Planning query donu2019t show current data

Hello,
I have an input ready query over an aggregation level of a real time cube. Whenever the yellow request is closed and a new request is opened, the input ready query does not show the old data. And sometimes it shows incorrect data. We found that the issue is with the Cache.
In RSRT when opening the input ready query in debug mode with "Do not use cache setting", the query returns correct data. But the surprise thing is that, the input ready query has Cache setting as inactive (0) in RSRT. So we had to generate the Delta buffer query <infoprovider>/!!1<infoprovider> in RSRT where <infoprovider> is the name of the real time cube.
This solved our problem and the query brought in correct data. But again when I close the second request, the input ready query again shows me no data or shows me wrong data. So again we need to generate the delta buffer query in RSRT <infoprovider>/!!1<infoprovider>.
This is very annoying when considering the fact that you have to generate the delta buffer query every time the request is closed. This could be a overhead in maintenance and will not go well with people.
Does anybody have any solutions for solving this issue. Is there any setting by which we can turn off cache altogether or delete cache when a request is closed etc? or worst conditions how to automate the generation of delta buffer queries every time the request is closed?
Any help is really appreciated.
Regards,
Anand

please check the below;
Delta buffer query in RSRT for BI-IP ("<infoprovider>/!!1<infoprovider>)
Planning query donu2019t show the current data
Edited by: Hymavathi Yanamadala on Sep 9, 2009 5:47 AM

Similar Messages

Show Current Date in Year Format (and now - 1, etc.)

Our form has some column headers that need to change each year, the headings are current year (2010) + previous 3 years. Am trying to programatically add the titles to eliminate modifying the form just to change the year, but not finding how to accomplish, and was checking out some date samples found, but no success yet. My question is 2 part - how/where do I put code, I don't need the user to enter anything, just want a column header. This example below is where I copied the idea from a sample and tried to adjust, it's on the calculate event of a date/time field, and I get an error message that says 'the display pattern "date-{MM/DD]" is incompatible with the object's data format. Define a compatible Display pattern. This display pattern error is the 2nd part of the question. How do I display only the 4 digit year?
year1.rawValue
= num2date(date(), "YYYY")
How do I accomplish this - am newbie on this! Thank you very much!

A: Show Current Date in Year Format (and now - 1, etc.)

1) I typically use a hidden field to capture the current date on the layout:ready event.
2) If year1 is a date object your script is valid but you are probably missing the display pattern date{YYYY} on year1.
If year1 is a text field you could could capture current year in a hidden field as
// form1.page1.currentYear::ready:layout - (FormCalc, client)
$.rawValue = Num2Date(Date(), "YYYY")
where currentYear has the display pattern date{YYYY} and add
this.rawValue = form1.page1.currentYear.rawValue;
to the calculate event of year1.
Steve

The workbook report no authorization, but related query can show part data

Dear All,
We meet an error, The workbook report no authorization, but related query can show part data.
We have a workbook, it have 1 queries, and when we key in condition to run it, in one field we put on one more condition(Z3XXX = ' WZO' & ' WZA")(User didn't have authorization for this condition), and workbook report no authorization.
Then we checked authorization check log and it show "You do not have sufficient authorization on Z3XXX = ' WCO'.
But when we execute the related query with same condition. the query can open and show WZA's data.
I'd like to know the reason.
thanks & Best Regards,
Kent Yu

Calendar today doesn't show current date, it's now 23rd of Nov 01:03 in Beijing, but Today button of Calendar itself shows "today" as 22nd. So does the Calendar of Yosemite

Calendar "today" doesn't show current date, it's now 23rd of Nov 01:03 in Beijing, but Today button of Calendar itself shows "today" as 22nd. So does the Calendar of Yosemite.
Is it a bug?

Sorry for the huge chunk of code.
Mm, yes, I'm far too lazy to read all that.
But you should be overriding paintComponent(), not paint().
http://www.google.co.uk/search?hl=en&q=java+swing+painting&btnG=Google+Search&meta=
I've not bothered to work out from that pile of magic numbers exactly what you're tring to draw but is it not something that JTable would happily do?

How to show current date in a column of dimension table in ssas

Hi,
I have 2 dimension tables (ALLWORK and YOURWORK) and 1 measure table (STATS). In ALLWORK dim table, I have 4 columns, one of them is END_DATE. Based on END_DATE and current date I want to create a named calculation field. To achieve this, I
want to show the current date in 5th column (of ALLWORK dim table) as calculated member (as named calculation wont show me correct date).
Problem is, I am not able to create the column in the dimension table. While creating the calculated member, I am not able to select the ALLWORK dimension table, it always selects MEASURE by default. Please help.
thanks
Tarique
thanks and regards Tarique Aslam

Hi Tarique,
According to your description, you want to add a column to your dimension to show the current date, right?
In data source view, we can add named calculation to your table. A named calculation is a SQL expression represented as a calculated column. This expression appears and behaves as a column in the table. A named calculation lets you extend the relational
schema of existing tables or views in a data source view without modifying the tables or views in the underlying data source.
Reference
http://msdn.microsoft.com/en-in/library/ms174859.aspx
http://devmau5.wordpress.com/2010/03/25/the-getdate-of-mdx/
If I have anything misunderstand, please point it out.
Regards,
Charlie Liao
TechNet Community Support

ICal still shows previous day in ical proper, but shows current date in the dock

iCal is open in the MONTH, on my desktop permanently, but it continually shows yesterdays date. It isn't till I actually click on the following day in iCal proper that the date changes to the current date. The iCal icon on the dock works fine with no issues. When I first purchased the iMac iCal worked aok. Software is continually updated.

I have the same issue. I am also running iCal 5.0.2 under Lion 10.7.3. It worked fine for me on Lion 10.7.2, and it still works ok for me on my iPhone 4 running iOS 5.1. It does look like a bug to me. I have the issue connecting to a Google Calendar as well as to another (non-Apple) CalDAV server.
Let me know if you call Apple Support to report this issue.

Java code to show current date & time on PDF

Hi,
I have no experience with Java whatsoever and I am hoping somebody out there will be able to help me. Basically we are in the process of uploading all our SOP's to a public share on our Network. Due to regulatory reasons everytime the document is opened it will need to show the current date which will also show when printed. I have adobe 9 pro and see there is a area that you can input Java code so with the power of Java im sure this can be done. Ideally this would be like a watermark across all the page diagonally faded into the background of each page on the PDF.
Only Valid on Date of Printing
Date Printed: <Current Date>
Any help would be much appreciated.

Are you sure you haven't committed one of the cardinal sins of the Java-ignorant by confusing it with Javascript?

Query not showing complete data

Hi,
I faced this issue many times. Original query is not showing complete data but when I create a new query with same rows, columns and filters it gives correct data. Do anybody have any idea what can be the problem?

Below is the checklist :
1. Make sure you have same number of filters/ restrictions in both the queries.
2. Make sure you are not using any authorisation object.
3. Make sure the technical names of the objects you are using in the query are name.
4. Make sure both the queries are on the same multiprovider.
5. Make sure both are of same version.
These are very basic things, I assume you must have done. But these are the only possibilities I could think of.
If this is fine, then as suggested by Raman you can add one object each time in both the queries and test the output. You might get some clue.
Thanks,

ICal showing current date on the dock

I have Leopard and the iCal icon on my dock shows the current date, whether or not the application is open, whether or not I shut down the computer.
Another person in the office, with Panther, has iCal on her dock but the date does not update each day unless she opens the application.
Is there a way to set the dock icon to update in Panther.
thanks,

Is there a way to set the dock icon to update in Panther.
Not without keeping iCal open all the time.
(35881)

Dvt:schedulingGantt : to show current date directly with the week

Hello everyone,
i use Jdeveloper 11g and ADF.
I use this component: "dvt:schedulingGantt" and
Q1: I would like to know if I can show directly when I'm going on this page the current week.
Q2: Is it possible to put on "Start time" field the current date minus one month? and "End time" field the current date plus one year?
Thank you
Regards

Are you sure you haven't committed one of the cardinal sins of the Java-ignorant by confusing it with Javascript?

Showing "current date - 8 hours" automatically

Hi,
For a report, I want to create two dashboard prompts. The second one should show the current date, and the first one should be "current date - 8 hours" automatically. For example;
1. 5/11/2007 3:52:04 AM
2. 5/11/2007 11:52:04 AM
I can create the second one following these steps;
“default to > variable expression” --> “@{system.currentTime}[dd/MM/yyyy hh:mm:ss]”
What about the other? How can I create the first one?
Thanks for your help, br,

as SQL:
select TimestampAdd (SQL_TSI_HOUR, -8, Current_Timestamp(0) ) from SubjectAreaName where TableName.ColumnName = 'some-existing-value'
Note that -- from SubjectAreaName where TableName.ColumnName = 'some-existing-value' -- needs to evaluate to true.

After updating new MIC in QP02 in Back date not showing current date ?

Hi Guru,
I have updated some new MIC and some Changes are made in existing MIC in QP02 on back date. It is showing on same back date with all correction and new MIC but on today's date i.e. current date it is not showing in the system.
any can help me how to get in current date ?
There are some dump error , for these correction i have updated SNOTE 1467234 and 1471534 in Quality server, but no more effect.
Thanks,
Piyush Patel

hi,Premji,
I have updated existing QP in back date i.e. same as when created original date ( expiration date is long i.e. 31.12.9999) , then same thing i wanted to see all updated MIC should be reflect in current date, but it is not coming, so i have updated SNOTE- 1467234 and 1471534 then tried it.It is working fine some how but not as i want.Hence i thing it is solved my problem.
Thanks to you and Mr. Craig for your more suggestion/guidance.
Piyush Patel

Show current date in field? Pages '09

How exactly can I display the current date in a table field in a Pages document.

From Numbers :
menu Help > iWork Formulas and Functions User Guide
You will get a PDF.
For every function, you will find some short samples.
Yvan KOENIG (VALLAURIS, France) mercredi 16 janvier 2011 23:25:53
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

Selection screen must show current date + 1

Hi Guys,
In my selection screen i have given
parameters: date like sy-datum default sy-datum.
I have added + 1 after sy-datum.
But i am not getting tommorows date.
So can I display current date = current day + 1 Day in selection screen itself.
Thanks,
Prasad.

parameters: date like sy-datum default sy-datum.
INITIALIZATION.
DATE = sy-datum + 1. " Tommorows date will be display on the selection screen.
OR:
parameters: date like sy-datum default sy-datum.
AT SELECTION_SCREEN OUTPUT.
DATE = sy-datum + 1.
Regards,
Gurpreet

Showing current Date (Date Column) in the the filter of Interactive Reports

Hi,
I created a filter for the date column in my report (table column name is Process_Date). I have created a filter in the Interactive reports which populates the data from , a particular time perieod. (From_date - To_Date). How can I change the SQL query or the Report settings, so that when the user open a report it should poulate the data for the previous_day or sysdate-1 by default.
Thanks in advance for your help.
James

christine275 wrote:
... (this is a time worked by date and not always entered on the date worked)--
"Time" in Numbers is always "Time of Day", and is always part of a Date and Time value. "Amount of Time" is a Duration value, which may be displayed in a similar format to "Time of Day," but is a different type of value.
If you are entering the number of hours and minutes worked, format the column as Duration, set the units and the format in which you want to have the value appear.
The Date column will still contain a Date and Time value (Jan 1, 2011 00:00:00 in the cell shown in the example), but the "Time Worked" cells will contain only a Duration value.
Incidently, the Date in A2 was entered as "jan 1" (without the quotes). Numbers automatically adds the current year and the default time value, then displays the result in the closest format to what you've entered, or in the Date and Time format you have chosen.
The Duration value in B2 was entered as 3:15 (as displayed). Note that in the entry bar the duration is displayed as 3h 15m, probably to distinguish it from a similarly formatted (Date and) Time value.
Regards,
Barry

Planning query donu2019t show current data

Similar Messages

Maybe you are looking for