Pictures in custom table
Hi,
Can I save pictures in custom table ? If yes, how to do that?
Regards,
Beena
Beena,
I think very well we can save pictures in tables,as SAP has a standard table for the same called STXBITMAPS.May be we can create a ztable of the same structure.
K.Kiran.
Similar Messages
-
SQVI (or SQ01) and how to insert custom table
Hello
I'm trying to create an SoD report in R3 4.6C where I've created around 400 user groups based on HR employee information, the users are now assigned to their new (but still to be verified) user groups in DEV and QAS and I'm now at the stage of trying to link these to a custom table of paired conflicting transactions which have been provided by the business.
I'm using SQVI in QAS instead of SQ01 due to authorisation and time constraints as I just need to see if the report would actually work without bringing the system to its knees. I'm hoping this isn't the case...
I can insert tables and link USOBT to AGR_1251 then to AGR_USERS and then to USGRP_USER but the custom table with tcode A to tcode B isn't available to insert. The aim is to define a single user group as a starting point to run and analyse and gradually increase the number of user groups in the program in background mode to build up a picture of the number of conflicts based on users' object activities. (A poor man's RAR I suppose)
Without ABAP assistance, as there isn't any for several months, is there a way a custom table be made visible to SQVI please?
As always, no points are given regardless but a warm thank you is always given for any comments or assistance whether or not actually stated.
Cheers
DavidHi Sandipan
Also, pool/cluster tables cannot be used in SQVI. It always has to be transparent table if you want to insert it in SQVI.
Thanks Sandipan, it does look like this custom table isn't going to work based on this insight.
Hi Julius
Thanks for that one - a report in SUIM I have never used before!
We don't yet have the RSUSR008_009_NEW report in this version but the transparent table USKRIA from RSUSR009 can be inserted but doesn't result in anything unfortunately - however - running the report from SUIM, it appears to be a list of either SAP delivered or customer defined critical objects which I'm still a bit confused about (as you probably expected) as it is a list of 'ID's - 71 in QAS.
This really does look similar to the client's custom table that has already been generated with 1400+ entries where it might be possible to add the transactions to the 'ID' field with their SU24 values, this would then, hopefully, let me do a join to exclude users who don't have the object, field name and 'from' values in the AGR_1251 entries.
The next step from that (in the original SQVI) was to do a join to find users with both transactionA and transactionB but, maybe, this isn't possible in R3. I'm trying to avoid using Microsoft Access to manipulate tables out of SAP as it's an extra offline process that will only add confusion and probably end up in the Recycle bin once I've left. -
Retriction of access the custom table
Hi Experts,
I created a custom table. Here I have 5users. the first 3 user want to access the custom table in change mode. the remaining 2 users want to see table in diplay mode only.
But here SAP is allow access the table in change mode only to one user. Is it not possible to do this one to multiple users?
Please tell me.
Thanking you.Hi,
Here lock concept comes into picture, as you are saying like 3 users in change mode where if one is editing the records and if another opens then obviously table locks. Check this and ask your Basis guys for the authorizations setting like for 3 users change action and for the another 2 users display action.
Cheers!!
VEnk@ -
Error while deleting a customer table
When I try to delete a customer table which is saved as a local object I get an error stating that the table is still used in ABAP Dictionary. It seems that the customer table is still used in a customer program, but the program is already deleted! I deleted the program earlier and thus no longer exist in our system. I cannot find any trace of the program, but am unable to delete the customer table now. Any suggestions?
Program name would have been of the table maintenance generator and you deleted it manually.
It should have been deleted from TMG .
Your problem will be resolved if you will create Table maintenance of the database table and then delete it again. -
How to find out the user who has created a new field in the custom table.
How to find out the user details who has created a new field in the custom table.
Thanks,
JoanHi Jesudasan ,
You can know the user details with version management.Please find the
below procedure to know.
Go to table->Utilities tab->version->Version management->Compare the previous one .
Hope this solves the issue,Let me know if you have any issues.
Thanks,
Rajani -
How to find the Table from which a Custom table is created.
Hi Gurus,
I have a custom table in SAP and want to figure how that has been created. How can I do that?
Regards
PrashantHello Prashant,
what do you mean by "how"?
When you say custom table do you mean "Customization table" or a "Customer table" (in namespace Z... or Y...)
Anyway, you can access SE11 transaction, view the table and then check its attributes. -
Converting garbled characters for JAPANESE characters in a custom table
Hi all,
I have a custom table that store Japanese characters.
After my company has upgraded to ECC6.0, this data in the custom table has become garbled and its alot of it garbled.
Is there any SAP tool that can I use to make the correction on those garbled Japanese characters?
Thanks,
William WilstrothHi Nils,
I really really really had a field day reading and testing around UC... To my dissappointment, I do not have the authorization to use SUMG and SCP too as well as a few of the TCODES...
I finally told my higher level technical mgnt. that this table might need some changes...
Has this problem of mine got anything to do with MDMP since its no longer supported in ECC6 and I found one coding that search for MDMP in RSVTPROT...
My colleagues suggest that the data be corrected from table DBTABLOG... which i find, in my opinion, is not the right way...
Thanks,
William -
How to Track the changes made to the custom table field value
I want to track the changes made to the custom table field value in table maintenance generator.please help me it is very urgent
Thanks & Regards,
KrantiHi Satya,
These are the steps you've to do.
1. Enable the change document flag in the data element level for the fields of the tables you want to monitor.
2. Go to transaction SCDO. Create a new change object, and add your table to this object. After generation, you'll get a function module.
3. Call this function module in the table maintainence generator screen, after the data is saved to the database table. This function module automaticallly writes the changes, with the old and new values, and the fields that were changed to the tables CDHDR and CDPOS.
4. You can keep track of the changes made to the table by monitoring these tables.
Regards
Anil Madhavan -
Custom Table for Verifying Duplicate Invoice against Legacy Invoice Data
Hi All,
We are trying to upload legacy invoice data in a custom table. Then we want to use SAP duplicate invoice check functionality to look for the potential duplicate invoice from this custom table as well apart from the standard SAP tables.
If you know of some user exit or any function module which I can use to link this custom table with the standard SAP duplicate invoice check functionality then it would be of great help.
Regards,
SanjayHi Jurgan!
Thanks for the reply,
We are using ECC6,
Support pack : SAPKH60013
Settings for Duplicate Invoice Check In Vendor Master is correct
Customization setting OMRDC transaction, tick mark for invoice reference no. only
If all the cited characteristics match, the system displays a
customizable message. M8462 (if logistics invoice documents are found) or M8108 (if accounting documents are found).
I have ensured that message M8108 (if accounting documents are found) is maintained as an error message in OMRM.
Still system is allowing duplicate invoices for the reference nos. 00082 and 00072.
For other reference Nos. which are previously used for other documents, system issues error message successfully.
I dont want to delete archived accounting doc. and if I maintaind BKPF entris of this archived doc manually it will create probelm in FI.
is this happen due to life span of secondory index of archived accounting doc. is completed ?.
Please Help
Many Thanks
Vikas -
How to create a custom table in the below format
Dear Friends
can any one please let me know hot to create a custom table as below
outpatient
|employeeno | class | startdate | enddate | spouse |1stchild | 2nchild| Rate | amount|
My FO wants to enter in the SM30 as above ......i.e he wants to have spouse ,1st child and 2nd child under one group........so he asking me to make as one group
and give a heading as outpatient.........similary i have to give for in patient.
Please could any one tell is it possible.
regards
syamala...Under the SAP forums section, there is ABAP development and in That there is ABAP General.
SAP forums > ABAP development > ABAP General.
Post in that forum.
Regards
AK
Please reward if helpful -
How to create the custom table?
Hi, how to create the custom table and how to integrate the table with defferent R/3?
my requiremnt is i have to create the two tables and those i have to integrate with the existed R/3 and using those R/3 i have to update my custom tables .....can give me some idea?
Tks
DPkhow to create the custom table
There are two approach in creating a table.
1. Bottom-up approach
2. Top-down approach.
Both are valid and you can choose which approach is suitable for you. I always use the bottom-up approach. Here are the steps to create the tables with this approach.
1. SE11 will take you to the DDIC and enter the name of the new table to be created. Let us say Zname. Click create.
2. Enter the short discription of the table and enter the field of the table. If it is primary key and you have to check the box.
3. Enter the data element and double click it, you will be asked to save and will take you to data element discription page. Enter the short discription of the data element and enter the information of domain like the length of field and type of field.
4. If you wanted to use the existing domain then its fine, or else, you have to create one. Enter the domain name in the data element page and double click it. Page will ask to save and jump to domain creation page.
5. In the domain page, you have to save the information which you have already given in the data elements page and check it. Before going to data element page, you have to activate the domain.
6. Go to data element page and save, check and activate.
7. Go to main table page and save, check, and activate.
8. Also, you have to save the technical settings of the table.
The table is now ready for operation. You can use it in your program or you can use it to enter information.
Check table: It is the table which will have all the information about the Foreign keys which are the primary keys in the check table.
It can be created by creating the foreign key from the main table. Click foreign key in the main table and it will take you to a page which will ask for table name and field to which foreign key relation has to be associated. Enter the information and you can create the check table automatically.
SM30 is used for maintenance of the table, that is to realease the errors occured during the creation of the table.
how to integrate the table with defferent R/3
Transport the Table to the another server/client/qas/prd
Kanagaraja L -
How to do a Search help on SAP structure field listing custom table data?
i have a SAP screen (Trans KE52) that they want to have a drop down (search help on).
The drop down should list values from a custom table.
How do you do this?
The values to be displayed are NOT from a structure table but from a transparent table. i believe I will need a search FM to do this but not sure how it is to be done.
Any one have ideas?
Thanks!
ScottHi Scott,
You need to go to SE11 and look for a searh help that match your requirment or build one.
In case you are going to develop one, in the definition tab of the search help look for the selection method and put in the input field the name of your transparent table.
After that you must specify the fields that you need to appear at the list and the one that is going to be selected for your field. This step you have to do it on the search help parameter grid.
Regards,
Eric
PD. Reward points if this was helpful -
Hey Everyone! First post ever, so bear with me:
I'm trying to create a streamlined method to use a form to let myself and others add information and select certain options to put together a custom table of contents. Basically, I would like to have a form with a series of text fill and single/multiple choice options that will automatically populate a table of contents based on the selections and will link to other .pdf files that are associated with the selections. I was hoping this would be possible with a form, but I'm relatively new to the function of the software as a whole and my research came up short. Any suggestions on how to start are more than welcome, and if I wasn't quite clear enough I would be happy to elaborate.
Thanks for your time!You would need to search for other PDF creation software that can accomplish what you desire.
There are many cheaper PDF creation alternatives other than Adobe's Acrobat Pro software.
Also, try doing a web search under these terms to see if you can find an app/software/solution that may work for you.
How to create table of contents in PDF files -
How to enable the DFF in OAF page(where Dff is based on the custom table).
Hi Experts!!
I am in the process of enabling the dff in OAF page. I am not able to enable the dff if am using the Custom table.
Ex:
Assume that my DFF XX_DFF is using the custom table XX_TABLE of att1,att2..
I am able to enable the dff in OAF page but not able to make those values entered to get stored in the custom table.
I need helping hands to help me out to get the entered dff values stored in my custom table.
Kindly provide me the steps so that I can follow up..
Best wishes,
Thiru.Hi,
thiru_apps wrote:
I need to store the captured values of Dff(which was enabled in the seeded page based on the custom table XX_Table) and the same needs to be stored into the custom table xx_Table.
Basically the entered values for the DFF enabled should have to be get stored in the XX_TABLE(Custom TAble).As per my understands in Standard page u want create some extra fields and those should be save in custom table...is it ...
For that u r going create stack layout region in standard page via personalization and extend with custom region.
IF im geting u correctly u need to write code in co and am.
---U had already created the components eo vo AM co...
---For the custom region in Jdev do the mapping of viewInstacne and view attribute properties for the fields.
---In AM:
public void CreateVo(OAPageContext pageContext, OAWebBean webBean)
Row hrow;
OADBTransaction tr=getOADBTransaction();
EOVOImpl vo=getEOVO1();
if(!vo.isPreparedForExecution())
vo. executeQuery();
hrow=vo.createRow();
vo.insertRow(hrow);
hrow.setNewRowState(Row.STATUS_INITIALIZED);
public void savetr()
OADBTransaction tr=getOADBTransaction();
tr.commit();
In Co ProcessREq:
AMImpl AM=(AMImpl)pageContext.getApplicationModule(webBean);
AM.CreateVo(pageContext, webBean);
In Co ProcessFormREq:
---GEt the event of the save button of the standard page
if(pageContext.getParameter("save")!= null)---DI of the standard page
AM.savetr(pageContext, webBean);
Regards
Meher Irk -
How can i create a custom table in to my banking services server
I am having product type and account type details for those things I need to create a table
Product Id. Account Type
DP_PYGO_P 21
DP_BASIC 25
DP_UNLIMIT 24
DP_ADVANTG 17
DP_SAV 34
DP_TBILL 54
DP_USDCHQ 19
DP_FREEDOM 52
For the above fields how can i create a custom table into banking services serverTransaction SE11, maybe? I don't really see the problem, unless you have never created a transparant table before...
Maybe you are looking for
-
those are all of the details.
-
Change duration of still clips
Another naive question from a naive user: is there a straightforward way to adjust clips of jpg images? I'm working on creating a slideshow, and would like a way to manually enter in the duration. I've tried doing that with the "duration" dialog, but
-
Launch of BEx Analyzer via RRMX, other transaction?
Transaction RRMX has been a common means for us to launch the BEx Analyzer in our BW 3.x system. After upgrading to NW04s, transaction RRMX continues to call the 3.x BEx Analyzer. Is there a way to have this call the new NW04s (7.0) BEx Analyzer or
-
Hello, I know color questions have been asked before. But I couldn't find one on tabs. I have a row of tabs at the top of my layout. Can I change the colors according to what tab has been clicked. Or at least apply some sort of effect to the selected
-
Illustrator icons keep changing to a PDF icon?
Anybody know? Why does my illustrator icon keep changing to a PDF icon each time i make a change to a file? The only way I can get it back is to make a change to the title then change it back again. Using illustrator CS3 and the latest adobe acrobat