PI 7.3 AEX - XI 3.0 message protocol in the SOAP adapter.

Hello,
My client's landscape is on SAP PI 7.3 AEX(Java only installation) and SAP ECC 6.0 EhP4.
I have configured a HTTP-Proxy scenario. For the proxy messages to go into the SAP ECC system, I have configured a SOAP Receiver adapter in PI 7.3 AEX.
I have created a service interface in ESR in PI 7.3 and generated the proxy in the SAP ECC system.
I have configured the SOAP receiver to use the XI 3.0 protocol and by using the Addressing Type as 'URL Address'. The URL that I am using is " http://<SAP_ECC_server>:PORT/sap/xi/engine?type=entry ".
When I try to test the scenario, the messages are not reaching the target ECC destination and in the SOAP Receiver communication channel, I am getting the following error:
Information:                Delivering to channel: SOAP_RECEIVER
Information:                MP: processing local module localejbs/sap.com/com.sap.aii.af.soapadapter/XISOAPAdapterBean
Information:                SOAP: request message entering the adapter with user Guest
Error:                          SOAP: call failed: java.io.IOException: unable to create a socket Information                 SOAP: sending a delivery error ack ...
Now, in my client estate there is also a SAP PI 7.11 system, I have replicated the service interface in the ESR on 7.11 and regenerated the proxy in SAP ECC. When I now run the scenario, it works.
Just stressing here on the point that, the abap proxy generated from SAP PI 7.3 ESR did not work(but worked when I generated the abap proxy from SAP PI 7.11 ESR) when configured using the XI protocol on the SOAP adapter.
ALso, I have gone through the 'Note 1247043 - Release Restrictions for EHP 1 for SAP NetWeaver PI 7.1'.
Is the behaviour I am facing a release restriction on SAP PI 7.3
Need suggestions from anyone who has tried configuring this scenario, is there anything that I have missed?
I am happy to share more info if required...
Thanks in advance,
Best Regards,
Karthik

HI Karthik,
Did you able to resolve this in PI 7.3??
Even i am also facing the same issue in receiver soap adapter for abap server proxy:
SOAP: error occured: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: unable to create a socket
MP: exception caught with cause com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: unable to create a socket
Transmitting the message to endpoint <local> using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: unable to create a socket
Please let me know how did u resolve this?
Thanks,
Prasanthi

Similar Messages

Messages failing in the SOAP adapter with the errror

HI
I am getting the below error in the SOAP adapter monitoring . can any body tell what does "No route to host: Connect" mean .
could some one help us on resolving this .
Error Exception caught by adapter framework: No route to host: connect
Error Delivery of the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: No route to host: connect: java.net.NoRouteToHostException: No route to host: connect. Setting message to status failed.
Error The message status set to FAIL.
Error Returning synchronous error message to calling application: com.sap.aii.af.ra.ms.api.RecoverableException: No route to host: connect: java.net.NoRouteToHostException: No route to host: connect.
thanks and regards
sandeep

Hi!
First please confirm whether you are working on XI or PI 7.1 ?
because in XI you need to generate WSDL manaually via Tools>Define Web service-Giving Input..and in XI you need to test the SOAP scenario from external tool like Altova xml spy tool kit or else SOAP client tool.
In PI 7.1::
You can publish directly the web service in the SERVICE REGISTRY from sender agreement onwards.
once it is published you can check the status on your interface in service registry as CONFIGURED..Okay
Here you can test directly in service registry...
According to your error check ocne agan even though you gone through all the steps..
1. Check whether the SOAP service is active or not in SICF>SAP>bc>XI>Service-->SOAP.
2. sicne after generating wSDL u can get one url right that URL itself acts as a gateway to enter the source data into XI..
lets give to the source team to try with XI super uID adn PWD as authentification.
3. Also please STOP ur communication Channel and start once again.
4. Please check whether the WEB Service is configured correctly or not.
Regards::
Amar Srinivas Eli

Using Message ID in the SOAP header (Sender)

Hi Experts,
The scenario is SOAP to IDoc.
We have requirement to insert the Message ID in the SOAP header for avoiding duplicate messages from the SOAP client.
Please note SOAP client is unable to support URL parameter, so we have to use Message ID in the SOAP header.
So please suggest how to insert the Message ID in the SOAP header (WSDL) , and do we need to implement any mapping to retrieve the Message ID value from the SOAP header - to create a PI message.
Thanks in advance.
MK

But I want to know how we update the WSDL with the required Feild(messageID).
I dont think you can update the wsdl url to include the messageID field...if you notice the other fields in the wsdl you will find all are static...however your messageID will be dynamic.....so just ask the SOAP client application to append the MessageId field and send the message.....at runtime the message id will be extracted by PI......did you test the scenario?...if no then test it once so that if there is an error we will come to know...
Regards,
Abhishek.

Message Level Security with SOAP Adapter

Hi,
I need to use Message Level Security with my SOAP Adapter. Please let me know if anyone has done the same in the past?
What are the steps I would need to do? How can I use WSS based security in the SOAP Adapter?

Hi,
Message-level security is recommended and sometimes a prerequisite for inter-enterprise communication.
It improves communication-level security by adding security features that are particularly important for inter-enterprise
Message-level encryption is required if message content needs to be confidential not only on the communication lines but also in intermediate message stores.
Refer
How to use Client Authentication with SOAP Adapter
XML Encryption Using Web Services Security in SAP NetWeaver XI
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f0650f56-7587-2910-7c99-e1b6ffbe4d50
http://help.sap.com/saphelp_nw04/helpdata/en/a8/882a40ce93185de10000000a1550b0/frameset.htm
Thanks
swarup

Following message failing in sender soap adapter

Hi all,
The message below fails when it is sent to our adapter with a 500 error from a webmethods server. however if I pull the soap message out of the mime, and use our client test tool, it posts fine.
What is wrong with the message below?
Message-ID:<28413146.1155935375732.JavaMail.webmethods@exshaw>
MIME-Version: 1.0
Content-Type: multipart/related; type="text/xml"; boundary=X-K12456234-X
X-K12456234---X
content-type: text/xml;charset=UTF-8
content-transfer-encoding: 7bit
Content-ID: <SES>
<?xml version="1.0" encoding="UTF-8"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/" xmlns:xsd="http://www.w3.org/1999/XMLSchema"
xmlns:xsi="http://www.w3.org/1999/XMLSchema-instance">
<SOAP-ENV:Header xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"></SOAP-ENV:Header>
<SOAP-ENV:Body>
<nr1:ServiceAcknowledgementRequest xmlns:nr1="http://sap.com/xi/SAPGlobal/Global">
        <MessageHeader>
                <ID schemeID="0240">74000003400000000020060329170547</ID>
                <CreationDateTime>2006-03-29T17:05:47Z</CreationDateTime>
                <SenderParty>
                        <InternalID schemeID="PartnerID" schemeAgencyID="SSR_100">6000000011</InternalID>
                </SenderParty>
                <RecipientParty>
                        <InternalID schemeID="PartnerID" schemeAgencyID="SSR_100">0000000236</InternalID>
                </RecipientParty>
        </MessageHeader>
        <ServiceAcknowledgement>
                <ID schemeAgencyID="SSR_100" schemeAgencySchemeAgencyID="ZZZ">7400000340</ID>
                <BuyerID>7400000340</BuyerID>
                <CreationDateTime>2006-03-29T17:03:55Z</CreationDateTime>
                <Note>Service Entry Sheet#1</Note>
                <Item>
                        <ID>10</ID>
                        <Quantity unitCode="EA">5.0</Quantity>
                        <Product>
                                <TypeCode>1</TypeCode>
                                <Note>Test Service</Note>
                        </Product>
                        <Price>
                                <NetUnitPrice>
                                        <Amount currencyCode="USD">1.0</Amount>
                                     <BaseQuantity unitCode="EA">1.0</BaseQuantity>
                               </NetUnitPrice>
                       </Price>
                       <PurchaseOrderReference>
                               <ID>2000000742</ID>
                               <ItemID>1</ItemID>
                       </PurchaseOrderReference>
                </Item>
        </ServiceAcknowledgement>
</nr1:ServiceAcknowledgementRequest>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
X-K12456234---X

Hi Richard,
I think, it is because of the Autorization Problem..i.e
Webservice is not able to execute by SOAP adapter.. So Security Roles etc..
Check this SAP SOAP Note for FAQ-856597 (Question No 1)
A similar symptom is mentioned in this note....
Regards,
Abhy

Failed in Message Mapping for Sender SOAP Adapter

I am using a synchronous Sender SOAP adapter for sending SOAP messages using HTTP security protocol. I am trying to send SOAP messages to XI and then to RFC-R/3. And Responses back from RFC to XI and then to SOAP. I am getting an error for failed in message mapping in SXMB_MONI for converting SOAP messages to RFC. When I debug it in Message Mapping in Integration Repository, it works fine.
Any help is appreciated.
Thanks in advance!
Mrudula

Hi,
try to do a full cache refresh
regards,
Jakub

How to capture the message recived to the soap server from client -onMessag

Hi,
I want to send JAXM message from client to server
and In server print the message to a text file.
My client
SOAPConnectionFactory scf = SOAPConnectionFactory.newInstance();
SOAPConnection con = scf.createConnection();
MessageFactory mf = MessageFactory.newInstance();
SOAPMessage msg = mf.createMessage();
SOAPPart part = msg.getSOAPPart();
SOAPEnvelope envelope = part.getEnvelope();
SOAPBody body = envelope.getBody();
javax.xml.soap.Name name = envelope.createName("Text");
javax.xml.soap.SOAPBodyElement bodyElement = body.addBodyElement (name);
bodyElement.addTextNode ("Some Body text");
This is the way i'm accessing now in theserver
public SOAPMessage onMessage(SOAPMessage msg) {
try {
FileOutputStream out; // declare a file output object
PrintStream p;
out = new FileOutputStream("E:/Accepter.txt");
p = new PrintStream(out);
int count = msg.countAttachments();
p.println("write");
msg.writeTo(out);
This creates the text file and write unwanted characters
1)How do i access the message content and store in a text file or
String variable??
2)How do i access the message content in name wise in he case of many messages recived to the server
Thanks for your time .
suda

* To save a message to a file.
File file = new File("file.xml");
msg.writeTo(new FileOutputStream(file));
* To recreate a message (without attachments) from a file.
MessageFactory mfactory = MessageFactory.newInstance();
SOAPMessage msg = mfactory.createMessage();
SOAPPart part = msg.getSOAPPart();
StreamSource streamSource =
new StreamSource(
new FileInputStream("file.xml"));
part.setContent(streamSource);
// to view the recreated message
msg.writeTo(System.out);
* You should also be able to use DOMSource to recreate the message as:
DocumentBuilderFactory factory =
DocumentBuilderFactory.newInstance();
factory.setNamespaceAware(true);
DocumentBuilder builder = factory.newDocumentBuilder();
Document domDoc =
builder.parse(
new File("file.xml"));
Source domSource = new
javax.xml.transform.dom.DOMSource(domDoc);
MessageFactory mfactory = MessageFactory.newInstance();
SOAPMessage msg = mfactory.createMessage();
SOAPPart part = msg.getSOAPPart();
part.setContent(domSource);
Hope this helps.

PO message processing error at SOAP Adapter

Hello All,
After an PO scenarion setup and performing one messageprocessing in found following error at RW Message Monitoring:
Exception caught by adapter framework: SOAP: response message contains an error XIServer/UNKNOWN/ModuleUnknownException - com.sap.aii.af.mp.module.ModuleException: either no channelID specified or no channel found for the specified party, service, and channel name, MessageServlet(Version $Id: //tc/aii/30_REL/src/_adapters/_soap/java/com/sap/aii/af/mp/soap/web/MessageServlet.java#13 $) at com.sap.aii.af.mp.soap.web.MessageServlet.doPost(MessageServlet.java:412) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_
Please could someone tell me where the problem is?
Regards,
Jochen

Hi Jochen
Check if thse threads can help you
Now based on error description -
Refer this SAP Note - 856597 QUestion no 1 -for SOAP adapter configuration- i.e URL
Also have a look into this thread-
SOAP Problem
SOAP Error when testing messages.
*************Reward points if helpfull*************

Monitor XML-Messages sent by the XIF adapter

Hello to everybody,
I am looking for a possibility to monitor all XML-messages that are sent by the XIF Adapter to external servers. I would like to see the detailed XML messages.
Does there exist anything?
Thanks and regards
Michaela

Hi Michaela
XML messages can be sent to the SAP infrastructure where the XML messages can be mapped in to other XML schemata.CRM business connector communication.IDocs should be used:An IDoc transfer is quicker in comparison to SOAP/XML because the IDoc document contains no metadata information(tags)unlike an XML document ,and therefore ,the size of documents sent down line is substainally smaller in comparison.More information about XIF adapter may be found in the SAPNet vai the alias:crm:ci about the external systems.
Cheers

Not able to see Message Content while using SOAP Adapter

Hi freinds
I am working on following scenario
Web Application ---> SOAP Adapter ---> XI ---> RFC Adapter ---> SAP R/3
Web application is using the WSDL file which I generated from XI.
Now everything is going fine & I am even getting the XML data in SAP R/3 ( Order is getting created ) but in RWB under message monitoring I am getting " <b>Content of message deleted to save memory</b> " for message content.
Even in SXMB_MONI for that timeframe it is showing " <b>No messages available for selection</b> ".
Can you tell me why I am not getting the message content & the message itelf in SXMB_MONI. What I need to do in order to get the message content while monitoring.
Best Regards
Lalit
P.S --> I am able to see the message content if I am using File Adapter in place of SOAP Adapter

Hi
After adding the LOGGING_SYNC parameter with value 1. I am able to see the messages in sxmb_moni but they have status as " System Error - Restart not possbile " with the following error ::
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
<SAP:P1>402</SAP:P1>
<SAP:P2>ICM_HTTP_TIMEOUT</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText><html><head><title>SAP Web Application Server Error</title> <style type="text/css"> body { font-family: arial, sans-serif;} </style> </head> <BODY text="#172972" link="#808080" vlink="#808080" alink="#8e236b" bgcolor=white leftmargin="0" topmargin="0" marginheight="0" marginwidth="0"> <table height="61" width="100%" border="0" cellspacing="0" cellpadding="0"><tr><td background="http://sapxidev:50000/sap/public/icman/img/bluebar_tile.gif" height="30"><table> <tr> <td width=5></td> <td width=20% nowrap><font face=arial size="-1" color=white>SAP Web Application Server </font></td><td width=75% align="right" nowrap><font face=arial size="-1" color="white"><a href="http://help.sap.com/">Help </font></td><td width=5% nowrap></font></td> </tr></table> </td><td rowspan=2 width=122 height=61 valign=top><img src= "http://sapxidev:50000/sap/public/icman/img/theme.jpg" width=122 height=61 border=0 alt="SAP"></td> </tr><tr><td background="http://sapxidev:50000/sap/public/icman/img/graybar_tile.jpg" height="31"> </td></tr> </table> <br><br> <table width=800> <tr><td width=50 nowrap> </td><td> <H2>500 Connection timed out</H2><br>Connection timed out (-5) <br><hr> <table border="0"> <tr><td>Error:</td><td>-5</td></tr> <tr><td>Version:</td><td>6040</td></tr> <tr><td>Component:</td><td>ICM</td></tr> <tr><td>Date/Time:</td><td>Wed Dec 21 13:59:55 2005 </td></tr> <tr><td>Module:</td><td>icxxthr_mt.c</td></tr> <tr><td>Line:</td><td>2559</td></tr> <tr><td>Server:</td><td>sapxidev_XID_00</td></tr> <tr><td>Detail:</td><td>Connection to partner timed out</td></tr> </table> <p></p> </td></tr></table> <table><tr><td width=50 nowrap></td> <td nowrap><FONT SIZE=-1><a href="http://www.sap.com/">© 2001-2003, SAP AG</a></FONT></td></tr></table></SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when receiving by HTTP (error code: 402, error text: ICM_HTTP_TIMEOUT)</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
As my payload was of 100 records with 15 fields I guessed that this can be the reason I am getting timed out. So next time I just send 2 records & this time no error & everything went fine.
Now one thing I need to do is to increase the TIMEOUT value with the help of <b>OSS Note 824554</b>.
But still in RWB ( with 2 records also ) under message monitoring I am getting " <b>Content of message deleted to save memory</b> " for message content.
My objective now, is to display the payload which is coming from Web Application via SOAP Adapter in RWB. Can you help me in this.
Best regards
Lalit Chaudhary

Exception Message: Io exception: The Network Adapter could not establish th

This error is showing up in my one of my logs. Can someone help me troubleshoot. Any ideas as to why it might be occurring? It is intermittent in so far as, not found all the time. I did not see it yesterday, and saw it 2 times on Monday. Could it be a tnsnames.ora issue?
The database is on remote server and the client is local. We seem to get the error on the jbc connection back to the local machine. The dblinks on both machines appear to be working.
oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:189)
oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:231)
oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:345)
oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:431)
oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.java:515)
oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:345)
oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:150)
oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:108)
mydb.dataaccess.jdbc.ConnectionFactoryAbstract.getConnection(ConnectionFactoryAbstract.java:38)
mydb.dataaccess.jdbc.ConnectionFactoryGdb.createConnection(ConnectionFactoryGdb.java:23)
mydb.dataaccess.jdbc.DataAccessJdbcGDB.getThreadConnection(DataAccessJdbcGDB.java:71)
mydb.dataaccess.jdbc.DataAccessJdbcGDB.getConnection(DataAccessJdbcGDB.java:64)
mydb.dataaccess.jdbc.DataAccessJdbc.initialize(DataAccessJdbc.java:700)
mydb.dataaccess.jdbc.DataAccessJdbc.checkPreSet(DataAccessJdbc.java:113)
mydb.dataaccess.jdbc.DataAccessJdbc.setString(DataAccessJdbc.java:140)
mydb.dataaccess.jdbc.ScrapieXImpl.getProgramCustomer(ScrapieXImpl.java:165)
mydb.dataaccess.jdbc.DataXJdbcImpl.getProgramCustomer(DataXJdbcImpl.java:619)
mydb.ejb.ProgramEJB.getProgramCustomer(ProgramEJB.java:220)
ProgramSB_StatelessSessionBeanWrapper12.getProgramCustomer(ProgramSB_StatelessSessionBeanWrapper12.java:366)
mydb.services.UserServices.getProgramCustomer(UserServices.java:1898)
sun.reflect.GeneratedMethodAccessor127.invoke(Unknown Source)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:324)
mydb.services.UserHandler.invoke(UserHandler.java:102)
$Proxy0.getProgramCustomer(Unknown Source)
mydb.web.Actions.OrderScrapieAction.getScrapieCustomer(OrderScrapieAction.java:419)
mydb.web.Actions.OrderScrapieAction.doSave(OrderScrapieAction.java:142)
mydb.web.Actions.BaseAction.dispatchAction(BaseAction.java:141)
mydb.web.Actions.BaseAction.execute(BaseAction.java:94)
org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:431)
org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236)
org.apache.struts.action.ActionServlet.process(ActionServlet.java:1196)
org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:432)
javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:765)
com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317)
com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:793)
com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:208)
com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:125)
com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
java.lang.Thread.run(Thread.java:534)

Hi,
This errors is not much useful to me, but looks like that you have a "intermittent" connection problems.
Did you already Googled these errors below ?
"oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:189)
oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:231)
oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:345)
oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:431)"
>>The database is on remote server and the client is local. We seem to get the error on the jbc connection back to the local machine. The dblinks on both machines appear to be working.
You are connecting into a remote database from an client, but clarify about DBlinks. Do you talking about Database Links objects on a database ?
Cheers

SOAP Adapter - Using Fault Message

Hi all,
I have developed a Synchronous Integration Scenario which receives a SOAP request to the SOAP adapter, calls an ABAP proxy in SAP ECC to post some information and return a response or a fault to the sender.
This all works fine, I am using a fault message in the ABAP proxy to record errors and return them to the SOAP adapter using the fault mapping. Again this all works fine. However when an application error is identified and a fault message returned to thre SOAP adapter, I had expected that the error details in the fault message to be packaged up in a standard SOAP fault and returned to the sender. Instead the fault message details are sent as the payload in the SOAP body of the response.
Can anyone provide information on if it is possible to return the fault message as a standard SOAP fault instead of in the SOAP body of the response.
Thanks
Gary

Dont think this is possible in standard.
As an alternate, maybe you can select option Do not use SOAP Enevlope int he sender SOAP Adapter and thereby the entire SOAP Message will enter the mapping and you would need to use a XSL or Java mapping to strip the SOAP Envlope in the mapping for the request and like wise in the response mapping you would need to add the SOAP Enevlope to the response.
For the fault message mapping you need not add the SOAP Envelope.
Not a standard solution, but can be tried if the requirement is really worth it. Otherwise I think the Fault Message will continue to be sent as the payload in the the SOAP Enevlope as this is how the SOAP adapter works.
Regards
Bhavesh

SOAP Adapter + asynchronous message + Runtime Workbench

Hi
I have problem with error monitoring in Runtime Workbench -> Message Monitoring
I have SOAP adapter deployed on Apache Axis.
I have flow SOAP->XI->SOAP (asynchronous mode)
It works great until receiver adapter generate error.
I can see error message in defaultTrace log but in
Message Monitoring-> Details I see only "SOAP: response message
contains an error Application/UNKNOWN/APPLICATION_ERROR - application fault".
SOAP message from receiver adapter (with error) looks like that
<?xml version="1.0" encoding="UTF-8"?>
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<soapenv:Body>
    <soapenv:Fault>
      <faultcode>Client</faultcode>
      <faultstring>Internal Server Error</faultstring>
      <detail>
        <myfaultmessage>
          <type>RABAX_STATE</type>
          <message>Divide by 0 (type 1).</message>
        </myfaultmessage>
        <ns1:hostname xmlns:ns1="http://xml.apache.org/axis/">pslupkowski</ns1:hostname>
      </detail>
    </soapenv:Fault>
</soapenv:Body>
</soapenv:Envelope>
I'm think that this message is not well formated and
Adapter Engine can't find some tags during parsing this
message. Any ideas how to solve this problem?
I'm just want to see error description from <myfaultmessage> tag in Message Monitoring

Hi,
Did you check the log on adapter engine?
http://<host>:<port>/MessagingSystem/monitor/monitor.jsp
Take a look to this monitor, here you can see both messages (request and response).
Cheers,
Ricardo.

I need to secure SOAP message sent into SOAP adapter, how to?

Hi guys,
My scenario uses SOAP and I need to secure this SOAP message sent into SOAP adapter. As I have read in the documentation, HTTPS is possible only on the SOAP receiver adapter. But my is SENDER.
COuld you help me please, how to solve it? Or post some link? Or, if you have your own approach, to let me know?
Thanx, Peter

Hi,
you can use SSL with the sender adapter. Please see the extract of the SOAP Adapter FAQ (Note #856597) below:
<b>Q:</b> Can I use SSL for my sender adapter?
<b>A:</b> Yes. Normally, the SOAP adapter servlet runs on the engines HTTP port. But you can activate the engine's HTTPS port so that this servlet can receive messages sent to the HTTPS port. See the documentation about the J2EE engine's security configuration.
I am afraid, I haven't yet tried this myself, so you will need to consult the J2EE documentation.
Regards,
HC

1:n message mappings using JDBC-soap

Hi
The sender is linked using a JDBC adapter and is sending in a message which consists of several rows
For each row I need to call a webservice using the SOAP adapter.
How is the message mapping, interface mapping configure to do this
If I have to use ccBPM, how do you define the loop so that I can loop around each row
thanks

Hi.
You don't need to use a BPM for this, you can use MULTI MAPPING.
Follow bellow a link about it:
[Blog Series: Multi-Mapping without BPM - Yes, itu2019s possible!|/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible|/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible]
[Help Link: Multi-Mappings |http://help.sap.com/saphelp_nwpi711/helpdata/en/21/6faf35c2d74295a3cb97f6f3ccf43c/frameset.htm|http://help.sap.com/saphelp_nwpi711/helpdata/en/21/6faf35c2d74295a3cb97f6f3ccf43c/frameset.htm]
Best Regards.
Bruno

PI 7.3 AEX - XI 3.0 message protocol in the SOAP adapter.

Similar Messages

Maybe you are looking for