Permission problem while creating cache group

Hi,
I am trying to create cache groups on SQL developer in TimesTen Cache DB. I have connected to the CacheDB using schema owner/password (say HR/HR). While creating a cache group, I am required to set cache administrator, which in turn requires this user (that is the schema user) to have the CACHE_MANAGER permission.
Is it necessary for the schema user to also be the cache_manager to be able to create a cache group?
As per the documentation, no such requirement has been mentioned, which means I am probably missing a step in between.
Also, if I connect to the DB via Cache Manager user (cacheuser/timesten with oracle as ORA pwd), I don't see the HR schema tables while creating a cache group.
Could someone clarify this?
Thanks in advance!
Regards,
Silky
Applications Engineer
Oracle India Pvt. Ltd.

A cache admin user require CACHE_MANAGER privilege to do all cache operation. It has been documented here
http://docs.oracle.com/cd/E21901_01/doc/timesten.1122/e21634/prereqs.htm#CHDJBIAE
Please go through the section "Configuring a TimesTen database to cache Oracle data " for setting up cache in Timesten side.
"As the instance administrator, use the ttIsql utility to grant the cache manager user cacheuser the required privileges:
Command> GRANT CREATE SESSION, CACHE_MANAGER, CREATE ANY TABLE TO cacheuser;
Command> exit "
Hope you have run required script in Oracle side also. Section : Configuring the Oracle database to cache data in TimesTen
Regards
Rajesh

Similar Messages

Release Procudure - Problem while creating Release Group:Reg-

in release procedure char. were created and class also created and the char. were assigned to the class too.
But when i am creating release group the below error was coming..
Please check release classes (see long text)
and if i am see long text the below is the error
Please check release classes (see long text)
Message no. ME492
Diagnosis
Here you can assign release groups to release classes. Only one release class should be used within the release groups for overall release and the release groups without overall release in each case. However, in this instance several release classes have been used.
Procedure
Assign the release groups that were created for overall release to one release class only. Assign the release groups that were not created for overall release to a different release class.
Example:
Rel. group Rel. obj. Overall rel.    Class       Description
01 1 _   FRG_EBAN      Group 01
02 1 _   FRG_EBAN      Group 02
S1 1 X   FRG_GF_EBAN Group S1
S2 1 X   FRG_GF_EBAN Group S2
please see what can i do to solve the issue.
Thanks and Regards,
Rajesh.

HI,
It is not possible to have more than one class define in the release
strategy but it is possible to define difference characterics within
the same class.
Please verify the following:
1) As the long text of the message says, first check that one release
class only is used within the release groups for overall release and
   the release groups without overall release in each case. However, in
   this instance several release classes have been used.
   This means you have to have one release class only for all the
   release groups for overall release.
   Assign the release groups that were not created for overall release
   to a different release class.
Example:
Rel. group,   Rel. obj.,   Overall rel., Class ,     Description
01,,1,,_,    FRG_EBAN,      Group 01
02,,1,,_,    FRG_EBAN,      Group 02
S1,,1,,X,    FRG_GF_EBAN,   Group S1
S2,,1,,X,    FRG_GF_EBAN,   Group S2
2) If you have followed all the indications of the long text of the
   message and the error is still displayed, please try to create the
   new release group via the 'New Entries' button.
3) If you tried to create the release group via this button and the
   error is still been displayed, please verify the implementation of
   note 125316 in you system.
Best Regards,
Arminda Jack

Problem while creating logon group in sapgui

Dear all,
   To create logon group in SAP GUi, I am trying with group options
When we hit the generate list with proper entries, in some machines
It is showing login groups. But in some machine it will show
sapmsPRD message not reachable or unknown.
            We try with service file (in local machine), we enter
The port sapmsPRD 3600 or sapmsPRD 3200
The above technique is success in some machine in some machine is not.
Regards,
satish

You need to enter in the services file
sapms<SID>      3600/tcp
If you use DNS in an active Directory domain you may need to
ipconfig /flushdns
to make the local system re-read its service file.
Markus

Problem creating cache group for a table with data type varchar2(1800 CHAR)

Hi,
I am using TimesTen 7.0 with Oracle 10.2.0.4 server. While creating Cache Group for one of my table I'm getting the following error.
5121: Non-standard type mapping for column TICKET.DESCRIPTION, cache operations are restricted
5168: Restricted cache groups are deprecated
5126: A system managed cache group cannot contain non-standard column type mapping
The command failed.
One of my filed type in oracle table is Varchar2(1800 CHAR). If I change the filed size to <=1000 it (E.g. Varchar2(1000 CHAR)) then the Create Cache command works fine.
MyDatabase Character Set is UTF8.
Is it possible to solve without changing the filed size in the Oracle Table?
Request your help on this.
Thanks,
Sunil

Hi Chris.
The TimesTen server and the Oracle Client is installed on a 32-bit system.
1. ttVersion
TimesTen Release 7.0.5.0.0 (32 bit Linux/x86) (timesten122:17000) 2008-04-04T00:09:04Z
Instance admin: root
Instance home directory: /appl/TimesTen/timesten122
Daemon home directory: /var/TimesTen/timesten122
Access control enabled.
2. Oracle DB details
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bi
PL/SQL Release 10.2.0.3.0 - Production
CORE 10.2.0.3.0 Production
TNS for Linux: Version 10.2.0.3.0 - Production
NLSRTL Version 10.2.0.3.0 - Production
Oracle Client - Oracle Client 10.2.0.4 running in a 32 bit Linux/x86
3. ODBC Details
Driver=/appl/TimesTen/timesten122/lib/libtten.so
DataStore=/var/TimesTen/data
PermSize=1700
TempSize=244
PassThrough=2
UID=testuser
OracleId=oraclenetservice
OraclePwd=testpwd
DatabaseCharacterSet=UTF8
Thanks,
Sunil

Error while creating product group

hi,
i am getting error while creating Product group.
Required parameters missing when calling up module
Message no. M3749
Please suggest me.. how to cop this
Regards,
amit

Dear Brahmankar,
I am using product groups in SOP as well as in the normal plannning scenario.In the normal planning scenario I am giving my PIR's in MD61 for the entire group.Then I am running MRP in MD02 for my product group.System is generating all the requirements normally for the entire group .
Please suggest me , this process is correct or it will create any problem in any module .
Thanks & Regards
Prabhakar

Error in creating Cache Group

Hi,
When i tried to create cache group i am getting below error
CREATE READONLY CACHE GROUP customer_orders
FROM myuser.customer
(cust_num NUMBER(6) NOT NULL,
region VARCHAR2(10),
name VARCHAR2(50),
address VARCHAR2(100),
PRIMARY KEY(cust_num)),
myuser.orders
(ord_num NUMBER(10) NOT NULL,
cust_num NUMBER(6) NOT NULL,
when_placed DATE NOT NULL,
when_shipped DATE NOT NULL,
PRIMARY KEY(ord_num),
FOREIGN KEY(cust_num) REFERENCES myuser.customer(cust_num)) ;
5220: Permanent Oracle connection failure error in OCIServerAttach(): ORA-12154: TNS:could not resolve the connect identifier specified rc = -1
5131: Cannot connect to backend database: OracleNetServiceName = "orcl_db", uid = "XXXXXXX", pwd is hidden, TNS_ADMIN = "C:\TimesTen11.2.2", ORACLE_HOME= ""
But my Oracle database Name is MYdatabase
Oracle LSNRCTL
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1522)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.2.0.2.0 - Production
Start Date 07-AUG-2012 10:31:38
Uptime 4 days 3 hr. 1 min. 55 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\TimesTen11.2.2\listener.ora
Listener Log File E:\app\XXXXXXX\diag\tnslsnr\localhost\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1522ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1522)))
Services Summary...
Service "MYdatabaseXDB" has 1 instance(s).
Instance "MYdatabase", status READY, has 1 handler(s) for this service...
Service "MYdatabase" has 1 instance(s).
Instance "MYdatabase", status READY, has 1 handler(s) for this service...
Service "orcl" has 1 instance(s).
Instance "orcl", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
how to change OracleNetServiceName = "orcl_db" to OracleNetServiceName = "MYdatabase"
Thanks!

You should create the cache groups by using cachadmin user, not use object owner user.
In Oracle DB:
SQL> @grantCacheAdminPrivileges "cacheadmin"
Please enter the administrator user id
The value chosen for administrator user id is cacheadmin
***************** Initialization for cache admin begins ******************
0. Granting the CREATE SESSION privilege to CACHEADMIN
1. Granting the TT_CACHE_ADMIN_ROLE to CACHEADMIN
2. Granting the DBMS_LOCK package privilege to CACHEADMIN
3. Granting the RESOURCE privilege to CACHEADMIN
4. Granting the CREATE PROCEDURE privilege to CACHEADMIN
5. Granting the CREATE ANY TRIGGER privilege to CACHEADMIN
6. Granting the DBMS_LOB package privilege to CACHEADMIN
7. Granting the SELECT on SYS.ALL_OBJECTS privilege to CACHEADMIN
8. Granting the SELECT on SYS.ALL_SYNONYMS privilege to CACHEADMIN
9. Checking if the cache administrator user has permissions on the default
tablespace
     Permission exists
11. Granting the CREATE ANY TYPE privilege to CACHEADMIN
********* Initialization for cache admin user done successfully *********
SQL>In TimesTen:
Command> CREATE USER cacheadmin IDENTIFIED BY oracle;
User created.
Command> GRANT CREATE SESSION, CACHE_MANAGER, CREATE ANY TABLE, DROP ANY TABLE TO cacheadmin;
Command>
Command> CREATE USER oratt IDENTIFIED BY oracle;
User created.
Command> grant create session to oratt;
Command>
[oracle@tt1 ~]$ ttIsql "DSN=db_cache;UID=cacheadmin;PWD=oracle;OraclePWD=oracle"
Copyright (c) 1996-2010, Oracle. All rights reserved.
Type ? or "help" for help, type "exit" to quit ttIsql.
connect "DSN=db_cache;UID=cacheadmin;PWD=oracle;OraclePWD=oracle";
Connection successful: DSN=db_cache;UID=cacheadmin;DataStore=/u01/app/oracle/datastore/db_cache;DatabaseCharacterSet=AL32UTF8;ConnectionCharacterSet=US7ASCII;DRIVER=/u01/app/oracle/product/11.2.1/TimesTen/tt1/lib/libtten.so;PermSize=100;TempSize=32;TypeMode=0;CacheGridEnable=0;OracleNetServiceName=ORCL;
(Default setting AutoCommit=1)
Command> call ttCacheUidPwdSet('cacheadmin','oracle');
Command>
Command> CREATE READONLY CACHE GROUP readcache
       >   AUTOREFRESH INTERVAL
       >   5 SECONDS
       > FROM oratt.readtab (
       >        a NUMBER NOT NULL PRIMARY KEY,
       >        b VARCHAR2(100) );
Command> Additionally dont forget to issue the grants for cacheadmin user in Oracle DB
SQL> GRANT SELECT ON readtab TO cacheadmin;
Grant succeeded.Regards,
Gennady

Problem while creating PO for Calibration order PR

Hi,
I am facing following problem while create PO for calibration order PR:
"Comparison of the field selection strings from the G/L account 8000010800 and the account assignment category F reveals that there is an incompatible combination of field selections for the field selection group 'Network'.
The G/L account field selection is stored in table T004F; that for the account assignment is stored in table T162K."
Can anybody help me urgently.
Regards,
Mew

Hi,
Check the field selection for account assignment category & Field status group of G/L 8000010800.
Compare both & set the field selection equally in both.
Regards,
Piyush

Problem while creating WBS elements using LSMW

Hello experts,
I am able to create Project Definitions using LSMW. (using recording)
But there is a problem while creating WBS elements.
Tcode CJ20 has table control and that will become problem for multiple rows (levels).
Can anyone suggest a solution to mass upload WBS elements?
Thanks for your valuable advice.

Hi,
Instead of using "BAPI_PROJECT_MAINTAIN", use following solution. We are using this solution and it is working pretty good.
If the WBS element is already created and you want to create one more with same data, first get the WBS related information using BAPI_PROJECT_GETINFO as you are doing currently.
I am using different sets of BAPIs to create project, create / change WBS element.
I use function module from Function group CJ2001 ( Project related BAPIs ), CJ2054 ( WBS related BAPIs ) and PS_BAPI ( pre/post processing BAPIs ). There are specific order in which you need to execute these BAPIs.
For example if you want to create / change the WBS element, the BAPIs sequence is:
<b>1. BAPI_PS_INITIALIZATION
2. BAPI_BUS2054_CREATE_MULTI ( to create WBS )
or
2. BAPI_BUS2054_CHANGE_MULTI ( to change WBS )
3. BAPI_PS_PRECOMMIT
4. BAPI_TRANSACTION_COMMIT</b>
Check the documentation of BAPI "BAPI_BUS2054_CREATE_MULTI " to see how these function modules work.
Let me know if you need further information.
Regards,
RS

Error while creating resource group using non-globalzones.

Dear all,
Hi techs please guide me how to create failover resource group in nongloablzones.
I'm getting error while creating resource group using non-globalzones.
My setup:
I have two node cluster running sun cluster 3.2 configured and running properly.
node1: sun5
nide2: sun8
I have create non-globalzone "zone1" in node:sun5
I have create non-globalzone "zone2" in node:sun8
node:sun5# clrg create -n sun5:zone1,sun8:zone2 zonerg
*(C160082) WARNING: one or more zones in the node list have never been fully booted in the cluster mode,verify that correct zone name was entered.*
kindly guide me how to create Apache resource group using non-glabalzones, i'm new to sun cluster 3.2. please guide me step by step information.
Thanks in advance,
veera
Edited by: veeraa on Dec 19, 2008 1:54 AM

Hi Veera,
Actually you are getting a warning message where one of two things could have happened. Either you specified an incorrect zone name or one of the zones has not been fully booted. It's likely that you haven't booted the zones, so please follow this:
zoneadm list -iv
If zone1 or zone2 are not running then boot and configure them
zoneadm -z <zone> boot
zlogin -C <zone>
After that you can continue to follow the step by step instructions at
http://docs.sun.com/app/docs/doc/819-2975/chddadaa?a=view
These may also help
http://blogs.sun.com/Jacky/entry/a_simple_expample_about_how
http://blogs.sun.com/SC/en_US/entry/sun_cluster_and_solaris_zones
Regards
Neil

Problem: While creating a project in iDVD, it plays perfectly on the computer, but after burning the sound is off. Video soundtrack is not in the right place. HELP!

Problem: While creating a project in iDVD, it plays perfectly on the computer, but after burning the sound is off. Video soundtrack is not in the right place. HELP!

Have you checked out the topics at the right in the More Like This section?
OT

Problem while Creating MVLOG with synonym in Oracle 9i:Is it an Oracle Bug?

Hi All,
I am facing a problem while Creating MVLOG with synonym in Oracle 9i but for 10G it is working fine. Is it an Oracle Bug? or i am missing something.
SQL> select * from v$version;
BANNER
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Product
PL/SQL Release 10.2.0.1.0 - Production
CORE    10.2.0.1.0      Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
SQL>
SQL> create table t ( name varchar2(20), id varchar2(1) primary key);
Table created.
SQL> create materialized view log on t;
Materialized view log created.
SQL> create public synonym syn_t for t;
Synonym created.
SQL> CREATE MATERIALIZED VIEW MV_t
2 REFRESH ON DEMAND
3 WITH PRIMARY KEY
4 AS
5 SELECT name,id
6 FROM syn_t;
Materialized view created.
SQL> CREATE MATERIALIZED VIEW LOG ON MV_t
2 WITH PRIMARY KEY
3   (name)
4    INCLUDING NEW VALUES;
Materialized view log created.
SQL> select * from v$version;
BANNER
Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
PL/SQL Release 9.2.0.6.0 - Production
CORE    9.2.0.6.0       Production
TNS for Solaris: Version 9.2.0.6.0 - Production
NLSRTL Version 9.2.0.6.0 - Production
SQL>
SQL> create table t ( name varchar2(20), id varchar2(1) primary key);
Table created.
SQL> create materialized view log on t;
Materialized view log created.
SQL> create public synonym syn_t for t;
Synonym created.
SQL> CREATE MATERIALIZED VIEW MV_t
REFRESH ON DEMAND
WITH PRIMARY KEY
AS
2    3    4    5 SELECT name,id
FROM syn_t;   6
Materialized view created.
SQL> CREATE MATERIALIZED VIEW LOG ON MV_t
WITH PRIMARY KEY
(name)
INCLUDING NEW VALUES; 2    3    4
CREATE MATERIALIZED VIEW LOG ON MV_t
ERROR at line 1:
ORA-12014: table 'MV_T' does not contain a primary key constraintRegards
Message was edited by:
Avinash Tripathi
null

Hi Nicloei,
Thanks for the reply. Actually i don't want any work around (Creating MVLOG on table rather than synonym is fine with me) . I just wanted to know it is actually an oracle bug or something else.
Regards
Avinash

Hi all, i'm new and facing a problem while creating a new file for Xcode. I can't select the box "with XIB for user interface" if the subclass is "UIViewController".this problem happen after i upgrade Xcode to 4.6 version.Appreciate for any help rendered.

Hi all, i'm new to Mac book & Xcode. I'm learning and facing problems while creating a new file for Xcode. Before i upgrade the software, i have no issue to create simple steps in apps. After upgrade Xcode to 4.6 version, i'm facing lot's of issue eg.
1) "the identity "iphone developer" doesn't match any valid certificate/ private key pair",
2) can't select the box "with XIB for user interface" if the subclass is "UIViewController"..
Appreciate for any help rendered.

Mikko777 wrote:So what is the best?
I wouldn't judge. I've been to Arch for a week, you know? But as said, it's VERY close to it.
What I dislike after a week is makepkg not handling dependencies automatically (which would be overhead, so probably not appropriate).
Mikko777 wrote:Also theres KDEmod for modular kde, dunno if its for 64 bits tho.
Don't actually need that as said ... I see no real benefit of having that other than not beeing a KDE user or having Gentoos useflags.
Mikko777 wrote:PS:You produce a lot of text and welcome smile
Yeah. Wonder why I'm still employed? So do I ...

Problem while creating URL iview (in EP7.0)

Hi,
I encountered a problem while creating URL iview (in EP7.0) as when I selected the iview template for creating the URL iview, the content area got displayed as
"No templates to display. You are not assigned to any existing templates."
please assist me in this regard.
Thanks,
Suri

Hi Manoj,
Thank you for your reply.
I am still getting the same messages even after creating the iview template in EP7.0
Created through:
content Admin --> portal content --> <folder>new --> iview --> seleting "Portal component - create an iView from a portal component contained in a deployed portal archive (PAR file)" <next> --> seleting "com.sap.portal.appintegrator.sap" <next> --> webdynpro <next> --> finish.
Open object for editing...--> Object is a Template to Yes.
Result :
content Admin --> portal content --> <folder>new --> iview --> seleting "iview template- create an iView from an existing iView template" <next> which displays the same message.
"No templates to display. You are not assigned to any existing templates."
Rgrds,
Suri.

Problem while creating sales order

Hi
   We are facing a problem while creating a sales order in R/3. The sales order number is getting generated. But we are not able to view the same in the backend meaning it is not there in the database. Any inputs would be of help.
regs
Steve

Hi everybody,
I've got a problem with this too. I use the BAPI_SALESORDER_CREATEFROMDAT2 with BAPI_TRANSACTION_COMMIT and the webdynpro shows me the document number created in R3 with a Success message. But when I go to R3 and try to display the created sales order, it doesn't exists. So... Maybe I'm doing something wrong with the BAPI_TRANSACTION_COMMIT. ¿Can anybody help me with this?
The code I use is this:
When the user pushes the SAVE button in the WebDynpro, this code executes:
    //@@begin onActionSave(ServerEvent)
     wdThis.wdGetSOCreaCustController().executeBapi_Salesorder_Createfromdat2();
     wdThis.wdGetSOCreaCustController().executeBapi_Transaction_Commit();
    //@@end
In the custom Controller I've got the code for those executions:
public void executeBapi_Salesorder_Createfromdat2( )
    //@@begin executeBapi_Salesorder_Createfromdat2()
     try {
          wdContext.currentBapi_Salesorder_Createfromdat2Element().modelObject().execute();
     catch (Exception ex) {
          wdComponentAPI.getMessageManager().reportException(ex.getMessage(), false);
     wdContext.nodeOutput().invalidate();
    //@@end
public void executeBapi_Transaction_Commit( )
     try {
          wdContext.currentBapi_Transaction_CommitElement().modelObject().execute();
     catch (Exception ex) {
          wdComponentAPI.getMessageManager().reportException(ex.getMessage(), false);
     wdContext.nodeOutput().invalidate();
    //@@end
¿Is something wrong? ¿Is something missing?

Problem while creating JCA connection to MDM server

Hi All,
I have restarted my mdm connector(com.sap.mdm.tech.connector) along with the applications related to Enrichment Controller. All applications restarted successfully. After that I tried accessing the URL
http://MDMSERVER:50000/MDM_EnrichmentController/WorkflowPolling?process=Monitor
but I am getting following exception in this page
Polling Repository
    name=Vijaybabu_Repo_on_MDMSERVER, status=No repository connection, error description=com.sap.mdm.net.ConnectionException: Problem while creating JCA connection to MDM server MDMSERVER
        Enrichment Request Threads
Could somebody help me pointing if something I have missed..
Thanks and Regards,
Manoj

hi Swarna,
I have verified the repository and found 0 fatal errors, 0 non-fatal erros and 0 warnings. I also checked the MDM Factory and Connector service is running fine.
The detailed exception is
Sep 2, 2008 12:49:40 PM com.sap.mdm.logging.MdmLogger error
SEVERE: Problem while creating JCA connection to MDM server 'KOLAPON'
com.sap.mdm.net.ConnectionException: Can not resolve JCA connection
     at com.sap.mdm.internal.session.JcaConnectionUtil.getJcaConnection(JcaConnectionUtil.java:119)
     at com.sap.mdm.internal.session.JcaConnectionUtil.getJcaConnectionAccessor(JcaConnectionUtil.java:62)
     at com.sap.mdm.internal.session.JcaConnectionAccessor.reserveConnection(JcaConnectionAccessor.java:70)
     at com.sap.mdm.internal.session.JcaConnectionAccessor.reserveConnection(JcaConnectionAccessor.java:59)
     at com.sap.mdm.repository.commands.GetRepositoryStatusCommand.execute(GetRepositoryStatusCommand.java:67)
     at com.sap.mdm.enrichment.common.ECAdminUtils.getRepositoryStatus(ECAdminUtils.java:125)
     at com.sap.mdm.enrichment.common.EnrichmentUtils.validateRepostiryConfiguration(EnrichmentUtils.java:889)
     at com.sap.mdm.enrichment.common.EnrichmentUtils.getCatalogManager(EnrichmentUtils.java:144)
     at com.sap.mdm.enrichment.workflowpolling.PollingThread.getCatalogManager(PollingThread.java:166)
     at com.sap.mdm.enrichment.workflowpolling.PollingThread.run(PollingThread.java:102)
Caused by: com.sapportals.connector.connection.ConnectionFailedException: Connection Failed: "ConnectionManager" is closed. Possible reasons: 1) connector "MDM Factory" is stopped or not started, 2) Connector service is stopped or has not been started.
     at com.sap.mdm.connector.connection.MdmConnectionFactory.getConnectionEx(MdmConnectionFactory.java:223)
     at com.sap.mdm.internal.session.JcaConnectionUtil.getJcaConnection(JcaConnectionUtil.java:108)
     ... 9 more
Caused by: com.sap.engine.services.connector.exceptions.BaseResourceException: "ConnectionManager" is closed. Possible reasons: 1) connector "MDM Factory" is stopped or not started, 2) Connector service is stopped or has not been started.
     at com.sap.engine.services.connector.jca.ConnectionManagerImpl.allocateConnection(ConnectionManagerImpl.java:122)
     at com.sap.mdm.connector.connection.MdmConnectionFactory.getConnectionEx(MdmConnectionFactory.java:213)
     ... 10 more
Regards,
Manoj
Edited by: Manoj Kumar Nanda on Sep 2, 2008 9:21 AM

Permission problem while creating cache group

Similar Messages

Maybe you are looking for