 12:33:15 unknown Preferences[1862] <Warning>: -[APSettingsController specifiers]: CMSFLWLAN: _canForget(1), _canSetAutoJoin(0), _canSetAutoLogin(0)
Nov 14 12:33:23 unknown kernel[0] <Debug>: AppleD1881PMUPowerSource: AppleUSBCableDetect 1
Nov 14 12:33:23 unknown kernel[0] <Debug>: AppleD1881PMUPowerSource: AppleUSBCableType USBHost
Nov 14 12:33:23 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBReset
Nov 14 12:33:23 unknown kernel[0] <Debug>: launchd[2688] Builtin profile: ptpd (sandbox)
Nov 14 12:33:23 unknown lockdownd[22] <Error>: libMobileGestalt copyMobileEquipmentIdentifier: No MEID in CT mobile equipment info dictionary - <CFBasicHash 0xfe164d0 [0x3fced630]>{type = mutable dict, count = 5,
          entries =>
                    1 : <CFString 0xfe2dc20 [0x3fced630]>{contents = "kCTMobileEquipmentInfoCurrentSubscriberId"} = <CFString 0xfe16770 [0x3fced630]>{contents = "310410438874235"}
                    2 : <CFString 0xfe1cd20 [0x3fced630]>{contents = "kCTMobileEquipmentInfoCurrentMobileId"} = <CFString 0xfe2cd90 [0x3fced630]>{contents = "012937000519404"}
                    4 : <CFString 0xfe2e1b0 [0x3fced630]>{contents = "kCTMobileEquipmentInfoICCID"} = <CFString 0xfe2e1e0 [0x3fced630]>{contents = "89014103254388742359"}
                    11 : <CFString 0xfe2d750 [0x3fced630]>{contents = "kCTMobileEquipmentInfoIMEI"} = <CFString 0xfe2cd90 [0x3fced630]>{contents = "012937000519404"}
                    12 : <CFString 0xfe2e280 [0x3fced630]>{contents = "kCTMobileEquipmentInfoIMSI"} = <CFString 0xfe16770 [0x3fced630]>{contents = "310410438874235"}
Nov 14 12:33:23 unknown lockdownd[22] <Error>: 00386000 copy_meid: MobileGestalt failed to provide an MEID but returned no error (?)
Nov 14 12:33:24 unknown atc[2690] <Warning>: Error: Connection invalid
Nov 14 12:33:28 unknown ptpd[2688] <Notice>: PTP interface has been activated at high speed.
Nov 14 12:33:37 unknown lockdownd[22] <Error>: 0173b000 special_case_get_domain: NN: checking BT MAC Address reported back f0:cb:a1:06:a3:0d
Nov 14 12:33:38 users-iPhone mc_mobile_tunnel[2700] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
Nov 14 12:33:38 users-iPhone mc_mobile_tunnel[2700] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.

*228 option 2 might work. All phones can be different.

PDP connection error when not on wi-fi

This has probably been asked elsewhere so sorry in advance if it has!! Since leaving the house this morning (I use wifi at home) I've had "no network connection" even though I have full 3G signal! I've tried the hard reset & reset from the settings, I've turned my
mobile data off & back on again but nothing's changed, checked with my network provider (EE) who said its not my network and
to go to the apple store which I have but they can't see me until tomorrow. I have seen other people post about this on here but in there case the hard reset seems
to have resolved it but this isn't working for me! It's also coming up with the pdp connection error message when using safari.
Thank you in advance! Nikki.

Hi Fordyy88,
I'm sorry you are having issues connecting to the internet through your 3G network.
It appears from the error message that the issue is with your Carrier. See below:
iOS: Error message when trying to use a custom Access Point Name (APN)
Symptoms
When activating 3G service on an iOS device using a custom Access Point Name (APN), the error message "Could not activate cellular data network: PDP authentication failure" may appear.
Below are troubleshooting steps you can try on your own before seeing the Genius tomorrow:
iPhone: Troubleshooting a cellular data connection
Symptoms
This article will help you troubleshoot the following cellular data issues on your iPhone:
No connection over cellular network, but works over Wi-Fi
Resolution
Follow the instructions below for assistance with troubleshooting cellular data issues on your iPhone. After performing each step, please test to see if the issue is resolved.
Toggle airplane mode: Tap Settings, turn airplane mode on, wait three seconds, and then turn off again.
Restart your iPhone.
Ensure that your software is up to date:
Check for a Carrier Settings Update. Tap Settings > General > About.
Check for an iOS Software Update. Tap Settings > General > Software Update.
Note: Some updates may require a Wi-Fi connection.
Remove the SIM Card and reinsert it. Allow the iPhone to acquire the network again.
If your SIM card has SIM PIN enabled, try toggling it off: Tap Settings > Phone > SIM PIN.
Try another location. If a different location works, but the original location still does not, contact your carrier to report the issue.
Reset network settings: Tap Settings > General > Reset > Reset Network Settings.
Restore the iPhone as new.
Contact your carrier to:
Verify that the iPhone is properly set up on the account with the appropriate, current data plan.
Verify that there are no account-related blocks.
Find out if there are specific error messages in the carrier logs that could help determine why the issue is occurring.
If none of the above steps resolves the issue, contact your carrier, make an appointment at an Apple Retail Store, o rcontact AppleCare to troubleshoot further.
I hope you are back on track soon!
- Judy

PDP Error for only for Service Item

Hi Guys,
We are on SRM 5.5 with ECC6.0 in Classic Mode and trying to create a PO in ECC.
We are facing a unique issue. We have maintained all the required settings for material as well as
services. When a material is transferred to SoCo and assigned a vendor it creats a PO in ECC. But when we are transferring service, the PO does not get created.
The error in RZ20 (backend error) shows error "Enter Material Group" although material group is present in the SC and replicated from ECC to SRM and can be seen in Comm_hierarchy
Issue is unique coz of following results.
1. ECC PR - Free Text Item -> acc *** cat - k -> P grp 200 -> Material Grp X ->
    Item Cat D -
    PR sent to SRM to SOCO and create PO FAILS
2. ECC PR - Free Text Item -> acc *** cat - k -> P grp 200 -> Material Grp X ->
    Item Cat "Blank" -
    PR sent to SRM to SOCO and create PO SUCCESS
3. SRM SHC - Free Text Item -> acc *** cat - k -> P grp 200 -> Material Grp X ->
    Item Cat D -
    PR sent to SRM to SOCO and create PO SUCCESS
Hence for the same set of data the Material PR creates a PO but Not Service. Also for the same service data the SRM SHC also creates a PO.
Only the PDP service PR fails. Any views why? is there any specific settings for Service in PDP?
We have replicated the masters and groups properly.
Thanks & Regards

Hi Experts,
I have noticed the following difference when the ext req for Material (which creates PO) and Service (which fails) are compared in BBP PD
1. The field EXT_DEM_POSID (External Requirement Tracking Number) in Table BBP_PDIGP for service shows the value as 000100000000010 whereas for material it shows value 00010. That means the details in SOCO under follow on documents tab shows external requirement number for service as xxxxxxxxx/1000000 (probably last 5 digits truncated) wheras for material it shows xxxxxxxxx/10.
Is this standard or this is an error. Can this be linked to my original issue.
2. The field BE_OBJ_ITEM in table BBP_PDBEI for the failed service PO is blank whaereas for material it takes the value 00010.
What is the importance of this field?
Apart from this I have also found a note in which corrections are delivered for SRM 550 patch level 11 which is our current patch level. That means these corrections are already present in our system. The program code says.
reference to BE purchase requistion
IF is_item-ext_demid IS NOT INITIAL AND
    is_item-ext_dem_posid IS NOT INITIAL.
    mc_assign_x ls_be_item preq_no    is_item-ext_demid.
    mc_assign_x ls_be_item preq_item is_item-ext_dem_posid(5).
when service item, remove mat_grp in extreq scenario
    because it can differ from original purch. req. item
    IF is_item-product_type = c_ptype_service.
      CLEAR ls_be_item-matl_group.
    ENDIF.
This clearly says when service item, remove mat_grp in extreq scenario and that is what our problem is. The error is basically for "Enter material Group".
Kindly let me know whats your opinion or resolution.
Thanks
Hussain

Project Online Time Zone Settings Issues

We just start use Project Online for our project management. We set the SharePoint Online > Site Settings >
Regional Settings to "(UTC +08:00) Kuala Lumpur, Singapore" and we are confirm that our host located either in Singapore or Hong Kong. However, we found that the date and time display in the check-out/in
project message, in the PDP-Workflow Status page, task submission, and the Administration Settings that has time references are different with our timezone.
We sent Service Request to Microsoft Support and we been advised to wait for the next version of Project Online. To avoid the confuse happen to our Project Team, we have to set the Regional Settings back to "(UTC -08:00) Pacific Time (US and
Canada)". However, this is 16 hours different
in our region!
We all know that time is very important in a project management and reporting. We have >30 on-going projects in the Project Online and some of them are estimate to take years to complete.
Therefore, anybody faced this issue and appreciate it if you could give us any advice or sharing any workaround here. Thank you in advance.

Hi Paul,
Is the timezone mismatch only present in the checkout/check-in notification displayed on the PDPs?
Thanks,
Roland
Hi Roland,
I noticed it happen in:-
"Entry Date" and "Completion Date" for PDP - WorkflowStageStatus in the All Workflow Stage list. (if you are using Enterprise Project)
Check-out/Check-in notification displayed in PDP - Schedule, and some columns' datetime value in the Schedule.
Synchronization date and time that displayed in PWA Settings - Manage User Sync Settings. (if you are using Project Permission Mode)
Task Submission date and time.
~Kim

Schedule pdp page blank with no Security Alert

Hi,
in all projects, in the Schedule Page i have only a blank pdp page (i didn't edit the page) and i had the test with a User in the group Administrator (also there aren't permission alert).
Can you suggest me something to fix this issue?

This is the log about the issue i think:
Daniele, ClaimsCount=26 264c689c-436f-e0c5-e41f-37818f1dbe71
01/08/2014 17:00:40.70 w3wp.exe (0x1544)                        0x0300 SharePoint Foundation
Files                          00000 High     UserAgent not available, file operations may not be optimized.
at Microsoft.SharePoint.SPFileStreamManager.CreateCobaltStreamContainer(SPFileStreamStore spfs, ILockBytes ilb, Boolean copyOnFirstWrite, Boolean disposeIlb)     at Microsoft.SharePoint.SPFileStreamManager.SetInputLockBytes(SPFileInfo&
fileInfo, SqlSession session, PrefetchResult prefetchResult)     at Microsoft.SharePoint.CoordinatedStreamBuffer.SPCoordinatedStreamBufferFactory.CreateFromDocumentRowset(Guid databaseId, SqlSession session, SPFileStreamManager spfstm,
Object[] metadataRow, SPRowset contentRowset, SPDocumentBindRequest& dbreq, SPDocumentBindResults& dbres)     at Microsoft.SharePoint.SPSqlClient.GetDocumentContentRow(Int32 rowOrd, Object ospFileStmMgr, SPDocumentBindRequest&
dbreq, SPDocumentBindResults& dbres... 264c689c-436f-e0c5-e41f-37818f1dbe71
01/08/2014 17:00:40.70* w3wp.exe (0x1544)                        0x0300 SharePoint Foundation
Files                          00000 High     ...)     at Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String
bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean&
pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object&
pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel,
UInt64& ppermMask, ... 264c689c-436f-e0c5-e41f-37818f1dbe71
01/08/2014 17:00:40.70* w3wp.exe (0x1544)                        0x0300 SharePoint Foundation
Files                          00000 High     ...Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies,
Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId)     at Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte
bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument,
Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object& pvarMetaData, Object&
pvarMultipleMeetingDoclibRootFolders, String& pbst... 264c689c-436f-e0c5-e41f-37818f1dbe71
01/08/2014 17:00:40.70* w3wp.exe (0x1544)                        0x0300 SharePoint Foundation
Files                          00000 High     ...rRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId,
UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String&
pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId)     at Microsoft.SharePoint.Library.SPRequest.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl,
Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String&
pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion,... 264c689c-436f-e0c5-e41f-37818f1dbe71
01/08/2014 17:00:40.70* w3wp.exe (0x1544)                        0x0300 SharePoint Foundation
Files                          00000 High     ... String& pbstrTimeLastModified, String& pbstrContent,
UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied,
Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId)
at Microsoft.SharePoint.SPWeb.GetWebPartPageContent(Uri pageUrl, Int32 pageVersion, PageView requestedView, HttpContext context, Boolean forRender, Boolean includeHidden, Boolean mainFileRequest, Boolean fetchDependencyInformation, Boolean& ghostedPage,
String& siteRoot, Guid& siteId, Int64& bytes, ... 264c689c-436f-e0c5-e41f-37818f1dbe71
01/08/2014 17:00:40.70* w3wp.exe (0x1544)                        0x0300 SharePoint Foundation
Files                          00000 High     ...Guid& docId, UInt32& docVersion, String& timeLastModified,
Byte& level, Object& buildDependencySetData, UInt32& dependencyCount, Object& buildDependencies, SPWebPartCollectionInitialState& initialState, Object& oMultipleMeetingDoclibRootFolders, String& redirectUrl, Boolean& ObjectIsList,
Guid& listId)     at Microsoft.SharePoint.ApplicationRuntime.SPRequestModuleData.FetchWebPartPageInformationForInit(HttpContext context, SPWeb spweb, Boolean mainFileRequest, String path, Boolean impersonate, Boolean& isAppWeb,
Boolean& fGhostedPage, Guid& docId, UInt32& docVersion, String& timeLastModified, SPFileLevel& spLevel, String& masterPageUrl, String& customMasterPageUrl, String& webUrl, String& siteUrl, Guid& siteId, Object& buildDependencySetData,
SPWebPartCollectionInitialState& initialState, ... 264c689c-436f-e0c5-e41f-37818f1dbe71
01/08/2014 17:00:40.70* w3wp.exe (0x1544)                        0x0300 SharePoint Foundation
Files                          00000 High     ...String& siteRoot, String& redirectUrl, Object& oMultipleMeetingDoclibRootFolders,
Boolean& objectIsList, Guid& listId, Int64& bytes)     at Microsoft.SharePoint.ApplicationRuntime.SPRequestModuleData.GetFileForRequest(HttpContext context, SPWeb web, Boolean exclusion, String virtualPath)
at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.InitContextWeb(HttpContext context, SPWeb web)     at Microsoft.SharePoint.WebControls.SPControl.SPWebEnsureSPControl(HttpContext context)     at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.GetContextWeb(HttpContext
context)     at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.PostResolveRequestCacheHandler(Object oSender, EventArgs ea)     at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IEx...
264c689c-436f-e0c5-e41f-37818f1dbe71
01/08/2014 17:00:40.70* w3wp.exe (0x1544)                        0x0300 SharePoint Foundation
Files                          00000 High     ...ecutionStep.Execute()     at System.Web.HttpApplication.ExecuteStep(IExecutionStep
step, Boolean& completedSynchronously)     at System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error)     at System.Web..
Can this help?

PDP Issue

Similar Messages

Maybe you are looking for