Performance Point 2007. Filter seems to split query

Hi all,
I am having an issue with a performance point 2007 filter. It is based on a hierarchy of 4 levels. Total amount of records is under 500 (about 450) so i shouldnt have the filter limit issue.
However the filter is stopping about 3/4 the way through the list on our production server (QA and Dev are fine). I have looked for the filter limit in web config - cant find it on any server.
So I have run SQL profiler on the cube while running PP. I can see the queries come in and its splitting the filter query into two queries in exactly the point where we are seeing the missing data.
Any ideas why?
Many thanks
Dan

No the issues is still not resolved but I convienced my client to use alternate option which is SSRS Reports with MDX.
Even I tried the below configuration but issues not resolved
<system.serviceModel>
<client>
<commonBehaviors>
<behaviors>
<endpointBehaviors>
<dataContractSerializer MaxItemsInObjectGraph="2147483647" />
</endpointBehaviors>
</behaviors>
</commonBehaviors>
<endpoint
name="http"
contract="Microsoft.SharePoint.Taxonomy.IMetadataWebServiceApplication"
binding="customBinding"
bindingConfiguration="MetadataWebServiceHttpBinding" />
<endpoint
Regards,
adeel
Muhammad Adeel

Similar Messages

Performance Point Service Filter Reset on button click?

Hi.
Is it possible to reset the PPS filter on button click (Common "Reset" button).
Is it possible to do by using Javascript?
I need some work around to achieve it.
Thanks & Regards
Poomani Sankaran

Hi,
According to your post, my understanding is that you want to reset Performance Point Service Filter on button click.
You can follow the article
SharePoint Dashboard with Common Filters using PerformancePoint Services 2010 to create a dashboard with common filters using SharePoint PerformacePoint services 2010 and SQL Server Analysis Services (SSAS) Data Source.
Then you will see the filters on top of your dashboard. You can change the filters and see that both the reports are rendering the data as per your filter choice.
If you'd like to default the filter to a particular value on page load, you might want to try a JavaScript based approach:
Define the function 'NotifyBrowserOfAsyncUpdate(elem)', which PPS will call after any PPS render request completes (i.e., when your filter renders).
Within the function, check that elem.control exists and then check that elem.control.webPartTitle equals your filter's title.
If it does, search elem (the filter web part's main container DIV) for the actual filter control and change the value. If you're using a dropdown, this is pretty simple - just remember to call the 'onchange' method on the select as well so that connected
PPS objects refresh.
Here is a similar thread for your reference:
http://sharepoint.stackexchange.com/questions/61939/default-pps-filter-for-pps-dashboard-in-sharepoint-2010-not-showing
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Performance Point Cascading filter challange - Can it be done? If not, we need to change our BI front end!!

My challenge at the moment is that I need to create a dynamic filter. To explain this is a cascading filter but not your normal cascading filter,
ie, Year/Month/day etc.
Here we have a single Dimension, Organisation. It contains every level of a business,
Site,
Dept,
Company name,
Division
Holding
Strategic Area
From these as a default we have 4 built hierarchies with a different combination of the above.
Activity (Strategic Area, Dept)
Organisation (company Name, site, Dept)
Sites (Division, Site)
Holdings(Holding, Strategic Area, site, Dept)
At any given time we have have additional Hierarchies created within the Dimension, further adding to the hierarchy list.
We now have a challenge where we require our users to be able to in the first filter select the Hierarchy they want to use, ie, Holdings, Site, Organisation
or Activity. This should then cascade to the second filter and contain the relevant hierarchy and levels as a multi select filter. Of course this also needs to be connected to number of graphs, charts and scorecards on the page, dynamically.
I have gone around the houses to get this to work but not having any luck. Tried the variety of filters available, MDX, member selection, tabular,
SharePoint, and attempted to mix and match to get this to work. I cannot find a way but I don't believe this is not possible.
If it is not possible we must look around for another front end solution for our BI Dashboards which I would prefer to avoid. Any response or suggestion
would be much appreciated.
Regards,
Sheb

This is possible within PerformancePoint 2010. Filters can be cascading. There is one restriction that might affect you, and that is the cascade only works on the preceding level. For example, let's say you have 4 filters, Country, County, City, postcode,
that have been set up in PerformancePoint as cascading filters. Now when you choose a country, say United Kingdom, only Counties within the UK will be displayed. That's exactly as you could expect. However, now if you select Norfolk county, all the cities
with "Norfolk" county will be available. That's including the cities within "Norfolk" Massachusetts. This is because PerformancePoint cascading filters only work between two levels.
Here's a link to setting up cascading filters http://technet.microsoft.com/en-us/library/hh272541(v=office.15).aspx
Hope that information is useful to you and the cascade limitation doesn't limit you too much.
Richard

Performance Point Dashboard Designer filter and SSRS parameter problem

I've created reports in SSRS, with parameters, but can't get the filter in Performancepoint to have any affect on the SSRS parameter/reports. My SSRS reports are using shared datasets I've created, with no cubes. My SSRS parameter is text data type.
In the Dashboard Content window, I have the filter in the header, and have drug (at different times) the display value and the member unique name to the report.
In this header area (with filter), clicking the down arrow, there is no Edit Connection option. Should there be? Or would that only be to connect to a higher up filter? When clicking Create Connection, under the Items tab, 'get values from' lists header
and Date and is greyed out, I can put the report name in 'send values to', but under Connect To, there are no options. Why? And the OK button is greyed out.
In the report area, the filter name (Date) is listed underneath Connections. And right clicking the filter for this connection and clicking Edit Connection, under the Items tab, under 'get values from', it says header and Date, and under 'send values to',
zone 1 - and the report name is listed. Under the Values tab, the parameter name (DateNameParm) is listed in the Connect To, and I've tried both member unique name and display value for source value.
There's another thread on here titled "Performance Point - Dashboard Filter Not Working with SSRS Reporting Parameters" (won't let me post link), where someone here says they had to change the filter data type
from GUID, but I see no place to do this.

Hi Roberto,
Dashboard layout and sizing in PerformancePoint is very flexible. This article covers nearly all of the sizing options available, one basic dashboard page scenario and a few common questions.
http://blogs.msdn.com/b/performancepoint/archive/2008/01/07/performancepoint-dashboard-sizing-explained.aspx
Please go to the last question and answer: “filters are locked to auto-sizing,
so their width will override the size of their parent zone. Minimum filter width may be adjusted in the ParameterTree.css file. See the article
Working with the Monitoring CSS Files to Adjust Settings in Deployed Dashboards on the PerformancePoint team blog for more detail.”
As a best practice, put dashboard filters in a separate zone from where you put reports and scorecards. Otherwise, items such as chart legends or reports might not be displayed correctly.
Regards,
Rebecca Tu
TechNet Community Support

Performance point filter

Hello,
I have two create MDX Performance point filter which will gereate result set like from this query:
select {} on columns,
[abc].[family].CHILDREN
on rows
from
[Tr]
WHERE
{ [abc].[code].&[001], [MTR].[Code].&[002], [MTR].[Code].&[008], [MTR].[Code].&[010]}
Basically, I am trying to filter something like this: I does nt seem to work like this,
FILTER([abc].[family].CHILDREN,{ [abc].[code].&[001], [MTR].[Code].&[002], [MTR].[Code].&[008], [MTR].[Code].&[010]})

I figured it out. I was able to use OR operator in filter ()

Performance point Filter error : " There was a problem preparing the WebPart for display"

I’m going to create a performance point filter .I chose “Custom Table” type to select Project Name for my reports. I have some reports which have Project Name (ProjectUID as value) as parameter .So I’m going to create a filter based on Project Name (ProjectUID
as value) to use for all report. these are my settings:
Table: MSP_EpmProject_Userview
Key :ProjectUID
Parentkey: (none)
Display Value: ProjectName
Is default: (none)
But when I add these web part to my page I see this error:
“There was a problem preparing the WebPart for display.
Column 'ProjectName' does not allow nulls.”
I don’t know what should I do
is there any other wy to do this?

Hi,
I have a similar issue, did you manage to find a solution?

How to enable "SelectAll " in MultiSelect MDX filter in Performance Point Services 2010

Hi,
I have multi select MDX filter in Performance Point Services 2010. I need all the values of the filter to be selected by default. i.e when the page is loaded for the first time, all the values in the multi select filter should be selected.
Is there any property enabled for this? Any other solution can be achieved?
Kindly help.
Regards,
Mani

At least I haven't managed to alter the display value. It uses the member name directly.
The only thing that comes to mind is creating a user hierarchy, so that countries and states can be shown as a tree in the filter.

Performance Point Filter Scorecard by Time Dimension (without Time Intelligence)

Hello,
I use Performance Point 2010 and want to build a Performance Point Dashboard with Scorecard. My requirement is to provide a List of Years as a Filter for a Scorecard.
In the Scorecard I have a KPI which I want filter by Time Dimension. I can do this when I use "Time Intelligence" and "Time Intelligence Connection". But I want to use the "Member Selection Filter" to filter the Scorecard
KPIs by Years (Selected from a List).
I created a "Member Selection Filter" with certain Time Dimension and put Filter to a Dashboard. In my KPI Mapping Source I added a "new Dimension Filter" and choosed the same Time Dimension as
in the "Member Selection Filter".
When I try to connect the "Member Selection Filter" to my Scorecard, I can only choose the "Curent Date Time". As I know "Current Date Time" have to be used when Time Intelligence Filter is in use.
How I have to connect the Scorecard with the "Member Selection Filter"?
Thank you very much

Hi ShebUK,
I don't think we can achieve this requirement on the front end, but you can discuss this issue at the following forum:
http://social.technet.microsoft.com/Forums/en-US/home?category=performancepointserver
I'm not familiar with PerformancePoint Services and not sure that we can implement linked dimension to achieve this. A linked dimension is one that exists in one Analysis Services database, but reused in another Analysis Services database of the same version
and compatibility level. For more information, please see:
Define Linked Dimensions: http://msdn.microsoft.com/en-us/library/ms175648.aspx
Hope this helps.
Regards,
Elvis Long
TechNet Community Support

Performance Point - 1 Dashboard, 2 cubes, 1 Time intelligence filter, filtering 2 different date dimensions on different cubes!

Hi
Hope you are well.
I have a challenge. I am working with Performance Point and a number of different cubes.
In this case I need to include graphs and charts from 2 different cubes on one dashboard page.
The challenge I have, is to be able to use a Time Intelligence filter from one cube, eg, [TimeSold].[Calendar hierarchy] on Cube 1, and for this to filter graphs from the second cube (second cube [Time].[Calendar hierarchy]), on one dashboard page.
Is there any way I can achieve this using MDX or Parameters within performance point?
I cannot amend the cubes or dimensions. I have to work with the front end tools only.

Hi ShebUK,
I don't think we can achieve this requirement on the front end, but you can discuss this issue at the following forum:
http://social.technet.microsoft.com/Forums/en-US/home?category=performancepointserver
I'm not familiar with PerformancePoint Services and not sure that we can implement linked dimension to achieve this. A linked dimension is one that exists in one Analysis Services database, but reused in another Analysis Services database of the same version
and compatibility level. For more information, please see:
Define Linked Dimensions: http://msdn.microsoft.com/en-us/library/ms175648.aspx
Hope this helps.
Regards,
Elvis Long
TechNet Community Support

Performance Point - SharePoint 2010 cascading filter on Fields not in Hierarchy

Hi I am currently working on a performance point reporting in Sharepoint 2010 that reports on Analysis services database as source.
I know that we can create cascading filters in performance point with fields in a SSAS hierarchy. But I want to use fields not in hierarchy as cascading filters. Is it possible in anyway in PP in sharepoint 2010

Hi,
Thanks for your posting in this forum.
I have moved this thread in SQL Server Reporting Services, Power View forum for more dedicated support.
Thanks for your understanding.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Performance point dashboard slow in rendering

Hi,
we have some performancepoint dashboard deployed on SharePoint 2010. These dashboard access an olap cube and display some data from cube.
Sometimes rendering of dashboard is slow. Analyzing pages using developer dashboard we found that when rendering is slow we have a lot time spent in wcf calls to performancepoint services.
For instance we spent 30 seconds in one wcf method call to GetFilterDisplayData method.
If we run profiler in sql we don't see any query on analysis during these slow calls, so we assume there are some problems in wcf calls to PerformancePoint Service.
Also we looked to this article for applying some caching settings:
http://blogs.msdn.com/b/performancepoint/archive/2010/04/16/a-general-caching-overview-for-performance-point-services-for-sharepoint-2010.aspx
Pages' filters don't contain too much data except for time filter that is a multi select tree filter that contains all days from January 2010 until today.
Any suggestions?
Thanks!

lookalike MSFT know about this potential performance, i think you need WCF throttling.
WCF throttling settings
PerformancePoint Services is implemented as a WCF service. WCF limits the maximum number of concurrent calls as a service throttling behavior. Although long-running queries could hit this bottleneck, this is an
uncommon bottleneck. Monitor the WCF / Service Model performance counter calls outstanding for PerformancePoint Services and compare to the current maximum number of concurrent calls.
If needed, change the Windows Communication Foundation (WCF) throttling behavior. See the WCF
service throttling behaviors (http://go.microsoft.com/fwlink/p/?LinkId=200612) and Wenlong Dong’s blog post on WCF Request Throttling
and Server Scalability (http://go.microsoft.com/fwlink/p/?LinkId=200613).
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Performance Point

I have Performance Point configured and can open the Dashboard Designer. I also can correctly create a Data Source and select the Cube data base from the analysis instance.
However when I create Performance Point (Analytics Chart) I always see an error running data source Query. In the event logs I see
The Unattended Service Account "" does not have access to the cube "" or it no longer exists on the following data source server.
However I know the Cube has be built and has Admin permissions to the analysis instances. I have also provided the user full rights to the site.
What needs to be completed to ensure this functions?

I figured it out. I was able to use OR operator in filter ()

OR Condition in Filter area of a query.

Hi All,
I have a scenario, where i need to implement a condition where I need to put combination or AND and OR condition.
Its something like:
Employment status shd be 'Active' OR
Term date Shd be in cureent year AND
line of Business = '99' or '97'.
I was planning to put these conditions in Filter area of a query, but since there is no option for OR condition. Hw shd I go about implementing this.
Any suggestions are welcome.
Thanx.
Pooja.

Hi Pooja,
Multiple characteristics with value restriction corresponds to AND conditions and not OR Conditions.
Alternatively can create Formula on keyfigures which specifies all the conditions. Formula supports all logical ,mathematical,boolean operations.
Hope that helps.
Regards
Mr Kapadia
Assigning points is the way to say thanks in SDN.

Copy Performance Point lists between environments

Hello,
I would like to know if there is a way to copy paste Performance Point content lists and Data Connexion between 2 SharePoint 2013 environments (different farms)
Actually we use Dashboard Designer to create report, kpi, filter and Dashboard . We actually have many items in our production farm and would like to copy these elements into POC farm (same Active Directory, same Cube, OLAP)
Is it possible ? We already success to copy Performance Point content in the same farm between 2 differents web application or Site collection.
Best regards,

Hi arimaze,
How did you copy PerformancePoint content in the same farm?
Whether you try to use "Export Content" and "Import Content" ribbon button in PERFORMANCEPOINT ribbon. Please do a test, and let me know the result.
In addition, there are two articles about migrating PerformancePoint content, please check if they are useful for you:
http://denglishbi.wordpress.com/2010/11/20/migrating-performancepoint-2010-content-to-new-server/
http://blogs.msdn.com/b/performancepoint/archive/2012/08/03/what-s-new-in-performancepoint-services-2013.aspx (8.server-side migrate)
Best Regrads,
Wendy
Wendy Li
TechNet Community Support

Business Intelligence and performance point problem

Hi Everyone,
Please does anyone know why creating a dashboard from a Sharepoint list is such a hassle. I have configured performance point services, a secure store and a business intelligent website that has a data connection library and Performance Point content
list . Unfortunately anytime I try to use dashboard designer to create a new data source and specify the site settings(using unattended account method) I can't save it. It gives me an error claiming that I either don't have permissions or the data source
doesn't exist.
A search around the web for answers doesn't seems to solve my problem as it suggests that the problem is associate with many things which I'm not clear about. Please could someone who is good at this at least tell me the critical things to check and the
clearest way to set this up.
Thanks,
Dominic

Hi Dominic,
According to your error " I either don't have permissions or the data source doesn't exist", it should be related to the unattended account permission.
Once the unattended service account has been configured, you must grant that account access to your data sources:
For SQL Server data, the account must have a SQL logon with db_datareader permissions on each database that you want to access.
For SQL Server Analysis Services data, the account must have read access to the cube or an appropriate portion of the cube, depending on your needs.
For Excel Services data, the account must have access to the Excel workbook in a SharePoint document library.
For data in a SharePoint list, the account must have read access to the list.
Reference:
https://technet.microsoft.com/en-us/library/ee836145.aspx
Also you can have a look at the blog:
http://www.chrismcnulty.net/blog/Lists/Posts/Post.aspx?ID=74
https://yossidahan.wordpress.com/2012/08/14/cant-get-ssas-databases-to-appear-in-performance-point-dashboard-designer-check-you-adomd-net-version/
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Performance Point 2007. Filter seems to split query

Similar Messages

Maybe you are looking for