Please review OS Builder scripts

Hi all,
I published my project here for building a system from scratch:
https://github.com/walterjwhite/OS-builder
It currently supports building Arch / Funtoo / Gentoo images. It will install software, configure the system (apply an overlay of configuration files), run configuration commands, setup users and groups I will have to show a sample 'system' configuration to illustrate how it works. I was looking for feedback regarding the scripts to see: 1, is there a similar thing that does a better job, 2, if the community would think it would be useful.
This is similar to the archiso / archbuild scripts but handles much more configuration on top of that. It still does have some hard-references, but it can be adapted.
I use this to periodically generate systems to use and at the same time keep a running backup of my system with all the configuration steps applied.
Thanks,
Walter

Similar Messages

Please review my firewall script

This script is for my server, please don't laugh I'm a beginner in this area
My policy is to close everything and open needed ports only. Authentic pinging should be allowed
#!/usr/bin/bash
# Please check for iptables path first.
IPTABLES="/sbin/iptables"
FWD=`cat /proc/sys/net/ipv4/ip_forward`
echo 0 > /proc/sys/net/ipv4/ip_forward
echo 30 > /proc/sys/net/ipv4/tcp_fin_timeout
echo 1800 > /proc/sys/net/ipv4/tcp_keepalive_intvl
# Flush the old tables
$IPTABLES -F
$IPTABLES -X
# Set default dropping policy
$IPTABLES -P INPUT DROP
$IPTABLES -P OUTPUT DROP
$IPTABLES -P FORWARD DROP
# Rules
# Allows incoming connections that are related to outgoing connection
$IPTABLES -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
$IPTABLES -A OUTPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
$IPTABLES -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT
# Block invalid ICMP packets
$IPTABLES -A INPUT -m state -p icmp --state INVALID -j DROP
$IPTABLES -A FORWARD -m state -p icmp --state INVALID -j DROP
$IPTABLES -A OUTPUT -m state -p icmp --state INVALID -j DROP
$IPTABLES -A FORWARD -m state -p icmp --state INVALID -j DROP
# Block NEW without SYN
$IPTABLES -A INPUT -p tcp ! --syn -m state --state NEW -j DROP
# Block fragments and Xmas tree as well as SYN,FIN, and SYN,RST
$IPTABLES -A INPUT -p ip -f -j DROP
$IPTABLES -A INPUT -p tcp --tcp-flags ALL ACK,RST,SYN,FIN -j DROP
$IPTABLES -A INPUT -p tcp --tcp-flags SYN,FIN SYN,FIN -j DROP
$IPTABLES -A INPUT -p tcp --tcp-flags SYN,RST SYN,RST -j DROP
# Allow ping
$IPTABLES -A INPUT -p icmp --icmp-type 11/1 -m state --state NEW -j ACCEPT
$IPTABLES -A INPUT -p icmp --icmp-type 11/0 -m state --state NEW -j ACCEPT
$IPTABLES -A INPUT -p icmp --icmp-type 0/0 -m state --state NEW -j ACCEPT
$IPTABLES -A INPUT -p icmp --icmp-type 8/0 -m state --state NEW -j ACCEPT
$IPTABLES -A INPUT -p icmp --icmp-type 3 -m state --state NEW -j ACCEPT
$IPTABLES -A INPUT -p tcp -m multiport --destination-port 22,80,443 -m state --state NEW -j ACCEPT
# Allow unlimited traffic on loopback
$IPTABLES -A INPUT -i lo -j ACCEPT
$IPTABLES -A OUTPUT -o lo -j ACCEPT
# Allow all outgoing connections
$IPTABLES -A OUTPUT -m state --state NEW -j ACCEPT
# Make sure nothing comes or goes out of this box
$IPTABLES -A INPUT -j DROP
$IPTABLES -A OUTPUT -j DROP
$IPTABLES -A FORWARD -j DROP
Are the seperating DROP rules redundant ? Setting standard dropping policy is enough, right ?

To my knowledge a package that does not match any rules will be matched against the default policy, so you do not have to drop everything explicitly.
And you have a double
# Block invalid ICMP packets
$IPTABLES -A FORWARD -m state -p icmp --state INVALID -j DROP
$IPTABLES -A FORWARD -m state -p icmp --state INVALID -j DROP
Which - if my previous statement is correct - you shouldn't need at all (the DROP rules, that is).
I don't get why you're specifying this again either:
# Make sure nothing comes or goes out of this box
$IPTABLES -A INPUT -j DROP
$IPTABLES -A OUTPUT -j DROP
$IPTABLES -A FORWARD -j DROP
You already set policies, to me this looks like twice the work...
Also, keep in mind iptables will treat the rules chronologically. So first you define what's allowed, then you define what's blocked. It will work its way down the rules until it finds a match, if not, it will resort to the default policy.
Edit: Bash is in /bin on Arch, not /usr/bin.

Please review the RMAN script and throw any comments which will increase KB

Dear Sirs:
I would be grateful if anyone in this forum checks whether the RMAN strategy taken by me is OK or require any room for improvement. I have not yet
moved into production.
Environment: ORACLE 10G R2 running on RAC, RHEL 4.0 for Intel Itanium. RMAN script runs every night at 10PM from node 1 of 2.
ASM is used and all datafiles, controlfiles, arc, redo in SAN
Process:
<1> Empty folder "PreviousdayBackup
<2> Move backup of yesterday night to "PreviousdayBackup"
<3> Execute RMAN the script provided below.
run {
     backup
          filesperset=15
          incremental level 0
          spfile format '/archive/backup/rman/spfile_%d_%s_%T.bak' tag 'spfile_backup'
          database format '/archive/backup/rman/data_%d_%s_%T.bak' tag 'full_data_backup';
          crosscheck backup;
          sql 'alter system archive log current';
          crosscheck archivelog all;
          backup filesperset 288 format '/archive/backup/rman/cscdb_data_archive_%d_%u' archivelog all delete input;
          delete archivelog all completed before 'sysdate-7';
          delete noprompt expired archivelog all;
          delete noprompt obsolete;
          backup current controlfile format '/archive/backup/rman/%d_data_control_%s_%p_%u' tag 'control_file';
The Tape runs at 3:00AM in the morning and takes all the files from '/archive/backup/rman/'
_*RMAN Configuration*_
CONFIGURE RETENTION POLICY TO REDUNDANCY 2;
CONFIGURE BACKUP OPTIMIZATION OFF;
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/archive/backup/rman/ctrl_%F';
CONFIGURE DEVICE TYPE DISK PARALLELISM 1 BACKUP TYPE TO BACKUPSET;
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1;
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1;
CONFIGURE MAXSETSIZE TO UNLIMITED;
CONFIGURE ENCRYPTION FOR DATABASE OFF;
CONFIGURE ENCRYPTION ALGORITHM 'AES128';
CONFIGURE ARCHIVELOG DELETION POLICY TO NONE;
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/oracle/product/1020/db_1/database/snapcf_cscdb1.f';
I am also not getting the concepts properly on :
delete archivelog all completed before 'sysdate-7';
delete noprompt expired archivelog all;
delete noprompt obsolete;
Is the delete within the RMAN pieces or within the folder. It would be great if someone can explain me on these
Awaiting for your kind response
Caesar
Edited by: caesar dutta on 10-May-2012 00:10

Hi emre baransel :
Step 1: Delete from folder "previousdaybackup"
Step 2: Move last night backup from "/archive/backup/rman" to "previousdaybackup"
Step 3: Run RMAN and backup is stored at "/archive/backup/rman"
Stpe 4: Data is backed up to DLT cartridge from "/archive/backup/rman"
The folder "/archive/backup/rman" is a separate partition from SAN mounted in the LINUX SYSTEM as ext3
Why did you chose filesperset=15, do you have specific purpose?Well I am looking at existing RMAN in the place and not changing any basic configuration. Frankly speaking I do not have answer to this.
I have changed the RMAN commands as
run {
     backup
          filesperset=15
          incremental level 0
          spfile format 'D:\archive\backup\rman\cscdb1\spfile_%d_%s_%T.bak' tag 'spfile_backup'
          database format 'D:\archive\backup\rman\cscdb1\data_%d_%s_%T.bak' tag 'full_data_backup';
          crosscheck backup;
          sql 'alter system archive log current';
          crosscheck archivelog all;
          backup filesperset 288 format 'D:\archive\backup\rman\cscdb1\cscdb_data_archive_%d_%u' archivelog all not backed up 2 times;
          delete noprompt archivelog all completed before 'sysdate-7';
          delete noprompt expired archivelog all;
          delete noprompt obsolete;
I feel that I will be in a safer side.
Please provide comments. Anything that will increase knowledge base and will educate others too in this forum.
regards,
caesar

How to use single ant build script to package the application with and without native extensions

Hi,
I am using iOS native extensions for Adobe air. For this I am listing the extensions in the application descriptor file. Since the package with native extensions are meant to run only on device, I want my build script to work without native extensions too to be able to run on simulator. Is this manadatory that I need two separate application descriptors/basically two build scripts to compile and package them? Please suggest and let me know if more explanation is needed.
Thanks,
Swathi.

Hi
This is a known issue addressed by CR205204
As you said, IBM actually does not have rt.jar in its JDK - they have moved contents of rt.jar into various jars.
IBM is not using org/apache/crimson/tree/ in their JDK at all.So the error shows up in the end of build even if it succeeds
You may need to add crimson.jar to wlwBuild classpath, since it is not part of IBMs JDK.
Note: the build will work even w/o crimson.jar giving a non build related IDE exception in the very end.
Thanks
Vimala

Error while running ant build script from cmd line -ORABPEL-01005

Hi to all,
I am newbie to BPEL, I did a sample application SyncHelloWorldBPEL application in Jdev and I deployed it application server everything looks good.
When I ran the same ant build script from command line it throw me bunch of complation error.
Anyone please help me out
bpel.init:
[echo]
[echo] --------------------------------------------------------------
[echo] | Intializing BPEL Process....
[echo] --------------------------------------------------------------
[echo]
[echo] ----------------------------------------
[echo] | Loading Dependency Jar Files : C:\Oracle\JDeveloper\integration\lib\orabpel-ant.jar;C:\Oracle\JDeveloper\integration\lib\orabpel.jar;C:\Oracle\JDeveloper\integration\lib\orabpel-thirdparty.jar;C:\Oracle\JDeveloper\integration\lib\oracle_http_client.jar;C:\Oracle\JDeveloper\integration\lib\orabpel-common.jar;C:\Oracle\JDeveloper\integration\lib\orabpel-exts.jar;C:\Oracle\JDeveloper\integration\lib\connector15.jar;C:\Oracle\JDeveloper\integration\lib\commons-codec-1.3.jar;C:\Oracle\JDeveloper\lib\xmlparserv2.jar;C:\Oracle\JDeveloper\lib\xml.jar;C:\Oracle\JDeveloper\webservices\lib\orawsdl.jar
[echo] ----------------------------------------
validateTask:
[echo]
[echo] --------------------------------------------------------------
[echo] | Validating BPEL workflow
[echo] --------------------------------------------------------------
[echo]
[validateTask] Validation of workflow task definitions is completed without errors
compile.bpel:
[echo]
[echo] --------------------------------------------------------------
[echo] | Compiling bpel process SyncHelloWorld, revision 2.0
[echo] | Class Path : C:\Oracle\JDeveloper\integration\lib\orabpel-ant.jar;C:\Oracle\JDeveloper\integration\lib\orabpel.jar;C:\Oracle\JDeveloper\integration\lib\orabpel-thirdparty.jar;C:\Oracle\JDeveloper\integration\lib\oracle_http_client.jar;C:\Oracle\JDeveloper\integration\lib\orabpel-common.jar;C:\Oracle\JDeveloper\integration\lib\orabpel-exts.jar;C:\Oracle\JDeveloper\integration\lib\connector15.jar;C:\Oracle\JDeveloper\integration\lib\commons-codec-1.3.jar;C:\Oracle\JDeveloper\lib\xmlparserv2.jar;C:\Oracle\JDeveloper\lib\xml.jar;C:\Oracle\JDeveloper\webservices\lib\orawsdl.jar
[echo] --------------------------------------------------------------
[echo]
[bpelc] validating "C:\AMG\CI_Project\SyncHelloWorldBPEL\.\bpel\SyncHelloWorld.bpel" ...
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:51: Invalid escape character.
[bpelc] __NSPrefixMap.put("bpws", "http:\/\/schemas.xmlsoap.org\/ws\/2003\/03\/business-process\/");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:51: Invalid escape character.
[bpelc] __NSPrefixMap.put("bpws", "http:\/\/schemas.xmlsoap.org\/ws\/2003\/03\/business-process\/");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:51: Invalid escape character.
[bpelc] __NSPrefixMap.put("bpws", "http:\/\/schemas.xmlsoap.org\/ws\/2003\/03\/business-process\/");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:51: Invalid escape character.
[bpelc] __NSPrefixMap.put("bpws", "http:\/\/schemas.xmlsoap.org\/ws\/2003\/03\/business-process\/");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:51: Invalid escape character.
[bpelc] __NSPrefixMap.put("bpws", "http:\/\/schemas.xmlsoap.org\/ws\/2003\/03\/business-process\/");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:51: Invalid escape character.
[bpelc] __NSPrefixMap.put("bpws", "http:\/\/schemas.xmlsoap.org\/ws\/2003\/03\/business-process\/");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:51: Invalid escape character.
[bpelc] __NSPrefixMap.put("bpws", "http:\/\/schemas.xmlsoap.org\/ws\/2003\/03\/business-process\/");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:52: Invalid escape character.
[bpelc] __NSPrefixMap.put("xp20", "http:\/\/www.oracle.com\/XSL\/Transform\/java\/oracle.tip.pc.services.functions.Xpath20");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:52: Invalid escape character.
[bpelc] __NSPrefixMap.put("xp20", "http:\/\/www.oracle.com\/XSL\/Transform\/java\/oracle.tip.pc.services.functions.Xpath20");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:52: Invalid escape character.
[bpelc] __NSPrefixMap.put("xp20", "http:\/\/www.oracle.com\/XSL\/Transform\/java\/oracle.tip.pc.services.functions.Xpath20");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:52: Invalid escape character.
[bpelc] __NSPrefixMap.put("xp20", "http:\/\/www.oracle.com\/XSL\/Transform\/java\/oracle.tip.pc.services.functions.Xpath20");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:52: Invalid escape character.
[bpelc] __NSPrefixMap.put("xp20", "http:\/\/www.oracle.com\/XSL\/Transform\/java\/oracle.tip.pc.services.functions.Xpath20");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:52: Invalid escape character.
[bpelc] __NSPrefixMap.put("xp20", "http:\/\/www.oracle.com\/XSL\/Transform\/java\/oracle.tip.pc.services.functions.Xpath20");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:53: Invalid escape character.
[bpelc] __NSPrefixMap.put("ns1", "http:\/\/xmlns.oracle.com\/bpel\/workflow\/xpath");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:53: Invalid escape character.
[bpelc] __NSPrefixMap.put("ns1", "http:\/\/xmlns.oracle.com\/bpel\/workflow\/xpath");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:53: Invalid escape character.
[bpelc] __NSPrefixMap.put("ns1", "http:\/\/xmlns.oracle.com\/bpel\/workflow\/xpath");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:53: Invalid escape character.
[bpelc] __NSPrefixMap.put("ns1", "http:\/\/xmlns.oracle.com\/bpel\/workflow\/xpath");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:53: Invalid escape character.
[bpelc] __NSPrefixMap.put("ns1", "http:\/\/xmlns.oracle.com\/bpel\/workflow\/xpath");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:54: Invalid escape character.
[bpelc] __NSPrefixMap.put("ldap", "http:\/\/schemas.oracle.com\/xpath\/extension\/ldap");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:54: Invalid escape character.
[bpelc] __NSPrefixMap.put("ldap", "http:\/\/schemas.oracle.com\/xpath\/extension\/ldap");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:54: Invalid escape character.
[bpelc] __NSPrefixMap.put("ldap", "http:\/\/schemas.oracle.com\/xpath\/extension\/ldap");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:54: Invalid escape character.
[bpelc] __NSPrefixMap.put("ldap", "http:\/\/schemas.oracle.com\/xpath\/extension\/ldap");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:54: Invalid escape character.
[bpelc] __NSPrefixMap.put("ldap", "http:\/\/schemas.oracle.com\/xpath\/extension\/ldap");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:55: Invalid escape character.
[bpelc] __NSPrefixMap.put("xsd", "http:\/\/www.w3.org\/2001\/XMLSchema");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:55: Invalid escape character.
[bpelc] __NSPrefixMap.put("xsd", "http:\/\/www.w3.org\/2001\/XMLSchema");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:55: Invalid escape character.
[bpelc] __NSPrefixMap.put("xsd", "http:\/\/www.w3.org\/2001\/XMLSchema");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:55: Invalid escape character.
[bpelc] __NSPrefixMap.put("xsd", "http:\/\/www.w3.org\/2001\/XMLSchema");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:56: Invalid escape character.
[bpelc] __NSPrefixMap.put("ns3", "http:\/\/www.oracle.com\/XSL\/Transform\/java\/oracle.tip.esb.server.headers.ESBHeaderFunctions");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:56: Invalid escape character.
[bpelc] __NSPrefixMap.put("ns3", "http:\/\/www.oracle.com\/XSL\/Transform\/java\/oracle.tip.esb.server.headers.ESBHeaderFunctions");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:56: Invalid escape character.
[bpelc] __NSPrefixMap.put("ns3", "http:\/\/www.oracle.com\/XSL\/Transform\/java\/oracle.tip.esb.server.headers.ESBHeaderFunctions");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:56: Invalid escape character.
[bpelc] __NSPrefixMap.put("ns3", "http:\/\/www.oracle.com\/XSL\/Transform\/java\/oracle.tip.esb.server.headers.ESBHeaderFunctions");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:56: Invalid escape character.
[bpelc] __NSPrefixMap.put("ns3", "http:\/\/www.oracle.com\/XSL\/Transform\/java\/oracle.tip.esb.server.headers.ESBHeaderFunctions");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:56: Invalid escape character.
[bpelc] __NSPrefixMap.put("ns3", "http:\/\/www.oracle.com\/XSL\/Transform\/java\/oracle.tip.esb.server.headers.ESBHeaderFunctions");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:57: Invalid escape character.
[bpelc] __NSPrefixMap.put("ns2", "http:\/\/xmlns.oracle.com\/bpel\/services\/IdentityService\/xpath");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:57: Invalid escape character.
[bpelc] __NSPrefixMap.put("ns2", "http:\/\/xmlns.oracle.com\/bpel\/services\/IdentityService\/xpath");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:57: Invalid escape character.
[bpelc] __NSPrefixMap.put("ns2", "http:\/\/xmlns.oracle.com\/bpel\/services\/IdentityService\/xpath");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:57: Invalid escape character.
[bpelc] __NSPrefixMap.put("ns2", "http:\/\/xmlns.oracle.com\/bpel\/services\/IdentityService\/xpath");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:57: Invalid escape character.
[bpelc] __NSPrefixMap.put("ns2", "http:\/\/xmlns.oracle.com\/bpel\/services\/IdentityService\/xpath");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:57: Invalid escape character.
[bpelc] __NSPrefixMap.put("ns2", "http:\/\/xmlns.oracle.com\/bpel\/services\/IdentityService\/xpath");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:58: Invalid escape character.
[bpelc] __NSPrefixMap.put("bpelx", "http:\/\/schemas.oracle.com\/bpel\/extension");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:58: Invalid escape character.
[bpelc] __NSPrefixMap.put("bpelx", "http:\/\/schemas.oracle.com\/bpel\/extension");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:58: Invalid escape character.
[bpelc] __NSPrefixMap.put("bpelx", "http:\/\/schemas.oracle.com\/bpel\/extension");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:58: Invalid escape character.
[bpelc] __NSPrefixMap.put("bpelx", "http:\/\/schemas.oracle.com\/bpel\/extension");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:59: Invalid escape character.
[bpelc] __NSPrefixMap.put("client", "http:\/\/xmlns.oracle.com\/SyncHelloWorld");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:59: Invalid escape character.
[bpelc] __NSPrefixMap.put("client", "http:\/\/xmlns.oracle.com\/SyncHelloWorld");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:59: Invalid escape character.
[bpelc] __NSPrefixMap.put("client", "http:\/\/xmlns.oracle.com\/SyncHelloWorld");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:60: Invalid escape character.
[bpelc] __NSPrefixMap.put("ora", "http:\/\/schemas.oracle.com\/xpath\/extension");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:60: Invalid escape character.
[bpelc] __NSPrefixMap.put("ora", "http:\/\/schemas.oracle.com\/xpath\/extension");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:60: Invalid escape character.
[bpelc] __NSPrefixMap.put("ora", "http:\/\/schemas.oracle.com\/xpath\/extension");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:60: Invalid escape character.
[bpelc] __NSPrefixMap.put("ora", "http:\/\/schemas.oracle.com\/xpath\/extension");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:61: Invalid escape character.
[bpelc] __NSPrefixMap.put("orcl", "http:\/\/www.oracle.com\/XSL\/Transform\/java\/oracle.tip.pc.services.functions.ExtFunc");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:61: Invalid escape character.
[bpelc] __NSPrefixMap.put("orcl", "http:\/\/www.oracle.com\/XSL\/Transform\/java\/oracle.tip.pc.services.functions.ExtFunc");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:61: Invalid escape character.
[bpelc] __NSPrefixMap.put("orcl", "http:\/\/www.oracle.com\/XSL\/Transform\/java\/oracle.tip.pc.services.functions.ExtFunc");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:61: Invalid escape character.
[bpelc] __NSPrefixMap.put("orcl", "http:\/\/www.oracle.com\/XSL\/Transform\/java\/oracle.tip.pc.services.functions.ExtFunc");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:61: Invalid escape character.
[bpelc] __NSPrefixMap.put("orcl", "http:\/\/www.oracle.com\/XSL\/Transform\/java\/oracle.tip.pc.services.functions.ExtFunc");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:61: Invalid escape character.
[bpelc] __NSPrefixMap.put("orcl", "http:\/\/www.oracle.com\/XSL\/Transform\/java\/oracle.tip.pc.services.functions.ExtFunc");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:62: Invalid escape character.
[bpelc] __NSPrefixMap.put("", "http:\/\/schemas.xmlsoap.org\/ws\/2003\/03\/business-process\/");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:62: Invalid escape character.
[bpelc] __NSPrefixMap.put("", "http:\/\/schemas.xmlsoap.org\/ws\/2003\/03\/business-process\/");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:62: Invalid escape character.
[bpelc] __NSPrefixMap.put("", "http:\/\/schemas.xmlsoap.org\/ws\/2003\/03\/business-process\/");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:62: Invalid escape character.
[bpelc] __NSPrefixMap.put("", "http:\/\/schemas.xmlsoap.org\/ws\/2003\/03\/business-process\/");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:62: Invalid escape character.
[bpelc] __NSPrefixMap.put("", "http:\/\/schemas.xmlsoap.org\/ws\/2003\/03\/business-process\/");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:62: Invalid escape character.
[bpelc] __NSPrefixMap.put("", "http:\/\/schemas.xmlsoap.org\/ws\/2003\/03\/business-process\/");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:62: Invalid escape character.
[bpelc] __NSPrefixMap.put("", "http:\/\/schemas.xmlsoap.org\/ws\/2003\/03\/business-process\/");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:78: Invalid escape character.
[bpelc] __pl.put("partnerLinkType", new javax.xml.namespace.QName("http:\/\/xmlns.oracle.com\/SyncHelloWorld", "SyncHelloWorld", "client"));
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:78: Invalid escape character.
[bpelc] __pl.put("partnerLinkType", new javax.xml.namespace.QName("http:\/\/xmlns.oracle.com\/SyncHelloWorld", "SyncHelloWorld", "client"));
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:78: Invalid escape character.
[bpelc] __pl.put("partnerLinkType", new javax.xml.namespace.QName("http:\/\/xmlns.oracle.com\/SyncHelloWorld", "SyncHelloWorld", "client"));
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:115: Invalid escape character.
[bpelc] __initiatePartnerLinkQNames[0] = new javax.xml.namespace.QName( "http:\/\/xmlns.oracle.com\/SyncHelloWorld", "SyncHelloWorld", "client" );
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:115: Invalid escape character.
[bpelc] __initiatePartnerLinkQNames[0] = new javax.xml.namespace.QName( "http:\/\/xmlns.oracle.com\/SyncHelloWorld", "SyncHelloWorld", "client" );
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:115: Invalid escape character.
[bpelc] __initiatePartnerLinkQNames[0] = new javax.xml.namespace.QName( "http:\/\/xmlns.oracle.com\/SyncHelloWorld", "SyncHelloWorld", "client" );
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:146: Invalid escape character.
[bpelc] return new javax.xml.namespace.QName("http:\/\/xmlns.oracle.com\/SyncHelloWorld", "SyncHelloWorld", "client");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:146: Invalid escape character.
[bpelc] return new javax.xml.namespace.QName("http:\/\/xmlns.oracle.com\/SyncHelloWorld", "SyncHelloWorld", "client");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:146: Invalid escape character.
[bpelc] return new javax.xml.namespace.QName("http:\/\/xmlns.oracle.com\/SyncHelloWorld", "SyncHelloWorld", "client");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:151: Invalid escape character.
[bpelc] return new javax.xml.namespace.QName("http:\/\/xmlns.oracle.com\/SyncHelloWorld", "SyncHelloWorld", "client");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:151: Invalid escape character.
[bpelc] return new javax.xml.namespace.QName("http:\/\/xmlns.oracle.com\/SyncHelloWorld", "SyncHelloWorld", "client");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:151: Invalid escape character.
[bpelc] return new javax.xml.namespace.QName("http:\/\/xmlns.oracle.com\/SyncHelloWorld", "SyncHelloWorld", "client");
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:192: Invalid escape character.
[bpelc] msgVar.setMessageType(new javax.xml.namespace.QName("http:\/\/xmlns.oracle.com\/SyncHelloWorld", "SyncHelloWorldRequestMessage", "client"));
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:192: Invalid escape character.
[bpelc] msgVar.setMessageType(new javax.xml.namespace.QName("http:\/\/xmlns.oracle.com\/SyncHelloWorld", "SyncHelloWorldRequestMessage", "client"));
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:192: Invalid escape character.
[bpelc] msgVar.setMessageType(new javax.xml.namespace.QName("http:\/\/xmlns.oracle.com\/SyncHelloWorld", "SyncHelloWorldRequestMessage", "client"));
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:196: Invalid escape character.
[bpelc] part.setElement(new javax.xml.namespace.QName("http:\/\/xmlns.oracle.com\/SyncHelloWorld", "SyncHelloWorldProcessRequest", "client"));
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:196: Invalid escape character.
[bpelc] part.setElement(new javax.xml.namespace.QName("http:\/\/xmlns.oracle.com\/SyncHelloWorld", "SyncHelloWorldProcessRequest", "client"));
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:196: Invalid escape character.
[bpelc] part.setElement(new javax.xml.namespace.QName("http:\/\/xmlns.oracle.com\/SyncHelloWorld", "SyncHelloWorldProcessRequest", "client"));
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:203: Invalid escape character.
[bpelc] xml = "<SyncHelloWorldProcessRequest xmlns=\"http:\/\/xmlns.oracle.com\/SyncHelloWorld\"\/>\r\n";
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:203: Invalid escape character.
[bpelc] xml = "<SyncHelloWorldProcessRequest xmlns=\"http:\/\/xmlns.oracle.com\/SyncHelloWorld\"\/>\r\n";
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:203: Invalid escape character.
[bpelc] xml = "<SyncHelloWorldProcessRequest xmlns=\"http:\/\/xmlns.oracle.com\/SyncHelloWorld\"\/>\r\n";
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:203: Invalid escape character.
[bpelc] xml = "<SyncHelloWorldProcessRequest xmlns=\"http:\/\/xmlns.oracle.com\/SyncHelloWorld\"\/>\r\n";
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:211: Invalid escape character.
[bpelc] msgVar.setMessageType(new javax.xml.namespace.QName("http:\/\/xmlns.oracle.com\/SyncHelloWorld", "SyncHelloWorldResponseMessage", "client"));
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:211: Invalid escape character.
[bpelc] msgVar.setMessageType(new javax.xml.namespace.QName("http:\/\/xmlns.oracle.com\/SyncHelloWorld", "SyncHelloWorldResponseMessage", "client"));
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:211: Invalid escape character.
[bpelc] msgVar.setMessageType(new javax.xml.namespace.QName("http:\/\/xmlns.oracle.com\/SyncHelloWorld", "SyncHelloWorldResponseMessage", "client"));
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:215: Invalid escape character.
[bpelc] part.setElement(new javax.xml.namespace.QName("http:\/\/xmlns.oracle.com\/SyncHelloWorld", "SyncHelloWorldProcessResponse", "client"));
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:215: Invalid escape character.
[bpelc] part.setElement(new javax.xml.namespace.QName("http:\/\/xmlns.oracle.com\/SyncHelloWorld", "SyncHelloWorldProcessResponse", "client"));
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:215: Invalid escape character.
[bpelc] part.setElement(new javax.xml.namespace.QName("http:\/\/xmlns.oracle.com\/SyncHelloWorld", "SyncHelloWorldProcessResponse", "client"));
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:222: Invalid escape character.
[bpelc] xml = "<SyncHelloWorldProcessResponse xmlns=\"http:\/\/xmlns.oracle.com\/SyncHelloWorld\">\r\n <result\/>\r\n<\/SyncHelloWorldProcessResponse>\r\n";
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:222: Invalid escape character.
[bpelc] xml = "<SyncHelloWorldProcessResponse xmlns=\"http:\/\/xmlns.oracle.com\/SyncHelloWorld\">\r\n <result\/>\r\n<\/SyncHelloWorldProcessResponse>\r\n";
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:222: Invalid escape character.
[bpelc] xml = "<SyncHelloWorldProcessResponse xmlns=\"http:\/\/xmlns.oracle.com\/SyncHelloWorld\">\r\n <result\/>\r\n<\/SyncHelloWorldProcessResponse>\r\n";
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:222: Invalid escape character.
[bpelc] xml = "<SyncHelloWorldProcessResponse xmlns=\"http:\/\/xmlns.oracle.com\/SyncHelloWorld\">\r\n <result\/>\r\n<\/SyncHelloWorldProcessResponse>\r\n";
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:222: Invalid escape character.
[bpelc] xml = "<SyncHelloWorldProcessResponse xmlns=\"http:\/\/xmlns.oracle.com\/SyncHelloWorld\">\r\n <result\/>\r\n<\/SyncHelloWorldProcessResponse>\r\n";
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:234: Invalid escape character.
[bpelc] __pl.setPartnerLinkType(new javax.xml.namespace.QName( "http:\/\/xmlns.oracle.com\/SyncHelloWorld", "SyncHelloWorld" ) );
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:234: Invalid escape character.
[bpelc] __pl.setPartnerLinkType(new javax.xml.namespace.QName( "http:\/\/xmlns.oracle.com\/SyncHelloWorld", "SyncHelloWorld" ) );
[bpelc] ^
[bpelc] C:\AMG\CI_Project\SyncHelloWorldBPEL\.\deploy\temp\bpelc38101.tmp\BPEL-INF\src\bpel\synchelloworld\BPEL_BIN.java:234: Invalid escape character.
[bpelc] __pl.setPartnerLinkType(new javax.xml.namespace.QName( "http:\/\/xmlns.oracle.com\/SyncHelloWorld", "SyncHelloWorld" ) );
[bpelc] ^
[bpelc] Too many errors. (The limit on reported errors is 100.)
[bpelc] 126 errors
[bpelc] ORABPEL-01005
[bpelc]
[bpelc] Failed to compile classes.
[bpelc] Failed to compile the generated BPEL classes for "SyncHelloWorld".
[bpelc]      at com.collaxa.cube.lang.compiler.CubeProcessor.compileGeneratedClasses(CubeProcessor.java:972)
[bpelc]      at com.collaxa.cube.lang.compiler.CubeProcessor.transformClientSide(CubeProcessor.java:572)
[bpelc]      at com.collaxa.cube.lang.compiler.CubeProcessor.transformClientSide(CubeProcessor.java:457)
[bpelc]      at com.collaxa.cube.lang.compiler.CubeParserHelper.compileClientSide(CubeParserHelper.java:83)
[bpelc]      at com.collaxa.cube.ant.taskdefs.Bpelc.execute(Bpelc.java:626)
[bpelc]      at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
[bpelc]      at sun.reflect.GeneratedMethodAccessor1.invoke(Unknown Source)
[bpelc]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[bpelc]      at java.lang.reflect.Method.invoke(Method.java:585)
[bpelc]      at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:105)
[bpelc]      at org.apache.tools.ant.Task.perform(Task.java:348)
[bpelc]      at org.apache.tools.ant.Target.execute(Target.java:357)
[bpelc]      at org.apache.tools.ant.Target.performTasks(Target.java:385)
[bpelc]      at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1329)
[bpelc]      at org.apache.tools.ant.Project.executeTarget(Project.java:1298)
[bpelc]      at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
[bpelc]      at org.eclipse.ant.internal.ui.antsupport.EclipseDefaultExecutor.executeTargets(EclipseDefaultExecutor.java:32)
[bpelc]      at org.apache.tools.ant.Project.executeTargets(Project.java:1181)
[bpelc]      at org.eclipse.ant.internal.ui.antsupport.InternalAntRunner.run(InternalAntRunner.java:423)
[bpelc]      at org.eclipse.ant.internal.ui.antsupport.InternalAntRunner.main(InternalAntRunner.java:137)
BUILD FAILED
C:\AMG\CI_Project\SyncHelloWorldBPEL\build.xml:127: ORABPEL-01005

More precisely its porblem with commons-lang package
I am using commons-lang 2.4.jar file due to this it generated above error.
I reverted it back to earlier version now its working with apache ant 1.7.0

Problems deploying ear file created with ant build script

Hi All,
I'm using Jdeveloper 11G and Weblogic 10.3. When I build my application and run it within Jdeveloper, it works fine. However, we have a requirement to run ANT build script and create a deployable .ear file that can be manually deployed to any Weblogic Server.
I created my ant build script and it compiles/builds fine - the .ear file looks good. However, when I attempt to deploy it, it fails with
javax.faces.webapp.FacesServlet for servlet Faces Servlet could not be loaded because the requested class was not found in the classpath .
java.lang.ClassNotFoundException: javax.faces.webapp.FacesServlet.
     at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:551)
     at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1985)
     at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1959)
     at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1878)
     at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3153)
     Truncated. see log file for complete stacktrace
>
<Nov 2, 2011 2:43:43 PM MDT> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1320266599219' for task '3'. Error is: 'weblogic.application.ModuleException: [HTTP:101216]Servlet: "Faces Servlet" failed to preload on startup in Web application: "###"
I am not sure how to tell weblogic where to find the classes needed. I have a pretty huge classpath used when compiling - should I be putting the classpath in the manifest (?) - I don't think I should need to include the .jar files manually in the .ear file - since all the libraries should already be available in weblogic - or is that a misconception?
Please help!!

I answered my own question -
I had to manually add the following to the WEB-INF/lib to get the error to go away:
${ORACLE_HOME}/modules/javax.jsf_1.1.0.0_1-2.jar and
${ORACLE_HOME}/oracle_common/modules/oracle.jsf_1.2.9/glassfish.jsf_1.0.0.0_1-2-15.jar and
${ORACLE_HOME}/oracle_common/modules/oracle.jsf_1.2.9/glassfish.jstl_1.2.0.1.jar
that solved my problem. However, I think it'd be great if I could somehow just specify (in the weblogic-application.xml maybe?) that my application is using the above modules without having to copy the jar files into my WEB-INF/lib - any suggestions?
Thanks

Too Late to process the annotation in the build script.

Hi,
My build script is taking 17 to 18 mins for processing the annotation.
<property name="aggregated.factory.class" value="com.bea.workshop.controls.runtime.generator.AggregatedAnnotationProcessorFactory" />
<apt sourcepath="${java.sourcepath}" srcdir="${.java.src.dir}" listfiles="true" includes="${.java.src.include}" excludes="${.java.src.exclude}" destdir="${.java.src.output}" preprocessdir="${apt.src.output.dir}" classpathref="java.classpath" factory="${aggregated.factory.class}" factorypathref="apt.factory.path" options="${apt.options}" compile="false" memoryinitialsize="512m" memoryMaximumSize="1024m" fork="true" />
This particular line is executed for 17 to 18 mins. The Command prompt will be ideal for those 18 mins with the below message:
[apt] warning: Annotation types without processors: [java.lang.SuppressWarnings, java.lang.Override, org.apache.beehive.controls.system.jdbc.JdbcContr
ol.ConnectionDataSource, org.apache.beehive.controls.system.jdbc.JdbcControl.SQL, com.bea.control.annotations.TransactionAttribute, com.bea.p13n.controls.se
curityProvider.GroupProviderControl.GroupProviderParams, com.bea.p13n.controls.securityProvider.UserProviderControl.UserProviderParams]
Do any one faced similar issue. Please help me to reduce my build time.
Thanks,
Arvinth

As Kal mentioned
I have set verbose="true" in the build script and tried executing the build. I could observe that the time is consumed for the
[apt] [loading com/bea/control/interceptors/TransactionInterceptor.class(com/bea/control/interceptors:TransactionInterceptor.class)]
and
[apt] [loading java/util/SortedSet.class(java/util:SortedSet.class)]
and
[apt] [loading org/apache/commons/validator/ValidatorResults.class(l/commons/validator:ValidatorResults.class)]
which takes 3 mins each. Am not sure why this loads the dependent jars at the compile time. I think some where I have set the .jar files in the path.
In the log I could see there are aroud three pages of jar file path in the continuation to the resources.jar below.
[apt] [search path for class files: /apps/bea/platform/10.3.0/jdk160_05/jre/lib/resources.jar, ....
is there any issue setting the path.
Can you help me.
Thanks,
Arvinth

Someone with x86_64 please try to build handbrake-svn [SOLVED]

I've been going nuts trying to build this package on my x86_64 system: http://aur.archlinux.org/packages.php?ID=29320
See the errors I posted in the AUR. Basically, it builds just fine on a i686 chroot but not on my native x86_64 machine.
1) Can someone with an x86_64 machine please try to build it and let me know if it errors out or completes successfully?
2) Any thoughts why it would fail on one arch but work just fine on the other?
EDIT: Nevermind... problem wasn't with the arch at all, it was with my /tmp having a noexec mount option!
Last edited by graysky (2010-11-03 23:43:18)

It builds on my x86_64 machine. The dependencies I didn't have initially installed but that were downloaded and installed after issuing 'makepkg -s': yasm-1.0.1-1, libsigsegv-2.6-1, texlive-bin-2010.1-4, texlive-core-2010.19888-2
==> Tidying install...
-> Purging other files...
-> Compressing man and info pages...
-> Stripping unneeded symbols from binaries and libraries...
==> WARNING: Package contains reference to $srcdir
==> Creating package...
-> Generating .PKGINFO file...
-> Adding install script...
-> Compressing package...
==> Leaving fakeroot environment.
==> Finished making: handbrake-svn 3644-1 (Wed Nov 3 19:38:47 EDT 2010)
Last edited by thisoldman (2010-11-03 23:54:03)

[svn:osmf:] 11993: Add build scripts

Revision: 11993
Revision: 11993
Author:   [email protected]
Date:     2009-11-19 10:44:08 -0800 (Thu, 19 Nov 2009)
Log Message:
Add build scripts
Added Paths:
    osmf/branches/flex4/build/
    osmf/branches/flex4/build/build.xml
    osmf/branches/flex4/build/paths.properties
    osmf/branches/flex4/build/svn_sync.cmd

DanielW wrote:
elocal wrote:
great stuff, thanks!
so far the only really bad thing i've noticed in kde4 is the slow performance while accessing websites under kde4's konqueror, it is really slow looking up and loading the websites. Must be some dns or ipv6 bug...
Am I correct that you are using an AVM or AVM built OEM router? (the may be some from other vendors affected too).
Its a well known bug an easy workaround not using your local router for DNS but the DNS from your provider (in your resolv.conf) or for example the one from opendns. Another workaround is to use a local dns proxy.
The bug is: http://bugs.kde.org/show_bug.cgi?id=154774 but it is closed now, as it has nothing to do with konqueror.
Further discussion about it is here: http://bugs.kde.org/show_bug.cgi?id=162600
Please tell what router you are using.
Yea i figured it out earlier. I am using the modem's IP as the dns, and telling dhcpcd not to modify resolv.conf. But even with epiphany or firefox, if i use my router as the DNS it feels slower, not as slow as kde4/konqueror, but it is slower than if I use my modem's IP (or the ISP DNS) in resolv.conf.
My router is an old Netgear WGR614 v4. Besides the slow DNS lookups, it is giving me some other issues with wireless encryption... it is about time to upgrade it i guess...
Thanks for the info.

How to mark build as partially succeed from pre-build script

Hello,
is there a way how to mark build as partially succeed from pre-build script?
And, also insert some text in Build Summary? (Other Errors and Warnings area will be fine)
I was trying to use "Write-Error "My Test Error" -ErrorAction SilentlyContinue" but it is not working.
Thanks,
Jiri

Hi Jiri,
I think John's reply in this thread will be helpful to you. The short answer is that your pre-build script should return a value to indicate whether the script success or not. Modify the TFS build process template via adding BuildDetail.Status = BuildStatus.Failed
activity when the script failed.
Please check this link for the details:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/aacc32f1-bc29-4a85-bff3-4be1a43542e6/build-continues-after-prebuild-script-fails?forum=tfsbuild
And if you want to insert some error or warning message on the TFS build summary page, you needs to modify the TFS build process template as well. Please check:
http://blogs.msdn.com/b/buckh/archive/2012/06/07/how-to-customize-the-build-summary-page-in-tfs-2012-without-a-plug-in.aspx
Thanks.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

ANT build script to deploy .EAR file SAP NetWeaver Web Application Server

Can any one please tell me to deploy the .ear file with ANT build script in SAP NetWeaver Web Application Server.
Thanks in advance.
Regards,
Venkat.

Try these threads:
Re: Is there a way to start a J2EE application per command line?
Scripted WAS App Start Stop Deploy

Ant build script for a WebCenter Portal Application

Hi,
I have created a basic WebCenter Portal Application in jdeveloper. I want to create a war file of this application using ant build script.
Created a build.xml file using the "Buildfile from project" option from the New Gallery option.
Can anyone help me to code the portion in the build.xml file, where I can create a war file...
Currently the bild.xml file has all the libraries reffered in it and also the following code
<target name="init">
<tstamp/>
<mkdir dir="${output.dir}"/>
</target>
<target name="all" description="Build the project" depends="compile,copy"/>
<target name="clean" description="Clean the project">
<delete includeemptydirs="true" quiet="true">
<fileset dir="${output.dir}" includes="**/*"/>
</delete>
</target>
<target name="compile" description="Compile Java source files" depends="init">
<javac destdir="${output.dir}" classpathref="classpath"
debug="${javac.debug}" nowarn="${javac.nowarn}"
deprecation="${javac.deprecation}" encoding="Cp1252" source="1.6"
target="1.6">
<src path="src"/>
</javac>
</target>
<target name="copy" description="Copy files to output directory"
depends="init">
<patternset id="copy.patterns">
<include name="**/*.gif"/>
<include name="**/*.jpg"/>
<include name="**/*.jpeg"/>
<include name="**/*.png"/>
<include name="**/*.properties"/>
<include name="**/*.xml"/>
<include name="**/*.ejx"/>
<include name="**/*.xcfg"/>
<include name="**/*.cpx"/>
<include name="**/*.dcx"/>
<include name="**/*.sva"/>
<include name="**/*.wsdl"/>
<include name="**/*.ini"/>
<include name="**/*.tld"/>
<include name="**/*.tag"/>
<include name="**/*.xlf"/>
<include name="**/*.xsl"/>
<include name="**/*.xsd"/>
</patternset>
<copy todir="${output.dir}">
<fileset dir="src">
<patternset refid="copy.patterns"/>
</fileset>
</copy>
</target>
Please help. Thanks in advance.

After creating the build.xml file as mentioned above for my WebCenter Portal application, When I try to run the login.jspx page, it is unseccessful . It throws me an error
[10:53:44 AM] #### Deployment incomplete. ####
[10:53:44 AM] Remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)
#### Cannot run application TestBuildApplication due to error deploying to IntegratedWebLogicServer.
[Application TestBuildApplication stopped and undeployed from Server Instance IntegratedWebLogicServer]
Created another sample WebCenter Portal application without selecting Ant in project technologies and then when I run the login.jspx of that application, it was success. The page opened properly.
What can be the issue for this?

Ant build script for SOA application

Hi All,
I am trying to write a build script to handle deployments from the Linux server which host the SOA environment. Also, I am using Subversion as my version control on a different machine. I found a sample example of building using ant script, but this is applicable if the source code is based locally. But what if it is in remote version control
ant -f ant-sca-package.xml
-DcompositeDir=C:\po\POProcessing\POProcessing
-DcompositeName=POProcessing
-Drevision=1.0
-Dscac.application.home=C:\po\POProcessing
Please suggest how to go with the build script.
Thanks
Jigo

Has anybody tried getting the source code from subversion for ant build of a SOA composite.
Thanks

LV8: Tools- "convert build script" - shortcuts fail

When I convert a LV7 Build Script into a LV8 project using the built-in conversion wizard, it works quite well, except for the Installer. It is created as a blank spec (which is no big drama since I know that this is one area that has been improved in LV8), but there is one small thing. I am unable to add any Start Menu Shortcuts (clicking on the + button does nothing at all). I also notice that I am unable to set any folder as the default installation folder (in the Source Files tab). I can edit the project file manually myself and add in the shortcuts and set the default directory, and then all is well - I can add further shortcuts, define the default folder etc. But obviously it would be nice not to have to do this. It has happened on several build scripts - every one I that have converted, so I don't think it is anything perculiar to my Labview programs.
Has anyone else noticed this?

Hi Andy,
I have also face a similar problem, when I tried to use the "Convert build Script" Utility in LV 8, while converting a build script, originally built using LV 5.1 .I too am not being able to add shortcuts, to the new installer.
Addtionally, I am facing the problem of my installer build being unsuccessful. I have created the exe successfully, and have tried building the installer, with the LV 8, and with no extra components. But i get the same error. Could you please identify the problem?\
Thanks a lot in advance,
dasi
Attachments:
Installer problem.jpg ‏35 KB

I cannot sign in. "This Apple ID has not yet been used with the iTunes Store. Please review your account information." I click "Review", next message "You must turn on cookies to continue.   Cookies must be enabled if you want to create or edit.. etc."

I applied and received an upgrade code to Redeem Mountain Lion for my new MBP.
I get this message when I try to Sign in to the App Store after entering the redemption content code, and also if I just try to "Sign In".   The first part of the error is true - I haven't used the AppleID with the iTunes store.
I received the upgrade code using this same AppleID, so I don't think I can use a different AppleID.
I also tried to re-create this appleID...(it was one suggestion I saw for this issue) It doesn't let me since the ID already exists...
The error is:
"This Apple ID has not yet been used with the iTunes Store. Please review your account information." I click "Review", next message "You must turn on cookies to continue.   Cookies must be enabled if you want to create or edit.. etc."
It's clearly not a cookie issue..   Stuck...

The first part of the error is true - I haven't used the AppleID with the iTunes store.
Try here > Using an existing Apple ID with the iTunes Store and Mac App Store
received the upgrade code using this same AppleID, so I don't think I can use a different AppleID.
Correct.
It's clearly not a cookie issue..
As for cookies. Quit the App Store. Now open the Finder. From the Finder menu bar click Go > Go to Folder.
Type this exactly as you see it here:   ~/Library/Cookies
Click Go the move the   com.apple.appstore.plist   file from the Cookies folder to the Trash.
Relaunch the App Store.

Please review OS Builder scripts

Similar Messages

Maybe you are looking for