Performance Tuning in MD4C--Multilevel order

Dear All,
How to tune MD4C which displays the multilevel order in a list output.Here it is taking long time for execution and database usage is more.It can b done by copying it to a Z-Program?
Help me ASAP.

Run a ST05 trace on it and see if you need a new index.

Similar Messages

MD4C - Multilevel order report with a selection of production/process order

Hi Experts,
We have this request:
We need to check the availability check for different production orders, with multilevel mode, but the tcode MD4C accepts only one production order.
We have seen that we can actually use the same tcode with different sales orders.
Someone tell me if it is possible to change the screen on production orders or tell me which FM can be used in a Z report ?
Thanks in advance
Marco Ferrari

Dear Macro ,
Are you really particular on MD4C ?
I would rarher say there are good report in SAP standard , available to fullfill your requirement .Why do not you try the blelow report for your requrement :
1.COOIS
2.COHV
3.CO46
In COOIS -Choose Order Header and Select Collective availability check -Enter Order Type and Plant and hit execute button .
It will give you the result what you are looking for and also goto Header after execution -Select colourful chekcer box "Select Lay out " Change as you wish too with your required field information in display column
Hope this will be helpful
Try and revert
Regards
JH

Performance tuning for Sales Order and its configuration data extraction

I write here the data fetching subroutine of an extract report.
This report takes 2.5 hours to extract 36000 records in the quality server.
Kindly provide me some suggestions for performance tuning it.
    SELECT auart vkorg vtweg spart vkbur augru
              kunnr yxinsto bstdk vbeln kvgr1 kvgr2 vdatu
              gwldt audat knumv
              FROM vbak
              INTO TABLE it_vbak
              WHERE vbeln IN s_vbeln
              AND erdat IN s_erdat
              AND auart IN s_auart
              AND vkorg = p_vkorg
              AND spart IN s_spart
              AND vkbur IN s_vkbur
              AND vtweg IN s_vtweg.
IF NOT it_vbak[] IS INITIAL.
    SELECT mvgr1 mvgr2 mvgr3 mvgr4 mvgr5
           yyequnr vbeln cuobj
           FROM vbap
           INTO TABLE it_vbap
           FOR ALL ENTRIES IN it_vbak
           WHERE vbeln = it_vbak-vbeln
           AND   posnr = '000010'.
    SELECT bstkd inco1 zterm vbeln
           prsdt
           FROM vbkd
           INTO TABLE it_vbkd
           FOR ALL ENTRIES IN it_vbak
           WHERE vbeln = it_vbak-vbeln.
    SELECT kbetr kschl knumv
           FROM konv
           INTO TABLE it_konv
           FOR ALL ENTRIES IN it_vbak
           WHERE knumv = it_vbak-knumv
           AND   kschl = 'PN00'.
    SELECT vbeln parvw kunnr
           FROM vbpa
           INTO TABLE it_vbpa
           FOR ALL ENTRIES IN it_vbak
           WHERE vbeln = it_vbak-vbeln
           AND parvw IN ('PE', 'YU', 'RE').
ENDIF.
LOOP AT it_vbap INTO wa_vbap.
    IF NOT wa_vbap-cuobj IS INITIAL.
      CALL FUNCTION 'VC_I_GET_CONFIGURATION'
           EXPORTING
                instance            = wa_vbap-cuobj
                language            = sy-langu
           TABLES
                configuration       = it_config
           EXCEPTIONS
                instance_not_found = 1
                internal_error      = 2
                no_class_allocation = 3
                instance_not_valid = 4
                OTHERS              = 5.
      IF sy-subrc = 0.
        READ TABLE it_config WITH KEY atnam = 'IND_PRODUCT_LINES'.
        IF sy-subrc = 0.
          wa_char-obj = wa_vbap-cuobj.
          wa_char-atnam = it_config-atnam.
          wa_char-atwrt = it_config-atwrt.
          APPEND wa_char TO it_char.
          CLEAR wa_char.
        ENDIF.
        READ TABLE it_config WITH KEY atnam = 'IND_GQ'.
        IF sy-subrc = 0.
          wa_char-obj = wa_vbap-cuobj.
          wa_char-atnam = it_config-atnam.
          wa_char-atwrt = it_config-atwrt.
          APPEND wa_char TO it_char.
          CLEAR wa_char.
        ENDIF.
        READ TABLE it_config WITH KEY atnam = 'IND_VKN'.
        IF sy-subrc = 0.
          wa_char-obj = wa_vbap-cuobj.
          wa_char-atnam = it_config-atnam.
          wa_char-atwrt = it_config-atwrt.
          APPEND wa_char TO it_char.
          CLEAR wa_char.
        ENDIF.
        READ TABLE it_config WITH KEY atnam = 'IND_ZE'.
        IF sy-subrc = 0.
          wa_char-obj = wa_vbap-cuobj.
          wa_char-atnam = it_config-atnam.
          wa_char-atwrt = it_config-atwrt.
          APPEND wa_char TO it_char.
          CLEAR wa_char.
        ENDIF.
        READ TABLE it_config WITH KEY atnam = 'IND_HQ'.
        IF sy-subrc = 0.
          wa_char-obj = wa_vbap-cuobj.
          wa_char-atnam = it_config-atnam.
          wa_char-atwrt = it_config-atwrt.
          APPEND wa_char TO it_char.
          CLEAR wa_char.
        ENDIF.
    READ TABLE it_config WITH KEY atnam = 'IND_CALCULATED_INST_HOURS'.
        IF sy-subrc = 0.
          wa_char-obj = wa_vbap-cuobj.
          wa_char-atnam = it_config-atnam.
          wa_char-atwrt = it_config-atwrt.
          APPEND wa_char TO it_char.
          CLEAR wa_char.
        ENDIF.
      ENDIF.
    ENDIF.
ENDLOOP. " End of loop on it_vbap
Edited by: jaya rangwani on May 11, 2010 12:50 PM
Edited by: jaya rangwani on May 11, 2010 12:52 PM

Hello Jaya,
Will provide some point which will increase the performance of the program:
1.     VBAK & VBAP are header & item table. And so the relation will be 1 to many. In this case, you can use inner join instead multiple select statement.
2.     If you are very much confident in handling the inner join, then you can do a single statement to get the data from VBAK, VBAP & VBKD using the inner join.
3.     Before using for all entries, check whether the internal table is not initial.
And sort the internal table and delete adjacent duplicates.
4.     Sort all the resultant internal table based on the required key fields and read always using the binary search.
You will get a number of documents where you can get a fair idea of what should be done and what should not be while doing a program related to performance issue.
Also you can have number of function module and BAPI where you can get the sales order details. You can try with u2018BAPISDORDER_GETDETAILEDLISTu2019.
Regards,
Selva K.

Need clear steps for doing performance tuning on SQL Server 2008 R2 (DB Engine, Reporting Services and Integration Services)

We have to inverstigate about a reporting solution where things are getting slow (may be material, database design, network matters).
I have red a lot in MSDN and some books about performance tuning on SQL Server 2008 R2 (or other) but frankly, I feel a little lost in all that stuff
I'am looking for practical steps in order to do the tuning. Someone had like a recipe for that : a success story...
My (brain storm) Methodology should follow these steps:
Resource bottlenecks: CPU, memory, and I/O bottlenecks
tempdb bottlenecks
A slow-running user query : Missing indexes, statistics,...
Use performance counters : there are many, can one give us the list of the most important
how to do fine tuning about SQL Server configuration
SSRS, SSIS configuration ?
And do the recommandations.
Thanks
"there is no Royal Road to Mathematics, in other words, that I have only a very small head and must live with it..."
Edsger W. Dijkstra

Hello,
There is no clear defined step which can be categorized as step by step to performance tuning.Your first goal is to find out cause or drill down to factor causing slowness of SQL server it can be poorly written query ,missing indexes,outdated stats.RAM crunch
CPU crunch so on and so forth.
I generally refer to below doc for SQL server tuning
http://technet.microsoft.com/en-us/library/dd672789(v=sql.100).aspx
For SSIS tuning i refer below doc.
http://technet.microsoft.com/library/Cc966529#ECAA
http://msdn.microsoft.com/en-us/library/ms137622(v=sql.105).aspx
When I face issue i generally look at wait stats ,wait stats give you idea about on what resource query was waiting.
--By Jonathan KehayiasSELECT TOP 10
wait_type ,
max_wait_time_ms wait_time_ms ,
signal_wait_time_ms ,
wait_time_ms - signal_wait_time_ms AS resource_wait_time_ms ,
100.0 * wait_time_ms / SUM(wait_time_ms) OVER ( )
AS percent_total_waits ,
100.0 * signal_wait_time_ms / SUM(signal_wait_time_ms) OVER ( )
AS percent_total_signal_waits ,
100.0 * ( wait_time_ms - signal_wait_time_ms )
/ SUM(wait_time_ms) OVER ( ) AS percent_total_resource_waits
FROM sys.dm_os_wait_stats
WHERE wait_time_ms > 0 -- remove zero wait_time
AND wait_type NOT IN -- filter out additional irrelevant waits
( 'SLEEP_TASK', 'BROKER_TASK_STOP', 'BROKER_TO_FLUSH',
'SQLTRACE_BUFFER_FLUSH','CLR_AUTO_EVENT', 'CLR_MANUAL_EVENT',
'LAZYWRITER_SLEEP', 'SLEEP_SYSTEMTASK', 'SLEEP_BPOOL_FLUSH',
'BROKER_EVENTHANDLER', 'XE_DISPATCHER_WAIT', 'FT_IFTSHC_MUTEX',
'CHECKPOINT_QUEUE', 'FT_IFTS_SCHEDULER_IDLE_WAIT',
'BROKER_TRANSMITTER', 'FT_IFTSHC_MUTEX', 'KSOURCE_WAKEUP',
'LAZYWRITER_SLEEP', 'LOGMGR_QUEUE', 'ONDEMAND_TASK_QUEUE',
'REQUEST_FOR_DEADLOCK_SEARCH', 'XE_TIMER_EVENT', 'BAD_PAGE_PROCESS',
'DBMIRROR_EVENTS_QUEUE', 'BROKER_RECEIVE_WAITFOR',
'PREEMPTIVE_OS_GETPROCADDRESS', 'PREEMPTIVE_OS_AUTHENTICATIONOPS',
'WAITFOR', 'DISPATCHER_QUEUE_SEMAPHORE', 'XE_DISPATCHER_JOIN',
'RESOURCE_QUEUE' )
ORDER BY wait_time_ms DESC
use below link to analyze wait stats
http://www.sqlskills.com/blogs/paul/wait-statistics-or-please-tell-me-where-it-hurts/
HTH
PS: for reporting services you can post in SSRS forum
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Performance Tuning 10g

Hi All,
I had given a task to tune oracle 10g database. I am really new in memory tuning although I had some SQL Tuning earlier. My server is in remote location and I can not login to Enterprise Manager GUI. I will be using SQL Developer or PL/SQL Developer for this. My application is web based application.
I have following queries with this respect:
- How should I start... Should I use tkprof or AWR.
- How to enable these tools.
- How to view its reports
- What should I check in these reports
- Will just increasing RAM improves performance or should we also increase Hard Disk?
- What is CPU Cost and I/O?
Please help.
Thanks & Regards.

dbdan wrote:
Hi All,
I had given a task to tune oracle 10g database. I am really new in memory tuning although I had some SQL Tuning earlier. My server is in remote location and I can not login to Enterprise Manager GUI. I will be using SQL Developer or PL/SQL Developer for this. My application is web based application.
I have following queries with this respect:
- How should I start... Should I use tkprof or AWR.
- How to enable these tools.
- How to view its reports
- What should I check in these reports
- Will just increasing RAM improves performance or should we also increase Hard Disk?
- What is CPU Cost and I/O?
Please help.
Thanks & Regards.Here is something you might try as a starting point:
Capture the output of the following (to a table, send to Excel, or spool to a file):
SELECT
STAT_NAME,
VALUE
FROM
V$OSSTAT
ORDER BY
STAT_NAME;
SELECT
STAT_NAME,
VALUE
FROM
V$SYS_TIME_MODEL
ORDER BY
STAT_NAME;
SELECT
EVENT,
TOTAL_WAITS,
TOTAL_TIMEOUTS,
TIME_WAITED
FROM
V$SYSTEM_EVENT
WHERE
WAIT_CLASS != 'Idle'
ORDER BY
EVENT;Wait a known amount of time (5 minutes or 10 minutes)
Execute the above SQL statements again.
Subtract the starting values from the ending values, and post the results for any items where the difference is greater than 0. The Performance Tuning Guide (especially the 11g version) will help you understand what each item means.
To repeat what Ed stated, do not randomly change parameters (even if someone claims that they have successfully made the parameter change 100s of times).
You could also try a Statspack report, but it might be better to start with something which produces less than 70 pages of output.
Charles Hooper
IT Manager/Oracle DBA
K&M Machine-Fabricating, Inc.

Reg: Process Chain, query performance tuning steps

Hi All,
I come across a question like, There is a process chain of 20 processes.out of which 5 processes are completed at the 6th step error occured and it cannot be rectified. I should start the chain again from the 7th step.If i go to a prticular step i can do that particular step, How can i start the entair chain again from step 7.i know that i need to use a function module but i dont know the name of FM. Please somebody help me out.
Please let me know the steps involved in query performance tuning and aggregate tuning.
Thanks & Regards
Omkar.K

Hi,
Process Chain
Method 1 (when it fails in a step/request)
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
How is it possible to restart a process chain at a failed step/request?
Sometimes, it doesn't help to just set a request to green status in order to run the process chain from that step on to the end.
You need to set the failed request/step to green in the database as well as you need to raise the event that will force the process chain to run to the end from the next request/step on.
Therefore you need to open the messages of a failed step by right clicking on it and selecting 'display messages'.
In the opened popup click on the tab 'Chain'.
In a parallel session goto transaction se16 for table rspcprocesslog and display the entries with the following selections:
1. copy the variant from the popup to the variante of table rspcprocesslog
2. copy the instance from the popup to the instance of table rspcprocesslog
3. copy the start date from the popup to the batchdate of table rspcprocesslog
Press F8 to display the entries of table rspcprocesslog.
Now open another session and goto transaction se37. Enter RSPC_PROCESS_FINISH as the name of the function module and run the fm in test mode.
Now copy the entries of table rspcprocesslog to the input parameters of the function module like described as follows:
1. rspcprocesslog-log_id -> i_logid
2. rspcprocesslog-type -> i_type
3. rspcprocesslog-variante -> i_variant
4. rspcprocesslog-instance -> i_instance
5. enter 'G' for parameter i_state (sets the status to green).
Now press F8 to run the fm.
Now the actual process will be set to green and the following process in the chain will be started and the chain can run to the end.
Of course you can also set the state of a specific step in the chain to any other possible value like 'R' = ended with errors, 'F' = finished, 'X' = cancelled ....
Check out the value help on field rspcprocesslog-state in transaction se16 for the possible values.
Query performance tuning
General tips
Using aggregates and compression.
Using less and complex cell definitions if possible.
1. Avoid using too many nav. attr
2. Avoid RKF and CKF
3. Many chars in row.
By using T-codes ST03 or ST03N
Go to transaction ST03 > switch to expert mode > from left side menu > and there in system load history and distribution for a particual day > check query execution time.
/people/andreas.vogel/blog/2007/04/08/statistical-records-part-4-how-to-read-st03n-datasets-from-db-in-nw2004
/people/andreas.vogel/blog/2007/03/16/how-to-read-st03n-datasets-from-db
Try table rsddstats to get the statistics
Using cache memoery will decrease the loading time of the report.
Run reporting agent at night and sending results to email.This will ensure use of OLAP cache. So later report execution will retrieve the result faster from the OLAP cache.
Also try
1. Use different parameters in ST03 to see the two important parameters aggregation ratio and records transferred to F/E to DB selected.
2. Use the program SAP_INFOCUBE_DESIGNS (Performance of BW infocubes) to see the aggregation ratio for the cube. If the cube does not appear in the list of this report, try to run RSRV checks on the cube and aggregates.
Go to SE38 > Run the program SAP_INFOCUBE_DESIGNS
It will shown dimension Vs Fact tables Size in percent.If you mean speed of queries on a cube as performance metric of cube,measure query runtime.
3. --- sign is the valuation of the aggregate. You can say -3 is the valuation of the aggregate design and usage. ++ means that its compression is good and access is also more (in effect, performance is good). If you check its compression ratio, it must be good. -- means the compression ratio is not so good and access is also not so good (performance is not so good).The more is the positives...more is useful the aggregate and more it satisfies the number of queries. The greater the number of minus signs, the worse the evaluation of the aggregate. The larger the number of plus signs, the better the evaluation of the aggregate.
if "-----" then it means it just an overhead. Aggregate can potentially be deleted and "+++++" means Aggregate is potentially very useful.
Refer.
http://help.sap.com/saphelp_nw70/helpdata/en/b8/23813b310c4a0ee10000000a114084/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/60/f0fb411e255f24e10000000a1550b0/frameset.htm
4. Run your query in RSRT and run the query in the debug mode. Select "Display Aggregates Found" and "Do not use cache" in the debug mode. This will tell you if it hit any aggregates while running. If it does not show any aggregates, you might want to redesign your aggregates for the query.
Also your query performance can depend upon criteria and since you have given selection only on one infoprovider...just check if you are selecting huge amount of data in the report
Check for the query read mode in RSRT.(whether its A,X or H)..advisable read mode is X.
5. In BI 7 statistics need to be activated for ST03 and BI admin cockpit to work.
By implementing BW Statistics Business Content - you need to install, feed data and through ready made reports which for analysis.
http://help.sap.com/saphelp_nw70/helpdata/en/26/4bc0417951d117e10000000a155106/frameset.htm
/people/vikash.agrawal/blog/2006/04/17/query-performance-150-is-aggregates-the-way-out-for-me
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1955ba90-0201-0010-d3aa-8b2a4ef6bbb2
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ce7fb368-0601-0010-64ba-fadc985a1f94
http://help.sap.com/saphelp_nw04/helpdata/en/c1/0dbf65e04311d286d6006008b32e84/frameset.htm
You can go to T-Code DB20 which gives you all the performance related information like
Partitions
Databases
Schemas
Buffer Pools
Tablespaces etc
use tool RSDDK_CHECK_AGGREGATE in se38 to check for the corrupt aggregates
If aggregates contain incorrect data, you must regenerate them.
Note 646402 - Programs for checking aggregates (as of BW 3.0B SP15)
Thanks,
JituK

Steps for performance Tuning....!!!!

Hi all,
I need your help in Performance tuning.
While we do tuning in Oracle, apart from Indexes, where clause and order by clause, what are the other points we need to check. I mean explain plan etc...
I am working as Informatica Developer, but i need to make an documents which points out what are the step we can check while doing performance tuning on SQL queries.
Thanks in advance for your help.

Hi,
have a look into these link.it may helpful to you.
When your query takes too long .
When your query takes too long ...
* HOW TO Post a SQL statement tuning request template posting *
HOW TO: Post a SQL statement tuning request - template posting
Edited by: Ravi291283 on Jul 28, 2009 4:00 AM
Edited by: Ravi291283 on Jul 28, 2009 4:01 AM
Edited by: Ravi291283 on Jul 28, 2009 4:02 AM

Performance tuning for new OFMW environment

Hello
We have just set up a new UAT environment entirely on all Oracle FMW latest products which includes:
1) OS -RHEL V5
2) WebCenter
3) SOA Suite
4) Database
5) IDM
6) HTTP Server
7) WebLogic Server
As as post infrastructure setup plan we need to to performance tuning as well. Shall we do only WLS performance tuning or we need to tune each and every product in order to get optimum results.
Any guide? resource to help?
Pls advice
Regards
Dev

When you install the product soa-suite (and probably webcenter too) a prerequisite check is performed
that gives information about packages and parameters that need to be adjusted on your operating system.
For products that run on WebLogic Server you probably have to tune the JVM, examples can be found here:
- http://middlewaremagic.com/weblogic/?p=6930 (discusses JRockit)
- http://middlewaremagic.com/weblogic/?p=7083 (focuses on Coherence, but the considerations can be applied to other environments as well)
Examples that set-up the SOA-Suite can be found here:
- http://middlewaremagic.com/weblogic/?p=6040 (discusses considerations when installing the SOA suite)
- http://middlewaremagic.com/weblogic/?p=6872 (discusses considerations when adding the web-tier to the SOA suite)
The enterprise deployment guides can help too:
- SOA Suite: http://download.oracle.com/docs/cd/E21764_01/core.1111/e12036/toc.htm
- WebCenter: http://download.oracle.com/docs/cd/E21764_01/core.1111/e12037/toc.htm
These also contain sections on integration with Oracle Identity Management and the Oracle HTTP Server

Performance Tuning Tips

Dear All,
In our project we are facing lot of problems with the Performance, users are compaining about the poor performance of the few reports and all, we are in the process of fine tuning the reports by following the all methods/suggestions provided by SAP ( like removing the select queries from Loops, For all entries , Binary serach etc )
But still I want to know from you people what can we check from BASIS percpective ( all the settings ) and also ABAP percpective to improve the performance.
And also I have one more query that what is " Table Statistics " , what is the use of this ...
Please give ur valueble suggestions to us in improving the performance .
Thanks in Advance !

Hi
Ways of Performance Tuning
1. Selection Criteria
2. Select Statements
 Select Queries
 SQL Interface
 Aggregate Functions
 For all Entries
Select Over more than one Internal table
Selection Criteria
1. Restrict the data to the selection criteria itself, rather than filtering it out using the ABAP code using CHECK statement.
2. Select with selection list.
Points # 1/2
SELECT * FROM SBOOK INTO SBOOK_WA.
CHECK: SBOOK_WA-CARRID = 'LH' AND
 SBOOK_WA-CONNID = '0400'.
ENDSELECT.
The above code can be much more optimized by the code written below which avoids CHECK, selects with selection list
SELECT CARRID CONNID FLDATE BOOKID FROM SBOOK INTO TABLE T_SBOOK
WHERE SBOOK_WA-CARRID = 'LH' AND
 SBOOK_WA-CONNID = '0400'.
Select Statements Select Queries
1. Avoid nested selects
2. Select all the records in a single shot using into table clause of select statement rather than to use Append statements.
3. When a base table has multiple indices, the where clause should be in the order of the index, either a primary or a secondary index.
4. For testing existence , use Select.. Up to 1 rows statement instead of a Select-Endselect-loop with an Exit.
5. Use Select Single if all primary key fields are supplied in the Where condition .
Point # 1
SELECT * FROM EKKO INTO EKKO_WA.
SELECT * FROM EKAN INTO EKAN_WA
 WHERE EBELN = EKKO_WA-EBELN.
ENDSELECT.
ENDSELECT.
The above code can be much more optimized by the code written below.
SELECT PF1 PF2 FF3 FF4 INTO TABLE ITAB
 FROM EKKO AS P INNER JOIN EKAN AS F
 ON PEBELN = FEBELN.
Note: A simple SELECT loop is a single database access whose result is passed to the ABAP program line by line. Nested SELECT loops mean that the number of accesses in the inner loop is multiplied by the number of accesses in the outer loop. One should therefore use nested SELECT loops only if the selection in the outer loop contains very few lines or the outer loop is a SELECT SINGLE statement.
Point # 2
SELECT * FROM SBOOK INTO SBOOK_WA.
CHECK: SBOOK_WA-CARRID = 'LH' AND
 SBOOK_WA-CONNID = '0400'.
ENDSELECT.
The above code can be much more optimized by the code written below which avoids CHECK, selects with selection list and puts the data in one shot using into table
SELECT CARRID CONNID FLDATE BOOKID FROM SBOOK INTO TABLE T_SBOOK
WHERE SBOOK_WA-CARRID = 'LH' AND
 SBOOK_WA-CONNID = '0400'.
Point # 3
To choose an index, the optimizer checks the field names specified in the where clause and then uses an index that has the same order of the fields . In certain scenarios, it is advisable to check whether a new index can speed up the performance of a program. This will come handy in programs that access data from the finance tables.
Point # 4
SELECT * FROM SBOOK INTO SBOOK_WA
UP TO 1 ROWS
WHERE CARRID = 'LH'.
ENDSELECT.
The above code is more optimized as compared to the code mentioned below for testing existence of a record.
SELECT * FROM SBOOK INTO SBOOK_WA
 WHERE CARRID = 'LH'.
EXIT.
ENDSELECT.
Point # 5
If all primary key fields are supplied in the Where condition you can even use Select Single.
Select Single requires one communication with the database system, whereas Select-Endselect needs two.
Select Statements contd.. SQL Interface
1. Use column updates instead of single-row updates
to update your database tables.
2. For all frequently used Select statements, try to use an index.
3. Using buffered tables improves the performance considerably.
Point # 1
SELECT * FROM SFLIGHT INTO SFLIGHT_WA.
SFLIGHT_WA-SEATSOCC =
 SFLIGHT_WA-SEATSOCC - 1.
UPDATE SFLIGHT FROM SFLIGHT_WA.
ENDSELECT.
The above mentioned code can be more optimized by using the following code
UPDATE SFLIGHT
 SET SEATSOCC = SEATSOCC - 1.
Point # 2
SELECT * FROM SBOOK CLIENT SPECIFIED INTO SBOOK_WA
WHERE CARRID = 'LH'
 AND CONNID = '0400'.
ENDSELECT.
The above mentioned code can be more optimized by using the following code
SELECT * FROM SBOOK CLIENT SPECIFIED INTO SBOOK_WA
WHERE MANDT IN ( SELECT MANDT FROM T000 )
 AND CARRID = 'LH'
 AND CONNID = '0400'.
ENDSELECT.
Point # 3
Bypassing the buffer increases the network considerably
SELECT SINGLE * FROM T100 INTO T100_WA
BYPASSING BUFFER
WHERE SPRSL = 'D'
 AND ARBGB = '00'
 AND MSGNR = '999'.
The above mentioned code can be more optimized by using the following code
SELECT SINGLE * FROM T100 INTO T100_WA
WHERE SPRSL = 'D'
 AND ARBGB = '00'
 AND MSGNR = '999'.
Select Statements contd Aggregate Functions
 If you want to find the maximum, minimum, sum and average value or the count of a database column, use a select list with aggregate functions instead of computing the aggregates yourself.
Some of the Aggregate functions allowed in SAP are MAX, MIN, AVG, SUM, COUNT, COUNT( * )
Consider the following extract.
 Maxno = 0.
 Select * from zflight where airln = LF and cntry = IN.
 Check zflight-fligh > maxno.
 Maxno = zflight-fligh.
 Endselect.
The above mentioned code can be much more optimized by using the following code.
Select max( fligh ) from zflight into maxno where airln = LF and cntry = IN.
Select Statements contdFor All Entries
 The for all entries creates a where clause, where all the entries in the driver table are combined with OR. If the number of entries in the driver table is larger than rsdb/max_blocking_factor, several similar SQL statements are executed to limit the length of the WHERE clause.
 The plus
 Large amount of data
 Mixing processing and reading of data
 Fast internal reprocessing of data
 Fast
 The Minus
 Difficult to program/understand
 Memory could be critical (use FREE or PACKAGE size)
Points to be must considered FOR ALL ENTRIES Check that data is present in the driver table
 Sorting the driver table
 Removing duplicates from the driver table
Consider the following piece of extract
Loop at int_cntry.
 Select single * from zfligh into int_fligh
where cntry = int_cntry-cntry.
Append int_fligh.
Endloop.
The above mentioned can be more optimized by using the following code.
Sort int_cntry by cntry.
Delete adjacent duplicates from int_cntry.
If NOT int_cntry[] is INITIAL.
 Select * from zfligh appending table int_fligh
 For all entries in int_cntry
 Where cntry = int_cntry-cntry.
Endif.
Select Statements contd Select Over more than one Internal table
1. Its better to use a views instead of nested Select statements.
2. To read data from several logically connected tables use a join instead of nested Select statements. Joins are preferred only if all the primary key are available in WHERE clause for the tables that are joined. If the primary keys are not provided in join the Joining of tables itself takes time.
3. Instead of using nested Select loops it is often better to use subqueries.
Point # 1
SELECT * FROM DD01L INTO DD01L_WA
WHERE DOMNAME LIKE 'CHAR%'
 AND AS4LOCAL = 'A'.
SELECT SINGLE * FROM DD01T INTO DD01T_WA
 WHERE DOMNAME = DD01L_WA-DOMNAME
 AND AS4LOCAL = 'A'
 AND AS4VERS = DD01L_WA-AS4VERS
 AND DDLANGUAGE = SY-LANGU.
ENDSELECT.
The above code can be more optimized by extracting all the data from view DD01V_WA
SELECT * FROM DD01V INTO DD01V_WA
WHERE DOMNAME LIKE 'CHAR%'
 AND DDLANGUAGE = SY-LANGU.
ENDSELECT
Point # 2
SELECT * FROM EKKO INTO EKKO_WA.
SELECT * FROM EKAN INTO EKAN_WA
 WHERE EBELN = EKKO_WA-EBELN.
ENDSELECT.
ENDSELECT.
The above code can be much more optimized by the code written below.
SELECT PF1 PF2 FF3 FF4 INTO TABLE ITAB
 FROM EKKO AS P INNER JOIN EKAN AS F
 ON PEBELN = FEBELN.
Point # 3
SELECT * FROM SPFLI
INTO TABLE T_SPFLI
WHERE CITYFROM = 'FRANKFURT'
 AND CITYTO = 'NEW YORK'.
SELECT * FROM SFLIGHT AS F
 INTO SFLIGHT_WA
 FOR ALL ENTRIES IN T_SPFLI
 WHERE SEATSOCC < F~SEATSMAX
 AND CARRID = T_SPFLI-CARRID
 AND CONNID = T_SPFLI-CONNID
 AND FLDATE BETWEEN '19990101' AND '19990331'.
ENDSELECT.
The above mentioned code can be even more optimized by using subqueries instead of for all entries.
SELECT * FROM SFLIGHT AS F INTO SFLIGHT_WA
 WHERE SEATSOCC < F~SEATSMAX
 AND EXISTS ( SELECT * FROM SPFLI
 WHERE CARRID = F~CARRID
 AND CONNID = F~CONNID
 AND CITYFROM = 'FRANKFURT'
 AND CITYTO = 'NEW YORK' )
 AND FLDATE BETWEEN '19990101' AND '19990331'.
ENDSELECT.
Internal Tables
1. Table operations should be done using explicit work areas rather than via header lines.
2. Always try to use binary search instead of linear search. But dont forget to sort your internal table before that.
3. A dynamic key access is slower than a static one, since the key specification must be evaluated at runtime.
4. A binary search using secondary index takes considerably less time.
5. LOOP ... WHERE is faster than LOOP/CHECK because LOOP ... WHERE evaluates the specified condition internally.
6. Modifying selected components using MODIFY itab TRANSPORTING f1 f2.. accelerates the task of updating a line of an internal table.
Point # 2
READ TABLE ITAB INTO WA WITH KEY K = 'X BINARY SEARCH.
IS MUCH FASTER THAN USING
READ TABLE ITAB INTO WA WITH KEY K = 'X'.
If TAB has n entries, linear search runs in O( n ) time, whereas binary search takes only O( log2( n ) ).
Point # 3
READ TABLE ITAB INTO WA WITH KEY K = 'X'. IS FASTER THAN USING
READ TABLE ITAB INTO WA WITH KEY (NAME) = 'X'.
Point # 5
LOOP AT ITAB INTO WA WHERE K = 'X'.
ENDLOOP.
The above code is much faster than using
LOOP AT ITAB INTO WA.
CHECK WA-K = 'X'.
ENDLOOP.
Point # 6
WA-DATE = SY-DATUM.
MODIFY ITAB FROM WA INDEX 1 TRANSPORTING DATE.
The above code is more optimized as compared to
WA-DATE = SY-DATUM.
MODIFY ITAB FROM WA INDEX 1.
7. Accessing the table entries directly in a "LOOP ... ASSIGNING ..." accelerates the task of updating a set of lines of an internal table considerably
8. If collect semantics is required, it is always better to use to COLLECT rather than READ BINARY and then ADD.
9. "APPEND LINES OF itab1 TO itab2" accelerates the task of appending a table to another table considerably as compared to LOOP-APPEND-ENDLOOP.
10. DELETE ADJACENT DUPLICATES accelerates the task of deleting duplicate entries considerably as compared to READ-LOOP-DELETE-ENDLOOP.
11. "DELETE itab FROM ... TO ..." accelerates the task of deleting a sequence of lines considerably as compared to DO -DELETE-ENDDO.
Point # 7
Modifying selected components only makes the program faster as compared to Modifying all lines completely.
e.g,
LOOP AT ITAB ASSIGNING <WA>.
I = SY-TABIX MOD 2.
IF I = 0.
 <WA>-FLAG = 'X'.
ENDIF.
ENDLOOP.
The above code works faster as compared to
LOOP AT ITAB INTO WA.
I = SY-TABIX MOD 2.
IF I = 0.
 WA-FLAG = 'X'.
 MODIFY ITAB FROM WA.
ENDIF.
ENDLOOP.
Point # 8
LOOP AT ITAB1 INTO WA1.
READ TABLE ITAB2 INTO WA2 WITH KEY K = WA1-K BINARY SEARCH.
IF SY-SUBRC = 0.
 ADD: WA1-VAL1 TO WA2-VAL1,
 WA1-VAL2 TO WA2-VAL2.
 MODIFY ITAB2 FROM WA2 INDEX SY-TABIX TRANSPORTING VAL1 VAL2.
ELSE.
 INSERT WA1 INTO ITAB2 INDEX SY-TABIX.
ENDIF.
ENDLOOP.
The above code uses BINARY SEARCH for collect semantics. READ BINARY runs in O( log2(n) ) time. The above piece of code can be more optimized by
LOOP AT ITAB1 INTO WA.
COLLECT WA INTO ITAB2.
ENDLOOP.
SORT ITAB2 BY K.
COLLECT, however, uses a hash algorithm and is therefore independent
of the number of entries (i.e. O(1)) .
Point # 9
APPEND LINES OF ITAB1 TO ITAB2.
This is more optimized as compared to
LOOP AT ITAB1 INTO WA.
APPEND WA TO ITAB2.
ENDLOOP.
Point # 10
DELETE ADJACENT DUPLICATES FROM ITAB COMPARING K.
This is much more optimized as compared to
READ TABLE ITAB INDEX 1 INTO PREV_LINE.
LOOP AT ITAB FROM 2 INTO WA.
IF WA = PREV_LINE.
 DELETE ITAB.
ELSE.
 PREV_LINE = WA.
ENDIF.
ENDLOOP.
Point # 11
DELETE ITAB FROM 450 TO 550.
This is much more optimized as compared to
DO 101 TIMES.
DELETE ITAB INDEX 450.
ENDDO.
12. Copying internal tables by using ITAB2[ ] = ITAB1[ ] as compared to LOOP-APPEND-ENDLOOP.
13. Specify the sort key as restrictively as possible to run the program faster.
Point # 12
ITAB2[] = ITAB1[].
This is much more optimized as compared to
REFRESH ITAB2.
LOOP AT ITAB1 INTO WA.
APPEND WA TO ITAB2.
ENDLOOP.
Point # 13SORT ITAB BY K. makes the program runs faster as compared to SORT ITAB.
Internal Tables contd
Hashed and Sorted tables
1. For single read access hashed tables are more optimized as compared to sorted tables.
2. For partial sequential access sorted tables are more optimized as compared to hashed tables
Hashed And Sorted Tables
Point # 1
Consider the following example where HTAB is a hashed table and STAB is a sorted table
DO 250 TIMES.
N = 4 * SY-INDEX.
READ TABLE HTAB INTO WA WITH TABLE KEY K = N.
IF SY-SUBRC = 0.
ENDIF.
ENDDO.
This runs faster for single read access as compared to the following same code for sorted table
DO 250 TIMES.
N = 4 * SY-INDEX.
READ TABLE STAB INTO WA WITH TABLE KEY K = N.
IF SY-SUBRC = 0.
ENDIF.
ENDDO.
Point # 2
Similarly for Partial Sequential access the STAB runs faster as compared to HTAB
LOOP AT STAB INTO WA WHERE K = SUBKEY.
ENDLOOP.
This runs faster as compared to
LOOP AT HTAB INTO WA WHERE K = SUBKEY.
ENDLOOP.
Reward if usefull

Performance Tuning for BAM 11G

Hi All
Can anyone guide me for any documents or any tips realted to performance tuning for BAM 11G on on Linux

It would help to know if you have any specific issue. There are number of tweaks all they way from DB to Browser.
Few key things to follow:
1. Make sure you create index on DO. If there are too much old data in the DO and not useful then periodically delete it. Similar to relational database indexes, defining indexes in Oracle BAM creates and maintains an ordered list of data object elements for fast retrieval.
2. Ensure that IE setup to do automatic caching. This will help with reducing server round trips.
3. Tune DB performance. This would typically require DBA. Identify the SQL statements most likely to be causing the waits by looking at
the drilldown Top SQL Statements Ordered by Wait Time. Use SQL Analyze, EXPLAIN PLAN, or the tkprof utility to tune the queries that were identified.
Check the Dataobject tables involved in the query for missing indexes.
4. Use batching (this is on by default for most cases)
5. Fast network
6. Use profilers to look at machine load/cpu usage and distribute components on different boxes if needed.
7. Use better server AND client hardware. BAM dashboard are heavy users of ajax/javascript logic on the client

New Book on SAP BW Performance Tuning

Hi All,
Just thought of sharing this info on SDN...
A new book on SAP BW Performance Tuning is available...
http://www.erpguides.com/books/bwperformance.htm
Shreekant W Shiralkar & Bharat Patel have authored a book on SAP BW Performance Tuning. The book is based on their real life experiences on improving the system performance using various features/techniques/ideas.
I am aware that the The book covers many how-to procedures with screen shots for helping the reader to implement the performance improvement and benefit immediately. It would be interesting to read this book as a compilation of practical experiences on performance tuning .
Cheers,
Amol

Hi,
Read Data warehousing books written by Ralph Kimball or Bill Inmon in order to familiarize yourself with the basic concepts of data warehousing. This is the foundation of the entire thing.
Follow the SAP training materials on BW Data Warehousing, BW Reporting and BW Modeling. There are several books that can help you a lot when getting started. check this link
[http://www.amazon.com/SAP-BW-Book-List/lm/RRWM7R55RBEXQ/ref=cm_lmt_srch_f_2_rsrsrs2/103-7157721-8001426]
After you have a solid BW knowledge, start to review the help.sap.com site.
Hope this helps,
Regards,
Haritha.

Performance tuning techniques

I am looking to compile a list of the major performance tuning techniques that can be implemented in an ABAP program.
Appreciate any feedback
J

HI,
chk this.
http://www.erpgenie.com/abap/performance.htm
http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
http://www.sap-img.com/abap/performance-tuning-for-data-selection-statement.htm
Performance tuning for Data Selection Statement
For all entries
The for all entries creates a where clause, where all the entries in the driver table are combined with OR. If the number of
entries in the driver table is larger than rsdb/max_blocking_factor, several similar SQL statements are executed to limit the
length of the WHERE clause.
The plus
Large amount of data
Mixing processing and reading of data
Fast internal reprocessing of data
Fast
The Minus
Difficult to program/understand
Memory could be critical (use FREE or PACKAGE size)
Some steps that might make FOR ALL ENTRIES more efficient:
Removing duplicates from the the driver table
Sorting the driver table
If possible, convert the data in the driver table to ranges so a BETWEEN statement is used instead of and OR statement:
FOR ALL ENTRIES IN i_tab
WHERE mykey >= i_tab-low and
 mykey <= i_tab-high.
Nested selects
The plus:
Small amount of data
Mixing processing and reading of data
Easy to code - and understand
The minus:
Large amount of data
when mixed processing isnt needed
Performance killer no. 1
Select using JOINS
The plus
Very large amount of data
Similar to Nested selects - when the accesses are planned by the programmer
In some cases the fastest
Not so memory critical
The minus
Very difficult to program/understand
Mixing processing and reading of data not possible
Use the selection criteria
SELECT * FROM SBOOK.
CHECK: SBOOK-CARRID = 'LH' AND
 SBOOK-CONNID = '0400'.
ENDSELECT.
SELECT * FROM SBOOK
WHERE CARRID = 'LH' AND
 CONNID = '0400'.
ENDSELECT.
Use the aggregated functions
C4A = '000'.
SELECT * FROM T100
WHERE SPRSL = 'D' AND
 ARBGB = '00'.
CHECK: T100-MSGNR > C4A.
C4A = T100-MSGNR.
ENDSELECT.
SELECT MAX( MSGNR ) FROM T100 INTO C4A
WHERE SPRSL = 'D' AND
 ARBGB = '00'.
Select with view
SELECT * FROM DD01L
WHERE DOMNAME LIKE 'CHAR%'
 AND AS4LOCAL = 'A'.
SELECT SINGLE * FROM DD01T
 WHERE DOMNAME = DD01L-DOMNAME
 AND AS4LOCAL = 'A'
 AND AS4VERS = DD01L-AS4VERS
 AND DDLANGUAGE = SY-LANGU.
ENDSELECT.
SELECT * FROM DD01V
WHERE DOMNAME LIKE 'CHAR%'
 AND DDLANGUAGE = SY-LANGU.
ENDSELECT.
Select with index support
SELECT * FROM T100
WHERE ARBGB = '00'
 AND MSGNR = '999'.
ENDSELECT.
SELECT * FROM T002.
SELECT * FROM T100
 WHERE SPRSL = T002-SPRAS
 AND ARBGB = '00'
 AND MSGNR = '999'.
ENDSELECT.
ENDSELECT.
Select Into table
REFRESH X006.
SELECT * FROM T006 INTO X006.
APPEND X006.
ENDSELECT
SELECT * FROM T006 INTO TABLE X006.
Select with selection list
SELECT * FROM DD01L
WHERE DOMNAME LIKE 'CHAR%'
 AND AS4LOCAL = 'A'.
ENDSELECT
SELECT DOMNAME FROM DD01L
INTO DD01L-DOMNAME
WHERE DOMNAME LIKE 'CHAR%'
 AND AS4LOCAL = 'A'.
ENDSELECT
Key access to multiple lines
LOOP AT TAB.
CHECK TAB-K = KVAL.
ENDLOOP.
LOOP AT TAB WHERE K = KVAL.
ENDLOOP.
Copying internal tables
REFRESH TAB_DEST.
LOOP AT TAB_SRC INTO TAB_DEST.
APPEND TAB_DEST.
ENDLOOP.
TAB_DEST[] = TAB_SRC[].
Modifying a set of lines
LOOP AT TAB.
IF TAB-FLAG IS INITIAL.
 TAB-FLAG = 'X'.
ENDIF.
MODIFY TAB.
ENDLOOP.
TAB-FLAG = 'X'.
MODIFY TAB TRANSPORTING FLAG
 WHERE FLAG IS INITIAL.
Deleting a sequence of lines
DO 101 TIMES.
DELETE TAB_DEST INDEX 450.
ENDDO.
DELETE TAB_DEST FROM 450 TO 550.
Linear search vs. binary
READ TABLE TAB WITH KEY K = 'X'.
READ TABLE TAB WITH KEY K = 'X' BINARY SEARCH.
Comparison of internal tables
DESCRIBE TABLE: TAB1 LINES L1,
 TAB2 LINES L2.
IF L1 <> L2.
TAB_DIFFERENT = 'X'.
ELSE.
TAB_DIFFERENT = SPACE.
LOOP AT TAB1.
 READ TABLE TAB2 INDEX SY-TABIX.
 IF TAB1 <> TAB2.
 TAB_DIFFERENT = 'X'. EXIT.
 ENDIF.
ENDLOOP.
ENDIF.
IF TAB_DIFFERENT = SPACE.
ENDIF.
IF TAB1[] = TAB2[].
ENDIF.
Modify selected components
LOOP AT TAB.
TAB-DATE = SY-DATUM.
MODIFY TAB.
ENDLOOP.
WA-DATE = SY-DATUM.
LOOP AT TAB.
MODIFY TAB FROM WA TRANSPORTING DATE.
ENDLOOP.
Appending two internal tables
LOOP AT TAB_SRC.
APPEND TAB_SRC TO TAB_DEST.
ENDLOOP
APPEND LINES OF TAB_SRC TO TAB_DEST.
Deleting a set of lines
LOOP AT TAB_DEST WHERE K = KVAL.
DELETE TAB_DEST.
ENDLOOP
DELETE TAB_DEST WHERE K = KVAL.
Tools available in SAP to pin-point a performance problem
The runtime analysis (SE30)
SQL Trace (ST05)
Tips and Tricks tool
The performance database
Optimizing the load of the database
Using table buffering
Using buffered tables improves the performance considerably. Note that in some cases a stament can not be used with a buffered table, so when using these staments the buffer will be bypassed. These staments are:
Select DISTINCT
ORDER BY / GROUP BY / HAVING clause
Any WHERE clasuse that contains a subquery or IS NULL expression
JOIN s
A SELECT... FOR UPDATE
If you wnat to explicitly bypass the bufer, use the BYPASS BUFFER addition to the SELECT clause.
Use the ABAP SORT Clause Instead of ORDER BY
The ORDER BY clause is executed on the database server while the ABAP SORT statement is executed on the application server. The datbase server will usually be the bottleneck, so sometimes it is better to move thje sort from the datsbase server to the application server.
If you are not sorting by the primary key ( E.g. using the ORDER BY PRIMARY key statement) but are sorting by another key, it could be better to use the ABAP SORT stament to sort the data in an internal table. Note however that for very large result sets it might not be a feasible solution and you would want to let the datbase server sort it.
Avoid ther SELECT DISTINCT Statement
As with the ORDER BY clause it could be better to avoid using SELECT DISTINCT, if some of the fields are not part of an index. Instead use ABAP SORT + DELETE ADJACENT DUPLICATES on an internal table, to delete duplciate rows.
Regds
Anver
if hlped pls mark points

Planning to start the performance tuning but....

Friends,
Database OS: RHEL AS 3.0
Database: Oracle Release 9.2.0.4.0
Number of Tables: 503
TableSpace size - 1.8GB out of 3GB
Max.Records in a Table - 1 Million and its increasing..
Our DB Optimizer mode is - CHOOSE (is it RBO?)
We are not using enterprise manager and not installed any tuning scripts like statspack etc....
Currently we are taking user managed backup without any problem so we are continuing the same from 2004 onwards.
Now we want want to tune our database.(We have never tuned our database)
We would like to change our optimizer from RBO to CBO.
Can anybody tell me the first step for the performance tuning?
Please dont suggest me oracle doc im already studying.....its taking time....
In the mean time......
Step 1: Can i Analyze the table or dbms_stat package?
We have not at all used the analyze or dbms_stat. So can i start with any of the above or do u have any other suggestions for the 1st step?
Thanks

our manager feels that if we tune our db the performance will be more than compared to the current one.you have a mystique manager then, ask him what kind of "feelings" does he have about my database ;) there is no place for feelings in this game, this is life cycle to be successful ; testing->reporting->analyzing->take nedded actions->re-testing->reporting->analyzing..
so while you are surely reading the documentation;
Oracle9i Database Performance Planning Release 2 (9.2)
http://download.oracle.com/docs/cd/B10501_01/server.920/a96532/toc.htm
Oracle9i Database Performance Tuning Guide and Reference Release 2 (9.2)
http://download.oracle.com/docs/cd/B10501_01/server.920/a96533/toc.htm
first thing you have to do is to setup an appropriate test environment with same os-oracle releases, parameters;
-- some of them to check
SELECT NAME, VALUE
FROM v$system_parameter a
WHERE a.NAME IN
       ('compatible', 'optimizer_features_enable',
        'optimizer_mode', 'pga_aggregate_target', 'workarea_size_policy',
        'db_file_multiblock_read_count', .. )and of course schema set and data amount. Then you run your application on load and take statspack snapshots and do the same after collecting statistics;
-- customize for your configuration, schema level object statistics
exec dbms_stats.gather_schema_stats( ownname =>'YOUR_SCHEMA', degree=>16, options=>'GATHER AUTO', estimate_percent=>dbms_stats.auto_sample_size, cascade=>TRUE, method_opt=>'FOR ALL COLUMNS SIZE AUTO', granularity=>'ALL');
-- check your system stats, with sys account
SELECT pname, pval1 FROM sys.aux_stats$ WHERE sname = 'SYSSTATS_MAIN';after you have the base report and the report after change compare the top 5 waits, the top queries which have dramatic logical I/O changes etc. At this point you go into session based tuning in order to understand why a specific query performs worser with CBO compared to RBO. You need to be able to create and read execution plans and i/o statistics at least. Here are some quick introductions;
http://www.bhatipoglu.com/entry/17/oracle-performance-analysis-tracing-and-performance-evaluation
http://psoug.org/reference/explain_plan.html
http://coskan.wordpress.com/2007/03/04/viewing-explain-plan/
and last words again goes to your manager; how does he "feel" about a 10gR2 migration? With Grid Control, AWR, ADDM and ASH performance tuning evolved a lot. Important note here, after 10g RBO is dead(unsupported).
Best Regards,
H.Tonguç YILMAZ
http://tonguc.yilmaz.googlepages.com/
Message was edited by:
TongucY

Performance Tuning - Suggestions

Hi,
I have an ABAP (Interactive List) Program times out in PRD very often. The ABAP run time is about 99%. The DB time is less than 1%. All the select statements has the table index in place. Actually it isprocessing all the Production Orders (Released but not Confirmed/Closed). Please let me know if you have any suggestion.
Appreciate Your Help.
Thanks,
Kannan.

Hi
1) Dont use nested select statements
2) If possible use for all entries in addition
3) In the where addition make sure you give all the primary key
4) Use Index for the selection criteria.
5) You can also use inner joins
6) You can try to put the data from the first select statement into an Itab and then in order to select the data from the second table use for all entries in.
7) Use the runtime analysis SE30 and SQL Trace (ST05) to identify the performance and also to identify where the load is heavy, so that you can change the code accordingly
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5d0db4c9-0e01-0010-b68f-9b1408d5f234
ABAP performance depends upon various factors and in devicded in three parts:
1. Database
2. ABAP
3. System
Run Any program using SE30 (performance analys) to improve performance refer to tips and trics section of SE30, Always remember that ABAP perfirmance is improved when there is least load on Database.
u can get an interactive grap in SE30 regarding this with a file.
also if u find runtime of parts of codes then use :
Switch on RTA Dynamically within ABAP Code
*To turn runtim analysis on within ABAP code insert the following code
SET RUN TIME ANALYZER ON.
*To turn runtim analysis off within ABAP code insert the following code
SET RUN TIME ANALYZER OFF.
Always check the driver internal tables is not empty, while using FOR ALL ENTRIES
Avoid for all entries in JOINS
Try to avoid joins and use FOR ALL ENTRIES.
Try to restrict the joins to 1 level only ie only for tables
Avoid using Select *.
Avoid having multiple Selects from the same table in the same object.
Try to minimize the number of variables to save memory.
The sequence of fields in 'where clause' must be as per primary/secondary index ( if any)
Avoid creation of index as far as possible
Avoid operators like <>, > , < & like % in where clause conditions
Avoid select/select single statements in loops.
Try to use 'binary search' in READ internal table. Ensure table is sorted before using BINARY SEARCH.
Avoid using aggregate functions (SUM, MAX etc) in selects ( GROUP BY , HAVING,)
Avoid using ORDER BY in selects
Avoid Nested Selects
Avoid Nested Loops of Internal Tables
Try to use FIELD SYMBOLS.
Try to avoid into Corresponding Fields of
Avoid using Select Distinct, Use DELETE ADJACENT
Check the following Links
Re: performance tuning
Re: Performance tuning of program
http://www.sapgenie.com/abap/performance.htm
http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
check the below link
http://www.sap-img.com/abap/performance-tuning-for-data-selection-statement.htm
See the following link if it's any help:
http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
Check also http://service.sap.com/performance
and
books like
http://www.sap-press.com/product.cfm?account=&product=H951
http://www.sap-press.com/product.cfm?account=&product=H973
http://www.sap-img.com/abap/more-than-100-abap-interview-faqs.htm
http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
Performance tuning for Data Selection Statement
http://www.sap-img.com/abap/performance-tuning-for-data-selection-statement.htm
Debugger
http://help.sap.com/saphelp_47x200/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
http://www.cba.nau.edu/haney-j/CIS497/Assignments/Debugging.doc
http://help.sap.com/saphelp_erp2005/helpdata/en/b3/d322540c3beb4ba53795784eebb680/frameset.htm
Run Time Analyser
http://help.sap.com/saphelp_47x200/helpdata/en/c6/617cafe68c11d2b2ab080009b43351/content.htm
SQL trace
http://help.sap.com/saphelp_47x200/helpdata/en/d1/801f7c454211d189710000e8322d00/content.htm
CATT - Computer Aided Testing Too
http://help.sap.com/saphelp_47x200/helpdata/en/b3/410b37233f7c6fe10000009b38f936/frameset.htm
Test Workbench
http://help.sap.com/saphelp_47x200/helpdata/en/a8/157235d0fa8742e10000009b38f889/frameset.htm
Coverage Analyser
http://help.sap.com/saphelp_47x200/helpdata/en/c7/af9a79061a11d4b3d4080009b43351/content.htm
Runtime Monitor
http://help.sap.com/saphelp_47x200/helpdata/en/b5/fa121cc15911d5993d00508b6b8b11/content.htm
Memory Inspector
http://help.sap.com/saphelp_47x200/helpdata/en/a2/e5fc84cc87964cb2c29f584152d74e/content.htm
ECATT - Extended Computer Aided testing tool.
http://help.sap.com/saphelp_47x200/helpdata/en/20/e81c3b84e65e7be10000000a11402f/frameset.htm
Just refer to these links...
performance
Performance
Performance Guide
performance issues...
Performance Tuning
Performance issues
performance tuning
performance tuning
You can go to the transaction SE30 to have the runtime analysis of your program.Also try the transaction SCI , which is SAP Code Inspector.
1 Always check the driver internal tables is not empty, while using FOR ALL ENTRIES
2 Avoid for all entries in JOINS
3 Try to avoid joins and use FOR ALL ENTRIES.
4 Try to restrict the joins to 1 level only ie only for 2 tables
5 Avoid using Select *.
6 Avoid having multiple Selects from the same table in the same object.
7 Try to minimize the number of variables to save memory.
8 The sequence of fields in 'where clause' must be as per primary/secondary index ( if any)
9 Avoid creation of index as far as possible
10 Avoid operators like <>, > , < & like % in where clause conditions
11 Avoid select/select single statements in loops.
12 Try to use 'binary search' in READ internal table. Ensure table is sorted before using BINARY SEARCH.
13 Avoid using aggregate functions (SUM, MAX etc) in selects ( GROUP BY , HAVING,)
14 Avoid using ORDER BY in selects
15 Avoid Nested Selects
16 Avoid Nested Loops of Internal Tables
17 Try to use FIELD SYMBOLS.
18 Try to avoid into Corresponding Fields of
19 Avoid using Select Distinct, Use DELETE ADJACENT.
Regards
Anji

Performance Tuning Of VA01

Hi,
Please can anybody help me in the performance tuning of the VA01 transaction since its consuming a lot of time in production.
This issue is very urgent.
Pls help.

Always check the driver internal tables is not empty, while using FOR ALL ENTRIES
Avoid for all entries in JOINS
Try to avoid joins and use FOR ALL ENTRIES.
Try to restrict the joins to 1 level only ie only for tables
Avoid using Select *.
Avoid having multiple Selects from the same table in the same object.
Try to minimize the number of variables to save memory.
The sequence of fields in 'where clause' must be as per primary/secondary index ( if any)
Avoid creation of index as far as possible
Avoid operators like <>, > , < & like % in where clause conditions
Avoid select/select single statements in loops.
Try to use 'binary search' in READ internal table. Ensure table is sorted before using BINARY SEARCH.
Avoid using aggregate functions (SUM, MAX etc) in selects ( GROUP BY , HAVING,)
Avoid using ORDER BY in selects
Avoid Nested Selects
Avoid Nested Loops of Internal Tables
Try to use FIELD SYMBOLS.
Try to avoid into Corresponding Fields of
Avoid using Select Distinct, Use DELETE ADJACENT
you can refer these links :
http://www.sapgenie.com/abap/performance.htm
chk this
How to increase the performance of a program
Check the following Links
Re: performance tuning
Re: Performance tuning of program
http://www.sapgenie.com/abap/performance.htm
http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
check the below link
http://www.sap-img.com/abap/performance-tuning-for-data-selection-statement.htm
See the following link if it's any help:
http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
Check also http://service.sap.com/performance
and
books like
http://www.sap-press.com/product.cfm?account=&product=H951
http://www.sap-press.com/product.cfm?account=&product=H973
http://www.sap-img.com/abap/more-than-100-abap-interview-faqs.htm
cheers!
sri

Performance Tuning in MD4C--Multilevel order

Similar Messages

Maybe you are looking for