Picking a value dynamically in OLT

Hi,
Following is the load test scenario for which I want to pick a dynamic value:-
A user login to an application, do a search and a list gets displayed. following is the list example for this:-
ID Name
123 test
456 test1
789 test2
012 test3
"ID" is a link field. So when I record my sciript i click on the first ID file (123), and a new page got displayed.
Now what I want is that the "ID" field should be picked dynamically for every user. Like first user click on "123" and next user click on "456" and so on.
Please let me know if this is possible in OATS.

Hi,
In the code you should see a http.solveXPath() or similar that extract the value you clicked on, e.g. 123
http.solveXpath(varName, xpath, lastValue, resultIndex)
The resultIndex arg will probably be 0 (i.e. the first match) but you can adjust this to match further down the list so for 456 you would replace with 1. You should be able to do this automatically pretty easily.
Cheers,
Jamie

Similar Messages

Pass values dynamically to the WHERE clause in SFAPI

Hi there
We have a requirement to pass values dynamically (in the run-time of the interface) to the WHERE condition to our SFAPI query.
Eg -
SELECT person, personal_information, address_information, phone_information, email_information, employment_information, job_information, compensation_information, paycompensation_recurring, paycompensation_non_recurring, job_relation, accompanying_dependent,         global_assignment_information, direct_deposit, national_id_card, person_relation
          FROM CompoundEmployee
          WHERE last_modified_on >= to_date('LAST_RUN_DATE') AND
                       last_modified_on <= to_date('CURRENT_RUN_TIME')
LAST_RUN_DATE is stored in a custom entity for which we execute another OData query. The custom entity is updated with the CURRENT_RUN_TIME once the interface has been executed successfully. So the next time the interface is run it picks up the LAST_RUN_DATE from the custom OData entity.
SAP PO has the functionality to run a dynamic query for OData adapters. Refer to Note 2051137 - PI Successfactors adapter : Dynamic odata query and single synchronous sfapi query
Eg - select fields from position (this is what you state in OData query path in the comms channel; this is static); and you have an advanced tab in comms channel where you mention dynamicquery and set it to true (this points to a XSD which has the keyword TOP, SKIP & FILTER in it).
This gets the filter values passed from the BPM from another query (from a OData cust_table).
So the whole query is - select fields from position filter field a = x field b = y etc. Field a field b are fields in position that are you passing values x and y in run time of the interface.
SAP PO also has the advanced tab feature for SFAPI for dynamic query.
Question is -
how to use it?
has anyone implemented this before?
What does XSD will look like?
How do we pass values to the fields to the Where clause for SFAPI.
Any ideas are welcome!
Regards
Arijit Das

After you have added a new where clause on the detail VO, try re-executing VO's query by DetailVO.executeQuery()
If it doesn't work try re-executing the MasterVO's query after you have added the where clause on the detail

List item problem - couldn't pick a value

Dear professionals,
i used Andreas's code to dynamically populate list item (http://andreas.weiden.orcl.over-blog.de/article-28957008.html) and it works fine (nice work Andreas)!
My problem is that i couldn't pick any value from list - I see many values, but there is now way to choose any of them. (video and picture are here: http://imageshack.us/g/3/property.jpg/)
Also, i spotted that it's not possible to use Combo-box property along with encapsulating procedure - the form is just not opened...
I'm using JRE 1.6, 10gR2 (10.1.2) F&R...
Does anyone know why is that ?
Thanks in advance,
Adnan
Edited by: adnanBIH on Jul 5, 2011 8:33 AM

Andreas Weiden wrote:
You didn't show us the query you use to populate the list. I would guess that all entries have the same value for the VALUE-column of the select, so that they are all "identical" from the value.Andreas bravo ! :))
Yes, you're right - my select statement looks like this:
select a value, "Word" label
from emp;I'll fix it tomorrow - thx once again, generic procedure is excellent !
Adnan

How to populate values dynamically & allows user to edit some other columns

Hi..I am new to Apex..please help me to sove it out...
I have a scenario like editing the some of the Customer details where as one field is dynamically populating from a different table.
Columns like Include, Frequency, Communication, Address and Exclude has to be displayed in tabular format and data should be stored in a table called "om_customer_catalog ".
In this "Communication " column value is dynamically populating from a table called "om_customer_settings" and the no. of records in the om_customer_settings table may vary time to time as per the settins in the Admin module.
I want the user to edit all details except Communication column for all the rows which is displayed and the no. of rows should be displayed dynamically as per the settings.
how can i achieve this?...which way i need to proceed like whether report kind of thing..or someother way..
hope some reply....
More Column details:
Include - a Check box with editable(values Y or N)
Communication - text field with display only(values like Promotional Email, All Email etc.)
Frequecny - Drop downbox with editable(values Annually/Monthly/Weekly etc)
Address - Drop down with editable(static values like Me, Father, Mother,Brother etc)
Exclude Reason - text field with editable(any text value)
Apply - a button for saving the changes
thanks in advace...
renjish

Hello Renjish,
Solution is quite tricky, You have to make a procedure which select each row of your tabular form and executes the update statement (customized).
e.g
to select each row of table use
begin
FOR I in 1..APEX_APPLICATION.G_F01.COUNT
LOOP
insert into table_name values(APEX_APPLICATION.G_F01(i),'PENDING',sysdate,'RESOURCE','','','','');
end loop;
end;
here APEX_APPLICATION.G_F01(i) will return the value of the first column of selected row. Pick the values and make a cutomized update command.
Regards,
bhanwar

Assign values dynamically to radio button

I am creating an online test. I will need to display answer choices from the table. I created radio buttons for these answer choices and I could put the labels dynamically by using
Set_Radio_Button_Property('block_name.radio_group_name', 'radio_button1',LABEL,cursor_name.field_name);
Now I have problem to set radio button values dynamically. Should I use when_radio_changed event?
Any help would be appreciated.

I really appreciate your help.
My intention is to display the test on the screen.
That means I need to display all questions and answer
choices for each one dynamically. Based on the answer
choice type (radio button or checkbox or drop down
etc) I will need to assign the values to them and
display on the screen. So far I could display
questions and answer choices on the screen and set
the label property for each radio button.
Do you know what is the syntax to assign value to
each radio button? First I will need to store user's
answers in a table. For that I need to know what
answer they selected. I wasn't sure how to do that.
ThanksAs I said, the values cannot be assigned dynamically. Thus you will store the answers in code (perhaps in an array?) and your radio buttons will be 1,2,3,4 etc.
In WHEN-RADIO-CHANGED you can retrieve the value from the array using the radio button value. Then store that value.
e.g. Your screen shows
What is the sound of one hand clapping?
o Blue
o Yes
o 12
These labels will be set dynamically, but the values for the radio buttons will be 1,2,3. If they pick "Yes", your radio button will be 2. You then get the value you really want from answer_array(2), where you put it when you retrieved the question details. Then you insert that into your users_answers table.

How to pick max value from a column of a table using cursor and iteration

Hello Everybody
I have a table loan_detail
and a column in it loan_amount
now i want to pick values from this table using cursor and then by using iteration i want to pick max value from it using that cursor
here is my table
LOAN_AMOUNT
100
200
300
400
500
5600
700i was able to do it using simple loop concepts but when i was trying to do this by using cursor i was not able to do it .
Regards
Peeyush

SQL> SELECT MAX(sal) Highest_Sal,MIN(sal) Lowest_Sal FROM emp;
HIGHEST_SAL LOWEST_SAL
       5000        800
SQL> set serverout on
SQL> DECLARE
2    TYPE tmp_tbl IS TABLE OF NUMBER INDEX BY BINARY_INTEGER;
3    sal_tbl tmp_tbl;
4    CURSOR emp_sal IS
5      SELECT sal FROM emp;
6    counter INTEGER := 1;
7 BEGIN
8    FOR i IN emp_sal LOOP
9      sal_tbl(i.sal) := counter;
10      counter := counter + 1;
11    END LOOP;
12    DBMS_OUTPUT.put_line('Lowest SAL:' || sal_tbl.FIRST);
13    DBMS_OUTPUT.put_line('Highest SAL:' || sal_tbl.LAST);
14 END;
15 /
Lowest SAL:800
Highest SAL:5000
PL/SQL procedure successfully completed.
SQL> Even smaller
SQL> DECLARE
2    TYPE tmp_tbl IS TABLE OF NUMBER INDEX BY BINARY_INTEGER;
3    sal_tbl tmp_tbl;
4    CURSOR emp_sal IS
5      SELECT sal FROM emp;
6    counter INTEGER := 1;
7 BEGIN
8    FOR i IN emp_sal LOOP
9      sal_tbl(i.sal) := 1;
10    END LOOP;
11    DBMS_OUTPUT.put_line('Lowest SAL:' || sal_tbl.FIRST);
12    DBMS_OUTPUT.put_line('Highest SAL:' || sal_tbl.LAST);
13 END;
14 /
Lowest SAL:800
Highest SAL:5000
PL/SQL procedure successfully completed.
SQL> Edited by: Saubhik on Jan 5, 2011 4:41 PM

Picking the value of PBEG and PEND incase of multiple entries 2002 on a day

Hi Experts,
Our client's business requirement is to have provision handling multiple entries multiple entries of same subtype of IT 2002 on same day with different Time entries.For example one IT 2002 Styp 1 has entry 10 am to 14 pm & other entry of IT 2002 styp 1 as 14 pm to 16 pm.
In this scenario I want to have TWT with start time of 1st 2002 record i.e 10 & another TWT with end time of last 2002 record i.e. 16.
I have written a PCR as
OUTTPORIGS Origin status
    COLOP*     TIP >TOP curr.TType
P
    HRS=PBEG   Set
    ADDDB90T3 Add to day balance
    HRS=PEND   Set
    ADDDB90T4 Add to day balance
But its giving me value of 2002 start time as (1014=24) & END time (1416=30) respectively.
Since TIP will have entries with origin E & A as well with P and any entry can be 1st or last entry depending on time, I can't use VRSTFIRST & VARSTLAST.
Please suggest me how to handle such scenario through PCR. Is there a way we can make decision on From & To of TIP entries.
You can also suggest me if such need can be handled at masterdata level so that we can have just one entry
Regards
S S
Hi All,
Please also suggest me a better operation to pick the value of PBEG and PEND incase of multiple entries various subtypes of 2002 on same day.I need to compare start- end time of 2002 with 2011 entries and calculate total attendence hrs. Once again, I can't use VRSTFIRST & VRSTLAST as 1st & last TIP entry could be come from any infotype viz 2011,2002, 2001.
Regards
Sunita
Edited by: Sunita on Feb 5, 2011 10:02 AM

If you want to do it the T-SQL way, follow this article I wrote on deleting duplicates..
http://sqlsaga.com/sql-server/how-to-remove-duplicates-from-a-table-in-sql-server/
To read about what ranking functions does and how will they help you use this link..
http://sqlsaga.com/sql-server/what-is-the-difference-between-rank-dense_rank-row_number-and-ntile-in-sql-server/
Please mark as answer, if this has helped you solve the issue.
Good Luck :) .. visit www.sqlsaga.com for more t-sql code snippets and BI related how to articles.

In Drop Down by Index how can i pass default value Dynamically

Hi Friends,
In Drop Down by Index how can i pass default value Dynamically.Please help me.
Thanks in advance.
Regards,
Kumar.

hi,
if you want the value to be defaulted only the first time you execute the program then write the code which suman has mentioned in the views method
wddoinit.
Regards
Sajid

In J1IS system is not picking net value from PO automatically

Dear Experts,
I want to send rejected material to vendor back, so I have done return delivery against MIGO material document, in MIGO, in Excise Invoice Tab i have selected no exicse Entry document. At the time of J1IS sytem is not picking net value from PO. This field is editable. Our requirement is, system should pick net value from PO.
In this case I am not makeing any RETURN PO
Could any body guide me? Is there any configuration required?
Thanks & Regards,
Trupti.

There is no link between p.o & excise inv. creation using J1IS.
In J1IS,Enter return material document no,Ref doc. type - MATD,Doc Year,series group,excise group,series group & finally vendor in selection.
In excise invoice automatically details like material code,qty will appear.
You need to enter assesable value & excise duties manually.
Note :
Be cautious while entereing excise duties bcoz you may be returning partial quantity to vendor,
so calculate excise duties in a seperate excel sheet before entering it in J1IS.

How to pick up values of particular tag from XMl file & store into an array

Hi , i m using sax parser to read below xml file.
<dvd-list>
<dvd>
<id>001</id>
     <title>Bollywood</title>
     <name>Lord of the rings</name>
     <length>150</length>
     <actor>Jonathan Austin</actor>
     <actor>Nicole Kidman</actor>
</dvd>
<dvd>
<id>002</id>
     <title>Hollywood</title>
     <name>Taare Zamin pe</name>
     <length>200</length>
     <actor>Amir Khan</actor>
     <actor>Darsheel</actor>
</dvd>
<dvd>
<id>003</id>
     <title>Bollywood</title>
     <name>Matrix reloaded</name>
     <length>150</length>
     <actor>Mickel</actor>
     <actor>Hally Berry</actor>
</dvd>
</dvd-list>
& i want to store it into an arraylist .
I declared arraylist a class var .
i want to store all ids into an arraylist ...
below is my code public void endElement (String namespaceURI, String localName, String qName, Attributes atts)
    throws SAXException
         if(qName.equals("id"))
   for (int i = 0; i < atts.getLength (); i++) {
                list.add(i,atts.getValue (i));
       // showData ("</"+qName+">");
    }not working ... plz help me in this regard
thanks a lot

thanks , my id tag has no attribute...
but sir again i m facing 1 problem
to pick up values of tag i wrote below code public void startElement (String namespaceURI, String localName, String qName, Attributes atts)
    throws SAXException
         System.out.println("localName"+qName);
         str=qName;
    public void characters (char buf [], int offset, int len)
    throws SAXException
         String s = new String(buf, offset, len);
      System.out.println("char>>"+s);
      s.trim();
      if(str.equals("id"))
           list.add(s);
          if(str.equals("name"))
               list.add(s);
          if(str.equals("title"))
               list.add(s);
          if(str.equals("length"))
               list.add(s);
          if(str.equals("actor"))
               list.add(s);
    public void endElement (String namespaceURI, String localName, String qName, Attributes atts)
    throws SAXException
    }here my list size shud be 5 ideally but it is showing 30!!!!
also debug stmt sysout(char>>+s); is showing series of
char>> ...it means charactes(0 method is being called several times ...while my xml contains
<dvd-list>
<dvd>
<id>001</id>
     <title>Bollywood</title>
     <name>Lord of the rings</name>
     <length>150</length>
     <actor>Jonathan Austin</actor>
</dvd>
</dvd-list>
plz help me in this regard to understand this flow....
thanks a lot in advance

How to pass tag name and value dynamically in the output of PCo notification?

Hi,
I have a requirement to develop such a scenario where there can be multiple no of tags in PCo (Say 10) but there will be single notification to push the tag name when the value got changed and the changed value to MII. for any value change for any of the tag, the notification will be trigger. So As per my knowledge I have to pass the tag name and value dynamically in the "output" tab of the notification. But need your support to find out how to pass them dynamically.
Thanks in advance.
Regards,
Suman

Hi Suman/Jeedesh,
As per Pco notification, it will trigger whenever any of the tag value changes in Agent instance subscription items.
For above issue, My suggestion
1. Create DB table name TAGLIST with 200 tags as rows in columns (Tagname, TagValue)
2. Based on notification trigger, create a transaction and update values w.r.t TagNames in above table
3. Next time, when notification trigger with fresh value for any of the tag, cross check with existing TagName with Value and update in DB table.
4. And in the mean time, send those Tag details vie mail trigger or as per requirement
Instead of creating 200 notification, above is a just alternate way suggestion to achieve dynamic tag value change notification.
Hope it might solve your problem
Regards,
Praveen Reddy

Infoview pick list values and CR parameter values are not the same

Hello All
We have created created Crystal Reports based upon BW Query using Static Parameters as recomended by SAP. When we run the query in InfoView the Pick List is dynamically updated and returns the correct data for selection. When The Crystal Report opens and you wish to navigate through the report using the parameter selection the selection criteria has not been maintained by BW and does not match the Pick List.
Can you please advise if there is any way to make this work?
We ar using Crystal Reports 2008 version 12.3.1.684
on BOBJ XI 3.1
Any help would be appreciated,
Phillip

Hello Ingo
What is strange that in InfoView the pick list is only dynamic the Parameters when the document is open (in InfoView) are not dynamic. An example would be Searching on Material. In Info view the pick list provides all the materials to select from. Once though the report is open the parameter list on the left hand side could be seen as blank as it refers to the static list that is not manually maintained within Crystal Reports or provide a list of details that has no reference to the dynamic selection as returned from BW as it is a static list that was loaded with Crystal Reports Designer on creation.
What we are wanting to achieve is that Info View Pick List is Dynamic and the Parameter list that can be used to navigate within the document once opened is dynamically refreshed to be the same as the Pick List provided by BW and InfoView.
Is this possible?
With CR Designer if we use Do Not Show, Info View no longer provides this parameter on the left hand side.
If we use Editable the list provided in InfoView is equal to the static list as maintained within CR Designer.
We have not tested Read Only Yet so I am not sure if this could be the solution or not.
Any ideas would be of great benefit
Phillip
Edited by: Phillip L on Nov 26, 2010 5:22 PM
Edited by: Phillip L on Nov 26, 2010 5:23 PM

Dealer Invocie -MIRO is not picking excise value from MIGO it takes from PO

Hi all,
      I have a issue in dealer invoice.
     I have raised a PO., made goods receipt against that PO. Entered the excise duties, education cess and Higher education cess manually in MIGO. Automatic posting is done for that excise invoice. When MIRO is raised it picks the value from PO.
   It is a new plant. The issue is in this plant only. The dealer invoice works fine for all the other plants.
Kindly help to resolve this issue.
Regards.

Hi ,
please refee below
     Creating a Purchase order with Zero Tax code
     Capturing of Excise invoice in J1IEX/MIGO.
     Activation of MRP indicator during capturing
     Posting the Excise Invoice captured.
     Invoice processing for the Purchase order
In the MIGO screen, you can find that the excise base value is defaulted as the PO price and the excise duties are zero.
Now manually enter the respective excise rates for Basic excise duty (BED), Educational cess (ECS) and Higher Educational cess (SECESS).
The excise base is changed such that the sum of the excise base value and the excise duties remain the same as the PO price. The excise base is reduced by the excise duty value and the differential amount is split amongst the relevant excise duty components.
In the miro screen change the base value as same that you have maintained in MIGO.
also refer the note which i am insisting so that you can able to meet your req.
Regards,
velu

Vendor consignment pick up value when doing stock count

Hi experts!
I'm seeking your kindness to help me solve a problem.My client has done a stock count of vendor consignment stock.But why the system pick up the value of the stock when they do adjustment to the system which this item should not have any value as it was under vendor consignment?
When i go to MI20 to check display the list of inventory differences,there's 1200kg with total price rm5146. the qty suppose to be no value but why there's 1200kg in booking?
Any idea? your help is much much appreciated..

Hi Pardeep,
I still can't solve this problem.. Please help me.
My client did stock count for vendor consignment stock. The problem is the system pick up value when she did that. It suppose to be no value since it's not their stocks. but then i notice that there's a posting via mvt type 702 at the same day. i suspect she did not freez the invetory book during stock count. So now she doesn't want the value to be picked up. What can i do to solve this? Should i advise her to do reverse mvt type - 701? Please help me ASAP..

Passing values dynamically Froman 'INLINE Query' to a 'SUB QUERY'

If I am using an line query which uses a SELF JOIN subquery
how can I pass the values from the Inline Query to Subquery ?
Is this possible?
SQL...Code
and Inline Queries..
(select count(*) 'PrimaryISIN'
from instrument ins,
          instrument_xref insx
where ins.id_inst = insx.id_inst
and     insx.flg_active = 'Y'
and     ins.id_source   ='MF'
and     ins.flg_primary_listing = 'Y'
and     ins.flg_active = 'Y'
and     insx.id_inst_xref = ( select DISTINCT a.id_inst_xref
                                from    instrument_xref a,
                                        instrument_xref b
                                  where b.id_inst_xref ='B0DV8Y9'
                                        and     b.id_inst = a.id_inst
                                     and     b.id_inst_xref_type in ('SE','IS')
                                  and    a.id_inst_xref = 'GB00B03MLX29'
)PISIN2
I am hardcoding the id_inst_xref is the SELF JOIN? Can these be passed dynamically from
the INLINE Query which is invoking the SUB QUERY?

Hi, The hardcoded values entered in the SELF JOIN run fine.
Now,I need to pass values dynamically from the INLINE query.
How do I do that?
Thanks

Picking a value dynamically in OLT

Similar Messages

Maybe you are looking for