PI changing encoding on the file

Hi,
I am using a File to File scenario without File Content Conversion for File transfer.
But, the file to be transferred contains some Chinese unicode characters which use UTF - 8 encoding.
When PI moves the file the characters become illegible.
Current Settings in Adapter:
File Type : Text
File Encoding : Not specified
What changes in settings of Sender or Receiver adapter should be made so that
the file gets transferred as it is.
Thanks & Regards,
Vinit Deshmukh

Hi Vinit
Change it in both the channel and see if it works or not.
If it does not work, then send the file as binary

Similar Messages

Whenever I close down Photoshop CS5 I get the message: "Could not save Preferences because the file is locked or you do not have the necessary access privileges. Use the get info command in Finder to unlock the file or change permission on the file or enc

Whenever I close down Photoshop CS5 I get the message: "Could not save Preferences because the file is locked or you do not have the necessary access privileges. Use the get info command in Finder to unlock the file or change permission on the file or enclosing folders." What on earth does it mean? How can I stop this message from appearing?

See here:
I cannot save recent images.

How do I stop pop up that asks me, Do you want to save changes to doc... before closing? I have made no changes only printed the file. Using Adobe Reader DC, Windows 7 64 bit.

How do I stop pop up that asks me, Do you want to save changes to doc... before closing? I have made no changes only printed the file. Using Adobe Reader DC, Windows 7 64 bit.
This is very annoying and we need this stopped as we have made no changes to any of the adobe files. Please advise how to do this.
Customer Service DCC

I first tried the version without the deflated stream (so everything uncompressed) against the online repair tool to check/analyse it @ https://www.pdf-tools.com/osa/repair.aspx
And it says no error found, but the reader still want to save it when closing so i still had no clue at this point.
Fortunately, i finally found what was wrong with my generated PDF.
In my xref table, each object reference was not end by a full EOL, i only did put a newline char.
Now i have "carriage return" "newline" which is the full EOL and the reader is happy and close the file silently.
As suspected i did not follow correctly the specs on xref table
Now i'll go and figure what i did wrong with the deflate filter
Thanks for your help.

How to set encoding of the file when using UTL_FILE

Hi,
We are using HRMS 11i applications. 11.5.10.2 version. Two languages are installed in our instance. American English and Canadian French.
We have requirement to send employee details in a text file to third party vendor. We are using UTL_FILE to write details to the text file from PL/SQL procedure.
The generated output file has encoding as "UTF8". Where as vendor is not able to process this file. They required encoding as "ANSI".
How can we change the encoding to "ANSI" ?
Values of character set parametrs are as follows.
NLS_CHARACTERSET UTF8
NLS_NCHAR_CHARACTERSET UTF8
Any inputs are highly appreciated.
Regards,
Veerababu.

You should take a look at the UTL_FILE documentation. As far as I know standard UTL_FILE calls write to the file system in the database character set. There are mirrored calls, but those write to the file system in UTF8.
You may want to look at the UTL_RAW.CONVERT function. You may be able to use that in conjunction with the UTL_FILE.PUT_RAW API to write out data in the correct character set. To be honest, I've never tried this approach.
Edited by: Centinul on Sep 21, 2012 8:16 AM

How to change location of the file?

Hi All,
I am using this code to convert infopath view to html, everything working fine but i want to change the file location
public string ConvertViewToHtml()
try
byte[] sourceFile = null;
XPathNavigator root = MainDataSource.CreateNavigator();
//string myViewName = this.CurrentView.ViewInfo.Name.Replace(" ", string.Empty);
string myViewName = "Email";
string myViewXslFile = myViewName + ".xsl";
// Create the xsl transformer
XslCompiledTransform transform = new XslCompiledTransform();
transform.Load(ExtractFromPackage(myViewXslFile));
// Generate a temporary HTML file
string fileName = Guid.NewGuid().ToString() + ".htm";
string filePath = Path.Combine(Path.GetTempPath(), fileName);
using (XmlWriter writer = XmlWriter.Create(filePath))
// Convert the XML to HTML
transform.Transform(root, writer);
writer.Close();
// Return the HTML as a string
sourceFile = File.ReadAllBytes(filePath);
return System.Text.Encoding.UTF8.GetString(sourceFile);
catch (Exception ex)
return "<html><body>Unable to convert the view to HTML <p>" + ex.Message + "</p></body></html>";
By default file get stored in this location 'C:\Users\TEMP.EGA\AppData\Local\Temp\64aa2af2-4f7f-44e9-afdc-6783f7f4007d.htm'. But I want to store in different location. How to achieve
this? Thanks in advance!

Hi,
You can change the line of code below
string filePath = Path.Combine(Path.GetTempPath(), fileName);
to
string path= "c:\\temp";
string filePath = Path.Combine(path, fileName);
More information:
https://msdn.microsoft.com/en-us/library/fyy7a5kt(v=vs.110).aspx
Best Regards
Dennis Guo
TechNet Community Support

Disable change password in the file sharing window

I have two labs, 25 computers per lab. One is running Lion, the other is running Snow Leopard. When file sharing to other computers in both labs on our network, it is required that you enter a password before you can access the files. Lion offers the option to change that password for certain computers when file sharing with them. I need to disable this feature so students cannot change the passwords randomly. The students may not be able to change the password for other Lion computers, due to parental controls that I have set, I'm not positive, but they can change the password for a Snow Leopard computer, and my network people do not want me putting Lion on all of the computers, therefore this is not an option. Is there any way for me to disable this feature?

Hey, password file is a binary file, you are not suppose to do that.
Drop prassword.ora file
Use ORAPWD utility to create a new password file.
Jaffar

The Change time of the file is getting modified when no changes are made to the file content

While doing save operation of a MS-WORD file, (in my example "1M.doc" ) with client (Windows 8) and server(either Win 2008 R2 or Win2012 R2). Observing the following scenario.
After Renames are done(eg, xx.tmp renamed to 1M.doc) , all the file handles are being closed one by one.
When the xx.tmp file is closed, immediately followed by Create of 1M.doc, the LastWrite time values between Close and Create are same but LastChanged time values are different. The LastChanged and LastWrite times are noted from
the Close Response and Create Response packets.
No modification is done on the file between this last close and next create. So, why LastChanged time values are different for the file? We are observing this almost everytime with Win8- Win2k8R2/Win2012R2, but not observed
till now with Win8-Win2012.

Hi,
Is only word files have the issue? You could refer to the articles below to troubleshoot the issue:
The "Modified time" file attribute of a registry hive file is updated when an application loads and then unloads the registry hive file without making any changes on a computer that is running Windows Server 2008 R2 or Windows 7
http://support.microsoft.com/kb/983544
File “Date modified” property are not updating while modifying a file without closing it.
http://blogs.technet.com/b/asiasupp/archive/2010/12/14/file-date-modified-property-are-not-updating-while-modifying-a-file-without-closing-it.aspx
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Cannot change and display the file in document CV02N

Hi All,
When i create a document in CV01N transaction ,upload a word file ,
save and change the status, for some reason the uploaded word document file goes in unchecked (unlocked ) mode.
and this doesn't happen daily, its one of those situations when user does something funny.
Later when the Approver wants to approve the document in CV02N he cannot open the file because (of error "cannot be accessed") its not uploaded properly in content server and cannot change status to Reject because of error "Status can only be set when all originals are stored".
Please can anyone help me to find out what might be the problem for these kind of scenarios and how do i deal a document in a status where the the uploaded file is in unlocked status.
NOTE: Around 2500 users using the present process and i get only 2 to 5 scenarios like the above once in a while . so looking for a permanent fix for this problem.
Thanks in Advance
Sud
Edited by: Sud on Jul 22, 2011 12:36 PM

Dear Sud,
I think we should focus here on the reason for the error message (26 172) and therefore I would recommend you to see the information under http://wiki.sdn.sap.com/wiki/display/PLM/26172-Reasonforthiserror
Best regards,
Christoph

How do you change name of the files before sending files to FTP site?

Hi guys,
my environment is SQL Server 2008 R2.
Currently, I'm trying to figure out how to tackle the following project:
I have over 100 files that I need to send via FTP on daily basis.
Before doing so, I must change the extension of the file to a specific characters stored in a sql server table, for example if the file name is Store1.txt the new name will be Store1.111
I was hoping that you guys can point me in the right directions :-)
Codernater

I would use a script task for renaming, Pass the data from the SQL table with the extension you want via a object variable to the script task iterate the files in the directory and rename as requried
this code and link would help you
http://stackoverflow.com/questions/12347881/renaming-files-in-folder-c-sharp
DirectoryInfo d = new DirectoryInfo("....");
FileInfo[] infos = d.GetFiles();
foreach(FileInfo f in infos)
File.Move(f.FullName, f.FullName.ToString().Replace("abc_","");
Abhinav http://bishtabhinav.wordpress.com/

Pattern changes after reopening the file.

I was trying to remain the posiition of the pattern applied to an object after I moved (or copied and moved) the object, so I selected the option "Transform Pattern Tiles" < General < Preference or even selecedt the option in the Transformation panel. The result was what I wanted, the moved/copied and moved object has identical pattern style as the original object.
However, after I saved the file, closed it, and then reopened it, the position of the pattern of the moved object somehow changed.
To demonstrate this issue, I've created a pattern like the following:
I applied this pattern to a sqaure, which appears like this:
I ensure both settings in the Preference and Transformation Panel, and then I dragged the square while holding the Alt to create a duplicate in aother position, which of course resulted in an identical square exactly like the above image.
Now the file has two identical squares in it, I saved the file and closed it, and then I reopend the file.
The second square now appears like this: , in which the pattern has different distribution style than previously. The only way I know to solve this is to expand the object and then the pattern style will be consistent after being moved.
I'm just wondering, is it a bug, the way it is, or did I just overlook any settings?
The file I used to test is in the attachment for you to see for yourself. I suggest you copy more than a few and save the file, close the file and then reopen it. Because sometimes you might just get lucky.
Note: I've seen this issue in both Illustrator CS and CS2.

Hi Scott,
Thanks for replying. Let me rephrase my question:
Before moving the object with pattern, I did check the option "Transorm Pattern Tiles".
The result is what I want: a duplicate with exactly the same pattern distribution hehavior. But after I close the file and reopoened it,
the pattern distribution on the duplicate object somehow changed and different from the original object.
I tried to delete AIPres file. But the issue remains.

Is movie metadata changes written to the file in iTunes 10.1?

Hello.
I'm putting together a bunch of home videos for my parents (made in iMovie) for Christmas and I'm using iTunes 10.1 to populate the metadata (genre, movie title, comments, etc.) — is this data written to the file or is it stored in an iTunes DB? My concern is, like how iTunes handles cover artwork, will all the metadata be lost when I give them these videos (since they'll be importing into their own iTunes library) or will the information I edit in iTunes move with the files? If this information is not written to the file (ie. it'll be lost when I give them the videos), can anyone suggest an iTunes add-on that will allow me to edit these files already imported into iTunes?
Also, I assume the cover art isn't written to the file, like with music files — is this true? For example, if I add a cover to these videos (which I'm making myself as JPGs), if I add the cover art in iTunes, will it be written to the file so it appears as cover art when I give the files to my parents and they import into iTunes?
Any info would be appreciated!!!
k.

Meta X works great for editing the metadata.
-> http://www.kerstetter.net/index.php/projects/software/metax
I'm putting together a bunch of home videos for my parents
How are you giving them these videos? As a regular, playable DVD (such as burned with iDVD)?
If so, tags are not needed as they are not written to the playable DVD.
However, it is good to add the metadata so you have the info in the file on your computer.

Can I change preferences for the File Find window

In the search window that opens when you go to File > Find, how do I save changes I make to the search parameters? I want the same settings every time that window pops up. Is this possible? Thanks.
tlbb

Hi, and a warm welcome to the forums!
Are they the settings that are available in System Preferences>Spotlight?

Option to change fields on the file print function?

Would like an option in the print file function to include the comments field. I have updated over half my library's comments field to include the top 100 year end standing for songs from 1955 to 1988 (Oldies Fan!). It would be a great report to share with friends and other Oldies fans.

The Three Best Alternatives for Security Questions and Rescue Mail
    1. Use Apple's Express Lane.
          Go to https://expresslane.apple.com ; click 'See all products and services' at the
          bottom of the page. In the next page click 'More Products and Services, then
          'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Forgotten Apple
          ID security questions' and click 'Continue'. Please be patient waiting for the return
          phone call. It will come in time depending on how heavily the servers are being hit.
     2. Call Apple Support in your country: Customer Service: Contact Apple support.
     3. Rescue email address and how to reset Apple ID security questions.
A substitute for using the security questions is to use 2-step verification:
Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

Changing the setting name in the file name

How do I change en masse the file name in a compressor batch?. Say, instead of having the default codec name, IE "Apple Pro Res," I could choose something unique for myself.
Or how do I just get rid of it the setting tag without using a custom destination?
Studio X wrote:
"You can permanently solve the issue by making a simple change in the Preset.
Click on your preset to load it into the Inspector in Compressor
Click on the "actions" icon underneath the Names & Descriptions fields.
Go down to Default Destinations and set it to " Source w:o additional names"
Save the preset.
Now every time you apply the preset you'll get the file placed back into the source folder without the additional info in the file name.
One caveat - make sure that your new file name does not exactly match (including the suffix) the original file. If it does, you'll overwrite the original.
x"
However I did not find this "w:o additional names" option.
I am running Compressor V 3.5.3 - is that the reason?
Cheers,
Edwin

Could be a version thing.
In 3.5.3 it works like this:
You first need to create a new Destination:
In compressor select the Destination Tab (1), then press the PLUS sign (2).
Select Local (if it's going to be on your computer) or Remote (if it's on a network)
Compressor will ask you which folder. In this example I created a new folder, called 'testingfolder' (3).
In the Inspector then you can choose the naming options. Which is now right by default (4). So you don't have to alter that.
Now do all steps as Studio X described, but a slightly different:
"You can permanently solve the issue by making a simple change in the Preset.
Click on your preset to load it into the Inspector in Compressor
Click on the "actions" icon underneath the Names & Descriptions fields.
Go down to Default Destinations and set it to " Source w:o additional names"
...set it to 'testingfolder'
Save the preset.
Now every time you apply the preset you'll get the file placed back into the source folder without the additional info in the file name.
One caveat - make sure that your new file name does not exactly match (including the suffix) the original file. If it does, you'll overwrite the original.
[The latter is only true if the destination folder is the same as the source folder, which I'd strongly advise not to do.]
Rienk

I accidentally changed permissions of all the files of my system drive (10.8.5)

Hi,
By mistake, I accidentally changed the permissions for all the files of my entire system drive. On the root of my system drive, I've put on "Read and Write" for Admin, staff, and everyone, and applied this change to all the files of my entire drive.
Since I did that, I experiment issues with some applications which worked perfectly before that : when I try to open some applications (not all, just some), it tells me things like "something is wrong in the installation of the application", or "can't open the following application", or it simply just doesn't open it.
I have to mention I have no Time Machine or backups of my drive, as I bought my mac three days ago and spent the two last days installing plugins and applications on my drive (for audio production). So I can't replace my drive with a backup of the system before I accidentally changed all permissions.
Also, I repaired permissions on my drive with the disk utility, but all the app that doesn't work are from external developpers (not apple).
Is there any way to "repair" this without having to reinstall all the app that are causing problems ? It would be a pain for me as I just spent 48hours installing everything...
Thanks for anyone that could help...

You need a backup, preferably more than one. This is an example of why.
Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
If the problem is still there, try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - Mavericks

PI changing encoding on the file

Similar Messages

Maybe you are looking for