Please HELP with Creative Vision:M 30
I lost my cd with creative media explorer and the drivers for my vision m 30 GB. The creative support site doesn't have the media explorer only update.
Where i can download this software?Message Edited by mazaika on 0-2-200804:34 AM
Go to anythingbutipod.com/forums or epizenter.com, you will find what you are looking for.
Similar Messages
-
I switched over from an iPhone to a Samsung Galaxy S3 & I haven't been able to receive any text messages from iPhones. I have no problem sending the text messages but I'm not receivng any from iPhones at all. It has been about a week now that I'm having this problem. I've already tried fixing it myself and I also went into the sprint store, they tried everything as well. My last option was to contact Apple directly. Please help with turning my iMessage completely off so that I can receive my texts.
If you registered your iPhone with Apple using a support profile, try going to https://supportprofile.apple.com/MySupportProfile.do and unregistering it. Also, try changing the password associated with the Apple ID that you were using for iMessage.
-
How can I sync my iPhone on a different computer without erasing my applications? My iPhone was earlier synced with a PC which I don't use anymore.
On the new computer, I am getting a message that my all purchases would be deleted if I sync it with new iTunes library.
Please help with proper steps, if any.Also see... these 2 Links...
Recovering your iTunes library from your iPod or iOS device
https://discussions.apple.com/docs/DOC-3991
Syncing to a New Computer...
https://discussions.apple.com/docs/DOC-3141 -
Please help with the message I am receving on startup ""You can't open the application NovamediaDiskSupressor because PowerPC applications are no longer supported."
I have read some of the replies in the Apple Support Communities, but as I am no techie, I would have no idea how I would implement that solution.
Please help with what I need to type, how, where, etc.
Many thanks
AppleSueIn HunterCreekI am afraid there is no solution.
PowerPC refers to the processing chip used by Apple before they transferred to Intel chips. They are very different, and applications written only for PPC Macs cannot work on a Mac running Lion.
You could contact the developers to see if they have an updated version in the pipeline. -
Hi, please help with the installation of Lightroom 4, I bought a new Mac (Apple) and I want to install a software that I have on the album cd. My new computer does not have the drives. Can I download software from Adobe? Is my license number just to be able to download the srtony adobe.
Adobe - Lightroom : For Macintosh
Hal -
[ETL]Could you please help with a problem accessing UML stereotype attributes ?
Hi all,
Could you please help with a problem accessing UML stereotype attributes and their values ?
Here is the description :
-I created a UML model with Papyrus tool and I applied MARTE profile to this UML model.
-Then, I applied <<PaStep>> stereotype to an AcceptEventAction ( which is one of the element that I created in this model ), and set the extOpDemand property of the stereotype to 2.7 with Papyrus.
-Now In the ETL file, I can find the stereotype property of extOpDemand as follows :
s.attribute.selectOne(a|a.name="extOpDemand") , where s is a variable of type Stereotype.
-However I can't access the value 2.7 of the extOpDemand attribute of the <<PaStep>> Stereotype. How do I do that ?
Please help
Thank youHi Dimitris,
Thank you , a minimal example is provided now.
Version of the Epsilon that I am using is : ( Epsilon Core 1.2.0.201408251031 org.eclipse.epsilon.core.feature.feature.group Eclipse.org)
Instructions for reproducing the problem :
1-Run the uml2etl.etl transformation with the supplied launch configuration.
2-Open lqn.model.
There are two folders inside MinimalExample folder, the one which is called MinimalExample has 4 files, model.uml , lqn.model, uml2lqn.etl and MinimalExampleTransformation.launch.
The other folder which is LQN has four files. (.project),LQN.emf,LQN.ecore and untitled.model which is an example model conforming to the LQN metamodel to see how the model looks like.
Thank you
Mana -
Want a complete migration guide to upgrade 11.1.0.7 to 11.2.0.3 database using DBUA..We are implementing R12.1.3 version and then have to migrate the default 11gR1 database to 11.2.0.3 version. Please help with some step by step docs
Upgrade to 11.2.0.3 -- Interoperability Notes Oracle EBS R12 with Oracle Database 11gR2 (11.2.0.3) (Doc ID 1585578.1)
Upgrade to 11.2.0.4 (latest 11gR2 patchset certified with R12) -- Interoperability Notes EBS 12.0 and 12.1 with Database 11gR2 (Doc ID 1058763.1)
Thanks,
Hussein -
Welcome.
At the outset, I'm sorry for my English
Please help with configuration Photoshop CS6 appearance.
How to disable the background of the program so you can see the desktop. (same menus and tools)
i wantto be the same effect as CS5.Please try turning off
Window > Application Frame -
cont contact apple server error please help with ipad touch 4. im just fed up with apple please help me because why is it only apple with these kind of problems?
If you mean updae server
Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem
Otherwise what server are you talking about -
Purchased DVD in US for Cdn viewing. Digital download will not work in Cda or US? please help with new Digital code that will work
You will need to contact the movie studio that produced the DVD and ask if they can issue you a new code valid for Canada. Apple cannot help you, and everyone here in these forums is just a fellow user.
Regards. -
Please help with slideshow problems!
Am using Photoshop Elements 8 and trying to make a slideshow. Have tried 4 times now and keep ending up with same problem, cannot reopen project to continue edititing. Won't show up in orginizer and when I find on harddrive and try to open get message " wmv file cannot be opened". How can I save a
slideshow inprogress and be able to reopen and continue to edit and make slideshow? I want to thank anyone who can help me with this in advance as I
have gotten so frustrated that I want to just scream.
ThanksThanks for the help, thought I had done so but maybe not. Anyway will have another go at it, now may I ask another
question? I am trying to add audio to slideshow. I have some music I purchased thru amazon as mp3 files but I get
message no codec and when I try to add wmv I get same message. What type of file do I need and how can I add
multiple songs to one slideshow. I have one little wmv file that will go in, but it just replicates itself multiple times until
it fills slide show.
Thanks again, sorry to be a bother, but this thing is driving this old man crazy.
Date: Sun, 26 Dec 2010 20:34:32 -0700
From: [email protected]
To: [email protected]
Subject: Please help with slideshow problems!
You need to save the slideshow project in order to be able to go back later and make changes or additions to an existing slideshow . The wmv file is a final output format.
Now you are most probably using only the Output command: that is what makes the wmv file.
You should also do the Save Project command. (and I make it a practice to do the Save Project command before I do the Output command).
If you look at the Elements Organizer 8 Help, there is a topic on "Create a slide show".
-- Very close to the beginning of that topic is a screen shot of the Sldie Show Editor screen,
-- The bar below the usual menu bar is labeled with a "B" and called the Shortcuts bar.
-- The 1st entry on that Shortcuts bar is "Save Project"
It is the Save Project command that saves the information about which photos, audio, etc you placed in that specific slide show so that you can come back again to do subsequent editing. Save each Project with a unique name.
After completing the Save Project command, you shoud see an "icon" in the Organizer for that slide show.
Note: you must also keep the photo files and audio files which you have used in this slide show: you can't delete them because the project file does NOT contain a copy of the photos, it only has the identification and folder location of the photo and audio files.
> -
Hi. I have an iPhone 4s. The music doesn't play when I connect it to my car stereo. It used to play previously but stopped playing all of a sudden. My phone is getting charged when I cut it to the USB port. Please help with this. The iOS is 6.1.3.
Hello Priyanks,
I found an article with steps you can take to troubleshoot issues with an iPhone not connecting to your car stereo:
iOS: Troubleshooting car stereo connections
http://support.apple.com/kb/TS3581
Thank you for using Apple Support Communities.
Best,
Sheila M. -
My "fn" button is stuck on only revealing mission control in Lion. With this problem none of my "f" keys will work nor can I hold "fn" and delete to delete text in opposite direction. Can someone please help with this?
Following the fix here worked for me:
https://discussions.apple.com/message/15680566#15680566
except my plist file was in ~/Library instead of /Library.
-Scott -
hi, when i am listening music and the screen goes to sleep my music stop playing.Please help with settings
No problem. And no worries, several people have made this same mistake!
Either way enjoy the iPod!
Brock -
Hi there,
Had Infinity Broadband (option 2) and BT Vision Unlimited Extra installed yesterday; recevied the confirmation that it was all set up, installed and working correctly within a few hours of installation and thought all was fine.
Apparently, all is not fine and having spent most of the past two days on the phone with BT (not only for this issue but for other issues relating to the order itself) I am really at my wits end and totally fed up so I thought I would ask you guys for some input.
Basically, despite paying the £49 upgrade/installation fee for BT Vision Unlimited Extra I am only receiving FreeView channels and nothing else.
When I spoke to someone yesterday I was kept holding for over 90 minutes while the person just sat in total silence on the other end of the phone; not telling me what they were doing or why I wasn't getting the channels I was meant to be getting.
Eventually (after being put through to four different people), I was told that I would be put through to tech support and then the phone went dead, meaning I had to then call back and sit on hold once more. I was then told it was being escalated to a Tier 2 Technical Support team and that was all I was told. I was offered no explanation as to what could have happened, no explaination of what exactly Tier 2 Support was or when I would be contacted - nothing at all and the level of communication from the people I was speaking to was nothing short of awful.
By the time I got through to someone who actually understood my complaint I was frustrated and very upset having been on the phone for most of yesterday and I decided that BT Vision was just not worth the hassle or stress and given that I had only just had it installed yesterday I told the gentleman I was speaking to that I just wanted to cancel BT Vision under the 14 day cooling off period I believed most customers were entitled to only to be told that BT don't have that policy at all and if I wanted to cancel Vision I would have to pay £200 and that I should just wait for someone to contact me to see if there's a problem with the Vision box.
So, if you're still with me after all that then you deserve a drink!
Has anyone else had this problem and what was done to fix it? I don't want to be paying for a service I'm not actually getting!
Many thanks,
N.
Edited to add:
In case anyone needs to know, this is the equipment I have:
BT Home Hub 3.0 (wired to the white box and it right next to the TV)
BT Vision Plus box (connected to TV via HDMI cable, has an ariel lead straight into it, hard-wired to the Home Hub)
I have also tried the following as per BT's direction:
Unplugging each wire from the Home Hub, waiting 20 seconds and replacing
Rebooting Home Hub
Unplugging each wire from the BT Vision Plus box, waiting 30 seconds and replacing
Rebooting BT Vision Plus box
Resetting registration on BT Vision Plus box
Scanned for channels (three times)
There was a thread here that suggested going through the force resyncronisation but I don't have that option anywhere at all.
Solved!
Go to Solution.There are still no Extra channels.
I've now done a factory reset and it's telling me that there are no updates available.
This is the information under System Information for the Middleware Version:
Middleware Version number: 4.65.4 rev.1 512 Build: 243196 Jan 11 2013
This is a copy of the live chat I've just had to struggle though. The advisors name has been replaced with BT ADVISOR just in case names aren't allowed to be posted.
BT Advisor: Hello. I'm (name removed). Thanks for that information, I'll check it and get back to you in a moment.
Me:: OK.
Me:: I had BT Vision and Infinity Broadband (option 2) installed on Wednesday June 12th.
The Infinity is fine but I am still not receiving any of the EXTRA channels that I am paying for with the Vision Unlimited Extra package.
I have contacted BT multiple times since Wednesday and keep being fobbed off with "it's been escalated to a Tier 2 technician" and "someone will call you" and frankly I'm beyond fed up with this whole situation.
BT Advisor: (name removed), I'm just waiting for your account details to load. Won't be long.
Me:: I would like this sorted out today as I have now done everything I am able to to try and fix this - rebooting the home hub, rebooting the Vision box, resetting the Vision box and factory resetting the Vision box.
Me:: I have also called and asked the person I spoke to to send the correct update to the Vision box as it is not actually set up for any of the multicast channels - this update still has not happened.
BT Advisor: (name removed), I have checked the notes and seems that the Level 2 team tried to call you today between 10.30 - 11 am but was not able to reach you.
Me:: I have been home all morning - the telephone has not rung once.
BT Advisor: (name removed), at this moment let me know if the Hub and the BT Vision Box is on?
Me:: The Home Hub is one and the Vision Box is on standby
BT Advisor: Thank you.
Me:: I would like this to be fixed today.
BT Advisor: (name removed), I'm trying to fix it for you.
Me:: What exactly are you dong to fix this issue?
BT Advisor: When, I'm trying to run the test to check for the Update and send the correct update the box is showing as it is not connected to the internet.
Me:: It is connected to the Home Hub via the ethernet cable
Me:: The internet is on and running perfectly - the lead is in slot number 3 which is the one I was told to put it in previously
Me:: Where the ethernet cable is connected to the BT Vision Box there are two lights. One is green and steady, the other is yellow and blinking.
BT Advisor: Thank you.
BT Advisor: (name removed), I have checked with the level 2 Team and they have asked to perform the factory reset once again as the previous reset was not successful as after the reset the Box will automatically install the update.
BT Advisor: (name removed), I advise performing a factory reset of the Vision box.
When resetting the Vision box you will lose the recordings you have on the Vision box
If you able to start the Vision box please follow these steps:
1. Press BT Vision button on the remote control
2. Select Help and Settings
3. Select System Information and then select Factory Reset
4. When the Warning message appears select Reset
Me:: I will do this while you are here in case of any more problems.
BT Advisor: Ok
Me:: If this doesn't work what is the next step?
BT Advisor: This should work but if it does not that I will gte back to the Level 2 Team and update them that it has not worked.
Me:: Oops, there's been an error. Try again in a bit.
[VPE108]
Me:: This pops up before the screen to setup the Vision.
BT Advisor: That indicates that the Vision Box has not been reseted, just let me check what can be done.
BT Advisor: (name removed), I'm once again raising this case to the Technical Management Centre and they will definitely call you within the next 24 hrs.
Me:: No. I keep being told this and so far nobody has bothered to contact me at all. This issue needs to be sorted today or I shall be contacting OFCOM and any other regulatory body to raise this as an official complaint against BT.
BT Advisor: I apologise as you did not get a call back earlier but the Technical Management Centre will have to do some checks to see why you are not getting the extra channels and that will take some time.
BT Advisor: If you can provide me with a mobile that they can call you.
Me:: I am not getting the extra channels because the Vision box is not set up for MULTICAST CHANNELS. All that needs to be done is to have the correct software sent to the Vision Box. I do not think this will take 24 hours as yesterday I was told it would only take a maximum of 6 hours.
Me:: If I am not contacted today within a reasonable time frame I will take this further.
BT Advisor: (name removed), I do not assure that you will get a call back today but surely you will get a call back within the next 24 hours
Me:: By the way, the Vision Box IS connected to the Home Hub and the internet. There are still no updates available.
Me:: That is not good enough I'm afraid. I have been chasing BT to fix their error since Wednesday and still nobody has bothered to contact me as promised.
BT Advisor: (name removed), as you have tried to do it manually it is not updating the box so that is the reason why I'm raising the case to the Technical Management Centre.
Me:: Then that means that the box is faulty and as I have been told by the cancellation team that if the box is faulty I am able to cancel BT Vision I would like to do that now.
BT Advisor: The box is not faulty, its just that the update is not getting installed.
Me:: That is, by definition, a fault.
Me:: I am not arguing this further with you. Kindly put me in contact with someone who can either fix this immediately or the cancellation team.
BT Advisor: Unfortunately, there is no one who can fix it now you will have to wait.
Me:: Then put me in touch with your cancellation team.
BT Advisor: (name removed), the direct number for the Cancellations team is (removed number) you can call them on this number.
Me:: I will do that. Goodbye.
To be honest I'm feeling beyond fed up with this whole thing. I realize I was being a bit bolshy with this advisor but having been Mrs Nice Lady for the past two days I'm just letting my frustration out a bit.
Anyone else feel like banging their head against a brick wall?
Maybe you are looking for
-
AirPlay is available on iMac & iPhone 5, but not on iPhone 5S or 6
I have a Time Capsule, and 2 AirPort Express units, 1 of which is in my kitchen hooked up to a standard set of laptop speakers. Usually I stream music or radio through the kitchen Express via AirPlay, and have never had an issue until today. I tried
-
I send emails to a friend in Germany and he recieves it all garbled?
THis is what my email friend recieves when I send a normal email.!!!! Hi Brian I still can't read your e-mails but I thought you might want to read this at least https://uk.eurosport.yahoo.com/blogs/cow-corner/-missing--poster-in-australi a-risks-ups
-
I have used the Firefox troubleshooting guides, no good. The Java patch is enabled and shows when I check applications. However when I run Firefox plugins it still shows the java plug in is outdated and need to be updated immediately.
-
My Apple Clamshell does not switch on
Hi if anyone can help its be gratefull of any advice or tips. I recently got an ibook Clamshell (indigo firewire version) and have added a new touch pad, keyboard and hard drive. Ive got a charger for it and connection for the charger goes green then
-
In a report program, I have some write statements, and then I am calling another report using submit...export list to memory and return, then calling FM write_list. Why is the page number set to 1 for the list from memory even though I expect to see