Personal quarantine for invalid users

Hello, 
1) how to prohibit on ironport to create personal Spam Quarantine for users who are invalid (nonexistent users of my domain and users from other email service (gmail.com)) and can i configure to drop messages for nonexistent users of my domain?
2) how to configure to see my outgoing messages that were put in Spam Quarantine in my personal quarantine?
Thanks.

Hey Alibek,
From my testing on my lab environment, i was able to manipulate the email in the way so it forces the email to be sent to the spam quarantine of the sender address rather than recipient (which is the design).
However to do so, it requires altering of the actual email in the event the email is seen as positive spam you'll re-write the recipient so that it goes into the sender mail box, but by doing so when the email is released it will not release back to the original recipient but to the actual sender.
This type of behaviour is not with the system design so I went forward with mail manipulation to achieve the results desired (to an extent)
What this means is, for testing purposes (before you decide if you want to put this into production)
Create an outgoing mail policy for your test address to be using where sender is your address.
On the anti-spam settings, change positive/suspected spam to 'deliver' but add a custom header like X-IP-Spam or so.
Create a content filter where it will look for this header, and if the header exists.
Action would be
Change recipient to -> The sender address
Change mail destination host -> 'the.euq.queue'
Then enable this content filter.
What this filter does is, it will re-write the original intended recipient to the sender address when emails are seen as spam and will send it to the rewritten 'recipient' spam quarantine.
Thus will go into the spam notifications when generated.
Note: When you release this email, it will release to the rewritten recipient and not the intended recipient.

Similar Messages

  • More hard bounce for invalid user from mail server

    Hi guys,
    this is my first post, but i have reade more post in this forum.
    my questions is:
    i have a domain into my ironport that receive more invalid recipient but the hard bouns are generate from mail server after the incoming mail pass trhough ironport.
    I don't have a ldap server
    you can help me for find a solution for block the invalid recipients?
    this is my idea:
    create a new dictionary with into all host of the domain and i apply a policy for control this dictionary.
    thi solutio have a problem that i must inser in dictionary every new user create in the mail server.
    regards
    Michele

    This would really be much easier if you had LDAP. If there is any way you could get LDAP to work in your environment, then that would make the IronPort end of things much easier. But if not, then you can do other things.
    Using a dictionary as you suggest would work, but it would mean accepting the bad messages and then bouncing them. This is because you can't consult a dictionary during the SMTP conversation. A better solution would be to put the allowable recipients directly into the RAT. That would cause the invalid recipients to be rejected during the SMTP conversation, which will reduce the amount of backscatter you generate.

  • Signing up for fon Fails (invalid user name or pas...

    Hello, We've been trying to sign up for fon and it keeps giving us the same error message! Invalid user name or password. The user name is the one on our contract also our email address. [email protected] this is working ok for emails etc. The password is likely the problem!! We've tried the original password provided on the contract (a bunch of letters and numbers) We've have changed our password to something specific to us! This does not work! Whilst having problems with email online support suggested we change our password again, so we did change password about a month ago! This also fails to work? So our email address and current working password for email access does not work! Can anyone tell s which password we should use or how we can get to sign up for fon! Chris

    Crizdee wrote:
    Hi, Thanks for the replies. The password provided when we signed I have tried many times and nada! I've read the FAQs and they say you can change your password so think this is the confusion? The fact we have changed passwords a few times! I'll see what support comes up with. Chris
    If you cannot opt in using the FON page, then there must be an issue somewhere.
    You have to use your full [email protected], which I expect that you are doing.
    You will have to try the BT Openzone/FON helpdesk, and see if they can see what the issue is.
    This is the signup page
    https://www.bt.com/wifi/secure/optin.do
    Just to confirm, this is the page you should be using to login.
    https://www.bt.com/wifi/secure/status.do?s_cid=con_FURL_btfon/status
    All new users are opted in by default, so you may find that that is the case for you, and the reason it is failing.
    Have you tried the normal login page ?
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • I ordered Illustrator for another user.  I received an invitation that was accepted, logged in and tried to change the account to the name and email of the person it was ordered for.  How can I get this changed and the invitation sent to the right person?

    I ordered Illustrator via creative cloud for another user.  I received an invitation that was accepted  and tried to change the account to the name and email of the person it was ordered for.  How can I get this changed and the invitation sent to the right person? 

    Cloud as a Gift https://forums.adobe.com/thread/1665610

  • Invalid user Id and password for signon to Application designer!!

    Hi There,
    I am trying to instal peoplesoft HRMS 9.0 on Vista and Oracle 10g release 2.
    - Installed Weblogic server
    - Tuxido
    - Installed Peopletools 8.49
    - Installed HRMS 9.0
    - Created initHCDMO and created the database
    - ran the scripts under the scripts/nt folder
    - logged onto datamover with 'system' as user and 'manager' as password and successfully ran the script
    - ran the rel849n.sql script and grants.sql after logging onto sqlplus with 'system' as user and 'manager' as password
    - after that when I am trying to login to the application designer in 2 tier mode, with PS as user and PS as password, I am getting the error 'Invalid User ID and password for signon'
    Can anybody please help me|?
    Thanks,
    Partho

    Thanks Nicholas,
    It solved my problem, and I have moved on with the rest of the steps and I am stuck at starting the Application server. I have ran all the datamover scripts and all other configurations for the database. I can login to the database, with sql plus with SYSADM, SYSADM.
    Quick-configure menu -- domain: ps
    Features Settings
    ========== ==========
    1) Pub/Sub Servers : No 15) DBNAME :[HCDMO]
    2) Quick Server : No 16) DBTYPE :[ORACLE]
    3) Query Servers : No 17) UserId :[SYSADM]
    4) Jolt : Yes 18) UserPswd :[SYSADM]
    5) Jolt Relay : Yes 19) DomainID :[TESTSERV]
    6) WSL : Yes 20) AddToPATH :[D:\oracle\product\10.1.0\Db_1\BI
    N]
    7) PC Debugger : No 21) ConnectID :[people]
    8) Event Notification: Yes 22) ConnectPswd:[peop1e]
    9) MCF Servers : No 23) ServerName :[]
    10) Perf Collator : No 24) WSL Port :[7000]
    11) Analytic Servers : Yes 25) JSL Port :[9000]
    12) Domains Gateway : No 26) JRAD Port :[9100]
    Actions
    =========
    13) Load config as shown
    14) Custom configuration
    h) Help for this menu
    q) Return to previous menu
    =================================
    when I boot the domain, I get the following error:
    Command to execute (1-10, q) : 1
    PeopleSoft Domain Boot Menu
    Domain Name: ps
    1) Boot (Serial Boot)
    2) Parallel Boot
    q) Quit
    Command to execute (1-2, q) [q]: 1
    psappsrv.cfg has changed archiving old one...
    Copying ps\Archive\psappsrv.cfg to ps\Archive\psappsrv_070609_1915_55.cfg
    Attempting to boot bulletin board...
    tmadmin - Copyright (c) 1996-1999 BEA Systems, Inc.
    Portions * Copyright 1986-1997 RSA Data Security, Inc.
    All Rights Reserved.
    Distributed under license by BEA Systems, Inc.
    Tuxedo is a registered trademark.
    No bulletin board exists. Entering boot mode.
    INFO: BEA Tuxedo, Version 9.1, 32-bit, Patch Level (none)
    INFO: Serial #: 650522264137-2065448083901, Expiration NONE, Maxusers 1000000
    INFO: Licensed to: Oracle-Peoplesoft-ISV
    Booting admin processes ...
    exec BBL -A :
    process id=492 ... Started.
    1 process started.
    Attempting to boot ...
    INFO: BEA Tuxedo, Version 9.1, 32-bit, Patch Level (none)
    INFO: Serial #: 650522264137-2065448083901, Expiration NONE, Maxusers 1000000
    INFO: Licensed to: Oracle-Peoplesoft-ISV
    Booting server processes ...
    exec PSWATCHSRV -A -- -ID 52849 -C psappsrv.cfg -D TESTSERV -S PSWATCHSRV :
    process id=3120 ... Started.
    exec PSAPPSRV -s@..\psappsrv.lst -s@..\psqcksrv.lst -sICQuery -sSqlQuery:SqlRequ
    est -- -C psappsrv.cfg -D TESTSERV -S PSAPPSRV :
    CMDTUX_CAT:1685: ERROR: Application initialization failure
    tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; initiating user error ha
    ndler
    tmshutdown -qy
    ==============ERROR!================
    Boot attempt encountered errors!. Check the TUXEDO log for details.
    ==============ERROR!================
    Do you wish to see the error messages in the APPSRV.LOG file? (y/n) [n] :y
    PSADMIN.2228 (0) [07/06/09 19:28:42](0) Begin boot attempt on domain ps
    PSWATCHSRV.3120 (0) [07/06/09 19:28:50] Checking process status every 120 second
    s
    PSWATCHSRV.3120 (0) [07/06/09 19:28:50] Server started
    PSAPPSRV.2104 (0) [07/06/09 19:28:51](0) PeopleTools Release 8.49 (WinX86) start
    ing
    PSAPPSRV.2104 (0) [07/06/09 19:28:51](0) Cache Directory being used: D:\PSHOME\a
    ppserv\ps\CACHE\PSAPPSRV_2\
    PSAPPSRV.2104 (0) [07/06/09 19:28:51](1) GenMessageBox(0, 0, M): Database Signon
    : Invalid user ID or password for database signon. (id=SYSADM)
    PSAPPSRV.2104 (0) [07/06/09 19:28:51](0) Server failed to start
    PSWATCHSRV.3120 (0) [07/06/09 19:28:52] Shutting down
    PSADMIN.2228 (0) [07/06/09 19:28:58](0) End boot attempt on domain ps
    Do you wish to see the error messages in the TUXLOG.070609 file? (y/n) [n] :y
    192842.PSOFTSERVER!PSADMIN.2228: Begin attempt on domain ps
    192844.PSOFTSERVER!tmadmin.436.428.-2: TMADMIN_CAT:1330: INFO: Command: boot -A
    192846.PSOFTSERVER!tmboot.876.3860.-2: 07-06-2009: Tuxedo Version 9.1, 32-bit
    192846.PSOFTSERVER!tmboot.876.3860.-2: CMDTUX_CAT:1851: INFO: TM_BOOTTIMEOUT is
    set to 60 seconds
    192846.PSOFTSERVER!tmboot.876.3860.-2: CMDTUX_CAT:1855: INFO: TM_BOOTPRESUMEDFAI
    L option is selected
    192848.PSOFTSERVER!BBL.492.3540.0: 07-06-2009: Tuxedo Version 9.1, 32-bit, Patch
    Level (none)
    192848.PSOFTSERVER!BBL.492.3540.0: LIBTUX_CAT:262: INFO: Standard main starting
    192850.PSOFTSERVER!tmboot.3456.3228.-2: 07-06-2009: Tuxedo Version 9.1, 32-bit
    192850.PSOFTSERVER!tmboot.3456.3228.-2: CMDTUX_CAT:1851: INFO: TM_BOOTTIMEOUT is
    set to 60 seconds
    192850.PSOFTSERVER!tmboot.3456.3228.-2: CMDTUX_CAT:1855: INFO: TM_BOOTPRESUMEDFA
    IL option is selected
    192850.PSOFTSERVER!PSWATCHSRV.3120.1072.-2: 07-06-2009: Tuxedo Version 9.1, 32-b
    it
    192850.PSOFTSERVER!PSWATCHSRV.3120.1072.-2: LIBTUX_CAT:262: INFO: Standard main
    starting
    192850.PSOFTSERVER!PSAPPSRV.2104.2068.0: 07-06-2009: Tuxedo Version 9.1, 32-bit
    192850.PSOFTSERVER!PSAPPSRV.2104.2068.0: LIBTUX_CAT:262: INFO: Standard main sta
    rting
    192851.PSOFTSERVER!PSAPPSRV.2104.2068.0: LIBTUX_CAT:250: ERROR: tpsvrinit() fail
    ed
    192851.PSOFTSERVER!tmboot.3456.3228.-2: tmboot: CMDTUX_CAT:827: ERROR: Fatal err
    or encountered; initiating user error handler
    192855.PSOFTSERVER!BBL.492.3540.0: CMDTUX_CAT:26: INFO: The BBL is exiting syste
    m
    192858.PSOFTSERVER!PSADMIN.2228: End boot attempt on domain ps
    ==========================**********************===================
    I have followed the steps as mentioned in the installation manual.
    Please help.
    Thanks Partha

  • ORA-01017: invalid username/password; logon denied FOR SYS USER

    Hello,
    I was usually login through the same password for sys user to log on to the database as sysdba, but last time i used " / as sysdba" to connect using local system administrative account which is connected very well and still connecting in the same way. The initializing parameter file set with the following parameter:
    remote_login_passwordfile=EXCLUSIVE
    Now if i use to connect the database server remotely using sys user, it gives me "ORA-01017: invalid username/password; logon denied" error and if i use the same login credentials on DB server machine using other local user accounts it is giving me "Insufficient Privilige" error. I can only connect now using local administrator account from DB server machine using " / as sysdba" statement.
    Kindly guide me the issue.

    When you use " / as sysdba" locally on server, you are using OS authentication which will bypass the password file and user/pass authentication.
    Looks like you have discrepancy between the password you use and real password. You can login " / as sysdba" and change your SYS password to a new one.
    When was last time you successfully login using password? What has changed since then?

  • Purchase Order Personal settings push button disable for particular user

    Hi
    I want to disable the acess to personal settings push button in purshase order creation (ME21N )..for selected user is it possible
    could any one help me in this issue
    Regards
    GS

    Hi
    I think transaction variant will help you check with abaper
    f you want to hide unwanted screens and fields in any standard SAP program without changing it, the use of the Transaction Variant is the best solution.
    check following link you may get some idea
    [http://wiki.sdn.sap.com/wiki/display/Snippets/TransactionVariant-AStepbyStepGuidefor+Creation]
    [http://www.****************/Tutorials/ABAP/TransactionVariant/Create.htm]
    Regards
    Kailas Ugale

  • Invalid User ID and password for signon - HRMS 9.0 on SQL2005

    I'm installing HRMS 9.0 using MS SQL Server 2005. I ran the "rel849u.sql" and grant.sql scripts. And now I'm at Task 7-4-3 "Updating PeopleTools Database Objects". When I launch the Application Designer, I get the following error when I try to login:
    Invalid User ID and password for signon
    I've triied logging in using 'sa', 'ps', and 'people' and still nothing works. Any suggestions?
    Thanks,
    Jerry

    Why do you want to connect with people user ? I'm sure, nothing in the doc is talking about connection through people user. PEOPLE is not an application user anyway, you don't have any chance to connect to AppDesigner. This database user is there only to check the connectivity grant, nothing more, it is used internally and should NOT be used.
    Nicolas.

  • DRM-61026: Unable to create user session for the following reason: Login failed. Invalid user name or password.

    All Im very new to Oracle DRM and Im trying to get the app setup on Windows server running SQL Server 2008.  When I try to login to the Web Client I keep getting this error.
    DRM-61026: Unable to create user session for the following reason: Login failed. Invalid user name or password.
    Can you please help

    This might be due to The 'Oracle Instance' path may not have been set to a path relative to the 'CSS Bridge Host' (i.e. the Foundation Services machine) on the Configuration > Host Machines > CSS > General tab of the DRM Configuration Utility.
    if this is the case then
    1. Open the DRM Configuration Console.
    2. Go to the Configuration > Host Machines > CSS > General tab of the DRM Configuration Utility.
    3. Ensure that the path in 'Oracle Instance' has been set relative to the 'CSS Bridge Host' (i.e. the Foundation Services machine defined in 'CSS Bridge Host').
    4. If corrections are made to 'Oracle Instance' then restart the DRM services to pick up the change.
    Thanks,
    ~KKT~

  • Setting a (corporate) Persona for all users

    Hi,
    I've designed a corporate Firefox persona and would like to either
    a) set it as the default persona when a user first opens Firefox
    b) roll it out to all existing users of Firefox where they have not had this persona applied before
    I'm on a Windows Active Directory network and all clients are WinXP/Win7 and have Firefox 3.6 installed.
    Does anyone have an idea of how I can achieve this?

    You can do that for new users via a file user.js in the default template folder for new profiles.
    C:\Program Files\Mozilla Firefox\defaults\profile\
    *http://kb.mozillazine.org/user.js_file

  • Person settings for user, F4 help

    Hi experts!
    In the GUI the users can make 'person settings', regarding Max. number of hits to be displayed . This is done by using: Help->settings-> F4 help, in the GUI.
    Can this be done from the WEB-side. Many of our users does not have access to the SRM through SAP LOGON. They have only access to the WEB. This is why they can't make the settings on there own in the GUI. Is the settings possible to make for the users through the WEB?
    Can anyone help me?
    Best regards Kim

    Hi
    I havenot tried but this is Not possible using WEB. The user need to login in sAP GUI for that user and then make the personalization himself.
    Regards
    - Atul

  • Always getting Invalid Pasword for Oracle User SYS

    Hello,
    I am installing IFS on Win XP.
    My database is on a remote machine.
    When I start with the configuration assistent of Oracle SMDK, he ask me to define the database to use.
    When I click on next I allways get the message Invallid pasword for Oracle user SYS
    I tested the connection via Oracle 9i client an that works properly.
    Can anyone help me please
    Thx in advantage.
    Database version: Oracle 9I Release 9.2.0.1.0
    Internet File system version: Oracle CM SDK

    I found the answer: getting the username with Get User Info on the User object gave me the username in a String. Using that, it worked like a charm.

  • Invalid XML returned for a user's Master Category list using Office 365 and EWS API (C#)

    Hi all
    Having a problem with one user's Master Category List. The Xml returned by the UserConfiguration call is corrupted (see below - superfluous /categories tag!) It is fine for other users.
    Wondering if anyone has seen this before?
    Thanks
    James
    <?xml version="1.0"?>
    <categories xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" default="" lastSavedSession="2" lastSavedTime="2013-12-18T15:39:00.837" xmlns="CategoryList.xsd">
    <category name="Red Category" color="0" keyboardShortcut="0" usageCount="6" lastTimeUsedNotes="1601-01-01T00:00:00.000" lastTimeUsedJournal="1601-01-01T00:00:00.000" lastTimeUsedContacts="1601-01-01T00:00:00.000" lastTimeUsedTasks="1601-01-01T00:00:00.000" lastTimeUsedCalendar="1601-01-01T00:00:00.000" lastTimeUsedMail="2013-12-17T10:51:29.974" lastTimeUsed="2013-12-17T10:51:29.974" lastSessionUsed="3" guid="{00000000-0000-0000-0000-000000000000}"/>
    </categories>
    ="Blue Category" color="7" keyboardShortcut="0" usageCount="2" lastTimeUsedNotes="1601-01-01T00:00:00.000" lastTimeUsedJournal="1601-01-01T00:00:00.000" lastTimeUsedContacts="1601-01-01T00:00:00.000" lastTimeUsedTasks="1601-01-01T00:00:00.000" lastTimeUsedCalendar="1601-01-01T00:00:00.000" lastTimeUsedMail="1601-01-01T00:00:00.000" lastTimeUsed="2012-03-26T08:16:46.052" lastSessionUsed="0" guid="{00000000-0000-0000-0000-000000000000}" renameOnFirstUse="1"/>
    <category name="Kids" color="4" keyboardShortcut="0" usageCount="7" lastTimeUsedNotes="1601-01-01T00:00:00.000" lastTimeUsedJournal="1601-01-01T00:00:00.000" lastTimeUsedContacts="1601-01-01T00:00:00.000" lastTimeUsedTasks="1601-01-01T00:00:00.000" lastTimeUsedCalendar="2012-03-26T08:49:30.305" lastTimeUsedMail="2012-09-03T14:33:29.077" lastTimeUsed="2012-09-03T14:33:29.077" lastSessionUsed="2" guid="{00000000-0000-0000-0000-000000000000}"/>
    <category name="Purple Category" color="8" keyboardShortcut="0" usageCount="2" lastTimeUsedNotes="1601-01-01T00:00:00.000" lastTimeUsedJournal="1601-01-01T00:00:00.000" lastTimeUsedContacts="1601-01-01T00:00:00.000" lastTimeUsedTasks="1601-01-01T00:00:00.000" lastTimeUsedCalendar="1601-01-01T00:00:00.000" lastTimeUsedMail="1601-01-01T00:00:00.000" lastTimeUsed="2012-03-26T08:16:46.052" lastSessionUsed="0" guid="{00000000-0000-0000-0000-000000000000}" renameOnFirstUse="1"/>
    <category name="Orange Category" color="1" keyboardShortcut="0" usageCount="6" lastTimeUsedNotes="1601-01-01T00:00:00.000" lastTimeUsedJournal="1601-01-01T00:00:00.000" lastTimeUsedContacts="1601-01-01T00:00:00.000" lastTimeUsedTasks="1601-01-01T00:00:00.000" lastTimeUsedCalendar="1601-01-01T00:00:00.000" lastTimeUsedMail="2012-09-03T14:35:33.995" lastTimeUsed="2012-09-03T14:35:33.995" lastSessionUsed="2" guid="{00000000-0000-0000-0000-000000000000}"/>
    <category name="Yellow Category" color="3" keyboardShortcut="0" usageCount="6" lastTimeUsedNotes="1601-01-01T00:00:00.000" lastTimeUsedJournal="1601-01-01T00:00:00.000" lastTimeUsedContacts="1601-01-01T00:00:00.000" lastTimeUsedTasks="1601-01-01T00:00:00.000" lastTimeUsedCalendar="1601-01-01T00:00:00.000" lastTimeUsedMail="2012-09-03T14:35:57.543" lastTimeUsed="2012-09-03T14:35:57.543" lastSessionUsed="2" guid="{00000000-0000-0000-0000-000000000000}"/>
    <category name="Synchronised with Infinity" color="19" keyboardShortcut="0" usageCount="0" lastTimeUsedNotes="1601-01-01T00:00:00.000" lastTimeUsedJournal="1601-01-01T00:00:00.000" lastTimeUsedContacts="1601-01-01T00:00:00.000" lastTimeUsedTasks="1601-01-01T00:00:00.000" lastTimeUsedCalendar="1601-01-01T00:00:00.000" lastTimeUsedMail="1601-01-01T00:00:00.000" lastTimeUsed="1601-01-01T00:00:00.000" lastSessionUsed="0" guid="{00000000-0000-0000-0000-000000000000}"/>
    <category name="Processed by iCapture" color="20" keyboardShortcut="0" usageCount="0" lastTimeUsedNotes="1601-01-01T00:00:00.000" lastTimeUsedJournal="1601-01-01T00:00:00.000" lastTimeUsedContacts="1601-01-01T00:00:00.000" lastTimeUsedTasks="1601-01-01T00:00:00.000" lastTimeUsedCalendar="1601-01-01T00:00:00.000" lastTimeUsedMail="1601-01-01T00:00:00.000" lastTimeUsed="1601-01-01T00:00:00.000" lastSessionUsed="0" guid="{00000000-0000-0000-0000-000000000000}"/>
    </categories>

    If its only one user then its probably unlikely that EWS is at fault and what is happening is because its been corrupted in the MAPI property for Master categories list. (eg from the looks of some of the entries "Synchronised with Infinity" there is a third
    party app they may have modified this list ?). Exchange doesn't validate what you try to post to that property so if something has posted bad data then that's what you'll end up with.
    I would suggest you open the Master categories list in MFCMapi see
    http://blogs.technet.com/b/outlooking/archive/2010/05/14/useful-tools-while-troubleshooting-outlook-issues-3-mfcmapi.aspx and verify what's in the property. If it looks okay in a MAPI editor and bad in EWS then it maybe a bug but you need to be able to
    reproduce it with other users, more then likely you just need to delete the Master Caterogies list and start again for that user.
    Cheers
    Glen

  • DROID Razr M Invalid User Endpointid

    I attempted to configure my hotmail account in new Razr M- the account shows on the phone but inbox is empty and I am unable to send or receive mail. When it syncs or when I attempt to delete account i get the following message : Invalid user endpointid. Any help would be appreciated.

        Hi there Nycchris!
    Using email on your smartphone is definitely important! I'm so sorry that you're having issues with your hotmail! I will be delighted to provide some suggestions to get this up and running.
    First you may want to try putting the phone into Safe Mode:
    http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=63868
    These are the steps for adding a personal account:
    http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=64299
    These are the steps for removing a personal account:
    http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=64205
    Let me know if these steps worked!
    Thanks,
    MelissaM_VZW
    Follow us on Twitter @vzwsupport

  • How to use single JSP page for multiple users.

    Hi ,
    I am doing messenger kind of program using JSP and tomcat server.
    When i type message it is showing in the some div. If some other person request for the same page by giving my IP address and jsp page, he should able to see what i have typed on page so far.
    how can i do that one . can any one guide me .
    Thanks in advance.

    SuneelGoodatJava wrote:
    Hi ,
    I am doing messenger kind of program using JSP and tomcat server.
    When i type message it is showing in the some div. If some other person request for the same page by giving my IP address and jsp page, he should able to see what i have typed on page so far.
    how can i do that one . can any one guide me .
    Thanks in advance.HTTP is a request/response protocol. You can't do what you're suggesting without "pushing" what you type to all the other users. That's not the way HTTP works. Maybe an applet and servlet.
    %

Maybe you are looking for

  • Rescheduling for the third party items

    Dear Experts, I have one issue. In the sales order there are TAN and TAS items. TAN items are delivered and done with PGI. For TAS items PO created and then MIRO also done. Now some new items are added in the sales order. Why is it that the system re

  • ITunes9 broke my Firewire driver!

    I use an external Weiss DAC with my Mac mini as a media server. I've installed itunes 9 and now my Weiss Firewire driver doesn't work - system profile reports an unknown driver and Audio setup can't see the DAC. Uninstalling/reinstalling doesn't chan

  • How can I deternmine what apps are running on my Mac Book Pro

    Hoe can I determine what applications I have open and running on my Mac Book Pro

  • Image Gallery issues with Lightbox2 - please help!

    Hello there, I am using Lightbox2 image gallery.  The loading.gif and close.gif aren't showing up and I think there's an issue with the path in the lightbox.js file.  The loading and close gifs are located in the Images gallery so I changed the path

  • How do I unlock a swatch on Illustrator CS5?

    I opened a PDF in Illustrator and it has 4 Spot color swatches. Two of them will not delete or let me alter them and I need to change them to CMYK. I've tried reopening the document, restarting my computer and copying and pasting everything into a ne