Please help! ipmp group 1 failed

I have some problems, on server 2 my V890HA server,that
" osssvr-2 in.mpathd[101]: All Interfaces in group ipmp1 have failed"
can somebody hep me,why it happen? i already define etc/hosts, etc/inet/ipnodes, etc/netmasks, etc/defaultrouter and for server 1 is already success, and i can ping, telnet from another server, but server 2 is failed
root@osssvr-2 # more /etc/hosts
# Internet host table
127.0.0.1 localhost
10.177.82.19 osssvr-1
10.177.82.20 osssvr-2 loghost osssvr-2.net
10.177.82.17 osssvr
10.177.82.22 osssvr-1-rsc
10.177.82.23 osssvr-2-rsc
10.177.82.18 3320-1
10.177.82.21 3320-2
10.177.82.24 osssvr-1-ipmp1
10.177.82.25 osssvr-1-ipmp2
10.177.82.26 osssvr-2-ipmp1
10.177.82.27 osssvr-2-ipmp2
#console
10.177.82.29 ossconsole
root@osssvr-2 # more /etc/netmasks
# The netmasks file associates Internet Protocol (IP) address
# masks with IP network numbers.
# network-number netmask
# The term network-number refers to a number obtained from the Internet Network
# Information Center.
# Both the network-number and the netmasks are specified in
# "decimal dot" notation, e.g:
# 128.32.0.0 255.255.255.0
10.177.82.0 255.255.255.240
root@osssvr-2 # more /etc/inet/ipnodes
# Internet host table
127.0.0.1 localhost
10.177.82.19 osssvr-1
10.177.82.20 osssvr-2 loghost
10.177.82.17 osssvr
10.177.82.22 osssvr-1-rsc
10.177.82.23 osssvr-2-rsc
10.177.82.18 3320-1
10.177.82.21 3320-2
10.177.82.24 osssvr-1-ipmp1
10.177.82.25 osssvr-1-ipmp2
10.177.82.26 osssvr-2-ipmp1
10.177.82.27 osssvr-2-ipmp2
root@osssvr-2 # more /etc/defaultrouter
10.177.82.30
root@osssvr-2 # more /etc/hosts
# Internet host table
127.0.0.1 localhost
10.177.82.19 osssvr-1
10.177.82.20 osssvr-2 loghost osssvr-2.net
10.177.82.17 osssvr
10.177.82.22 osssvr-1-rsc
10.177.82.23 osssvr-2-rsc
10.177.82.18 3320-1
10.177.82.21 3320-2
10.177.82.24 osssvr-1-ipmp1
10.177.82.25 osssvr-1-ipmp2
10.177.82.26 osssvr-2-ipmp1
10.177.82.27 osssvr-2-ipmp2
#console
10.177.82.29 ossconsole
root@osssvr-2 # more /etc/netmasks
# The netmasks file associates Internet Protocol (IP) address
# masks with IP network numbers.
# network-number netmask
# The term network-number refers to a number obtained from the Internet Network
# Information Center.
# Both the network-number and the netmasks are specified in
# "decimal dot" notation, e.g:
# 128.32.0.0 255.255.255.0
10.177.82.0 255.255.255.240
root@osssvr-2 # more /etc/inet/ipnodes
# Internet host table
127.0.0.1 localhost
10.177.82.19 osssvr-1
10.177.82.20 osssvr-2 loghost
10.177.82.17 osssvr
10.177.82.22 osssvr-1-rsc
10.177.82.23 osssvr-2-rsc
10.177.82.18 3320-1
10.177.82.21 3320-2
10.177.82.24 osssvr-1-ipmp1
10.177.82.25 osssvr-1-ipmp2
10.177.82.26 osssvr-2-ipmp1
10.177.82.27 osssvr-2-ipmp2
root@osssvr-2 # more /etc/defaultrouter
10.177.82.30

Actually the ipmp it's already ok before (using the old IP). I just make changes to ip address and the gateway, because this system have a new environment...
do you now what parameter that i must change, when configuring new IP?
/etc/hosts
/etc/inet/ipnodes
/etc/defaultrouter
the changes that i made for server 1 alredy sucess, but for server 2, i don't why it failed...
- IPMP Groups --
Node Name Group Status Adapter Status
IPMP Group: osssvr-1 ipmp0 Online ce2 Online
IPMP Group: osssvr-1 ipmp0 Online ce0 Offline
IPMP Group: osssvr-2 ipmp1 Offline ce2 Offline
IPMP Group: osssvr-2 ipmp1 Offline ce0 Offline
root@osssvr-2 # ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
ce0: flags=11000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,FAILED> mtu 1500 index 2
inet 10.177.82.20 netmask fffffff0 broadcast 10.177.82.31
groupname ipmp1
ether 0:14:4f:66:c9:8b
ce0:1: flags=19040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,NOFAILOVER,FAILED> mtu 1500 index 2
inet 10.177.82.26 netmask fffffff0 broadcast 10.177.82.31
ce1: flags=1008843<UP,BROADCAST,RUNNING,MULTICAST,PRIVATE,IPv4> mtu 1500 index 5
inet 172.16.0.130 netmask ffffff80 broadcast 172.16.0.255
ether 0:14:4f:66:c9:8c
ce2: flags=19040803<UP,BROADCAST,MULTICAST,DEPRECATED,IPv4,NOFAILOVER,FAILED> mtu 1500 index 3
inet 10.177.82.27 netmask fffffff0 broadcast 10.177.82.31
groupname ipmp1
ether 0:14:4f:66:c9:64
ce3: flags=1008843<UP,BROADCAST,RUNNING,MULTICAST,PRIVATE,IPv4> mtu 1500 index 4
inet 172.16.1.2 netmask ffffff80 broadcast 172.16.1.127
ether 0:14:4f:66:c9:65
clprivnet0: flags=1009843<UP,BROADCAST,RUNNING,MULTICAST,MULTI_BCAST,PRIVATE,IPv4> mtu 1500 index 6
inet 172.16.193.2 netmask ffffff00 broadcast 172.16.193.255
ether 0:0:0:0:0:2
root@osssvr-2 #

Similar Messages

Please help! apple Russia fails in warranty repairs due to the lack of IMEI numbers IPAD in the invoice. Where to go?

Please help! apple Russia fails in warranty repairs due to the lack of IMEI numbers IPAD in the invoice. Where to go?

Call Apple and they will send you a box to ship it in for service. Should take less than a week to get it back. Mine was picked up on a monday, and I got ti back on a thursday.
-Bmer
Mac Owners Support Group
Join Us @ MacOSG.com
iTunes: MacOSG Podcast
 An Apple User Group 

Please Help. Photoshop installation failed half way through

Initially I had downloaded the photoshop CC2014 trial once, I paid I wanted the CC version because I need the oil paint function which was taken out on the CC2014 version, so what I did is uninstall the CC2014 which was installed and working and proceeded to install the CC version but midway through installation it kept failing and telling me to restart my computer, I have done that at least half a dozen times, plus I've also tried the following:
> I uninstalled every adobe app I had including CC
> I have used the Adobe Creative Cloud Cleaner tool app
> Have restarted my computer so many times I lost count and I still get the same error, half way through the installation process
> And now the same thing is happening when I try to reinstall illustrator, this is a nightmare!
BTW I'm not running any other software while doing this and have turned off the fire walls
I'm on an Imac OS X version 10.9.5
Please help I've spent so manny hours trying to solve this, it's driving me crazy and need to complete some work in photoshop I have deadline.
Latest log report: 10/11/14 19:54:40:043 | [ERROR] | | OOBE | DE | | | | 128135 | ASU has quit unexpectedly.
they all say the same

Tat7 I would recommend reviewing your installation log files for actionable error messages. You can find details on how to locate and interpret your installation logs at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html. You are welcome to post any additional errors you locate to this discussion.

Please Help...Installer Failed To Initialize

I am a member of Creative Cloud and have been working ALL day to download Premiere Pro CS6 because I need to work on a project. I keep running into errors on Adobe Installation Manager, "Installation Failed. Download is corrupt", and I have been now running into "Installer won't initialize" when I use the Adobe Download Assistant instead to get the program downloaded.
I am not finding an Adobe Installer program in my applications. Maybe it was mistakenly deleted? But I cannot find anywhere on Adobe to get this Installer program so that it will initialize and I can get Premiere going on my computer.
Please help. I am going to lose all my hair at this point. I've used Adobe products for quite awhile and have NEVER had this issue.
Thanks.

Tried again this morning but first I downloaded Photoshop to see if that would work but it prompted me to update my Adobe Application Manager. I did and the program installed with no issue. So did AfterEffects. I attempted to install Premiere Pro again and this time, after running the .dmg file, it installed.
No idea why this suddenly resolved unless it was an issue with Application Manager. Problem is, I only found a way to update that program by the roundabout method of trying to install another program. Baffling but at least I can use Premiere now.
Not sure if this will help anyone else but this was frustrating.

Please help me ( restore DB fail) urgent..

i'm trying to restore the database but its giving some error please help me out i'm a beginner
here's the error
TITLE: Microsoft SQL Server Management Studio
Restore failed for Server 'HP-PC\SQLEXPRESS'. (Microsoft.SqlServer.SmoExtended)
ADDITIONAL INFORMATION:
System.Data.SqlClient.SqlError: The operating system returned the error '5(Access is denied.)' while attempting 'RestoreContainer::ValidateTargetForCreation' on 'C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\ResturantManagementDB.mdf'.
(Microsoft.SqlServer.Smo)
BUTTONS:
OK

the database file is being created on the path C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\
make sure your sql server service account has permission to create/write/read files on that location.
to know your sql server service account -- go to run-- type in configuration manager ---sql server ---you should see the service account.
alternatively, you can create the file on a different location where your sql service account has permission to read/write the files..
Hope it Helps!!

Please Help me ...Fail Safe Server installation..

We have 2 sever Clustered, on windows 2003 Enterprise and we want to install Oracle 10g database and install & configer the Fail Safe Server, could you please help me by providing the docmantation for best installation of the 10g database and Fail Safe Server.
Regards.

As usual you find the documention right here on OTN:
http://www.oracle.com/technology/documentation/failsafe.html
Werner

Please Help!! Computer Failing!!Can you slect updates individually?

I think the last update is messing up my mac. I would like to re-instal and be able to update to 10.4.10. I bought the computer with 10.4.2. When I re-installed after it was crashing for no reason it automatically updated to 10.4.11. I started to have the same problem again although less frequently.
The problem is the computer will just turn off. I power back up with no problem. Sometimes it will shut down as soon as I power back and sometime it will run for 10 minutes to several hours before shutting down. When I power up sometimes the fans goes ful power for a second and stops and sometimes no fan so I do not think it isa logic board problem. I have run multiple hardware tests from safe mode, command line and apple recovery disc and everything passes.
I really think it is the last update. If there was a way I could re-install and selectively install the updates then I could see if the update is the issue. Right after install at 10.4.2 it was working great.
I would also like to know if there is a way to overwright and delete the HD before re-installing. On my Toshiba laptop there is an option to completely overight and delete the HD. It takes several hours but I did this and re-installed Vista and it really made a big difference i how the OS performs.
Any help would really be great. I want to fix this issue myself. I gave my wife my precious iBook G4 and bought a cheap Toshiba until we have the money to buy a MacBook but to have the iBook dead in less than a year and a half is really making me upset. I can expect this with cheap windows hardware but not premium mac. Also with my toshiba I can replace any parts pretty easy myself.
I just can't afford to replace or even repair (new logic board or HD) this iBook since I can't just buy the parts and do it myself without risking completely destroying the mac. My wifes old mac still works but Apple has not updated it in a while and a lot of stuff is not compatible.
Please HelP!!
R

robzilla:
is there any way to install the OSX PPC updates individually instead of all together.
The Combo update does not cause crashes unless you have issues with your computer. I have installed Combo updates all along the line on several computers and have never had an issue. Issues may be occasioned by other problems with the computer, and if they recur and/or persist we should look at them in turn.
Combo updates have the advantage of having updates integrated into one update, so that you are less likely to have conflicts and are often used to solve issues that arise from installing individual updates.
Here is a link for Mac OS X 10.4.10 Combo update (PPC).
Again, if issues arise and recur, please post back and we will try to address them individually.
Cheers
cornelius

Please Help with group chat probs

I don't get any sound or vibe notification for my group chats also In my group chats if a pic is posted and then comments made on that pic I can't scroll up or down to see all comments. This is something I need to fix as we use pic with chats at work. I can't get the info I need. If any one could help with this problem please do. This problem has only been since I upgraded to the newest bbm messenger last week. I have the Q10. I pulled the battery and sims card but this did nothing to fix the problem. Please if anyone can help!
Thank you all

Please make sure you are using TRUCN() in your GROUP BY expression. This function will truncate the date by removing time content.
Best of luck!

Please Help! PrE 4 "failed to return a video frame" on my project!

Big project, I finally pulled everything all together and on the render to H.264, I get "Adobe Premiere Elements (4) failed to return a video frame."
I really had hoped to get this in today (it's a video pitch for my dream opportunity). Any help you guys/gals can lend would be greatly appreciated!

Bill, thank you! Your article did help, and I was able to get the video to completely render. I essentially used a "Title" track, stripped down of its text/shapes to fill in all the gaps. Seems to have done the trick on that issue.
Unfortunately, I must have done something wrong, because the audio and the video are now terribly out of sync. The odd thing is, it seems to be matched sometimes, but then the video of me talking appears to speed up or slow down - the audio does not sound distorted but the video appears to be changing speeds. It's kind of throwing off my "Oh maybe I added too long of a gap Title frame and skewed the audio" theory.
I was dreading this moment. The moment when all is done and I can't export cleanly! Perhaps I should pose the audio sync problem as a separate question, because this is a fairly detailed project (lots of images/video popping up) and I fear that I'm having some sort of conversion or codec issue now
Any ideas? Thanks a million Bill, and everybody else!

Please Help: Error! Connection failed to MaxDB (Linux)

Hello,
our current situation is, that we copied manually (after a system crash) all files under /sapdb from an old backup into the our (empty) Live system. Only the database files under sapdb/KRT/sapdata comes from the chrashed SAP system. These files are not lost.
If we start the Sap System following messages appears:
Checking ADA db Database
ABAP Database is not available via R3trans
Starting SAP-Collector Daemon
09:04:34 27.04.2010   LOG: Effective User Id is root
This is Saposcol Version COLL 20.95 700 - v2.12, AMD/Intel x86_64 with Linux, 2008/01/02
Usage: saposcol -l: Start OS Collector
        saposcol -k: Stop OS Collector
        saposcol -d: OS Collector Dialog Mode
        saposcol -s: OS Collector Status
The OS Collector (PID 5469) is already running .....
saposcol already running
Running /usr/sap/EC6/SYS/exe/run/startdb
Trying to start database ...
Log file: /home/ec6adm/startdb.log
Database start failed
DB startup failed
Our system administrator is ill and i'm not a system administrator.
Could you help me ?
Thank's lot
Franz

Some additional informations:
/home/ec6adm/startdb.log:
Di Apr 27 09:04:34 CEST 2010
LOGFILE FOR STARTING DATABASE
Trying to start database ...
Di Apr 27 09:04:34 CEST 2010
Checking required environment variables
SAPSYSTEMNAME is >EC6<
Start database with xuserkey >c<
Di Apr 27 09:04:34 CEST 2010
Connect to the database to check the database state
dbmcli: connect check finished with return code: 0
Database not available
Di Apr 27 09:04:34 CEST 2010
Starting XServer
    12916 XSERVER Found other running x_server with version 'X64/LIX86 7.6.03   Build 009-123-163-622'
    12902 XSERVER started, 'already...'
Di Apr 27 09:04:34 CEST 2010
Starting database
Starting Database Instance...
Error! Connection failed to node kurt for database KRT:
database not found
Opening Database...
Error! Connection failed to node kurt for database KRT:
database not found
Di Apr 27 09:04:34 CEST 2010
Connect to the database to verify the database is now open
dbmcli check finished with return code: 0
Database start failed

Please help with username retrieval failed error

Not sure if this is the appropriate forum for this
We work in a managed environment. In the past week the domain has changed from Manitoba to ME. Yesterday I tried to connect to my local personal Oracle database 9iv2 with SQL*Plus and got an ORA-(TNS)-12631 USERNAME RETRIEVAL FAILED error. However I can connect with iSQL and Oracle Forms. Go figure? Everything was working well on Friday. Our systems person cannot find anything in the logs to indicate other changes that might have been made to our environment.
I've changed all occurrences of manitoba to me in the c:\oracle\ora92\network\admin\tnsnames.ora, listner.ora and snmp_rw.ora files as well as any others of the same name in other directories (just in case).
This has not solved the problem. Can anyone suggest what else might need fixing/editing???? Registry??
I activated the logs and traces but don't understand them well enought to find clues to the problem.
At the same time, we also experienced problems with our oracle servers, but they are now back on line. I was told that the listners stopped working.
I still cannot connect to my personal oracle, so any help/suggestions would be very much appreciated
Thank you
glenn

problem has been solved by changing
sqlnet.authentication_services=(NTS)
to
sqlnet.authentication_services=(none)
BUT: I still don't know why our two servers and my personal oracle got derailed all on the same weekend. I'd still appreciate some suggestions.
glenn

Please help with "Group By"

Greetings to all that read this. Maybe someone will know how to do this. I have a block that is populated by a query that selects the number of phone calls made by the hour, then sums those calls by the day. I would like to know how to group them by the day when displaying more than one day. My block items (in tabular format) displays the total number of calls but does not group the data by the day. I cannot seem to find the functionality to group the calls by the day. I use the where clause for the block to limit the data to specific days and then the order by clause for the block to order them by day. But how do I sum the total for each day and display each day? Thank you all for any direction.

Please make sure you are using TRUCN() in your GROUP BY expression. This function will truncate the date by removing time content.
Best of luck!

PLEASE HELP Lightroom 5 assertion failed.

I followed the below fix and still get assertion failed
Open Windows Explorer.
Go to C:\Users\[your user name]\.
Check for the folder named Pictures.
If you don't see the folder, create a folder named Pictures under folder C:\Users\[your user name]\.
Restart Lightroom. If the error recurs, restart your computer, then retry. If the error recurs, continue to the next step.
Click the Windows Start button.
Type "regedit" in the Search program and files field, and press the Enter key.
Back up your registry by choosing File > Export. Give the backup copy of the registry a name and location you can remember.
Navigate to the registry key: [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer \User Shell Folders]
Look at the value for the My Pictures entry. The Windows default is: %USERPROFILE%\Pictures, which is the Pictures folder under C:\Users\[your user name]. If another folder is listed, check Windows Explorer for that folder. If it does not exist, you have two options. (1) Create the folder with that name in the location indicated in the registry entry. (2) If the Pictures folder exists under your user name folder, double-click the My Pictures entry, and reset the value to: %USERPROFILE%\Pictures
Quit the registry editor.
Log off from your account and back on, or restart your computer, then restart Lightroom 5.4.

The locations for preference files are usually hidden at the OS level by default.
If you tell us which OS and version, you are using we can probably give specific advice. Barring that read here: http://www.lightroomforums.net/showthread.php?14226-Resetting-(or-Trashing-)-the-Lightroom -Preferences-file

Please help: getInputStream() on URLConnection fails intermittently

I am encountering IOException while getting InputStream using getInputStream() method on URLConnection. Error pasted below.
XML Regular I/O Exception - while getting the input stream from http://10.20.30.40:-1/myApp/servlet/com.myComp.xml.CollectorServlet | original message -> 2006-03-04 22:20:05.54 java.io.IOException: Server returned HTTP response code: 500 for URL: http://10.20.30.40:-1/myApp/servlet/com.myComp.xml.CollectorServlet
My client code connects to the server at regular intervals (say, 10 mins). The Exception occurs intermittently for 3 to 4 intervals and recovers. But the problem occurs again after two three intervals.
The server is Apache-Tomcat. The problem does not occur in the initial stages but occurs after continuous operation of Tomcat server for one month or so. But the problem is persistant then on.
Please find the code below.
url = new URL("http://10.20.30.40:-1/myApp/servlet/com.myComp.xml.CollectorServlet");
     URLConnection httpConnection = null;
     try
httpConnection = url.openConnection();
catch (IOException e)
          System.err.println("IO Exception");
     httpConnection.setDoOutput(true);
httpConnection.setDoInput(true);
httpConnection.setUseCaches(false);
httpConnection.setRequestProperty("Content-Type", "text/xml;charset=UTF-8");
httpConnection.setRequestProperty("Authorization", authString);
     try
outStream = httpConnection.getOutputStream();
catch (IOException e)
System.err.println("IO Exception");
outStream.write(......);
     outStream.flush();
     outStream.close();
     try
inStream = httpConnection.getInputStream();
catch (IOException e)
String sMessage = "XML Regular I/O Exception - while getting the input stream from " +
url.toString() + " | original message -> " + ExceptionToString.createMessage(e); // e.getMessage ();
throw new XMLExceptionIO(sMessage);
Regards,
Giridhar.

Hi all,
Can anyone give solution for the exception mentioned by giridhar, I am also facing the same problem. I am tyring to call a servlet from my java program and pass a file to the servlet, the servlet calls some file upload program and then returns some details related to file and upload proces back to my java program.
regards
Meena

MOVED: Please Help ASAP Bios Flash failed!!! Msi neof cannot recover with disk!!!

This topic has been moved to BIOS.
https://forum-en.msi.com/index.php?topic=115701.0

I had a very similar experience. Here is how I fixed it.
Download sp41954.exe from here or search for it.
Double-click on the file to launch the application. If you are running Vista or higher, close the program, go to where it extracted (C:\swsetup\sp41954) and find the file FirmwareUpdater.exe. Right-click on the file and select properties. Click the Compatibility tab and select "Run this program in compatibility mode for: Windows XP (Service Pack 3)". Launch FirmwareUpdater.exe and create a bootable diskette. If you are running XP, you can create the bootable diskette from the sp41954 directly.
Power off the laptop. Connect the USB Floppy drive with the newly created diskette to the laptop. Hold down all four arrow keys while turning on the laptop. Continue to hold down the four arrow keys until you see either the num-lock or cap-lock key flashing ( don't remember which). It should be reading from the diskette. After a minute or so, the laptop should reboot and operate normally.
When I did this, I disconnected everything from the laptop and removed the battery. I do not know if it was necessary to remove everything or not.
Hope this helps.

Please help! ipmp group 1 failed

Similar Messages

Maybe you are looking for