Please fill in the missing steps for Adobe TV tutorial episode

Would you be so kind as to give me the steps necessary to reach the status displayed at the onset of the Adobe TV selection called Clean Up Illustrator Live Trace? Thanks.

Thanks.
I want to open a graphic file in Illustrator, then display a Photoshop-linked version of the same graphic file side by side, so that the original is displayed on the right and the linked Photoshop version with the Live Trace already applied is displayed on the left so that when I click Live Trace, the view on the right displays the Live Trace action applied to the original (on the right). Then when I switch to the linked version (displayed on the left in Illustrator) in Photoshop and make changes, then switch back to illustrator, I will get a warning that "Some of the files are missing or modified in the Links panel. Would you like to update them now?", so when I click "Yes", the Live Trace of the Photoshop-linked version displayed on the left in Illustrator will update to reflect its results of the changes that I made in Photoshop, so that I can compare them to the Live Trace that I applied to the original, displayed on the right.
The first view, shown above, displays the original on right, Photoshop-linked, Live Traced version on the left. The following screen shot shows the linked improved version on the left after editing in Photoshop, and the original image on the right after only Live Trace was applied. I'm not trying to figure out how to edit the image in Photoshop to get the desired results (the video explains that), I'm just trying to figure out how to manage the live updating and two-up display of the different image sources in Illustrator. Thanks again.

Similar Messages

  • I cannot download the latest update for Adobe Muse CC. I have been directed  to this formum. I have an erro message "ERROR Adobe Muse CC has encountered an error and will now exit. Please report the last few actions you took leading up to this error to th

    II cannot download the latest update for Adobe Muse CC. I have been directed  to this formum. I have an erro message "ERROR Adobe Muse CC has encountered an error and will now exit. Please report the last few actions you took leading up to this error to the Adobe Muse CC team. Trying to instantiate UID U4691 but lastAllocatedUID is only: 4491 OK"
    I am very frustrated because Muse crashes when cannot download updatres.
    I have been redirected to this forum from the 'Adobe Chat Team'
    I am trying to complete a project for a client, this is the second time I have asked for help. Can anyone please help me I
    I am using Windows 7. I am not sure if a response will come. I am new to forums. Do I wait or will someone contact me?
    Deb Kelleher
    [email protected]

    Hi Deb,
    Please accept my apologies for the inconvenience so far.
    I am not sure if you already tried this, but in case not, try to update Muse via Creative cloud directly.
    Start creative cloud application manager, if you dont have it, you can download it from here,
    Adobe - Adobe Application Manager : For Windows : Adobe Application Manager
    Login using your adobe id, once you are in, switch to Apps, and you should see the Update for Muse, click Update.
    Let me know if you get any error or warning.
    Thanks.

  • I have a question : Someone want sell me Creative Suite 6 MAster Collection, He is gave me the key and want me to fill in the transfer document from adobe? If I accept and pay him for this do I be eligble to use this software in company ? He is offering m

    I have a question : Someone want sell me Creative Suite 6 MAster Collection, He is gave me the key and want me to fill in the transfer document from adobe? If I accept and pay him for this do I be eligble to use this software in company ? He is offering me full version of the product. How Can I check it ?

    There is no reason to do that. You can buy a legitimate copy of the product from Adobe.
    If the price is too good to be true, it's too good to be true. Caveat emptor.

  • What are the basic steps for creating a content repository?

    I am trying to create a document store on a file system (fsdb) that will hold files that are ftp's to that location. Is this possible using KM? If so, what are the basic steps for creating a file system repository and using it through KM? I have found stuff on help.sap.com but that only tells you what each component does not what actual steps need to be taken to setup KM, such as user rights , creating an entry point, so that all of KM is not visible, etc...
    If anyone knows of any guides that show a step by step process that would be great too.
    Thanks
    Paul

    Hi Paul
    First of all you need to create a new repository
    Suppose you want to add all the documents under folder Paul under C: Drive
    (Even you can put whole documents of C: drive into Paul)
    Navigate to System Admin -> System Configuration -> Knowledge management -> Content Management -> Repository Manager -> File System Repository
    There you can create a new directory by clicking on button New
    Give the parameters as follows :-
    Name               :           Anything you like
    Description       :           Anything you want
    Prefix (must start with /)  :  Probably same as your repository name like \Paul
    Lookup mode : caseless
    Root Directory   :  C:\Paul
    NOTE:  This is the trick. You need to give the proper path means folder path which you want use as repository)
    Repository Services  :  Any services you want
    Property Search : Managercom.sapportals.wcm.repository.manager.generic.search.SimplePropertySearchManager
    Security Manager         :           AclSecurityManager
    ACL Manager Cache   :           ca_cm_rep_acl
    The save it
    Now see whether the same repository is coming under KM Content or not, if not may be after restart it will come.
    I think the above information will help you. If still you have problem, please feel free to contect me.
    Regards,
    Chamkaur

  • Why do I get an error message when I try installing the free trial for Adobe Illustrator

    I'm trying to install the free trial for Adobe Illustrator and keep getting this message:
    The address wasn't understood
    Firefox doesn't know how to open this address, because one of the following protocols (aam) isn't associated with any program or is not allowed in this context.
    You might need to install other software to open this address.
    Here's the url that shows up: aam://SAPCode=ILST?productVersion=18.0?passPhrase=YEmZQLlnqXSNN5J2MqT9nFJmjj9BuWZk+pf7OGV MZS6yZ0pJp1zX0dpiQotYMQvVL6Igm6fKG2AiVpcf4Qew9n8aUjJqM9Fz3NIDLs6XLj+jHTpWWAnsvHIxj7tGQUTyO j+4tUvNODu+kvpcXLAgtimRoEthDJXSnwKugdfBADY=
    Please help!!!

    Hola, espero hablen Español.
    Tengo el mismo problema, solo que no puedo instalar el Adobe Creative Cloud, y al intentar hacerlo me sale el mismo codigo:
    aam:?? // SAPCode = ILST ProductVersion = 18,0 frase de contraseña = YEmZQLlnqXSNN5J2MqT9nFJmjj9BuWZk + pf7OGV MZS6yZ0pJp1zX0dpiQotYMQvVL6Igm6fKG2AiVpcf4Qew9n8aUjJqM9Fz3NIDLs6XLj + jHTpWWAnsvHIxj7tGQUTyO j + + 4tUvNODu kvpcXLAgtimRoEthDJXSnwKugdfBADY =
    No puedo instalar ningun programa en modo de Prueba porque no me deja instalar el Creative Cloud.
    Ya intente con todos los navegadores diferentes a Safari. No funciona Chroome, No funciona Explorer, No funciona Mozilla Firefox
    Ya puse Restaurar Safari y Vaciar Cache pero tampoco a funcionado.
    Estoy realmente desesperada. Please Help Me

  • Where can I find the download link for Adobe Acrobat Installer DC? We bought the product as a program and not as a subscription. Thanks'

    Where can I find the download link for Adobe Acrobat Installer DC? We bought the product as a program and not as a subscription. Thanks'

    I forgot to get back to you. Thank you very much for your prompt reply.
    Your suggestion helped!
    Pamela Oettel
    *Oh by the way, referrals to your friends are the heart of my business! If
    you know of someone who is buying or selling a home, please give me a call.*
    cell: 510-703-8636
    [email protected] <[email protected]>
    Hablo espanol tambien
    *Check out my Latest Facebook Post
    <https://www.facebook.com/pameastbayrealtor>*
    *Check out *What They Say About Me
    <http://www.zillow.com/profile/Pamela-Oettel/Reviews/?my=y>
    *BHG Mason McDuffie *
    2095 Rose Street, Suite 100, Berkeley, CA 94709
    BRE Lic No. 01761212
    On Tue, May 27, 2014 at 2:29 AM, GautamBahl <[email protected]>

  • How to use the Validate step for Approve step

    Hi Experts,
       I have modeled a workflow with the steps start,process, validate, approve, process and stop.
    Process is set to owner and approve is set to some other user user1.
       My requirement is as follows :
    1) Approve the records by approver and then it should send it to the next step for further processing
    1.1)  if the approver did not approve the record it should send a error message until the record is approved. So it should not send it to the next step when record is not approved
    I am using a field called item status for approving and disapproving the records. My validation is based on this field only... Validation working fine when i tested it manually.
    But my issue is when am using this validate step in workflow design validation is getting triggered for all the users.as per my requirement only approver should get the error message.But in my scenario owner is getting the error message and approver is not getting any message.
    How can i use the validate step only for particular step say approve in workflow.
    Can anyone please help me out how should use validate step only for approve step...
    Thanks & Regards
    Sireesha.
    Edited by: sireesha esukapalli on Jun 17, 2008 2:48 PM

    Hi ,
      I have set the validation property to "None".
      My design is as follows :
    start->process->validate->approve->stop.
      Owner is assigned to process step and approver is assigned to approve step.
    Now my problem is owner is also getting this error message along with the approver. AS per the design both process, approve users are getting the error message.
    As per my requirement only approver should get this prompt but not the owner.
    How can i restrict only for specifc user to get this message.
    Can anybody please advice how can restrict the owner to not get this error message...
    Thanks & Regards
    Sireesha.
    Edited by: sireesha esukapalli on Jun 24, 2008 2:18 PM

  • Why is the support service for Adobe CC so bad?

    ...after more than 2 hours on the phone, giving up on a reply from web chat and seeing no response to my question on these discussions...I am asking why is the support service for Adobe CC so bad?

    Hi Sean,
    I am sincerely sorry to hear you are having trouble with our customer support.
    Please, allow me to get in touch with you by email.
    Thank you.
    Arnaud.

  • I have my redemption code but can't get the serial number for adobe photoshop elements 12 that I jus

    I'm trying to find out my serial number.  I have the redemption code but can't get the serial number for adobe photoshop elements 12 that I just purchased

    Hi KEsheppard
    Please refer the link below to get the help regarding redemption code and the serial number:
    http://helpx.adobe.com/x-productkb/global/redemption-code-help.html
    Let us know if it helps,
    Thanks!
    Gurleen Kaur

  • What are the config steps for contract hierarchies and vendor hierarchies?

    Hi friends
    what are the config steps for contract hierarchies and vendor hierarchies?
    Regards
    Raj Kumar

    Contract hierarchies
    A function that enables users authorized to create a purchasing contract to define relationships between super- and subordinate contracts.
    A contract hierarchy consists of one or multiple contracts and is subject to the following rules:
    The top node of the hierarchy cannot have a superordinate contract
    Every contract except for the top node has exactly one superordinate contract
    Every contract can have none, one, or multiple subordinate contract(s)
    A contract can be part of no hierarchy or exactly one hierarchy
    Note:Contract hierarchies are only available for purchasing contracts. They are not available for global outline agreements.
    You can activate this from SRM Server> Cross application settings>Activate Hierarchies for Product Categories, Vendors, and Contracts.
    Note:
    These hierarchy functions should not be reset once they have been activated.
    Similiarly you can do this for Vendor Hirerachies.
    Please visit link for more details: http://help.sap.com/saphelp_srm50/helpdata/en/43/2022b83fbc2be8e10000000a11466f/content.htm
    Thanks

  • Where is the download link for adobe 9 standard

    where is the download link for adobe 9 standard?@

    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • What are the system requirements for Adobe Content viewer?

    What are the system requirements for Adobe content viewer?

    Hi j80r59m,
    Please check the KB : http://helpx.adobe.com/digital-publishing-suite/help/create-custom-viewer-app-ipad.html

  • What would the pricing be for adobe web hosting for me; I all ready have CS3 creative suite, an existing plan for the new Photoshop and Lightroom 5. But I need also to use Muse?

    What would the pricing be for adobe web hosting for me; I all ready have CS3 creative suite, an existing plan for the new Photoshop and Lightroom 5. But I need also to use Muse?

    Hello Fpless,
    For more information regarding your request, I would advise you to please get in touch with our Sales Team by phone.
    Phone number: 802 06016 (dial from Denmark)
    Thank you.
    Arnaud.

  • What are the different steps for  costing related to repetitive manufacturi

    Hi PP guys
    can any one explain the different steps for costing in repetitive scenario as compared to discrete scenario what is the major difference
    thanks
    shaik

    Dear Michel,
    !.In REM scenario Product cost collector is required for all the products for which production booking is
    to be done.
    2.For each production version created a product cost collector will be created in KKF6N.
    3.Without a product cost collector production confirmation can not be done in MFBF.
    4.Product cost collector is the cost object in REM scenario.
    5.Once after creating material master,BOM,work center,rate routing,aproduction version the next steps
    is creating product cost collector.
    6.While creating the PCC,the system creates a preliminary cost estimate nothing bu the sum up of the
    BOM and dare routing cost.
    7.Either a prelimnary cost or a standard cost estimate can be used for doing the production
    confirmation in MFBF as per the REM profile assigned.
    8.Standard cost estimate can be done in CK40N and this costs gets updated in the material master.
    9.For every production confirmation made in MFBF the costs gets accumulated in the respective PCC.
    10.the variances can be settled periodically as per the business requirement.
    Regards
    Mangalraj.S

  • Open pdf says "please fill out the following form" when I attempt to apply redactions, I get an error message.  How do I "turn off" the form portion of the document?  I assume that is the problem since I have not had this issue with any of the other files

    I am attempting to redact a large pdf file.  When I open the file, it has a bar across the top with the message "please fill out the following form".  I can mark redactions, but when I attempt to apply them I get a message saying, "In order to proceed Digital Signatures must be removed and the document must be fully authorized.  Do you want to make these changes and continue?"   I click "ok".  Then I get a message saying, "an internal error occurred."  How do I get around this problem?

    You cannot redact a signed document. This is because one of the things signatures guarantee is access to the OLDER document (i.e. there will be an unredacted copy in there).
    In general you cannot remove signatures, but sometimes you can. Look under the Signatures tab (right click on left vertical bar if there isn't one) to see if it is removable.

Maybe you are looking for